StairsLV LTD

Condition: good (used), Year of construction: 1988, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 32055, Wide belt sander - Veneer sanding - Solid wood - Intermediate lacquer sanding With 2 sanding belts: - 1st belt: cross sanding - 2nd belt: longitudinal sanding with segmented pressure beam Rsdpsyv H Akefx Al Ijt The machine is very well maintained and in good, ready-to-operate condition.

Condition: used, Year of construction: 1996, functionality: fully functional, Equipment: CE marking, Brusilica radne sirine 1300 mm. U dobrom stanju. Rodpfx Alswptrro Iet

Condition: good (used), Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Rsdpsv A Ta Dsfx Al Ist Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4630x3005x2334 mm Weight 12160 kg Total power requirement 135,6 kw Rjdpov A Hftsfx Al Ijt

Condition: new, - NEW -GENERAL FEATURES:machine frame and worktable* steel structure with electrical cabinet at the front of the machine* sanding belt infeed from the left side of the machine* motorized table height adjustment* main motor integrated in the machine frameelectrical equipment* electromechanical control panel on the front left side of the machine* automatic star-delta start for the main motor* motor protection switch for the motors* motors in insulation class IP 54emergency and protective devices* Safety microswitch for excess thickness* Automatic brake for immediate stopping of the units* Emergency stop safety edge in the workpiece infeed* Mushroom switch in the workpiece infeed and outfeed* Lockable main switch* Automatic emergency shutdown of the machine in the event of:- sanding belt breakage- untensioned sanding belt- protection against lateral movement of the sanding belt- lack of compressed air- overload of the main motorsNote: the standard version with 400 volts 50 Hz requires a three-phase power supply zero conductor ground the 400 volt power supply is without neutral, a single-phase transformer from the price list must also be ordered. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is present or machine version with 220 or 230 volts (50 or 60 Hz) is subject to additional costs (see price list).BASIC MACHINE STANDARD EQUIPMENT- R140/85 rubber-coated calibrating roller diam. 140 mm 85 Sh - 1st pos.- R160/45 rubber-coated sanding roller diam. 160 mm 45 Sh - 2nd pos.- Hard sanding pad with manual adjustment of the working height- Main motor 11 kW (15 HP)- Electronic ammeter for the main motor to display the power consumption- Electronic display of the working height- Electronically controlled sanding belt oscillation- Rubber pressure rollers- Kickback protection in the infeed in front of the first unit- Rubber feed carpet 60 Sh- Roller table with two rollers in the infeed and outfeed of the work table- Carpet feed with two speeds 4,5 / 9 m/min withgeared motor- automatic carpet centeringworking width mm 1.100Min./Max. working height mm 4 - 170Sanding belt width mm 1,115Sanding belt length mm 2,150Main motor power kW (HP) 11 (15)Gear motor kW (HP) 0.45/0.8 (0.6/1.1)Feed speed m/min 4.5/9Consisting of:10.90.87 European Safety Regulations(Mark C.E.)93.07.31 Volt 400 EU93.12.01 Frequency 50 Hz44.44.19 Version "B" for RCS33.31.50 Roller table in infeed and outfeed for long workpieces62.44.50 10" control panel with "eye-S" software integration31.21.60 "RA" inclined ribbed steel contact roller - 1st unit97.50.71 Main motor 15 kW (PS 20) Rsdpfxovwfrnj Al Ijt

Condition: used, Year of construction: 2000, Working width .- mm Rodpovwfl Uofx Al Iot With 1 sanding unit consisting of:- combination unit with electronic shoe for lacquer sanding- lacquer sanding- dust brush- roller table at infeed 270 mm- program control electronic f. 50 programswith brand-new feed carpetusedmake Bütferingtype Classic 111 Cyear of construction 2000machineNo. 63608Working width 1100 mmPassage height 160 mmCE type-testedGS wood dust testedBelt dimensions 1120 mm x 1900 mmFeed speed 4 8 m/min.1 piece combi unit 3.7/7.5 15 kW , 3 belt speeds with autom. steel rollerdiameter 130 mmbelt speed approx. 4,5 9 18 m/selectronic link shoesegment pitch 50 mmfor lacquer sanding workpiece controlledstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty

Condition: excellent (used), operating hours: 4 h, functionality: fully functional, total width: 2,000 mm, total height: 2,200 mm, total length: 1,900 mm, working width: 1,300 mm, grinding width: 1,300 mm, overall weight: 3,200 kg, height adjustment type: electric, table width: 1,300 mm, power of feed motor: 35 W, input voltage: 400 V, transport length: 2,100 mm, transport height: 2,200 mm, transport width: 2,000 mm, A high-performance wide belt sanding machine designed for processing wood-based panels, solid wood, plastics and metal. Suitable for both rough sanding and final finishing, ensuring excellent surface quality and stable, repeatable results. The machine is equipped with two independently controlled sanding belt units, allowing the use of two different grit sizes at the same time. Each belt has individual speed control, which prevents surface scratches, overheating and clogging of the abrasive paper. The conveyor belt table, combined with precise height adjustment, enables sanding of materials up to 100 mm thick. Thickness adjustment is controlled via a digital control panel, ensuring accuracy and ease of operation. Each sanding drum features independent speed control via frequency inverters and belt position sensors. These systems prevent belt misalignment and automatically stop the machine if improper belt tracking is detected, protecting both the machine and the workpiece. The sander includes a central dust extraction system, ready to be connected to industrial dust collectors or vacuum systems via Ø100 mm outlets. In addition, each sanding belt is equipped with a pneumatic belt cleaning system, continuously removing dust during operation. Abrasive belt replacement is quick and easy – a single clamp release allows the belt to be removed from the machine. The sander is compatible with standard abrasive papers available on the market, joined with adhesive tape. No special or proprietary abrasives are required. Rsdpfxjmrqlnj Al Ijt KEY FEATURES • working width: 1300 mm • two independently controlled sanding belt units • possibility to use two different grit sizes simultaneously • variable speed control for each belt (frequency inverters) • sanding capacity up to 100 mm material thickness • conveyor belt table with height adjustment • digital control panel • pneumatic belt tensioning system • pneumatic belt cleaning system • dust extraction outlets Ø100 mm • fast and easy belt replacement • semi-automatic operation The machine is in perfect condition. It was used for short-term demonstration purposes.