Turn-Mill Centre

Mazak Integrex i-400S

Condition: excellent (used), Year of construction: 2018, operating hours: 40,807 h, functionality: unexamined, Full 5-axis. Max. swing diameter over cross slide ø658 mm (ø25.9"). Max. machining diameter (upper turret) ø658 mm (ø25.9"). Max. machining length 2,497 mm (98.31"). Max. bar capacity ø102 mm (ø4.02"). X-axis travel 615 mm (24.21"). Z-axis travel 2,563 mm (100.91"). Y-axis travel 260 mm (10.24"). B-axis indexing range -30° to 210°. Main spindle chuck size 12". Main spindle speed 1 – 3,300 rpm. Main spindle nose A2-8. Main spindle bore ø112 mm (ø4.41"). Main spindle indexing increment 0.0001°. Hydraulic chuck for the sub-spindle (10" through-hole chuck B-210A0815X). Sub-spindle speed 1 – 4,000 rpm. Sub-spindle travel (W-axis) 2,175 mm (85.63"). Main spindle nose – A2-8. Main spindle bore – ø91 mm (ø3.58"). Bearing ID – ø130 mm (ø5.12"). Min. indexing increment – 0.001°. Milling spindle type: turret with automatic torque control. Milling spindle speed 12,000 rpm. Max. milling spindle torque 120 Nm (88.5 ft·lbs). Turning tool shank height 25 mm (1"). Boring bar shank diameter ø40 mm (ø1.5"). Rapid traverse speed: X-axis 50 m/min (1,969 ipm). Rapid traverse speed: Z-axis 40 m/min (1,575 ipm). Rapid traverse speed: Y-axis 40 m/min (1,575 ipm). Rapid traverse speed: W-axis 30 m/min (1,181 ipm). Tool holder interface HSK-A63 (T63). Tool magazine capacity: 72 tools. Max. tool diameter/length (from reference line) ø90 mm (ø3.54") (if adjacent tool positions are empty: ø125 mm (ø4.92"))/400 mm (15.75"). Max. tool weight 12 kg (26.46 lbs). S/Nr. 285804 (2018/04). Note: No tools included. Gkedpfxsxdbuuj Afcjd With Mazatrol SMOOTH X CNC control. Hydrafeed MSV110 bar feeder S/Nr. C02-18L28. SMW-AUTOBLOCK Telbrook T-17915 SLU-X 3.2 Stable, ø50–200 mm. Filtration Service Engineering E7377 chip management system S/Nr. 21025 (2019). Tool interface (upper turret/automatic). Dual foot pedal switch for the chuck. Through-spindle coolant supply. Simultaneous delivery of 0.5 MPa (70 psi) coolant through spindle and coolant supply (upper turret). Long drill holder, tool length 400 – 1,000 mm, max. ø80 mm. Machine dimensions: L 6,390 mm x W 2,945.5 mm x H 2,770 mm. Machine weight 20,400 kg.

Condition: used, Year of construction: 2019, travel -x axis 1.525 mm travel -y axis 770 mm travel -z axis 625 mm control HEIDENHAIN - TNC620 table dimension (L x W) 1.600 x 750 mm numbers of positions in the tool changer 24 tool taper SK50 Milling machining centers - vertical | DOOSAN - MYNX 7500/50 II equipped with 24-way tool changer, ITC cooling system and chip conveyor. The machine only has 3.165h spindle hours. The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. Gkedpfx Aewq S Axefcod Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MYNX7500/50II | MYNX 7500 | MYNX7500 | MYNX-7500 | MYNX750050II

Condition: good (used), Year of construction: 2011, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Technical data: Control: Mazatrol 640M Travel X – Y – Z axis mm: 1740 / 760 / 660 Rapid traverse X – Y – Z axis m/min: 36 / 36 / 36 Table Table size mm: 2000 x 760 Table load capacity kg: 1,400 Distance between table surface / spindle nose mm: 160 – 840 Main spindle Speed min-1: 12,000 Main drive power (5 min. / 30 min.) kW: 18.5 / 11 Automatic tool changer (ATC) Gkodpfxjwpu Hdo Afcsd Number of positions / spindle taper: 30 / SK 40 Max. tool diameter mm: 80 - with free adjacent positions mm: 110 Max. tool length mm: 350 Max. tool weight kg: 8 Machine height mm: 3442 Installation area mm: 4435 x 3300 Machine weight kg: 11,500 Accessories: Relocation detector Automatic tool length measuring system Preparation for partition for pendulum machining Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant 5 bar Chip conveyor

Condition: good (used), Year of construction: 2009, functionality: fully functional, turning length: 1,500 mm, turning diameter: 550 mm, spindle motor power: 22,000 W, spindle speed (min.): 3,800 rpm, spindle bore: 80 mm, power: 22 kW (29.91 HP), Equipment: rotational speed infinitely variable, Okuma Macturn 350 2SW-1500 Big Bore main spindle, machine type CNC turning-milling center Make / manufacturer Okuma Okuma Model / type MacTurn 350 2SW1500 BigBore Year of manufacture 2008 / 2009 Control OSP P 200 L IGF One Touch Advanced + CAS Spindle turning time 6437 h Technical data Max. turning diameter: 550 mm Max. turning length: 1,500 mm Travel path of upper turret (milling spindle): X-axis: 505 mm/190 mm/1670 mm Y-axis: 190 mm (+95 /-95) Z-axis: 1670 mm W-axis: 1680 mm Travel path of lower turret: X/Z 210 mm/ 1670 mm Main spindle “Big Bore” version Spindle motor main spindle 22 kW, 412 Nm Max. speed main spindle 3800 rpm Spindle nose main spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm C-axis 0.001 ° Counter spindle “Super Big Bore” version Spindle motor counter spindle 22 kW, 412 Nm Max. speed counter spindle 3300 rpm Spindle end counter spindle JIS A2-8 Spindle passage 80 mm Gjdpfx Asvta Rdefcjkd Max. bar diameter: 71 mm Milling spindle Spindle motor milling spindle: 11 kW Max. speed milling spindle: 12000 rpm Tool holder: HSK 63 B-axis: 0.001° Tool magazine: 44 stations Lower turret Tool positions: 12 Tool holder: VDI-40, Driven tool stations: 12 positions Max. power of driven tools: 7.5 kW Max. speed of driven tools 4500 rpm Machine weight: approx. 15,000 kg Space requirement 6000 x 3500 x 3000 cm Other features - High pressure cooling 40 bar - Chip conveyor Interlit ISF 614 - Heavy crane filter Interlit SBP 4 - Touch Setter - Helical Cutting - 4 Extra M-Code Set - 2x hydraulic power chuck SMW BH-D 315-95 diam. 250 mm - DNC- T1 interface - RS 232 C interface - Chuck blow-off function main counter spindle - TAS -S + TAC-C Status report after commissioning in Bergisch Gladbach Geometry measurement results Reverse play XA - axis 0.015 mm Reverse play XB - axis 0.015 mm Reverse play ZA - axis 0.020 mm Reverse play ZB - axis 0.020 mm Reverse play Y - axis 0.010 mm XA - axis measured with measuring mandrel at 300 mm 0.02, YA at 300 mm 0.007in T1,T2, T3 B-axis: alignment and function good M-drive lower turret: tested and good Milling spindle: tested up to 6000 rpm, no abnormalities Main/counter spindle tested , no abnormalities High pressure pumps function well, no abnormalities Accessories - 2 x hydraulic crane chuck SMW - pallet with 16 driven tool holders, 10 HSK 63 holders, 3 VDI 40 holders - lifting hook on the front - all original axle locks Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: excellent (used), Mazak Integrex E-650H Multi-Tasking Lathe Mazatrol PC-Fusion 640M Pro Control, Gkjdpfovgzm Tox Afcod 3000mm B/C, SMW-Autoblock KS-MSW 135-460mm Hydraulic Steady, Boring Bar Attachment, 120 ATC, Swarf Conveyor. S/No. 159927 (2002)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 22,398 h, Control Unit Brand HEIDENHAIN Model 530 Main Drive Spindle speed range 18000 Number of axis 5 Movement X-Axis Movement 400 mm Y-Axis Movement 400 mm Z-Axis Movement 375 mm Tools Slots in storage 30 Gedpowtivujfx Afcskd Type of tool holder HSK63 Additional Equipment 30 tools in magazine This DMG DMU 40 evo Vertical Machining centre was made in 2012 in Germany and has 22398 production hours. It is equipped with a HEIDENHAIN 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. It doesn't have internal cooling but has 30 tools in magazine. Application Types Milling

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller OKUMA OSP P200-M Table size 1000 x 460 mm Table load 700 kgs X travel 762 mm Y travel 460 mm Z travel 460 mm Spindle speed 15000 rpm Gsdpfx Afouu Rwyecjkd Tool holder type MAS BT40 ATC magazin 20-fold Weight 6500 kgs Dimensions LxWxH = 2750 x 2160 x 2715 mm Features, accessories - Chip conveyor - Coolant unit - Spindle cooler - CTS - Manuals Very good condition.It will be sold because of liquidation of production.

Condition: used, Year of construction: 2016, travel -x axis 350 mm travel -y axis 550 mm travel -z axis 510 mm travel -A axis -120 / +30 ° c-axis 360 ° control MAZATROL Matrix Nexus 2 number of spindle speeds 12.000 U/min numbers of positions in the tool changer 30 tool taper SK 40 weight of the machine ca. 7,0 t 5-axis machining center | MAZAK - VARIAXIS j-500 equipped with internal coolant supply (15 bar) , a swivel axis, and a rotary table (ø 500). The machine has only approx. 4.000 H spindle hours. The machine is in a very well-maintained condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VARIAXIS j500 | VARIAXIS j 500 | VARIAXISj500 Gjdpfjw Ahywex Afcekd

Condition: used, TECHNICAL DETAILS - Quantity of spindles : 6 Gkodpfx Afeuhantocod - Bar clearance : 40 [mm] - Rotation speed : 7 000 [rpm] - Spindle power : 13 / 24 [kW] NUMERICAL AXES : 27 - Slides unit 1.1 : axes X and Z CNC-controlled - Slides unit 1.2 : axes X and Z CNC-controlled - Slides unit 2.1 : axes X and Z CNC-controlled - Slides unit 2.2 : axes X and Z CNC-controlled - Slides unit 3.1 : axes X and Z CNC-controlled - Slides unit 3.2 : axis Z CNC-controlled - Slides unit 4.1 : axes X and Z CNC-controlled - Slides unit 4.2 : axis Z CNC-controlled - Slides unit 5.1 : axes X and Z CNC-controlled - Slides unit 5.2 : axis Z CNC-controlled - Slides unit 6.1 : axis Z CNC-controlled + SCARA axis - Slides unit 6.2 : axes X and Z CNC-controlled - Slides unit 6.3 : axis X CNC-controlled ELECTRICAL INPUT - Voltage : 400 [V] - Frequency : 50 [Hz] - Installed power : 65 [kW] DIMENSIONS OF THE MACHINE - Floor space : 3329 x 2032 [mm] - Height : 2654 [mm] - Weight: 7100 [kg] HOURS - Hours under power : 45965 - Production hours : 19065 EQUIPMENT - CNC Siemens 840D (PL) double NCU - 2 control panels CN - 6 collet receivers TOPLUS with built-in stop - 1 counter-spindle in position 6.1 - Clamping device in counter-spindle : chuck Röhm KFD-HS 110/3 - Coolant through counter-spindle center - Cn options counter-spindle/ polygonal milling - Rear machining device on slide 6.2 : 3x fix - Preparation 2 additional controls with electronic shaft in position 1.2.3 - Preparation 2 additional controls with electronic shaft in position 4.5.6 - STAUBLI robot type TX60 (6 axes) - Robot collet double clamping external type PZN50 - Swiveling plate (4 positions) - Coolant tank KNOLL with hinged chip conveyor, 2 HP pumps 40 [bars] - Oil mist aspiration device Büschel - Cooling unit RIEDEL - Preparation ARTIS

Condition: good (used), Year of construction: 1987, turning diameter over cross slide: 810 mm, spindle bore: 130 mm, turning diameter: 1,140 mm, turning length: 7,500 mm, quill stroke: 300 mm, total length: 7,500 mm, total width: 2,300 mm, total height: 1,650 mm, bed width: 600 mm, Please note: not original pictures its only 3000 length not 5000 mm   3 Guide way construction 2 Axis HeidenHain Digital readout Feed in 3 directions all tool post slide Central lubrication   Work load flying in chuck 2500 kg Gksdov S Dp Iepfx Afcod Work load NOT supported 8500 Kg Work load supported 10000 kg   Optional 4 chuck approx. 1200 mm Optional 4 chuck approx. 1500 mm Optional package with 3 steady rest fixed model from  .... to ....  Turning length: 5000 / 7500mm Turning diameter bed Ø: 1140mm Turning diameter slide: 810mm Turning diameter pit Ø: 1500mm Pit length: 2500mm Spindle bore: 130mm Bed width: 600mm Quill: 130Ø Quill stroke: 300mm Spindle mount: 6Mk Power: 25kW Speed: 9 - 900rpm Length: 7500mm Width: 2300mm Height: 1650mm Weight: 12000kg