Horizontal Machining Centre

HYUNDAI KIA HS500i

Condition: ready for operation (used), Year of construction: 1999, General Data Measurements width 1880 mm Measurements depth 2540 mm Measurements height 2515 mm Machine weight 10000 kg Control Unit Brand FANUC Model Series 0-T Main Drive Number of axis 2 Workpiece Workpiece weight 1000 kg Tools Number of station 16 Iielhewk Rr Ejcdw Njb This Hyundai HiT V5R was manufactured in 1999. It features a swing of 800 mm, a maximum length capacity of 625 mm, and a chuck size of 381 mm. Equipped with a 16-station ATC, an 8-position turret, and a main motor of 30 HP, it supports up to 1,000 kg. Additional features include a Fanuc Series O-T CNC control and a turbo chip conveyor. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2009, In good technical condition. Year of construction 2009 - CNC control: FANUC Series 21i-MB - Work table dimensions (L x W): 1200 x 500 mm - Displacement in the X/Y/Z-axis: 1060/510/635 mm - Rapid feed in the X/Y/Z axis: 36/36/30 mm/min - Servo motor in the X/Y axis: FANUC a12/3000i 3kW - Z-axis servo motor: FANUC a22B/3000i 4 kW - Total weight of the VX-500 machine: 7000 kg Iijlhcsuqxwaodw Nob Accessories: Chip conveyor, mist extractor, 4 axes, handwheel.

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock Ioleu A Td Tshcdw Nsib • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, controller model: FANUC OM, spindle speed (max.): 12,000 rpm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS X travel: 500 mm Y travel: 350 mm Z travel: 350 mm Spindle Iijlhcdsv Uqz Ajw Njb Spindle speed: max. 12,000 rpm Tool holder: BT30 Tool positions: 20 MACHINE DETAILS Dimensions: 1,800 x 3,000 x 2,500 mm Machine weight: 5 t EQUIPMENT - 2 pallets - Coolant supply

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 875 mm, travel distance Z-axis: 875 mm, controller manufacturer: Fanuc, controller model: 18i-M, number of slots in tool magazine: 60, TECHNICAL DETAILS Iiolovtpu Sohcdw Neb X-axis travel: 1,050 mm Y-axis travel: 875 mm Z-axis travel: 875 mm Control: FANUC 18i-M NC rotary table: 630 x 630 mm Number of tables: 2 Number of places in the tool changer: 60 MACHINE DETAILS Dimensions (L x W x H): 3,525 x 5,650 x 3,526 mm Machine weight: 25,000 kg EQUIPMENT - IKZ (30 bar) - Chip conveyor - RENISHAW tool measuring probe

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,619 h, General Data Machine weight 10000 Control Unit Brand FANUC Model 21i MB Main Drive Spindle speed range 80 - 12000 Spindle motor power 11/7.5 kW Tool taper NT 40 Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 42 m/min Y-Axis Movement 600 mm Y-Axis Rapid Traverse 42 m/min Z-Axis Movement 600 mm Z-Axis Rapid Traverse 42 m/min Table Outer length 2 x 900 mm Outer width 2 x 650 mm Min distance between vertical spindle and table 200 mm Max distance between vertical spindle and table 800 mm Table load 2 x 400 kg Tools Islhowhr Hfjcdw Neib Max weight 8 kg Max tool diameter 90 mm Max tool length 300 mm This 3-axis Hyundai Kia Hi-V600D vertical machining center was manufactured in 2011. Ideal for precision machining tasks, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the Hyundai Kia Hi-V600D machine we have for sale. Contact us for more information. Application Types Milling

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. Iiolhcdwslrqiqs Njb • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Year of construction: 2008, Condition: ready for operation (used), General Data Measurements depth 3150mm Measurements width 1850mm Measurements height 2000mm Machine weight 4500kg Control Unit Brand FANUC Model 21i TB Main Drive Spindle speed range 4000 rpm Spindle motor power 15 kW Number of axis 2 Movement X-Axis Movement 210 Z-Axis Movement 750 C-Axis Movement 360° Media Chip conveyor Yes Additional Equipment Tool Measuring Arm 3-Jaw Chuck Ø 215 mm Main Spindle /3-Jaw Chuck Ø 165 mm/ Sub-Spindle 2 /Workpiece Part Catcher /Full Documentation This 2-axis Hyundai Kia SKT21LMS horizontal turning machine was manufactured in 2008. Ideal for precision turning operations, it offers robust construction and reliability. Consider the opportunity to buy this Hyundai Kia SKT21LMS horizontal turning machine. Contact us for more information. Application Types Ioljwanmfjhcdw Nsib Turning

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand FANUC Model 21i-MB Main Drive Spindle speed range 10000 Spindle motor power 11/15 kw Tool taper ISO 40 Number of axis 4 Ielhcdwswanncs Njib Movement X-Axis Movement 1060 mm Y-Axis Movement 510 mm Z-Axis Movement 635 mm Table Outer length 1200 mm Outer width 800 mm Min distance between vertical spindle and table 150 mm Max distance between vertical spindle and table 785 mm Table load 800 kg Media Chip conveyor Yes Additional Equipment 4th axis TANSHING positioning function M Spindle center coolant: 20 bar pressure Spindle center coolant: 20 bar pressure Spindle center coolant: 20 bar pressure Spindle center coolant: 20 bar pressure This 4-axis Hyundai Kia VX500 vertical machining center was manufactured in 2007. If you are looking to get high-quality milling capabilities, consider the Hyundai Kia VX500 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2016, Condition: ready for operation (used), General Data Measurements width 1650 mm Measurements depth 2900 mm Measurements height 1870 mm Machine weight 4300 kg Control Unit Brand FANUC Model i Series Main Drive Spindle speed range 4000 RPM Spindle motor power 15 kW Spindle bore 78 mm Number of axis 2 Movement X-Axis Movement 210 mm X-Axis Rapid Traverse 36 m/min Z-Axis Movement 550 mm Z-Axis Rapid Traverse 36 m/min Workpiece Workpiece drm over bed 550 mm Turret Number of turrets 1 Tools Number of station 12 This HYUNDAI KIA L 210LA was manufactured in 2016. A reliable horizontal turning machine, it offers robust performance for precision machining. Ideal for workshops looking to enhance their turning capabilities. Contact us for more information. Application Types Iislhcdev Nryisw Njb Turning

Year of construction: 2005, Condition: ready for operation (used), General Data Machine weight 8100 kg Control Unit Brand FANUC Model Series 21i-TB Main Drive Spindle speed range 3500 rpm Spindle motor power 18.5/22 kW Spindle bore 75 mm Turret Number of tool slots 12 Rotating tools Yes Tools Type of tool holder VDI40 Media Chip conveyor Yes Additional Equipment External Cooling: Yes Chip Conveyor: Yes Toolsetter: Yes Tool Holders: Yes Bar Feeder Interface: Yes Rotating Tools Speed: 4000 rpm Rotating Tools Power: 5.5 kW Swing Over Bed: 650 mm Swing Over Carriage: 300 mm Ielhevfyxrscdw Nsib Maximum Workpiece Length: 1000 mm This Hyundai Kia SKT 28 LM was manufactured in 2005. A robust horizontal turning machine featuring a Fanuc Series 21i-TB control system, it offers a spindle speed of 3500 rpm and a chuck diameter of 250 mm. Equipped with a chip conveyor, toolsetter, and bar feeder interface, it's ideal for efficient turning operations. If you are looking to get high-quality turning capabilities, consider the Hyundai Kia SKT 28 LM machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), power: 14 kW (19.03 HP), Year of construction: 2020, operating hours: 1,251 h, Vehicle Description HYUNDAI 18-9 Mini Excavator Iijlhcdwswk Nkgo Nsb Year of Manufacture: 2020 1,251 hours according to the counter 1,860 kg 13.6 kW - Quick coupler - Hydraulic slope bucket - All lines - 2 backhoe buckets - Hydraulic adjustable chassis - Beautiful excavator - Ready for immediate use Sales price: €14,900 net Favourable delivery also available!

Year of construction: 2023, Condition: ready for operation (used), Additional Equipment Automatic measuring arm Chip conveyor (hinge belt type) Iielhewkalzjcdw Nsb Coolant high pressure, approx. 20 bar KLM pistol (for coolant or air cleaning) HW - Fanuc Polygon Turning (Polygonal machining) Flushing ejector on the sub-spindle Pneumatic ejector on the sub-spindle 3-color signal lamp KLM filter for internal coolant pump Iemca Master 865 (bar feeder) This 4-axis Hyundai HD2200SY horizontal turning machine was manufactured in 2023. It features a turret with 24 positions, a high-pressure coolant system at approximately 20 bar, and an Iemca Master 865 bar feeder. Additional highlights include a chip conveyor, part catcher on the sub-spindle, and a pneumatic ejector. Ideal for complex machining tasks, the Hyundai HD2200SY machine we have for sale is a robust addition to any production line. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2008, operating hours: 14,220 h, Field of application: Construction Serial number: N8071xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19258 Specifications: Iislhcdevg A Ewsw Neb Model year: 2008 Hours : approximately 14,220 Weight : approximately 29,300 kg Power: 147 kW Chassis: See pictures for condition Belt width: approx. 60 cm Machine width: approx. 310 cm S70 quick release Engcon tiltrotator Hammer hydraulics Tiltrotor with provision for additional equipment Excavator bucket and sanding bucket included Central grease Lightbar Additional work light Radio/ CD Air conditioning ( AC) Description: Hyundai Robex 290 crawler excavator from 2008. The excavator works as it should and comes with tilt and two buckets. It has hammer hydraulics. Can be delivered within a...

Condition: used, Functionality: fully functional, Year of construction: 2016, operating hours: 15,429 h, load capacity: 1,600 kg, lifting height: 5,000 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,220 mm, fork carriage width: 950 mm, fork length: 1,000 mm, total length: 2,100 mm, engine type: ---, drive type: Elektro, construction width: 1,080 mm, net weight: 3,317 kg, Electric 4-Wheel Forklift Load Center: 500 ISO Class: ISO Class 2 Mast Type: Triplex Transmission: Three-Phase AC Technical Condition: Good Front Tires Type: Super Elastic Front Tire Size: 2 x 18x7-8 Front Tire Condition: 40-60% Rear Tire Type: Super Elastic Rear Tire Size: 2 x 16x6-8 Rear Tire Condition: 0-20% Battery Voltage: 48V Battery Ah: 552Ah Ijlswk S Etehcdw Njib Battery Year of Manufacture: 2016 Single auxiliary hydraulics, integrated sideshift, battery from 2020, charger, 1 rear work light, load backrest

Condition: refurbished (used), Functionality: fully functional, Forklift battery with a 1-year warranty 80V 5PZS 775AH REMA 320A connector installed - alternative connectors can be converted upon request Including Aquamatik for automatically filling the cells with distilled water Test date 2024 Dimensions: L 2,020 x 430 x 900 mm Weight: approx. 2,028 kg Capacity: min. 90-100% (C5 report included with delivery) Suitable for the following vehicles: Still MX-X Jungheinrich EFG 430 Jungheinrich EKX 515 Toyota FBMF30 Baumann EMS 65-70 Caterpillar EP25N Caterpillar EP30KPAC Ioljwiiz Aehcdw Nsib Caterpillar EP35KPAC Caterpillar FB30 PAK Caterpillar FB35K PAC Cesab 5 Daewoo B22/35 X-5 Daewoo B30 X Daewoo B30 X-5 Daewoo B30 X-7 Daewoo B30 X-RW Daewoo B30/32 Daewoo B35 X-7 Doosan B30X5 Doosan B35X-5 Hubtex MQ 40 Hubtex MQ 45 Hubtex MQ 50 Hubtex MQ 60 Hyundai 30BH-9 Hyundai 30BHA-7 Hyundai 50B-9 Kalmar ECD 40-5 Kalmar EFY 50 Kalmar EFY 60 Mitsubishi FB25N Mitsubishi FB30 Mitsubishi FB30AN Mitsubishi FB30K PAC Mitsubishi FB35AN Nissan QX30 and more... All common battery sizes available.

Condition: used, Year of construction: 2016, operating hours: 4,589 h, 2016 | Hyundai | Hyundai HX330L with long-front boom, standard boom & shear | Used Demolition Excavator | 4589 hours Iiolhcswiaugjdw Nsb 📍Location: France, Corcelles-en-Beaujolais 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 180000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 68 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine was in good working order at time of inspection it has Small boom 4.30 stick3.20 large boom size in the inspection is all so fitted with air compressor which blows air in front of the main window screen to clear dust is fitted with rock guards on roof and front screen. New hydraulic pump changed 100 hours ago. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "35653 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Year of construction: 2017, Condition: ready for operation (used), A compact and high-precision Hyundai CNC turning and milling machine is available. Travel X/Z: 220mm/560mm, rapid traverse X/Z: 36m/min, max. turning diameter: 310mm, max. turning length: 521mm, spindle clearance: 65mm, speed: 4000rpm, spindle power: 15kW/11kW, tool positions: 12, coolant capacity: 200l. Machine dimensions X/Y/Z: approx. 4250mm/1700mm/2450mm, weight: approx. 4600kg, control: Fanuc F0i-A with Manual Guide, operating hours: approx. 3200h. Including chip conveyor CC-D230, extraction system LNS WS 2-500E with oil mist separator and transformer. Documentation available. On-site inspection is possible. Iiolewkuzkjhcdw Nsb

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 23500 Main Drive Spindle speed range 8000 Spindle motor power 22 kw Number of axis 3 Movement X-Axis Movement 2450 mm Y-Axis Movement 950 mm Z-Axis Movement 850 mm Table Outer length 2700 mm Ieljwiz Rpohcdw Neib Outer width 950 mm Table load 4500 Tools Slots in storage 30 This 3-axis Hyundai Wia F 960M vertical machining center was manufactured in 2014. It features a large table size of 2700 x 950mm, capable of handling loads up to 4500kg. Equipped with a 22 kW spindle power and a maximum speed of 8000 RPM, it includes a 30-position tool magazine. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia F 960M machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2021, operating hours: 970 h, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 19487 Specifications: Certified Model year: 2021 Hours: approx. 970 Weight: 8,750 kg Undercarriage: Rubber tracks Buckets: Cleaning buckets and digging bucket Pinch included Tiltrotor: Engcon Central grease Quick release Grader blade Rotor lamp Additional work light Rear view camera Air conditioning (AC) Radio/CD Description: Hyundai Robex 80 CR-9A crawler excavator from 2021 for sale. The machine has only run approx. 970 hours The excavator is very well equipped and comes with: Engcon tiltrotator Pinch Ieljvyd U Hjhcdw Nsib Two buckets (polishing bucket and digging bucket) Prepared for immediate delivery. Hours: 970 Total Weight: 8750

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 14,733 h, load capacity: 1,600 kg, lifting height: 4,700 mm, free lift: 1,350 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, fork carriage width: 1,000 mm, fork length: 1,000 mm, total length: 2,100 mm, engine type: ---, drive type: Elektro, construction width: 1,080 mm, net weight: 4,277 kg, Electric 4-Wheel Forklift Load Center: 500 ISO Class: ISO Class 2 Iolhcdwjwk S Eme Noib Mast Type: Triplex Technical Condition: Good Front Tires Type: Superelastic Front Tire Size: 2 x 18x7-9 Front Tire Condition: 40-60% Rear Tire Type: Superelastic Rear Tire Size: 2 x 16x6-8 Rear Tire Condition: 40-60% Battery Voltage: 48V Battery Ah: 552Ah Battery Year of Manufacture: 2017 Single auxiliary hydraulics, sideshift, battery from 2020, 1 rear work light

Condition: used, mileage: 18,500 km, power: 160 kW (217.54 HP), fuel type: electric, gearing type: automatic, first registration: 12/2023, next inspection (TÜV): 12/2026, color: grey, number of seats: 5, Equipment: ABS, air conditioning, central locking, immobilizer system, navigation system, second-hand vehicle warranty, Optional extras: Iielhcdswkn Udsw Neb Mica paint / mineral-effect paint Additional features: 6 speakers, storage pocket on the front seat backrests, passenger-side airbag, deactivatable passenger-side airbag, driver-side airbag, ambient lighting, power-folding exterior mirrors, power-adjustable exterior mirrors. Adjustable and heated, both, exterior mirrors painted, battery heating system, LED indicators integrated into exterior mirrors, roof rails, roof spoiler in body color, chrome-plated trim strips, Digital Cockpit (digital instrument display), efficiency package, automatic switch-on for headlights / light sensor, electric brake force distribution, electric motor 160 kW (cont. 53 kW), driver assistance system: active lane keeping assistant (LKAS, Lane Keep Assist System), driver assistance system: attention assistant (In Cabin Camera, ICC), driver assistance system: Highway Driving Assist 1.5 (HDA 1.5), driver assistance system: autonomous emergency braking function including forward collision warning (FCA), driver assistance system: hill start assist, driver assistance system: front and rear parking sensors, driver assistance system: driving profile selection (Drive Mode), driver assistance system: high beam assistant, driver assistance system: occupant alarm (RSA), driver assistance system: multi-collision brake, driver assistance system: safety system with automatic emergency call (ERA GLONASS / eCall), driver assistance system: lane following assist (LFA), driver assistance system: traffic sign recognition, extended (cruise control/limiter system), electric rear windows, electric front and rear windows with automatic up/down, chrome-plated window trim strips, Bluetooth hands-free system, heat-insulating windshield, front storage compartment / frunk (trunk, front), LED luggage/cargo area light, luggage compartment cover / roller blind, transmission for electric vehicle, rear cup holder, front cup holder, belt tensioner, LED rear lights, heated rear window, HV battery 65.4 kWh (lithium-ion), induction charging cradle for smartphone, interior mirror with automatic dimming, Isofix mounts for child seat, body: 5-door, automatic climate control 2-zone, head airbag system, adjustable rear headrests, heated tailgate, on-board charger (3-phase), LED light strip at the rear, LED light strip at the front, lumbar support on the front left seat, electric. adjustable, 3-spoke leather steering wheel, heated steering wheel, multifunction steering wheel, steering wheel with shift paddles, height-adjustable steering column, length-adjustable steering column, front and rear LED reading lights, headlight range control, Lifetime MapCare (internet-based services), alloy wheels, rear air vents, rear center armrest, navigation-based adaptive cruise control (cruise control) with distance control (NSCC), navigation system, rear fog light, emergency charging cable (ICCB), electric parking brake (EPB), LED projector headlights, digital radio reception (DAB+), painted wheel arch covers front and rear, standard wheelbase, tire repair kit, tire pressure monitoring system, rear view camera, split/folding rear seat backrest, gear/selector lever (shift by wire), window fogging detection/control, front side airbag, front center side airbag (central airbag), Service system: Online Update OTA (Over The Air), Service system: Plug & Charge, Service system: Remote Services (Blue Link), Height-adjustable front seat belts, Height-adjustable front left seat, Height-adjustable front right se

Condition: excellent (used), mileage: 166,985 km, fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, first registration: 08/2004, color: green, suspension: steel, Year of construction: 2004, DOUBLE TIRES VERY CLEAN = More information = General information Number of doors: 4 Cab: double Technical information Number of cylinders: 4 Iolhjuulqhecdw Nsib Axle configuration Suspension: leaf spring Front axle: steered Rear axle: double tires Dimensions Dimensions (L x W x H): 5000 x 1780 x 2200 cm Weights Empty weight: 1,715 kg Payload: 1,485 kg GVW: 3,200 kg Condition Technical condition: very good Visual condition: very good More information Contact Thierry Leemans for more information.

Condition: used, Functionality: fully functional, Year of construction: 2011, operating hours: 5,919 h, load capacity: 3,000 kg, lifting height: 4,500 mm, free lift: 1,464 mm, mast type: triplex, construction height: 2,190 mm, drive type: Treibgas, LPG forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Iolhjwkb Udjcdw Nsib Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Sideshift,

Condition: used, Year of construction: 2017, operating hours: 5,417 h, Field of application: Construction Serial number: XLRASF5100G46xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19733 Specifications: - 2017 model - Hours: approx. 5417 - 171 kW - 30,500 kg - Chassis (see pictures) - Belt width: approx. 60 cm - Width of the machine: approx. 320 cm - Leica GPS - SMP Excavator Bucket - SMP Sanding Bucket - R8 Rototilt - Central grease - S70 Quick Release - Swing gear has been overhauled - Rear view camera - Extra light - Dent on right side, shown in pictures - Radio/CD Iielhcov U R S Ijdw Njb - Air conditioning/ac Description: Hyundai HX300L crawler excavator from 2017. The excavator is certified and ready to be put into operation. It comes with a sanding bucket, digging bucket, rototilt and Leica GPS. Can be delivered within a short time. Watch video. Hours: 5417 Total Weight: 30500 Width: 320 Kw: 171