Injection molding machine

Arburg und Husky

Condition: like new (used), Year of construction: 2017, operating hours: 16,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 720A3200-800/70 Baujahr: 2017 Schließkraft: 320 Tonnen Holmabstand 720 x 720 mm Lhjdpfxsv S E Dgj Aa Ieg Einbauhöhe min. /max.: 300 - 800 mm Öffnungsweg: 600 mm Schnecken DN 1: 50 mm Max. Hubvolumen: 392 cm³ Spritzteilgewicht in PS: 359 g Schnecke DN 2: 22 mm Max. Hubvolumen: 34 cm³ Spritzteilgewicht in PS: 31 g Steuerung: Selogica Technische Ausstattung anfordern.

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm Lhodpfxep Audqe Aa Ijg INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: as good as new (ex-display), Year of construction: 2026, SRF master figure left 2 m suction arm Scope of application Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Lodpfxedqzbrs Aa Iohg Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: ready for operation (used), Hello, we offer used Erowa Powerchuck with pallets. They have been cleaned and checked by us. In addition, a functional test was carried out. The chucks have the usual signs of wear, but are technically in good condition. Individual purchase also possible. Wide range of pallets available. Lhsdpfoiq Iy Ijx Aa Ijg Do you have any questions? Then we are at your disposal. Shipping is possible.

Condition: used, Good day, We are offering used clamping devices from Erowa. These are part of the Erowa UPC system and are suitable for die-sinking EDM and milling. The following parts are available: ER-048377 UPC Alignment pallet Erowa T-slot pallet 320x320 Base body made of aluminum, bars hardened and ground. ER-016917 UPC Aluminum pallet 320 x 320 x 40 with clamping bar They have been cleaned and checked by us. A functional test was also carried out. The clamping devices have signs of use and are technically in very good condition. Individual acceptance also possible. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us. Lhjdpfx Astk Hakoa Ijg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3379284, General Data Measurements width 1,650 mm Measurements depth 2,234 mm Measurements height 2,580mm Machine weight 3,600 kg Ledpfx Aaeudy Hus Iohg Control System: Simens 840D solutionline Movement X-Axis Movement 700 mm Y-Axis Movement 400 mm Z-Axis Movement 485 mm Workpiece Workpiece weight 400 kg Table Outer length 840 mm Outer width 420 mm IPG Laser 100W

Condition: excellent (used), Year of construction: 2003, Arburg 420C-800-250 Closing 80 tons Scrow 30 mm year 2003 Lhedpfxopdr Dco Aa Iog Spars wide 42x42 Spray weight 97 g

Condition: ready for operation (used), Year of construction: 2016, operating hours: 37,049 h, clamping force: 4,000 kN, overall weight: 21,000 kg, This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for precision in plastic injection molding. Contact us for more information about this machine. Clamping unit • Locking force (max.): 150 kN • Opening force (max.): 100 kN / increased: 800 kN • Opening stroke (max.): 700 mm • Mold height (min.): 350 mm • Distance between platens (max.): 1050–1550 mm • Clear tie bar distance: 820 × 820 mm • Mold mounting platens (W × H): 1171 × 1171 mm • Mold half weight (max.): 4500 kg • Ejector force (max.): 100 kN • Ejector stroke (max.): 250 mmHydraulics / drive / miscellaneous • Hydraulic pump drive power: 55 kW • Installed total power: • 4000-2100: 88.9 kW • 4000-3200: 96.2 kW • Color: Plastic-coated structure (light gray / mint green / rapeseed yellow) • Control cabinets: Safety regulation DIN EN 60204 • Socket combination: 1 Schuko + 1 Cekon • Injection unit power supply: 1 × 16 AInjection unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Theoretical shot volume (max., cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Shot weight (max., g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Injection pressure (max., bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Injection flow rate (max., cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Injection flow rate with accumulator (max., cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Back pressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Screw circumferential speed (max., m/s): 0.38 | 0.28 | 0.28 • Screw torque (max., Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Nozzle contact force (max.): 110 kN • Nozzle stroke (max.): 600 mm Ledpfx Aoydpvboa Ishg • Heating zones / heating capacity: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heating: 1000 W | 1250 WDimensions and weights (base machine) • Clearance length: 490 mm • Electrical connection (fuse protection) motor + heating: 250 A • Electrical connection (fuse protection) motor: 125 A • Electrical connection (fuse protection) heating: 50 / 63 A Additional equipment • SEPRO SR AXESS 30 S3 robot (2008)

Condition: ready for operation (used), Year of construction: 2020, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 172 g, This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Clamping unit • Distance between tie bars: 570 × 570 mm • Opening stroke: 650 mm • Ejector force: 70 kN • Ejector stroke: 200 mmInjection unit • Injection unit size: 290 • Injection pressure: 2,500 bar • Shot volume: 188 cm³Drive & control • Drive system: Hydraulic • Control system: ARBURG Selogica Ledpfx Aasx Nkp Ij Ishg

Condition: good (used), Year of construction: 2001, operating hours: 56,380 h, functionality: fully functional, machine/vehicle number: 184172, clamping force: 1,300 kN, Used injection moulding machine The machine has a complete service history, including all major repairs and component replacements—hoses, etc. Manufacturer: Arburg Model: 420C 1300-350 Year: 2001 Machine no.: 184172 Control: Selogica Operating hours: 56,380 h Continuous maintenance by the manufacturer Clamping Unit Clamping force: 1300 kN / 130 tons Tie bar distance: 420 x 420 mm Platen size: 570 x 570 mm Ejector stroke: 175 mm / 40 kN Opening stroke: 500 mm Mould installation height: 250 mm Maximum platen distance: 750 mm Injection Unit Injection volume: 145 ccm Shot weight: 127 g Screw diameter: 35 mm Injection pressure: 2500 bar Extras - Hydraulic core pull - Robot interface - Dosing interface - Position-regulated screw - Highly wear-resistant screw cylinder - CF card drive - Extended monitoring: movement monitoring, input monitoring, clamping program, production control, job change, optimisation, freely configurable page, production protocol, setup protocol Lodevimd Nepfx Aa Ijhg - Immediately available in our warehouse in Hannover, loaded free onto truck or delivered free within Germany against reimbursement of freight cost - Function-tested (function guaranteed up to initial commissioning)