Used Velo Vertical Kieselgur Filter 10 M2 for sale (40,264)

Condition: excellent (used), Velo Kieselgur filter vertical 10 m2 used in beverage industry, in very good condition. Complete with wiring and control desk. Lodpoq U A Huefx Aa Iohg

Condition: good (used), Year of construction: 2012, operating hours: 1,150 h, fuel type: electric, Haulotte Star 10 Electric Mast Lift / Vertical Boom Lift, 10m working height, 2012. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. Lhjdoy T Hxaopfx Aa Isg All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You are welcome to schedule a non-binding appointment for an inspection and/or test drive. Please call beforehand, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2014, operating hours: 802 h, fuel type: electric, Haulotte Star 10 Electric Mast Lift / Vertical Boom Lift, 10m working height, 2014 A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). Ljdpfx Aasy T Hw Ae Ijhg You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2012, operating hours: 1,079 h, fuel type: electric, Haulotte Star 10 Electric Mast Lift / Vertical Boom Lift, 10m working height, 2012. A video can be sent via WhatsApp. Ljdpfxsy T Hwpo Aa Iohg We have a continuous stock; please see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You are welcome to schedule a non-binding appointment for an inspection and/or test drive. Please call beforehand, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2007, condition: used, Dimensions (LxBxH): 325 x 201 x 351 cm Quick coupler system: Yes Serial number: IN 64931/07 X-axis: 2500 mm Y axis: 1000 mm Z-axis: 800 mm Machine length: 3259 mm Machine width: 2011 mm Machine height: 3510 mm Model: LK V-SL High-accuracy coordinate measuring machine (HA) Renishaw control system Probe head controller: PHC 10-2 Interface selector: 191-2 Probe interface: PI 200 Laser control system: LC60DX Laser scanner accuracy: 9 µm Renishaw PH10M motorized indexing measuring head A-axis rotation: ±180° B-axis rotation: 0-115° Indexation step: 7.5° Total positions: 720 Maximum stylus weight: 300 g Maximum stylus length: 300 mm Position repeatability: ±0.4 µm SCHUNK quick-change clamping system Model: VERO-S NSE plus 90 Module diameter: 90 mm Operating pressure: 6 bar Clamping force: 25,000 N (25 kN) Material: hardened stainless steel Operation: pneumatic actuation with mechanical self-locking Positioning accuracy: ≤ 0.005 mm Last calibration: 19-09-2024 Renishaw control system: Probe head controller: PHC 10-2 Interface selector 191-2 Probe interface PI 200 Lhsdpfx Aaey T Razs Ieg TP 200 Renishaw probe Laser control system. LC60DX The LC60Dx is designed for high-speed, medium-range 3D laser scanning on coordinate measuring machines (CMMs). It offers excellent performance when scanning large parts, such as molds, car panels or structural components, with accuracies of up to 9 microns. Renishaw PH10M - Motorized indexing measuring head Rotational axes: A-axis: ±180° B-axis: 0-115° Indexing step: 7.5° → giving a total of 720 positive positives Interface: Autojoint/M8 connector (compatible with modular test systems such as Renishaw TP200, SP25M or Nikon/Metris laser scanners) Maximum stylus weight: approx. 300gr Maximum stylus length: up to 300 mm Position repeatability: ±0.4 µm (0.0004 mm) Applications: Measurement of parts with complex shapes (turbine blades, molds, housings, etc.). Used with probes such as Renishaw SP25M, TP200 or Nikon/Metris LC15Dx Compatible with most CMM brands (DEA, Hexagon, Mitutoyo, Wenzel, LK, etc.) SCHUNK - quick-change clamping system for use on CNC machines. It is intended for securing pallets, clamping workpieces on the machine table with very high positioning accuracy (up to 0.005 mm). Manufacturer: SCHUNK (Germany) Model: VERO-S NSE plus 90 Type: Quick-change clamping module Module diameter: 90 mm Operating pressure: 6 bar Clamping force: up to 25,000 N (25 kN) Material: hardened stainless steel Operation: Pneumatic operation with mechanical self-locking Positioning accuracy: ≤ 0.005 mm Already partially disassembled Resale at reduced prices from the online auction of a former tire mold manufacturing plant with high-end metalworking machines and tools (e.g. 2 BRETON CNC machining centers, FANUC 6-axis robotic arm, STAUBLI precision milling robot, Nikon coordinate measuring machine (CMM), OMV CNC milling machines, MARIO CANARGHI CNC carousel lathe, CHARMILLES spark erosion machine, SM Systems advanced laser/microlasher, HINDENLANG induction furnaces, etc.), workshop tools, spare parts, rolling stock (e.g. TOYOTA, STILL...

Condition: used, Combi filter (kieselgur- and sterilising filter) for beer filtration with hydraulic pressure, 100 x 100 cm filter plates and external risers. Additional title: combination filter Capacity: 120 hl/h Plate size: 100 cm edge length Length: 7000 mm Width: 1500 mm Height: 1500 mm Position: horizontal Lhsdevcqlwopfx Aa Isg Base construction: mounted on steel frame, standing on feet Features: 31 kieselguhr layers (32 frames), 50 sterilisation layers, 4 pressure manometers (10bar), 6 lanterns, risers, kieselguhr discharge screw (Allweiler), gravity measurement, flow measurement, 3 x turbidity measurement (inlet, outlet Kieselgur filter, outlet 3 x turbidity measurement (inlet, outlet kieselgur filter, outlet sterilisation filter). Spare parts: 295 sealing rings for filter plates, 3 kieselguhr filter support plates

Condition: used, Year of construction: 1992, Technical details: lifting capacity : 2,0 t lifting height max. hook position: 2,3 m travel of hook: max. 3000 mm wheel base: 520 mm total power requirement: 2,3 kW Crane with carrier and electric rails: -double - T - beam 200 x 200mm, length approx. 10.100mm, travel 9.000,00 mm -Steel lifting gear, load capacity 2000kg, lifting class DIN 15018, lifting speed 0.80 / 5 m/min, lifting height 3 m, travel speed 10 / 2.5 m/min, track 200mm, axle distance 520mm, Chain hoist, hook -Pendant control panel Pendant station -div. mounting holes Lhsdpfxju Nvgds Aa Iog *

Condition: good (used), - Number of plates: 20 - Number of cloths: 20 filter cloths, Monofil special Dimensions: Lhedpfx Aasv Uw R Rj Ieg - Length: 1600 mm - Width: 600 mm - Height: 1300 mm - In working order

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". Lsdpoyug Hxefx Aa Ishg The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar 1000 lts/min Very low running hours - 1351 run hours Complete with three filter set Lodpfx Aasxaxr Ne Iohg

Condition: excellent (used), Bandskimmer Brand Polo filter Bremen Immersion depth maximum 600 mm Band width 100 mm Ljdsdx E Hcspfx Aa Iehg 220 volt Operating voltage 24 volt Weight 11,5 kg Shipping dimensions: L. 420 x B. 260 x H. 550 mm

Condition: good (used), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing -Inlet/Outlet: Ø 52/46 mm -Part Number: 44 100 92 921 -with air filter: C 11 100 -Quantity: 6 air filter housings available -Price: per piece -Dimensions: Ø 190/285 mm -Weight: 1.15 kg Lhjdpfx Aaed Swrke Iog

Condition: excellent (used), functionality: fully functional, Velo filter system In excellent condition Lhjdpjwn D Nrjfx Aa Iog

Condition: excellent (used), Hurco VM20i Vertical Machining Centre (2014) Travels X: 1,016 mm Y: 508 mm Z: 508 mm Table size: 1,168 × 508 mm Max load: 1,800 kg T-slots: 5 × 18 mm Lhodpfx Aaey Nzw Ao Ijg Spindle Taper: SK40 / CAT40 Max speed: 10,000 rpm Power: 15 kW Torque: 99–102 Nm Weight: 4,150 kg Footprint: 3.7 m × 3.0 m Height: 2.5 m Additional Features: Year 2014 4th Axis & Tailstock Reishaw Probe Tooling

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 1,300 mm, table length: 550 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II INFO was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II INFO vertical machining centre we have for sale. Contact us for further details. - Total Operating Time: 17,659 hours 12 minutes 03 seconds (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours 38 minutes 37 seconds- Automatic Machining Time: 5,877 hours 48 minutes 01 seconds- Operating Time / Power On Time: 26,902 hours 54 minutes 33 seconds- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection) Lhjdpfsy T Hbzsx Aa Ijg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: SMK00004, SPECIFICATION X Travel 1020mm Y Travel 610mm Lhsdpfx Aaoy E I A Do Isg Z Travel 620mm Table size 1200 x 600mm Spindle to table 140 – 760mm Spindle speed 12,000rpm Spindle motor 15kW Spindle taper BT40 Tool magazine capacity 24 Machine weight 8000Kg Footprint (W x D x H) 3650 x 2900 x 2900mm approx. MACHINE EQUIPPED WITH: - Siemens 840D CNC control (with Shopmill) Swarf conveyor 4th axis Renishaw tool setting probe Through spindle coolant system Lighting Enclosed guarding

Condition: new, roll diameter / mm throat / mm workpiece height / mm Vertical band saw – Model P70.110 Capacity 90° (mm) Height: 700 mm Width: 1100 mm Length: 6000 mm Motors Main motor (saw blade drive): 5.5 kW Hydraulic motor: 1.5 kW Coolant pump: 0.25 kW Feed servo motor: 1.5 kW Chip conveyor: 1.1 kW Further technical data Saw blade size: 7770 × 54 × 1.6 mm Material feed height: 1440 mm Hydraulic oil tank capacity: 40 l Coolant tank capacity: 190 l Machine dimensions (H × W × L): 4500 × 4000 × 8700 mm Lhjdpey Eh A Dsfx Aa Ieg Weight: 20,000 kg Standard equipment - Hydraulically driven chip brush - Speed control device (belt speed adjustable via frequency converter) - Servo feed system (1–500 mm/min) - Hydraulic saw blade tensioning - Saw blade break detection and stop system - Touchscreen user interface - Laser line display (laser marking) - Scraper-type chip conveyor - Hydraulically movable arm (automatic) - Chip trolley / chip container - Material alignment piston (for aligning the material) The images are for guidance only and are not a true-to-scale representation of the machine.

Condition: used, functionality: fully functional, empty load weight: 7,990 kg, maximum load weight: 28,010 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2023, loading space length: 13,450 mm, loading space width: 2,450 mm, loading space height: 2,700 mm, loading space volume: 89 m³, suspension: air, tire size: 385/65 R 22,5, color: white, Year of construction: 2023, Object number #30572 Cargofloor 10 mm moving wall pneumatic door locking Jost axles disc brakes 2x lift axle Lhsdpfx Aox Art Soa Iog tyres 385/65 R 22.5 body inside dimensions: 13,450 x 2,450 x 2,700 mm portal doors rolling tarp platform with ladder Wabco Smart Board with 212,081 km toolbox work lights side underrun protection holder for ladder/broom rear light guards raise/lower function ABS/EBS Jost landing gears Leasing or financing available on request!

Condition: like new (used), Year of construction: 2014, functionality: fully functional, stroke length: 200 mm, controller manufacturer: Amada, controller model: Amada AB-Pad, number of axes: 4, Equipment: documentation/manual, Model: Amada HFE M2 100t 3m, 4-axis press brake Year of manufacture: 2014 Available immediately Press force (kN): 1000 Beam length (mm): 3110 Frame gap (mm): 2705 Throat depth (mm): 420 Standard stroke (mm): 200 Standard open height (mm): 470 Beam width (mm): 60 Table height (mm): 960 Approach speed (mm/s): 1-100 Bending speed (mm/s): 1-10 Return speed (mm/s): 1-100 Number of controlled axes: 4 Lsdpfjynbfvex Aa Iehg Length (mm): 4580 Depth (mm): 2450 Height (mm): 2685 Weight (kg): 6900 Safety device: AKAS type, additional pair of back gauge fingers Support arm for hanging, height adjustable with 2 lateral stops Hanging element for support arm and table, suitable for HFE-M2 series

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Ledpfx Aaov Iq Ezo Iehg Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: reconditioned (used), functionality: fully functional, operating pressure: 200 bar, empty load weight: 168 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 10/20-4M HOT WATER PRESSURE WASHER NEW HEATING COIL Manufactured in 2019 and with only 130 hours of operation The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 200 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 10/20-4M Power supply voltage 400V ~ 3 phases Pumping capacity (l/h) 500 - 1000 Operating pressure (bar) 30 - 200 Max. Water heating temperature (°C) 80-155 Connection power (kW) 7.8 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 168 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW HEATING COIL Lhedpoy Txq Ujfx Aa Ieg NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limit Two built-in chemical tanks They allow for the dispensing of cleaning fluid directly through the machine. A clearly laid-out and intuitive control panel. A simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. An exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: new, Forklifts and pallet trucks Jungheinrich – EFX 413 / AM 2000 X / EMC 110 / TMX 10 / BT SPE 125 Lhsdpfxjy H Evkj Aa Isg

Condition: used, Year of construction: 2002, functionality: fully functional, grinding width: 1,100 mm, overall weight: 6,600 kg, type of input current: three-phase, The machine is in working condition. 2+2 level grinding is possible. Lodpfx Aaeyybgrs Iohg

Condition: used, Year of construction: 1994, ALKO Disposal Clean air filter module, FM RG 5/100 HD high-pressure Year of manufacture: 1994 Dust extractor designed for capturing, conveying, and separating wood dust and chips at individual dust sources. Industrial vacuum cleaner for vacuuming and separating deposited wood dust and chips. 400 Volt Ledpjw A Ad Rjfx Aa Iehg Nominal hose connection D = 100 mm Continuous operation 3-phase alternating current Dimensions: 1090 x 580 x 1680 mm Weight: 55 kg Filter cleaning: Manual shaking system

Condition: new, functionality: fully functional, he EUROPA JAINNHER JHV-1008CNC vertical grinding machine is designed for grinding of large components used in the transport, aerospace, power generation, oil & gas, hydraulic and precision components. With a grinding internal diameter range from Ø50 to 800 mm, a maximum outside diameter of Ø1000 mm. The maximum height of the workpiece is 800mm, with a maximum worktable load of 1200 kg. Lhjdpjnzkvhjfx Aa Ieg EUROPA Jainnher JHV-1008 CNC Vertical Grinder Capacity Range of I.D. grinding 50 – 800mm Maximum O.D grinding 1000mm Z axis maximum grinding height (OD) 800mm Z axis maximum grinding height (ID) 50 – 250 : 325mm / 250 – 800 : 800mm Maximum swing diameter 1000mm Maximum installed component height 800mm Maximum work table load 1200kg Email for latest factory build availability