Injection moulding machine

KraussMaffei KM 650-3500-700 CZ

Condition: excellent (used), Year of construction: 2004, Krauss Maffei KM 650 - 3500 C2 injection molding machine Year of production - 2004 Number of operating hours - 70,000 Wittmann W643 robot - 339 Year of production -2004 X-axis servo 1200 mm Y-axis servo 2400 mm Z-axis servo 6000 mm C-axis servo +/- 90° A-axis servo +/- 180° vacuum 4 circuits grippers 4 circuits Fully hydraulic closing system. MC 4 control system with color monitor, integrated control panel and built-in disk station. Plasticizing system complete plasticizing system for thermoplastics with screw diameter 100 mm, with non-return lock and open nozzle. Closing unit: - Mold closing force: kN 6500 - Mold opening force: kN 346 - Mould mounting plate movement force - opening kN 169 - closing kN 144 - Mounting plate dimensions (h x v): mm 1490 x 1440 - Clearance between columns (h x v): mm 1000 x 930 - Mold opening stroke: mm 1150 - Minimum mold height: mm 600 Injection unit: - Screw diameter: mm 100 - Injection pressure: bar 1742 - Injection volume: cm3 2411 - Injection weight for PS: g 2170 - Injection efficiency cm3/s 649 Electric-hydraulic equipment: - Nominal power of the pump motor: kW 90 - Power of installed heaters: kW 44 - Number of cylinder heating zones: 7 - Oil tank capacity: l 1240 Dimensions and weight: - Net weight with control cabinet: t 39.5 Technical condition: All hydraulic lines replaced 12/24; last Krauss Maffei inspection 03/24; New screw drive (hydraulic) 01/25; Gbolhcdwjwhm Ukswsl new backflow block 01/25; Additionally not included in the price: new injection cylinder with screw and

Condition: reconditioned (used), Year of construction: 2004, Krauss-Maffei KM 650-3500 C 1 650 tons Krauss-Maffei injection moulding machine from 2004 with 45.000 working hours in automatic-cycle. Machine will be delivered full checked tested and reconditioned by our team. Equipment: 6 neum. cscade, 24 hot runner zones, 1 core in fix platen, 1 core in moving platen, electrical screw-drive. Ask us for the start up service with warranty of working condition. Gjlhcjhy Nnbsdwwobl Technical details CLAMPING FORCE 6.500 kN PLATEN SIZE 1.540 x 1.440 mm DISTANCE BETWEEN TIE BARS (h x v) 1.110 x 960 mm TRAVEL OPENING 1.150 mm DAYLIGHT MAX 1.750 mm SCREW DIAMETER 90 mm MIN. MOULD HIGHT 600 mm YEAR OF BUILDING 2004 INJECTION VOLUMEN 1.953 cm3 SHOTWEIGHT 1.777 grms INJECTION PRESSURE 1.742 bar This machine will be delivered complete checked, repaired and tested at our workshop and can be shown under power !

Condition: used, Year of construction: 2005, Technical details: Gslotunccshcdwwsbl screw size: 90 mm injection shot weight in Polysterol: 1.758 g/PS closing pressure: 6500 kN weight of the machine ca.: 32 t Out of serial production *

Condition: ready for operation (used), Year of construction: 2003, Stock-No. 13439 Manufacturer Krauss Maffei Type of machine KM 150 – 700 - 160 CZ Year 2003 Gbelsub S T Iohcdwwel Working hours h Controlversion MC 4 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 1500 kN Mould opening force, max. 86 kN Travel force movable platen opening 45 kN Travel force movable platen closing 34 kN Size of mould platens (h x v) 780 x 790 mm Distance between tie bars (h x v) 500 x 500 mm Mould opening stroke 600 mm Mould height min 400 mm Max. daylight 1000 mm Hydraulic ejector - stroke 150 mm Ejector force 22/10 kN Injection unit: Screw diameter 50 / 25 mm Ls/D ratio 20 / 26 Injection pressure 1892 / 2500 bar Stroke volume 377 / 52 ccm Shot weight (PS) 343 / 47 gr. Injection rate 181 / 63 ccm/s Screw speed 255 / 367 1/min Plasticising rate max. 24 / 9 g/s Nozzle pressure 84 / 67 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 30 kW Installed heating capacity 22 kW Adjustable barrel heating zones 5 Oil Reservoir capacity 345 ltr. Dimensions and weights: Dimensions of the machine ca. 5,00 x 2,00 x 2,20 m Total machine weight 8200 kg Max. mould weight 1650 kg Accessories: - Anti vibration pads - 2 x 6-zone water battery - rotary table D: 610 mm Additional Options: - injection molding machine equiped with 2 x core pulls on movable plate - 1 x Air valve - Robot interface according to Euromap 12 - 16 x hot runner controller - Accumulator

Condition: good (used), Year of construction: 1997, Krauss Maffei KM 650 - 3500 C2 injection molding machine Year of production - 1997 Fully hydraulic closing system. MC 3 control system SP 3500 plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 90 mm, with a non-return lock and an open nozzle. Closing system: complete plasticizing system for thermoplastics with a screw diameter of 90 mm, with a non-return lock and an open nozzle. TECHNICAL DATA: Closing unit: - Mold closing force: kN 6500 - Mold opening force: kN 346 - Mould mounting plate movement force -- opening kN 169 -- closing kN 144 - Mounting plate dimensions (h x v): mm 1490 x 1440 Golhcsvlpcgsdwwsbl - Clearance between columns (h x v): mm 1000 x 930 - Mold opening stroke: mm 1150 - Minimum mold height: mm 600 - Opening width: mm 1750 - Ejector stroke: mm 250 - Ejector force: kN 226/285 Injection unit: - Screw diameter: mm 90 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection weight for PS: g 1777 - Injection capacity cm3/s 649 - Increased injection capacity - Electric-hydraulic equipment: - Nominal power of the pump motor: kW 90 - Power of installed heaters: kW 44 - Number of cylinder heating zones: 7 - Oil tank capacity: l 1240 Dimensions and weight: - Net weight with control cabinet: t 39.5 - Machine dimensions (length x width x height): m 9.36 x 2.65 x 2.44

Condition: excellent (used), Year of construction: 1998, Krauss Maffei KM 110-700 C2 Year of manufacture: 1998 Injection unit: Screw diameter: 45 mm Injection weight: 278 g injection pressure: 2336 bar Metering volume: 305 ccm Clamping unit: clamping force: 110 t tie bar distance: 470x470 mm size of clamping platens: 745x770 mm Gslhcdwewigp Djwjbl ejector: hydraulic clamping unit: hydraulic Control system: MC IV Additional equipment: Machine in very good technical condition Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit hardened - bimetal Parallel movements Proportional valve on the injection unit - precise injection Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) The machine has been regularly serviced by the authorized service Krauss Maffei in Switzerland Dimensions: Weight: 6200 kg Length/width/height: 4.66x1.51x2.19 m Propulsion: Pumps/motor: 18.5 kW Heating power: 16 kW Total power: 34,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2006, operating hours: 77,000 h, Functionality: fully functional, clamping force: 5,000 kN, screw diameter: 100 mm, Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 137 kN Travel force movable platen closing 136 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95/48 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1411 bar Stroke volume 2411 ccm Shot weight (PS) 2194 gr. Injection rate 801 ccm/s Screw speed 189 1/min Plasticising rate max. 161 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,50 x 2,50 m Total machine weight 27090 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads - 2 x 8 fold water flow regulator Gjlowgni Hohcdwwobl Additional Options: - 2 x hydr. core pull on movable plate - 2 x hydr. core pull on fix plate - Robot interface according to Euromap 12 - 16 x hotrunner controller - 1 x air valve on movable plate

Condition: reconditioned (used), Year of construction: 2002, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 5000 - distance between columns (h x v): mm 900 x 800 - distance of mold opening max: mm 1170 - mold installation height min: mm 480 - opening stroke of the clamping platen: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95 ( Backward: 48 ) SCREW UNIT - Screw diameter: mm 90 - Ratio Ls/D: 20 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection size for PS: g 1777 - Injection capacity: cm3/s 649 - Closing force of the nozzle: kN 115 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 44 WEIGHT AND DIMENSIONS - net weight: t 25,8 - dimensions of the machine (L x W x H): m 7,65 x 2,33 x 2,55 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) Gbslhcsnh Rnujdwwel You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Condition: good (used), 1x used Krauss Maffei KM 125-700 C2 Ma-No. 61005758 Gelhcowcbdpedwwjbl Year of manufacture: 2004 Screw: 45mm Core pulls: 3x Hot runner: 8x Operating hours: approx. 73,000

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 450 - 3500 C3 Sprinter injection machine Year of manufacture - 2008 Fully hydraulic two-platen clamping system. MC 4 control system with color monitor, integrated control panel, and built-in disk station Plasticizing system Complete HPS-UN plasticizing system for thermoplastics with a screw diameter of 90 mm. TECHNICAL DATA Closing unit - Closing force of mold: kN 4500 - Opening force of mold: kN 280 - Moving force of the moving plate fixing the mold - -. -- opening: kN 137 -- closing: kN 116 - Dimensions of clamping plate (h x v): mm 1270 x 1200 - Clearance between columns (h x v): mm 900 x 800 - Opening path of the mold: mm 1170 - Installation height of the mold: mm 480 - Opening width: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95/48 Injection unit - Auger diameter: mm 90 Auger drive by electric motor with increasing drive force. For independent and energy-saving plasticization for opening and closing - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection weight for PS: g 1777 - Screw speed, standard, optional: rpm 149/247 - Injection capacity cm3/s 3817 - Injection capacity at: -- standard screw speed: g/s 103 -- increased screw speed: g/s 152 Electric-hydraulic equipment - Rated power of pump motor: kW 90 - Drive power of auger (electr.) kW 88 - Installed power of heaters: kW 59 - Number of cylinder heating zones: - 9 - Dry cycle time according to Euromap: 1/h 1400 - Oil tank capacity: l 1075 Weight and dimensions - Net weight with control cabinet: t 26.3 - Dimensions of foundation space (L x W x H): m 7.98 x 2.35 x 2.51 Gbolhcdwjq Nlzhewjl

Condition: used, Year of construction: 2005, operating hours: 85,795 h, machine/vehicle number: 61006657, screw diameter: 45 mm, total length: 4,870 mm, total width: 1,560 mm, total height: 2,550 mm, overall weight: 7,300 kg, Equipment: documentation/manual, Technical Specifications : Type : 140-700 C3 Year of construction : 2005 Clamping force : 1400 kN Mould opening force : 86 kN Travel force movable platen opening : 45 kN Travel force movable platen closing : 34 kN Size of mould platens (h x v) : 780 x 790 mm Distance between tie bars (h x v) : 500 x 500 mm Mould opening stroke : 600 mm Mould height min.: 300 mm Golhjv E Nupscdwwjbl Max. daylight : 900 mm Hydraulic ejector - stroke : 150 mm Screw diameter : 45 mm Injection pressure : 2336 bar Stroke volume : 305 cm³ Pump drive power : 58 kW Heating power : 22 kW Oil filling (l) 345 Dimensions: 4.87 x 1.56 x 2.55 m Total machine weight : 7300 kg Max. mould weight : 1650 kg

Condition: good (used), Year of construction: 2004, operating hours: 76,000 h, Functionality: fully functional, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 800 mm, displacement volume: 1,047 cm³, injection pressure: 1.778 bar, Equipment: documentation/manual, injection moulding machine KRAUSS MAFFEI KM 420-1900/55 CZ warehouse no.: 503534 manufacturer: KRAUSS MAFFEI type: KM 420-1900 55 CZ controller: MC 4 year of construction: 2004 operation hours: 76000 h technical data clamping unit clamping force: 4200 kN distance between tie-bars h x v: 800 x 800 mm size of mould plates h x v: 1270 x 1200 mm min. mould height: 380 mm max. open daylight: 1400 mm opening stroke: 1020 mm ejector stroke: 250 mm ejector force: 95 kN centering diameter of moving platen: 200 mm centering diameter of fixed platen: 200 mm Gjlhcdovirx Ejwwsbl weight of mould: 6700 kg technical data injection unit screw diameter: 70 mm swept volume: 1047 ccm injection pressure: 1778 bar screw length: 20 l/d screw speed: 527 min plasticising rate: 95 g/s PS injection rate into the open: 953 g/s PS number of heating zones: 6 technical data 2. injection unit 55 with ø 22 Injection pressure: 1674 bar Volume: 30cm³ Distance between sprayer 1 and 2: 300 mm (piggyback ) measures & weight measures of machine l x w x h: 9.83m x 2.33m x 2.48m total weight: 23090KG equipment included screen text german core pulling hydraulically 6x Machine without Handling machine without material hopper Anti vibration mounts mould heating 16x Injection moulding machine for two components

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, clamping force: 6,500 kN, screw diameter: 90 mm, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1300 mm Mould height min 650 mm Max. daylight 1950 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 90 / 35 mm Ls/D ratio 18 / 23 Injection pressure 1445 / 2429 bar Stroke volume 1813 / 156 ccm Shot weight (PS) 1650 / 142 gr. Injection rate 649 / 123 ccm/s Screw speed 218 / 291 1/min Plasticising rate max. 137 / 22 g/s Nozzle pressure 173 / 84 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 36 / 18,5 kW Adjustable barrel heating zones 7 / 5 Dimensions and weights: Dimensions of the machine ca. 8,70 x 5,10 x 2,60 m Total machine weight 35000 kg Gbslhcdwsv Stcwewjl Accessories: - Anti vibration pads Additional options: - 1 x air valve - 48 x hotrunner controller - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, clamping force: 6,500 kN, screw diameter: 130 mm, displacement volume: 6,172 cm³, injection pressure: 1.296 bar, plate width: 1,700 mm, plate height: 1,704 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Tool opening force, max.: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate (h x v): 1,704 x 1,700 mm Clear width (h x v): 930 x 930 mm Tool opening stroke: 1,150 mm Tool installation height, min.: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force forward/backward: 226 kN Injection unit Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Gbolhovn Ny Dscdwwel Displacement: 6,172 cc Shot weight (PS): 5,617 g Injection flow: 1,540 cc/s Screw speed: 138 rpm Plasticizing flow: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment Nominal pump motor power: 132 kW Installed heating power: 70 kW Cylinder heating control zones: 7 MACHINE DETAILS Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg EQUIPMENT - Oscillating elements - 1 x air valve - 2 x hydraulic core pull on BFAP - 2 x hydraulic core pull on FFAP - 8 x hot runner control points - Robot interface according to Euromap 67

Year of construction: 2006, Condition: good (used), Krauss Maffei Injection Moulding Machine Type: KM 650 5000 CM\2 with robot Control: MC4 Year: 2006 Clamping unit Clamping force t: 650 Opening stroke mm: 1750 Distance between tie bars mm: Gjlhcdwelpaftewebl 1000x929 Installation height min/max mm: 650/1150 Mould fixing platen size h x v: 1490x1440 Injection unit Screw size mm: 100 Injection shot weight in Polysterol gr: 3200 Injection volume cm³: 3334 Additional information 6 F. Kaskade Kernzüge 2

Condition: used, Year of construction: 2005, operating hours: 76,170 h, machine/vehicle number: 61006498, screw diameter: 50 mm, injection pressure: 1.892 bar, total length: 4,660 mm, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,200 kg, Equipment: documentation/manual, Technical Specifications : Type : 125-700 C2 Year of construction : 2005 Clamping force : 1250 kN Mould opening force : 70 kN Travel force movable platen opening : 35 kN Travel force movable platen closing : 28 kN Size of mould platens (h x v) : 745 x 770 mm Gelhcdwsvf Igkowsbl Distance between tie bars (h x v) : 470 x 470 mm Mould opening stroke : 600 mm Mould height min.: 300 mm Max. daylight : 900 mm Hydraulic ejector - stroke : 150 mm Screw diameter : 50 mm Injection pressure : 1892 bar Stroke volume : 377 cm³ Pump drive power : 22 kW Heating power : 16 kW Oil filling (l) 345 Dimensions: 4.66 x 1.51 x 2.19 m Total machine weight : 6200 kg Max. mould weight : 1485 kg Availability : two identical machines

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Golhcdwov Stbmewsbl Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: ready for operation (used), Year of construction: 2006, operating hours: 43,485 h, Functionality: fully functional, clamping force: 2 kN, screw diameter: 45 mm, displacement volume: 305 cm³, Stock-No. 13972 Manufacturer Krauss Maffei Type of machine KM 200 – 700 C1 Year 2006 Controlversion MC 4 Screentext German Working hours 43000 h Clamping unit: Clamping force 2000 kN Mould opening force, max. 101 kN Travel force movable platen opening 50 kN Travel force movable platen closing 42 kN Size of mould platens (h x v) 915 x 915 mm Distance between tie bars (h x v) 560 x 560 mm Mould opening stroke 700 mm Mould height min 350 mm Max. daylight 1050 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 45 mm Ls/D ratio 22 Injection pressure 2336 bar Stroke volume 305 ccm Shot weight (PS) 278 gr. Injection rate 200 ccm/s Screw speed 342 1/min Plasticising rate max. 37 g/s Nozzle pressure 84 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 30 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 5,50 x 2,20 x 2,30 m Total machine weight 10.530 kg Max. mould weight 2535 kg Accessories: - Anti vibration pads - 4-fold water flower - Conveyor 2000 x 500 x 1000 mm - Krauss Maffei Robot LR100 X: 550 mm Servo Y: 1200 mm Servo Z: 2500 mm Servo C: 0 - 90° pneumatic Gjlhcdwouccyuewjbl Additional Options: - 1 x air valve - 16 x hot runner controller - 2 x hydr. core pull - 4 x pneumatic sequentional valve

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Gslhcdjub S R Hewwsbl Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: repair required (used), Year of construction: 2001, operating hours: 69,000 h, Functionality: limited functionality, clamping force: 1,250 kN, screw diameter: 45 mm, For sale is a KraussMaffei injection molding machine of the type KM 125-700C2 The machine itself is fully functional, unfortunately the injection unit has a leak which needs to be repaired. Technical data Year of construction: 2001 Operating hours: 69,000 h Clamping force: 125 t Gelhsu Hxl Rocdwwobl Cylinder Ø: 45 mm Valve gate: Pneumatic Core pull: 2*Hydraulic Internal pressure transducer On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2014, Krauss Maffei KM 200-750 CX with the Wittmann-Krauss Maffei LRX100-1811 robot Year of construction: 2014 Injection unit: Screw diameter: 45 mm Injection weight: 289 g Injection pressure: 2336 bar Metering volume: 318 ccm Clamping unit: Clamping force: 200 t Distance between tie bars: 560x560 mm Size of the clamping platens: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touch screen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Min. tool installation height - 350 mm Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners x 24 Hardened injection unit - bimetal Parallel movements Proportional valve on the injection unit - Precise injection Kistler sensor - mold pressure control Wittmann-Krauss Maffei LRX100-1811 robot Gjlewigrrehcdwwsbl Year of construction: 2014 High-speed robot 5-axis robot: 3 axes are driven by servomotors (electric); axes B and C - pneumatic Touch control panel Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 11500 kg Length/width/height: 5.32x1.98x2.06 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2014, Krauss Maffei KM 160-750 CX with the Sepro Industrial Robot SDR 22S / Hybrid machine / Operating hours: approx. 34,000 h in automatic mode Year of construction: 2014 Injection unit: Screw diameter: 45 mm Injection weight: 289 g Injection pressure: 2336 bar Metering volume: 318 ccm Clamping unit : Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping platens: 820x845 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 - touch screen Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 34,000 h in automatic mode Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Control unit with hot runners Hardened injection unit - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) The machine was purchased from the first owner in October 2016 There is an option to purchase an additional Krauss Maffei hot runner controller, 24 hot zones, for an additional charge Robot Sepro Industrial Robot SDR 22S Year of construction: 2019 4-axis robot: 3 axes are driven by servomotors (electric); axis C - pneumatic Travel in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 8200 kg Length/width/height: 5.00x1.60x2.10 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Gelewigrfshcdwwjbl Price: On request

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 130-750 CX PolySet Year of manufacture: 2010 Injection unit: Screw diameter: 40 mm Injection weight: 228 g Injection pressure: 2500 bar Dosing volume: 251 cc Clamping unit: Clamping force: 130 t Type distance: 470 x 470 mm Clamping platen size: 745 x 770 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core puller x 1 Air core puller x 6 Control system with hot runners x 18 Injection unit hardened - bimetal Proportional valve on the injection unit for precise injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90 x 1.60 x 2.10 m Gbolhcdwswigq Uowsl All machines offered are tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2012, Krauss Maffei KM 130-750 CX / Hybrid machine / Operating hours: approx. 30,000 h in automatic mode Year of construction: 2012 Injection unit: Screw diameter: 55 mm Injection weight: 432 g Injection pressure: 1564 bar Dosing volume: 475 ccm Clamping unit: Clamping force: 130 t Distance between tie bars: 470x470 mm Size of the clamping platens: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Additional equipment: The machine is in a very good technical condition and worked in clean production in single-shift operation Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 h in automatic mode Euromap 67 Robot interface Control system with hot runners Hardened injection unit - bimetal Main machine motor - Servomotor driven by inverter - Energy saving Proportional valve on the injection unit - Precise injection 8-section rotameter The machine has been regularly serviced by an authorized Krauss Maffei service center in Germany Dimensions Weight: 8000 kg Length/width/height: 4.90x1.60x2.10 m Drive: Pumps/motor: 22 kW Gelhcdwowigqnswsbl Heating output: 15.62 kW Total output: 37.62 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 110-750 CX / Hybrid machine / Operating hours: approx. 35,000 h in automatic mode Year of construction: 2011 Injection unit: Screw diameter: 55 mm Injection weight: 432 g Injection pressure: 1564 bar Dosing volume: 475 ccm Clamping unit: Clamping force: 110 t Distance between tie bars: 470x470 mm Size of the clamping platens: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 Additional equipment: The machine is in a very good technical condition and worked in clean production in single-shift operation Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 35,000 h in automatic mode Core pull control Control system with hot runners Hardened injection unit - bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit - Precise injection Gbolhcdwewigpwowol 8-section rotameter The machine has been regularly serviced by an authorized Krauss Maffei service center in Germany Dimensions Weight: 8000 kg Length/width/height: 4.90x1.60x2.10 m Drive: Pumps/motor: 22 kW Heating output: 15.62 kW Total output: 37.62 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request