Cutting mills

Dreher S 60/65 SRV GF

Condition: used, machine/vehicle number: 12769, Rotor diameter: 340 mm Rotor width: 520 mm 6-knife rotor 2 rows stator knives Iielsl U Hbhshcdw Neb Inlet cross section approx. 350 x 500 mm Drive motor: 22 kW

Condition: used, Year of construction: 2011, Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Iiolhcdweuqfa Ie Nsb Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: used, machine/vehicle number: 12768, Rotor diameter: 340 mm Rotor width: 520 mm 4-knife rotor 2 rows stator knives Iolol U Hbdjhcdw Neib Inlet cross section approx. 340 x 520 mm Drive motor: 18.5 kW

Condition: used, Price: On request Granulator Dreher S26/26 VS Machine No. K 8329 Built in 1982 Engine 5.5kW Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Islhcdwswh Naie Noib Funnel opening: 360x240 mm Interchangeable strainer Sieve holes 6mm - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Functionality: fully functional, Mill with extraction, sound-absorbing housing and all-metal separator Power 4 kW Iiolhcovzzx Eedw Neb All functions tested and fully functional!

Condition: like new (used), Year of construction: 1990, Plastic waste recycling chipper. Good condition, no vibration, no extraneous sounds. We export in any direction Iiolhcdwsui R H Ds Nsb

Condition: used, machine/vehicle number: 12464, Rotor diameter: 420 mm Rotor width: 650 mm Iolekyy U Uehcdw Neib 5-knife rotor 2 rows stator knives Inlet cross section approx. 420 x 650 mm Drive motor: 37 kW

Condition: used, Price: On request Iiolhcdwowh Nacj Nsb - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, machine/vehicle number: 12139, Rotor diameter: 260 mm Iielhcdwshqt Hpe Nob Rotor width: 410 mm 3-blade rotor 2 rows of stator blades Inlet cross-section approx. 400 x 500 mm Drive motor: 7.5 kW

Condition: used, Price: On request Shredder Dreher S20/20 Ielhcdewh I Uxow Njib No.:K2740 Funnel opening: 310mm x 340mm Motor: 3kW 6.3 Amps 380 Voltage - Main motor power [kW]: 3.0 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, machine/vehicle number: 11648, Roller feeder on the hopper Rotor blade rows: 3 Ijlhcdsghgqpow Noib Stator blade rows: 2 Rotor width: 520 mm Rotor diameter: 340 mm Inlet dimensions: 500 x 350 mm

Condition: used, machine/vehicle number: 11375, Rotor diameter: 340 mm Rotor width: 410 mm Iioljghgm Tohcdw Nob 3 rotor blades, 2 rows of stator blades Inlet cross-section approx. 340 x 410 mm Granulator with integrated sound insulation. Ideal for plastics processing on blow molding, injection molding, and extrusion lines

Condition: used, machine/vehicle number: 11415, Rotor diameter: 260 mm Rotor width: 260 mm 3-blade rotor, 2 rows of stator blades Inlet cross-section approx. 260 x 260 mm Ijlhcdsghgl Iow Neib Drive motor 5.5 kW Grinding mill with built-in feeder for bar stock. Weight approx. 500 kg

Condition: used, machine/vehicle number: 12884, Rotor diameter: 260 mm Iislhcdswbwqpsw Njb Rotor width: 410 mm Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 410 x 260 mm Drive motor: 11 kW

Condition: good (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 1125575, travel distance X-axis: 400 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 360 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 100 m/min, nominal power (apparent): 8 kVA, torque: 10 Nm, controller model: HEIDENHAIN iTNC 530, workpiece weight (max.): 120 kg, table width: 450 mm, table length: 550 mm, table load: 120 kg, rotational speed (max.): 42,000 rpm, spindle speed (min.): 42,000 rpm, spindle nose: HSK-E63, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, Centrum obróbcze GF MASCHINNING MIKRON MILL S 500 zbudowane w 2016 roku, przeznaczone jest do ELEKTROD Z GRAFITU o wadze 120 kg. Gabaryt stołu 450mmx550mm.Maszyna posiada trzy numerycznie sterowane osie o posuwach odpowiednio 400 mm (X), 500 mm (Y) i 360 mm (Z) oraz posuwach przyśpieszonych 100 m/min. Wrzeciono z maksymalnymi obrotami 42 000 obr./min wyposażone w chłodzenie i stożek HSK-E63, dodatkowe urządzenie jakości, precyzję oraz główne skrócenie procesu frezowania. Maszyna wyposażona jest w sterownik CNC HEIDENHAIN iTNC 530, który umożliwia pełne działanie nad pracą maszyn. Całkowity ciężar frezarki wynosi 6800 kg. Centrum GF MASCHINNING MIKRON MILL S 500 wyposażone jest dodatkowo: Iielhcjv Rpidedw Njb odkurzacz do grafitu, sondę pomiarową BLUM,

Operating hours: 6,650 h, Condition: good (used), machine/vehicle number: Delta 34/41, Please refer to the pictures and video for the condition and contents of the offer. The system is currently disassembled. Iolhcdwetudxdj Njib The device/system offered here has been tested and is fully functional and ready for use. The purchase price includes VAT. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid Ust. Indent. No. Subject to prior sale. Visit our website and take a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), Year of construction: 1999, operating hours: 37,400 h, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 78 cm³, injection pressure: 2.2 bar, overall weight: 2,350 kg, This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-150/60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 30 mm Iiolerg Hcyshcdw Nsb - Injection pressure: 2,200 Bar - Shot volume: 78 cm³ - Working hours: 37,400

Condition: excellent (used), Year of construction: 2006, The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany. Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Ielhcewk If Aodw Neib Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm

Year of construction: 2024, Condition: new, SPECIAL ACTION: Folding press AD-S 1260 Ielhcded R Dhpsw Neib length/width/height: 2300mm/1550mm/2850mm Weight: 47000 kg Bending force: 60 tons bending length: 1250 mm Passage between stands: 1050 mm Stroke:160mm Installation height: 530 mm Throat: 450 mm table height: 900 mm table width: 104 mm Y High speed: 200 mm/sec. Y Working speed: 10 mm/sec. Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Europ. lower tool M.460R.85 (one of them in pitch) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC controlled motorized crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guidance along the entire line Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Stop finger 2 pieces With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information upon request.

Year of construction: 2004, Condition: ready for operation (used), Additional Equipment Removal: W701-0142 2x Temperature Control Units: Series 4 Iolhcdwjwkar Ij Nsib This Arburg Allrounder 270 S 250-60 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision in small-scale production. Consider the opportunity to buy this Arburg Allrounder 270 S 250-60 hydraulic injection moulding machine. Contact us for further details regarding this machine. Application Types Injection Moulding

Condition: new, Year of construction: 2024, neu 2024 9734 prompt, Zwischenverkauf v Spanien Iislhowirnxjcdw Nsb 21800 € 446.9 € 1 1 60 to 250 mm 5 40 x 11 mm 32 1/min 350 x 15 mm 120 x 10 mm 45 / 40 mm 10 mm max. 150x10 mm 5.5 kW 1850 mm 1300 mm 2100 mm 1390 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES!

Condition: used, Year of construction: 2006, Panel length: 2.500 mm Panel width: 1.300 mm Daylight opening: 400 mm Number of daylights: 1 Total pressure: 60 t Total pressure t: 2 kg/cm² Number of cylinders: 4 Operating temperature max: 130 °C Diameter cylinder: 80 mm Heating power: 17,8 kW Heating plates: electrical Heating top/bottom seperately: Yes Material of the platen: anodised aluminium Ielhowh U Skecdw Neib Parallel guidance by toothed rack: Yes Pressing time programmable: Yes Safety device: Yes Pressing force: electrohydraulic Type: Upstroking press Conformity marking: CE mark Total connection: 19 kW Weight: 4.100 kg Space requirement Length: 2,92 m Space requirement Width: 1,49 m Space requirement Height: 1,87 m

Condition: good (used), Year of construction: 2003, Ref. no.: 18330 Hersteller: ARBURG Type: 320 S 500-150 /60 with turntable Year of construction: 2003 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 320 X 320 mm Mould height min.: 225 mm Mould height max.: 575 mm Platen size (h x v): 446 X 446 mm Injection unit Screw diameter: 25 + 15 mm Iiolhjwkkuyjcdw Njb Injection volume: 39 + 20 cm³ Shot weight: 35 + 18 g Injection pressure: 2210 bar Measurements and weight Dimensions: 3,5 X 1,2 x 1,9 m Machine weight: 2250 kg

Year of construction: 2024, Condition: new, Länge/Breite/Höhe: 3200mm/1550mm/2750mm Weight: 3550 kg Bending force: 60 tons Bending length: 2050 mm Passage between stands: 1700 mm stroke: 265mm Installation height: 530 mm Projection: 410 mm table height: 900 mm table width: 104 mm Y Fast speed: 200 mm/sec. Y Working speed: 10 mm/sec. Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Europ. bottom tool M.460R.85 (one of them in pitch) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC controlled motor-driven crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guide along the entire line Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Stop finger 2 pieces Iolhofgz U Sjcdw Nsib With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 1250 Measurements depth 3800 Injection Unit Screw diameter 25 mm Stroke volume 39 ccm Injection pressure 1810 bar Clamping Unit Clamping force 25 kn Max open daylight 279 mm Distance between bars 270 mm Mould height min 198 mm Additional Equipment Arburg side-entry picker Temperature Control Unit: 1x HB-Therm Series 5 Temperature sensor (mold) Interface Coloring Device Ijlhcdwjwkarne Neib This Arburg Allrounder 270 S 250-60 was manufactured in 2004. It's a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 270 S 250-60 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding