Wire eraser

CHARMILLES robofil 2030 SI

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 124322, workpiece weight (max.): 500 kg, travel distance X-axis: 318 mm, travel distance Y-axis: 218 mm, travel distance Z-axis: 114 mm, TECHNICAL DETAILS X-axis travel: 318 mm Y-axis travel: 218 mm Z-axis travel: 114 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Control system: PC-based, 14" color monitor, MS-DOS Tap pitch/height: ±30° / 65 mm Working area Type: Tray with swing door Max. workpiece dimensions (W × D × H): 1,130 × 510 × 260 mm Door width: 1,010 mm Max. workpiece weight: 500 kg Table dimensions (W × D): 560 × 440 mm Distance from floor to table: 1,050 mm Volume of the Dielectric capacity: 240 l Dielectric level control: Automatic Wire EDM system Wire diameter: 0.10 – 0.25 mm Wire guide type: Diamond-enclosed guide, zero backlash Programmable wire unwinding speed: 0.2 to 15 m/min Programmable wire tension: 0.3 to 3 daN Permissible spool weight and type (according to DIN): 1.6 kg Permissible spool weight and type (according to JIS): 3 kg Used wire recycling: Wire shredding at the rear Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic rethreading for wire diameters: 0.070 to 0.300 mm Minimum threading hole diameter: 0.300 mm for 0.250 mm wire Dielectric Type: Deionized Water Total dielectric volume: 900 l Dielectric temperature: ±0.5 °C Cartridge filters: 16 Deionization resin volume: 30 l Deionization control: Automatic Number of deionization bottles: 3 Injection pressure range: 0 – 20 bar Gbelhcjv Tpnrodwvon Number of programmable pressure levels: 16 Generator Max. processing speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: Steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Machine dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm Weight (without dielectric): 4,400 kg Input voltage: 380/400 V Power consumption: 12 kVA

Condition: refurbished (used), Year of construction: 2001, Functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, net weight: 2,450 kg, Charmilles Robofil 240 Year of manufacture 2001 Travel distances (X / Y / Z): 350 x 220 x 220 mm Travel distances (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed of 300 mm²/min Best surface: Ra 0.22 µm Golhcdowqdrrowvjbn Available wire diameters: 0.10 mm to 0.33 mm Dimensions of the complete system: 2020 x 2050 x 2000 mm Total weight of the system: 2450 kg The machine is cleaned, overhauled, and tested by us before delivery. We are happy to offer you the commissioning of the machine.

Year of construction: 2007, Condition: ready for operation (used), General Data Measurements width 2810 mm Measurements depth 2600 mm Measurements height 2080 mm Machine weight 4450 kg Main Drive Number of axis 3 Movement X-Axis Movement 550 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Workpiece Workpiece X 1200 mm Workpiece Y 400 mm Gslhcjwnuufodwvjbn Workpiece Z 700 mm Workpiece weight 1500 kg Injection Unit Injection pressure 2/4/8/13 bar This 3-axis CHARMILLES Robofil 440 CC was manufactured in 2007 and features a robust design with a total system weight of 4450 kg when filled with dielectric. It can handle workpieces up to 1500 kg, with maximum dimensions of 1200 x 700 x 400 mm. Ideal for precision wire EDM processes, this machine offers a comprehensive control system with a TFT 12" screen. If you are looking to get high-quality EDM capabilities consider the CHARMILLES Robofil 440 CC machine we have for sale. Contact us for more information. Application Types EDM

Condition: good (used), Year of construction: 2005, The technical data and illustrations are not binding. They do not constitute guaranteed characteristics and are subject to change. Gbslhjwnfh Njcdwvon

Year of construction: 1998, Condition: good (used), Charmilles Technologies Robofil 510 EDM machine TECHNICAL DATA Control cabinet Generator type: Isopulse Max. Ambient temperature: 30°C Software storage time: 100 hours Maximum charging time: 60 hours Disk type: 3 ½ '' Number of storable programs: 112 Dimensions: 1800 x 650 x 1000 mm Cooling air: 800 m3/h at 30°C Maximum discharge current: 45 A Graphic color screen: 14 16-bit microprocessor: 3 Machine Machine bed: polymer concrete dimensions: 2100 x 2050 x 2230 mm Weight: 3800 kg Access door dimensions: 1220 mm Workpiece Maximum dimension, workpiece: 1200 x 700 mm Maximum height of the workpiece: 400 mm Maximum load: 1000 kg Travels X-axis: 700 mm Y-axis: 400 mm Z-axis: 400 mm U-axis: 700 mm V-axis: 400 mm Measuring resolution: 0.5 μm Maximum manual speed: 15 mm/s Wire Wire diameter: 0.1 to 0.3 mm Speed: adjustable from 0 to 15 m/min Mechanical tension: adjustable from 0 to 30 N Clearance angle: adjustable from 0° to 30 Maximum height for threading: 300 mm Automatic threading (2 mm): Yes Automatic rethreading: Yes Bobbins: K125 (4 kg) / K160 (8 kg) / K200 (16 kg) Dielectric Deionization: Resin mixture, 20 l Tank type: waterproof steel sheet, welded dimensions: 2030 x 1420 mm Capacity: 450 l Filter system: 10 Flushing, pressure: 0 to 11,5 bar External connections Power Mains frequency: 50 Hz Cos. PHI: 0.8 Three-phase input voltage: 380 V / 400 V Permissible fluctuations: +10% to -15 Allowable micro-interruptions: 4 ms Connected load: 10 KVA Inrush current: 10 KVA Cooling Minimum pressure difference between inlet and outlet of the cooling source: 2 bars Maximum pressure at inlet: 5 bars Maximum flow rate: 25 l/min Air Pressure range: From 6 to 7 bars Capacity: 1 l/min General data Permissible ambient temperature: 20°C +- 1° C Permissible air humidity: 40 to 80 Gelhcdwektf S Hovobn Noise level: 72 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Condition: good (used), Year of construction: 2004, X-axis travel - 400mm Y-axis travel - 300mm Gbelhcdwjv Sw Hgevsn Z-axis travel - 250mm Worktank length - 980 mm Worktank width - 730 mm Worktank height - 250 mm

Condition: used, Year of construction: 2004, Wire erosion / EDM Travel distance X: 350 mm Travel distanceY :220 mm Travel distance z: 220 mm max. workpiece size X: 1000 mm max. workpiece size Y: 550 mm max. workpiece size Z: 220 mm max. workpiece weight: 750 kg table size X: 680 mm table size Y: 450 mm with AWF ( Automatic Wire Feeding ) Golhcdwevyzgaevsbn U / V axis: 350mm / 220mm submerged

Condition: refurbished (used), Year of construction: 2011, Functionality: fully functional, Charmilles Robofil 440 CCS Year of manufacture 2011 Charmilles Millenium control system Travel (X / Y / Z): 550 x 350 x 400 mm Travel (U / V): 550 x 350 mm Max. Taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2810 x 2240 mm Total weight of the system: 3300 kg The machine is cleaned and overhauled by us after receipt of order and tested for all functions. We are also happy to carry out an individual test cut for you. We offer the following services on request: - Commissioning of the machine at your premises - Warranty of 6 months - Control training Gbslsvdt Epshcdwven - Accessories such as coolers and clamping devices

Year of construction: 2002, operating hours: 44,266 h, Condition: ready for operation (used), Main Drive Number of axis 3 Movement X-Axis Movement 550 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Workpiece Workpiece X 1200 mm Workpiece Y 700 mm Gelhswl Ru Ascdwvebn Workpiece Z 400 mm Table Table load 1000 kg This 3-axis CHARMILLES Robofil 440 was manufactured in 2002. Ideal for precision wire EDM tasks, this machine offers robust performance and reliability. If you are looking to get high-quality EDM capabilities, consider the CHARMILLES Robofil 440 machine we have for sale. Contact us for more information. Application Types EDM

Year of construction: 2006, Condition: ready for operation (used), General Data Measurements width 2810 mm Measurements depth 2600 mm Measurements height 2240 mm Gbslhewhguwscdwvjn Machine weight 3300 kg Movement X-Axis Movement 550 Y-Axis Movement 350 Z-Axis Movement 400 Table Outer length 900 mm Outer width 600 mm This 3-axis CHARMILLES Robofil 440SL was manufactured in 2006. A robust wire EDM machine, it features a large processing area with dimensions of 1200 x 700 x 400 mm and supports part weights up to 1500 kg. Its table measures 900 x 600 mm, and the X, Y, Z axes are 550 mm, 350 mm, and 400 mm respectively. If you are looking to get high-quality EDM capabilities, consider the CHARMILLES Robofil 440SL machine we have for sale. Contact us for more information. Application Types EDM