Vacuum - reversible lifter

FEZER 10 t 3.21.5.0185

Year of construction: 2013, Condition: excellent (used), Load capacity: 10000 kg Number of suction cups: 8 pieces Diameter of the suction cups: 850x460 mm Iislhcehgfhyjdw Njb Suction force: 10000 kg/80 Total power requirement: 2,2 kW Machine weight approx.: 1900 kg Dimension machine approx. LxWxH: 3,5x1,9x1,9 m Load capacity per suction plate = 1500kg at 80"%. Suction plates were exchanged on 06.2016 Machine used in Germany until 10.2018

Condition: used, A.T.I.B Elettronica type 5STT80/100-GY Series 5 forklift charger for charging battery-powered forklifts and similar industrial trucks. output: 100 A Ielhcdswdup Uew Njib

Condition: used, Year of construction: 2013, 10 MVA cast resin transformer, 10500 V +- 2x2.5 % / 6000 V, Yy0, year 2013 Iolhcstwwm Usdw Neib

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Technical data of the installation: Number of racking rows: 01 pcs. Shelf length: approx. 10.100 mm Number of bays / row of shelves: 04 pcs á 2.400 mm Number of levels plus floor level: 03 pcs. Included in delivery: 05x pallet rack uprights, used Material color: green upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( welded truss ) 3.650 mm high 870 mm deep incl. load distribution plate, used total length: approx. 930 mm inside width: approx. 102 mm 24x pallet rack beams, second-hand material color: green INP profile: 80 x 42 mm clear width: 2.400 mm max. load per truss pair 2.400 kg with evenly distributed load 48x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 20x heavy duty dowels, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 Iolhcjmxlm Tjdw Neib 10x shims, used execution: complete galvanized for levelling of the racks which are placed are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm

Condition: good (used), uprights 3.500 x 1.000 mm/ crossbars 2.700 mm Technical data of the pallet racking system: Racking system: Eurostock Type: AS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 14.100 mm Number of bays / shelf row: 05 pcs. á 2.700 mm Number of levels plus floor level: 02 pcs. Included in delivery: 06x pallet rack uprights, used Material color: blue profile dim.: 100 x 78 x 2.5 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( welded truss ) 3.500 mm high 1.000 mm deep 20x pallet rack beams, used Iielhcdwom Exd Ne Nsb material color: yellow box profile: 120 x 50 mm agraffe: 3 HK (hooks) clear width: 2.700 mm max. load per truss pair 2.100 kg, with evenly distributed load 40x safety pins, used material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting out Remark: The pictorial materials serve only to illustration of the material. The quantities shown quantities may differ from the scope of delivery.

Condition: good (used), Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of racking rows: 01 pcs. Shelf length: approx. 15.100 mm Number of bays / rack row: 04 pcs. á 3.600 mm Number of levels plus floor level: 03 pcs. Technical data on volume: Pallet spaces per bay: 16 pcs. Pallet spaces per row: 64 pcs. Total pallet spaces: 64 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 dimensions: 1.200 x 800 x 150 mm total height incl. pallet: n.d. Weight per pallet ( max. ): 389 kg Included in delivery are: 05x pallet rack stand, used Iolhcdwomrn Das Njib material color: sendz. galvanized profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( screwed truss ) 4.700 mm high 1.100 mm deep 24x pallet rack truss, used material color: RAL 2004 orange box profile: 120 x 50 mm type of cross beam: PNB 0472 agraffe: 4 HK (hooks) clear width: 3.600 mm max. load per truss pair 1.558 kg with evenly distributed load 48x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 20x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 10x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm

Condition: good (used), Shelf uprights: 2,300 mm x 1,100 mm / Clear width: 3,600 mm Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 15.100 mm Number of bays / rack row: 04 pcs. á 3.600 mm Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 12 pcs. Pallet spaces per row: 48 pcs. Total pallet spaces: 48 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 dimensions: 1.200 x 800 x 150 mm total height incl. pallet: n.d. Weight per pallet ( max. ): 800 kg Included in delivery: 05x pallet rack stand, used material color frame: sendz. galvanized Material color framework: blue Profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 2.300 mm high 1.100 mm deep 16x pallet rack traverse, used material color: Ral 2004 orange box profile: 145 x 50 x 1.75 mm Iijlem E Ik Rehcdw Neb type of truss: PNB0445 agraffe: 4 HK (hooks) clear width: 3.600 mm max. load per truss pair 3.200 kg with evenly distributed load 32x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out 20x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 10x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm

Condition: good (used), Technical data for the pallet racking system: Racking system: Bito Type: PRO Technical data for installation: Number of rack rows: 01 pcs. Length per shelf row: 34,100 mm Number of bays per shelf row: 10 pcs. Number of levels plus base level: 02 pcs. The scope of delivery includes: 11x pallet rack uprights, used Material color: sendzimir galvanized Upright profile dimensions: 100 x 65 x 2 mm Upright type: P 3 Incl. cross and diagonal struts, foot plates The uprights are pre-assembled (bolted framework) 2,000 mm high 1,100 mm deep 40x pallet rack traverse, used Material color: blue Box profile: 150 x 50 mm Beam type: PT150M Bracket: 5 HK (hooks) clear width: 3,300 mm Max. load per pair of beams 3,650 kg, with evenly distributed load 80x locking pin, used Version: sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 44x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 22x shim plate, used Design: galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Iijlhcdjudvnnjw Neb General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Year of construction: 2002, machine/vehicle number: 10857, Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Working speed: 32 - 230 mm / sec Ijlhcdjvmfzbew Neib Return speed: 600 mm / sec Required power: 158 kW Weight of machine approx.: 44 ton Height over floor approx.: 6175 mm Automation

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 10857, installation height: 2,200 mm, pressing force: 315 t, table width: 2,500 mm, table length: 1,000 mm, ram stroke: 1,100 mm, TECHNICAL DETAILS Total pressing force: 315 t Ejector force: 2 x 125 kN Ejector as hold-down device: 2 x 250 kN Stroke: 1,100 mm Tool weight on ram max.: 6,000 kg Installation height: 2,200 mm Table clamping surface: approx. 2,500 x 1,000 mm Ram clamping surface: approx. 2,500 x 1,000 mm Iijlhcdwju Unlgs Neb Speeds Rapid traverse from: 600 mm/s Working speed: 32 - 230 mm/s Rapid traverse up: 600 mm/s MACHINE DETAILS Power requirement: 158 kW Machine weight: approx. 44 t Height above floor: approx. 6,175 mm

Condition: ready for operation (used), 2 tables of 5000 x 3000 mm each Ielev Taimjhcdw Noib Thickness: 500 mm Length: 10 000 mm (2x 5000 mm) Large: 3000 mm Weight: 34 ton (2x 17 ton) With (1) -- Without (2) nuts: 8 T-slots

Condition: good (used), Static Mixer, Disposable Mixer, Plastic Spiral Mixer -Manufacturer: tsi, Static mixer SULZER QUADRO MGQ 10-19D 15 pieces -Version with Luer-Lock attachment for dispensing needles -Industrial standard connection can also be used for other cartridge systems Ielhcdwou Aifte Njib -Thread: MGQ Series 7/8" - 9 UNC coarse thread -Quantity: 3 bags with 15 pieces each available -Distribution/Price: per bag, minimum order 2 bags -Bag dimensions: 190/130/H40 mm -Weight: 0.2 kg/bag

Condition: good (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: AS4002/10, This kiln is manufactured by the Italian company SITI and is suitable for firing sanitary ceramics. The guaranteed firing temperature is 1220-1230 degrees Celsius. It can also be used for corrective firing of sanitary ceramics. The kiln comes with 10 complete cars equipped with heat-resistant accessories. Additionally, it includes a manual shuttle for kiln cars and a hydraulic lifting table for loading pieces. Furthermore, there are 4 stainless steel exhaust chimneys included. The furnace was in operation for 3 years and was professionally dismantled in 2021. It is currently stored in Ludinovo, Kaluga Region, Russia. Iolhcdeu S E Umow Neib

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 102960 € 2048.9 € 800 mm 2000 mm 400 mm 260 mm 560 mm 560 mm 318 M 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6000 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 120-350 mm. Option: hard top jaws with gripping range 120-500 mm Iijlhcdwowirghe Nob 2 pcs. steady rests on supports Dm. 60 - 260 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 980 mm, 20 x lashing eyes per 6 t, 20 x lashing brackets per 6 t, 18 x lashing holes, 7 x stanchion pockets, centered, 14 x stanchion pockets in the outer frame, 2 pairs of container locks, surcharge for bulkhead approx. 1.600 mm high, pluggable Price: 1,500 ¤ , Surcharge for extendable drawbar Price: 1,500 ¤ , Surcharge for 4 x warning signs with lighting Price: 800 ¤ , , Also available in loading area lengths 8,600 mm, 9,000 mm or 10,500 mm! , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Islhcdewkq Eljw Njib

Condition: used, New: No Field of application: Freight transport Attachment suited for: Loading and unloading machines Please contact ATS Norway AS for more information Please provide reference number upon request: 19834 Description: HMF rear-mounted crane. The crane is manual. The owner is a little unsure about its condition. Ielhcdwjv U Sche Noib Ready for delivery.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 125740 € 2502.23 € 1020 mm 2000 mm 510 mm 358 mm 770 mm 560 mm 361 M 12 6,3 - 3 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 505 mm 270 mm 105 mm 6 MK 225 mm 18,5 kW 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Ijlhcdswiq Drow Nsib Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table and additional automation. Year of manufacture: 2011 Clamping unit: Iislhcdowigacsw Nob Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - touch screen Additional equipment: Production line with robot, rotary table and additional automation Vertical injection molding machine Air valves Injection for mold parting Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor controlled by an inverter - very precise Automatic part feeding with quality control system Machine workstation protection with safety package Dimensions: Weight: 350 kg Length/width/height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2022, Condition: excellent (used), White Type: T/800/70/10 Iielhjvxrwgscdw Nsb Water-cooled External dimensions (HxWxD): 2085 x 1415 x 2810mm Test room dimensions (HxWxD): 950 x 1100x 800 mm Volume: 800 liters Minimum temperature: -72 °C Maximum temperature: +180 °C Temperature change rate, cooling: 12.0 K/min Temperature change rate, heating: 12.0 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Temperature gradient: ≤2.0 K Heat compensation, at +20 °C: 8000 W Power connection 3/N/PE AC 400 V ±10% 50 Hz or 3/N/PE AC 440 V ±10% 60 Hz Rated power: 30 KW Rated current: 57 A Operating hours: approx. 10 (never used) Condition: used Weight 1600 kg Scope of delivery: (See picture) Sold ex location! (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2023, operating hours: 1 h, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Islhowf H Hzjcdw Nsib Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.

Condition: new, overall weight: 10,000 kg, empty load weight: 3,650 kg, maximum load weight: 6,350 kg, axle configuration: 2 axles, loading space volume: 37 m³, loading space length: 6,250 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Dautel DL 1500 tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 6 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ per month, , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ielhowhrq Rjcdw Nsib

Year of construction: 1997, Condition: ready for operation (used), For sale is an agitator motor from YTRON. It is the model Y 18.00 - 8,4 /T 10 - IV. The year of manufacture is 1997. RpM: 1375 V: 380 - 420 kW: 18 Connection: DN150 For further data see data sheet Iielhcdega Dznsw Nob

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 103160 € 2052.88 € 800 mm 2000 mm 400 mm 3 mm 560 mm 560 mm 318 M 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6100 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 250-380 mm. Option: hard top jaws with gripping range 250-500 mm 2 pcs. steady rests on supports Dm. 120 - 320 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Iislhcjwiq E Aedw Neb Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 1 h, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Iislswf H Aiohcdw Nob Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.

Condition: excellent (used), Year of construction: 2023, operating hours: 1 h, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Iolhcswf Hthsdw Nsib Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.