Pillar Drilling Machine

ALZMETALL AB 3 ES

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 28 mm throat 290 mm Kdslhcdswk N Raowysn bore stroke 180 mm table surface area 515 x 300 mm spindle taper MT 3 spindle turning speed range 65 - 1750 U/min boring spindle diameter 40 mm table adjustable in height 562 mm table swivelable 360 ° distance between table/spindle 79 / 641 mm weight of the machine ca. 0,4 t dimensions of machine L x W x H 0,70 x 0,40 x 1,80 m - machine out of teaching shop -

Condition: used, Year of construction: 1988, Drilling capacity in steel St 60 28 mm Drilling capacity in cast iron GG 20 35 mm Drilling capacity in St 60 35 mm Spindle mount MT 3 Throat 290 mm Quill stroke 160 mm Table stroke 592 mm Column diameter 115 mm Clamping area 510 x 300 mm Spindle speed 130-1750 rpm Kjlhewgkyujcdwyjdn Machine weight approx. 400 kg

Condition: used, ALZMETALL column drilling machine type AB 3 ES Mach. No. 21703, year of manufacture 1981 Drilling capacity 32 mm Spindle mount MK 3 - long spindle Thrust 290 mm Spindle stroke 160 mm Table size 510 x 300 mm Column diameter 115 mm Spindle speed 55 - 1450 rpm. stepless Kjlhcdwovu Dv Heysdn Motor power 0.9 and 1.3 kW, pole-changing Mains connection on the type plate 500 volts, 50 Hz. Mains connection tested 400 volts, 50 Hz. - tested without power restriction - Spindle speed via 2 gear stages, 2 motor speeds and stepless via variator gear - Countershaft stage for high torque at low speeds - Tachometer for the spindle speed - Table height adjustment via hand crank - Machine light - Emergency stop via foot switch and impact switch - Keyless drill chuck 1 to 13 mm Space requirement L x W x H 1200 x 650 x 1900 mm Weight 400 kg very good condition Machine tested with drill Ø 30mm in steel - runs very well

Condition: good (used), Alzmetall AB 3 ES - Pillar drill Kelhcdsvtzrvewyedn -Drilling capacity / steel 35mm -Thrust 280mm -Drilling stroke 180mm -MK 3 mount -Table size 600x470mm -Continuous speed control -Drilling depth stop -Drill chuck -Documentation Dimensions: LxWxH1.2x0.8x2.1 meters / weight 550 kg Errors / input errors reserved

Condition: used, bore capacity in steel (diameter) 28 mm throat 285 mm bore stroke 150 mm table-size 620 x 470 mm Column diameter 130 mm spindle turning speed - stepless 110-2900 U/min spindle taper MK 3 Kslhcdjwnt D Sjwyodn feed 0,1 / 0,2 / 0,3 mm/U. Drive 1,47 kW weight of the machine ca. 380 kg dimensions of the machine ca. 0,85 x 0,6 x 1,8 m Machine with infinitely variable speed control, 2-stage gearbox, aut. feed and base plate with flutes. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1967, bore capacity in steel (diameter) 28 mm throat 290 mm Kelhcswlvkcjdwyedn bore stroke 160 mm table surface area 620 x 470 mm spindle taper MT 3 spindle turning speed range 80 - 1420 U/min quill feed 0,1 - 0,2 - 0,3 mm/U boring spindle diameter 40 mm table adjustable in height 562 mm table swivelable 360 ° distance between table/spindle 79 / 641 mm weight of the machine ca. 0,5 t dimensions of machine L x W x H 0,70 x 0,40 x 1,80 m - machine out of teaching shop -

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 30/35 mm throat 300 mm bore stroke 140 mm table-size 700 x 500 mm spindle taper MT 3 number of spindle speeds 65 - 1750 UpM Kdjlhcdwou Rt Hqjyon total power requirement 1,7 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1 x 1 x 2 m Pillar drilling machine.

Year of construction: 1955, Condition: ready for operation (used), Drilling capacity: 40mm, spindle mount: MK4, drill chuck: 1mm-13mm, throat depth: 250mm, quill stroke: 160mm, table dimensions X/Y: 620mm/470mm, column diameter: 120mm, spindle speed: 1420rpm. Machine dimensions X/Y/Z: approx. 900mm/725mm/1800mm, weight: approx. 615kg. The on/off switch of the machine must be replaced. An on-site inspection is possible. Kdolhcdowlt Nvewysn

Condition: used, Year of construction: 1975, bore capacity in steel (diameter) 35.0 mm bore capacity in cast iron 40.0 mm throat 300 mm bore stroke 180 mm turning speeds 65 - 1750 U/min table-size 425 x 500 mm column diameter 155 mm feed 0.1-0.2-0.3 m/min spindle taper MT 4 MK engine output 0.9 / 1.5 kW weight 450 kg range L-W-H 800 x 650 x 1850 mm Machine from a vocational school Kslhcev Dxwqodwyedn good / well-maintained condition (!!) Equipment: - robust motor-driven pillar drill with VARIO drive (V-belt) - electro-automatic spindle feed - pole-changing motor - stepless speed adjustment (VARIO drive) - adjustable drilling depth stop - machine table with 2x T-slots * height adjustable via hand crank - 1x used machine vice - machined base plate - coolant device - connection cable + connection plug - original operating instructions

Condition: used, Year of construction: 1976, bore capacity in steel (diameter) 28 mm throat 290 mm bore stroke 160 mm table surface area 500 x 370 mm Kslhcdwjwli H Deyjdn spindle taper MT 3 spindle turning speed range 65 - 1750 U/min quill feed 0,1 - 0,2 - 0,3 mm/U boring spindle diameter 40 mm table adjustable in height 562 mm table swivelable 360 ° distance between table/spindle 79 / 641 mm weight of the machine ca. 0,5 t dimensions of machine L x W x H 0,70 x 0,40 x 1,80 m - machine out of teaching shop - Accessories: coolant