Used Linck V18 for sale (59)

Condition: like new (used), functionality: fully functional, Montini 48 V - 180 A charger Lhjdpfx Aev Tdq Ujfpjg Tested by a specialist on March 26, 2025, with a report Condition: like new / barely used

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Mitsubishi, controller model: M80B, table load: 255 kg, spindle speed (max.): 20,000 rpm, HAITIAN PRECISION TAPPING CENTER V-180 SHOWROOM MODEL, AS GOOD AS NEW V-180 specification: Controller:M80B Spindle air blow Spindle air seal Spindle oil chiller Pneumatic and lubrication system Coolant system Rigid tapping Direct drive spindle 20000rpm 16T disc type ATC 3-color signal lamp,working light X travel mm 500 Y travel mm 400 Z travel mm 330 Spindle nose to table surface mm 150-480 Table size mm 650×400 Table load kg 255 T slot mm 14×125×3 Drive type Direct drive Max.spindle speed rpm 20000 Spindle power (S1/S6) kW 3.7/5.5 Spindle torque (S1/S6) N.m 11.7/17.5 Spindle taper BT30 Pull stud MAS-P30T-1 Rapid traverse (X/Y/Z) m/min 48/48/48 Cutting feedrate (X/Y/Z) m/min 30/30/30 Max.tool dia. (Adjacent/Vacant) mm Φ60 / Φ80 Max.tool length mm 250 Max.tool weight kg 3 Tool change time s 1.6 Positioning accuracy X/Y/Z mm 0.010 Repeatable positioning accuracy X/Y/Z mm 0.006 Power capacity kVA 15 Machine weight t 2.5 Machine size(L×W×H) mm 1620×2080×2380 Lhsdpfxeywvh Ej Afpjg

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 24205, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,800 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 100 mm, workpiece length (max.): 4,800 mm, workpiece width (max.): 1,800 mm, number of slots in tool magazine: 18, overall weight: 16,000 kg, spindle motor power: 12,000 W, number of spindles: 1, workpiece diameter (max.): 1,800 mm, Equipment: chip conveyor, documentation/manual, Exceptional machine and exceptional quality output. Machine was serviced by IMA technicians and original spare parts where used. Optic fiber and most of the compressed air pipes have been replaced with new ones. The automatic positioning of the vacuum cups is speeding the setup time. ImaWoop version 6.0 with Quicktool is making the operator life easier. You are always welcome to see the machine working. Anytime, a live visualisation of the machine through video link is available. CNC-portal processing centre make: IMA type: BIMA P 480 V, 180/480 Year of production: 2001 Short description Machine able to do a lot of complex tasks (milling, drilling, cutting, edgebanding, various angle cutting) - alternate processing - X = 2 x 2.400, Y = 1.800 mm - main spindle 12 kW - 18-fold tool changer - gluing unit with 6-fold coil-magazine Description working area with standard units Y = 1.800 mm changing table area with alternate processing: X = 2 x 2.400 mm /milling- and boring processing X = 2 x 2.100 mm /gluing processing CNC-line control IMATRONIC NT 231 Software Imawoop 6.0 automatic positioning of the vacuum cups Automatic lubrication Conveyor for waste and chips (belt) main spindle 12 kW with integrated C-axis 360 degrees autom. tool / adapter units changer 18-fold 1 edge gluing unit VT100 with glue application device edge thickness: 0,4 – 3 mm for 4-sided edgebanding and all around edgebanding with butt joint 6-fold coil magazine Lhedpfx Ajtt Rpwefpeg 1 end-trimming unit 0,8 kW adapter units included - saw, 90 degrees fixed - horizontal drilling unit with 4 ways - ABS edge milling unit - ABS edge radius scraper and horizontal scraper unit other adapters and tools available for extra cost Chip removal transport belt Air conditioned included in the electric cabinet

Condition: good (used), Min. Pipe length: 100-1800 mm The system was previously used for deburring cut pipes! Lsdpsq U Rccofx Afpehg

Condition: used, Comec double drilling and mortising machine Horizontal spindles: n.4 spindles (right + left) with 2 oscillations Vertical spindles n. 3 right heads with 3 points each n. 1 right-hand chuck with 1 tip n. 3 left heads with 3 points each Lhodpfx Afsv Abfnjpog n. 1 left chuck with 1 tip Maximum length of the workable piece: 900 mm

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 215 mm, turning length: 1,250 mm, turning diameter: 380 mm, weight of the machine ca. 1800 kg dimensions of the machine ca. 2,7 x 1,2 x 1 m Lhodpfx Afju R R I Sspjg The lathe is in good condition seccond lathe SV18RA was purchased 10 years ago afte complete refurbish including digital measuring accesories uppon request offer valid for 2 machines with complete accesories, including dismantling and loading.

Condition: ready for operation (used), Year of construction: 2008, number of axes: 3, This 3-axis Weeke Venture 1M CNC Wood Machining Centre was manufactured in 2008. It features a horizontal drilling unit with 6 individually programmable spindles and a grooving saw aggregate for X-Y direction processing. The machine is equipped with an automatic tool change spindle and a rear automatic tool changer with 6 positions. If you are looking to get high-quality wood machining capabilities, consider the Weeke Venture 1M machine we have for sale. Contact us for further details. • Configuration: V18 High Speed 7500 • Positioning system: Console table with laser positioning aid Lhodoy Hr Rnspfx Afpjg • Drilling unit: Horizontal drilling unit with 6 individually programmable spindles • Grooving unit: Grooving saw aggregate, 90° swivelling, for X-Y direction processing • Spindle: F1-HSK63, 9 kW, automatic tool change spindle • Tool changer: W6 rear automatic tool changer with 6 positions • Tool change assistance: Tool change aid device • Control system: Power control PC85T • Safety: CE-certified safety and protective equipment

Condition: excellent (used), functionality: fully functional, Robust Möhringer auxiliary wagon in steel construction. Reinforced. Can also be used as an auxiliary wagon for other clamping trolleys with a 900 mm gauge, such as Linck, Weiss, Mayerhofer, etc. Gauge: 900 mm. Wagon height: 420 mm. Tilting carriage with continuous chain, powered. Ljdpfx Ajwv Rcuefpshg Hydraulic carriage for round timber, hydraulically adjustable and tiltable. Feeding from both sides possible. Technically inspected.

Condition: excellent (used), Year of construction: 2021, Efi Vutek H5 Under service contract since installation in 2021. Configuration: 8 colors + w For extra 9.000€ extra we can include RIP Caldera V18 with driver and profiles and 100 liters of inks, 20 liters per colours CMYKW . (which costs 14.000€) Lodpfx Aexanwzefpshg Productivity: 109 boards per hour Under production. Price includes decommissioning and loading on truck. Pictures and videos available upon request. For further technical information, please refer to enclosed brochure.