Binder Cable Assemblies Bt.

Condition: ready for operation (used), Year of construction: 2015, clamping force: 900 kN, controller manufacturer: ENGEL, controller model: cc300, This 4-axis Engel Victory 200/90 tech + Viper 6 RC300 was manufactured in 2015. It features a clamping force of 90 tonnes and an injection unit size of 200. The machine includes a central ejector system and a magnetic clamping system for enhanced efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/90 tech + Viper 6 RC300 hydraulic injection moulding machine we have for sale. Contact us for further details. ENGEL Victory 200/90 tech- Clamping Force: 90 tonnes - Injection Unit Size: 200 - Total Operating Hours (Machine): 15,903 h - Operating Hours in Automatic (Robot): 12,086 h - Clamping Platen Execution: Tie-bar-less standard platen according to EUROMAP - Centring Diameter: 125 mm EUROMAP - Magnetic Clamping System: Stäubli magnetic clamping plate - Ejector System: Central ejector with ejector safety interface - Heating System: 230 V ceramic cylinder heating bands ENGEL Viper 6 RC300- Maximum Manipulation Weight (Payload): 5 kg- Robot Axis Strokes: X-Stroke: 400 mm Y-Stroke (Single): 1,000 mm Z-Stroke: 2,360 mm C-Axis: Compact pneumatic rotary axis, 0–90° pivot, torque 6 Nm- Minimum Deposit Height: 1450 mm (center of unswiveled C-axis, without gripper head and part) - Max. Vertical Part / Gripper Head Size (TV): 200 mm - Maximum Total System Height: 4100 mm (handling and machine incl. machine shoes) - Part Deposit Side: Machine rear side - Entry Movement: Vertical Nsdpfx Abo Af Tyzjuswn

Condition: excellent (used), Year of construction: 2014, ARBURG A 370 S 700-290 U-Version (S&P 3804) Manufacture year: 2014 Operating hours: 41,257 Stunden Screw: 40 mm Injection pressure: 1530 bar Stroke volume: 188 cm³ Clamping Force: 70 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 600 mm Dimensions: 3700 x 1400 x 2000 mm Eeight: 3580 kg Connected load: 15 kW U-Version = clamping and injectionside could be turned into vertical and horizontal position, 1 x corepuller, 6 x hotrunner, Airvalve, Interface colorizing, 23.761 h automatic and 17.496 h manual... Nedpfxs Af Ryke Abujwn Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 50 t Mould installation height min.: 170 mm Plate distance max.: 520 mm Nwedpfxj Af Ru Re Abusn Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2016, ARBURG A 370 H 600-170 Integralpicker V (S&P 3801) Manufacture year: 2016 Operating hours: 45,447 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Nwsdpfj Af Rt Eox Abusn Clamping Force: 60 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 650 mm Dimensions: 4000 x 1700 x 2300 mm Eeight: 3700 kg Connected load: 5,5 / 26 kW incl. Integralpicker V, EM67, Interface color, Airvalve, Corepuller, electric Convejorbelt, Sorter Unit, price when new machine 104.200,- Euro + picker 10.500,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 61038312, clamping force: 10,000 kN, screw diameter: 95 mm, clearance between the columns: 1,420 mm, displacement volume: 3,367 cm³, injection pressure: 1,795 bar, injection weight: 2,391 g, opening stroke: 3,200 mm, total length: 10,860 mm, total width: 3,400 mm, total height: 2,640 mm, overall weight: 50,500 kg, drive type: Hydraulisch, clear span: 1,420 mm, tool weight: 2,100,000 g, Injection molding machines directly from the manufacturer! As the manufacturer, KraussMaffei offers you our tested and versatile stock machines: The hydromechanical two-plate clamping unit of the GX machine sets new standards in terms of quality and productivity. The sophisticated GuideX guide shoe absorbs forces ideally and increases the service life of the tools. The innovative GearX locking system engages immediately and reliably. The high flexibility of the machine is particularly evident in the multi-component version. In this piggyback arrangement (Z-configuration), the system is extremely compact, and no special hall height is required, making this design particularly suitable for confined spaces. TECHNICAL DATA: KM 1000 / 6100 GX G02 (Order 38611785) CONTROL  MC6 with 21.5” TFT color screen and multi-touch function CLAMPING UNIT  Clamping force kN 10000  Tool opening force, max kN 700  Daylight (h x v) mm 1420 x 1170  Mounting plate (h x v) mm 1950 x 1750 Njdps Afhmkjfx Abuewn  Tool installation height min. - max. mm 500 – 1200  Opening width mm 2400  Tool opening stroke max. mm 1900  Ejector drive Hydraulic  Ejector stroke mm 300  Ejector force forward/backward kN 142 / 76  Max. tool weight kg 21000 INJECTION UNIT  Screw diameter / type mm 95 / Standard  Effective Ls/D ratio 23  Injection pressure bar 1795  Stroke volume cm³ 3367  Shot weight at max. stroke for PS g 2391  Injection speed mm/s 110  Injection flow rate cm³/s 780  Screw drive / speed 1/min 147  Plasticizing flow rate (standard screw) 4) g/s 102  Nozzle system force kN 166 ELECTRICAL PARAMETERS  Installed heating power kW 54  Power supply V / Hz 400 / 50 WEIGHT AND DIMENSIONS  Net weight with control cabinet t 50.5  Length x width x height m 10.86 x 3.40 x 2.64 ADDITIONAL EQUIPMENT  Enlarged mold opening width  Core pull hydraulic 3+1  Core pull pneumatic 1+1  Air valves 1+1  Pneumatic cascade valve 3 +1  Hydraulic cascade 8  Water manifold 10  Euromap interfaces E18, E67, E77  Adaptive Process Control (APC+) The machine is located at our plant in Parsdorf and is available for short-term delivery. Further optional equipment can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 61037303, clamping force: 1,600 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,564 bar, injection weight: 432 g, mold height (min.): 500 mm, ejector force: 3,300 N, ejector stroke: 175 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 6,100 mm, total width: 1,710 mm, total height: 1,950 mm, overall weight: 8,400 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 520 mm, tool weight: 14,000 g, Injection molding machines directly from the manufacturer! As the manufacturer, KraussMaffei offers you our tested and versatile machines in stock: The fully electric PX series is the answer to your demands for greater flexibility combined with increasing productivity. Robust mechanics, highly precise and dynamic drive technologies, and intelligent energy management make the PX a reliable, productive, and efficient workhorse in any injection molding operation. An ergonomically optimized working height, maximum clearance under the mold, and excellent accessibility ensure maximum operator convenience. The PX series stands out due to its flexibility throughout its entire service life. TECHNICAL DATA: KM 160 / 750 PX G02 (Order 38621981) CONTROL  MC6 with 21.5" TFT color touchscreen and multi-touch function CLAMPING UNIT  Clamping force kN 1600  Mold opening force, max kN 240  Mold opening (h x v) mm 520 x 470  Platen size (h x v) mm 710 x 660  Mold height min. - max. mm 200 – 500  Opening stroke mm 850  Max. mold opening stroke mm 450  Ejector drive Hydraulic  Ejector stroke mm 175  Ejector force forward/backward kN 33 / 16  Ejector speed forward/backward mm/s 350 / 350  Max. mold weight kg 1400 INJECTION UNIT  Screw diameter / type mm 55 / Standard  Effective L/D ratio 21.3  Injection pressure bar 1564  Injection volume cm³ 475  Shot weight at max. stroke for PS g 432  Injection speed mm/s 125  Injection flow rate cm³/s 297  Screw drive / speed 1/min 267  Plasticizing rate (standard screw)4) g/s 75.8  Nozzle clamping force kN 42 ELECTRICAL PARAMETERS  Connected load kW 42  Installed heating power kW 18  Power supply V / Hz 415 / 50 WEIGHT AND DIMENSIONS  Net weight with control cabinet t 8.4  Length x width x height m 6.1 x 1.71 x 1.95 ADDITIONAL EQUIPMENT Nsdpfxs Afdato Abuewn  Increased mold opening  Hydraulic core pull 1+1 - way  Pneumatic core pull 1+1 - way  Air valves 1+1 - way  Pneumatic cascade 4 - way  Euromap interfaces E18, E67, E77  Adaptive Process Control (APC) The machine is located in our factory in Parsdorf and is available for immediate delivery. Additional options can be offered upon request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2017, operating hours: 15,635 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 26 mm, displacement volume: 57 cm³, tie bars: 370 x 320 mm Mould height min: 150 mm Opening stroke: 270 mm Injection weight: 52 g Screw: 26 mm Injection pressure: 2200 bar Auswerferkraft: 19,6 kN Njdpfx Ao Ad N Erobujwn

Condition: good (used), Year of construction: 2000, Arburg 420C-800-250 Clamping force: 80 tons Year of manufacture: 2000 Screw diameter: 40 mm Nsds Acb Tfopfx Abuown Injection volume: 188 cm3 Nozzle spacing: 42x42 Operating hours: 32,518

Condition: good (used), Year of construction: 2005, operating hours: 38,500 h, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 144 cm³, overall weight: 2,500 kg, Demag Ergotech 50-270 Extra Year of manufacture: 2005 Closing pressure: 50 tons Stroke: 30 mm Displacement: 144 cm³ Distance between tie bars: 35.5 x 35.5 Nwedpfx Abe Aa Afwouen

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161055, Used ENGEL injection molding machine Nwsdpj Aazd Sjfx Abujn Manufacturer: ENGEL Type: INSERT 330V/100 Year of manufacture: 2006 Machine No.: 161055 Weight: 9400 kg

Condition: used, Year of construction: 2000, Clamping unit 22 ton Max / Min Plate space 400 / 200 mm Screw: 22 mm Injection pressure 1732 bar Injection volume 30 ccm Shot weight: 27 g/PS Weight: 950 kg Nwedpfsz Sl H Rsx Abuen

Condition: used, Year of construction: 2008, Arburg 320C 500-100 (2008) Clamping force: 500 kN (50 tonnes) Clearance between tie bars: 320 × 320 mm Max. opening stroke: 350 mm Min. mold height: 200 mm Max. platen distance: 550 mm Ejector force / stroke: 30 kN / 125 mm Injection unit (Injection unit – type 100) Screw diameter: 25 mm standard Max. injection pressure: 2000 bar (with 25 mm screw) Max. injection volume: 49 cm³ (with 25 mm screw) Max. shot weight (PS): approx. 45 g Nozzle contact force: 50 kN Nedpez R N T Esfx Abujwn Weight and dimensions Machine weight: approx. 2,250 kg Oil capacity: approx. 165 l

Condition: ready for operation (used), Year of construction: 2006, operating hours: 30,949 h, clamping force: 800 kN, overall weight: 3,900 kg, This 3-axis Krauss Maffei KM 80-180 CX hydraulic injection moulding machine was manufactured in 2006. It has a machine weight of 3,900 kg and has completed over 4.6 million shots. The machine has been serviced annually by KraussMaffei and is decommissioned, making it immediately available. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 80-180 CX machine we have for sale. Contact us for further details. • Standard fully hydraulic 2-platen clamping and injection unit configuration • Maintenance: Serviced annually by KraussMaffei Nwedpfez Rxpbox Abuen

Condition: used, Year of construction: 2007, Arburg 320C 500-100 (2007) Clamping unit Clamping force: 500 kN (50 tonnes) Clearance between tie bars: 320 × 320 mm Max. opening stroke: 350 mm Min. mold height: 200 mm Max. platen distance: 550 mm Ejector force / stroke: 30 kN / 125 mm Nwedoz Nidgepfx Abuon Injection unit (Injection unit – type 100) Screw diameter: 25 mm standard Max. injection pressure: 2000 bar (with 25 mm screw) Max. injection volume: 49 cm³ (with 25 mm screw) Max. shot weight (PS): approx. 45 g Nozzle contact force: 50 kN Weight and dimensions Machine weight: approx. 2,250 kg Oil capacity: approx. 165 l

Condition: like new (used), Year of construction: 2019, clamping force: 500 kN, Equipment: documentation/manual, _ENGEL – Injection Moulding Machine Technical Data_ Serial number: 232665 Model: E‑VICTORY _Plasticising Unit 1_ • Screw diameter: 18 mm • Listed diameter options: 15 / 18 / 20 mm; 18 mm is installed • Screw stroke: 80 mm • Maximum injection volume: 20 cm³ • Screw speed: 450 rpm • Screw torque: 75 Nm • Plasticising rate, 3-zone screw: 4.2 g/s _Injection Unit 1_ • Version: Standard • Injection rate: 83.97 cm³/s • Specific injection pressure, regenerative mode: 2,400 bar _Nozzle 1_ • Nozzle stroke: 210 mm • Nozzle contact force: 40.6 kN _Material Cylinder 1_ • Screw L/D ratio: 24 Njdpjz Iyldjfx Abuswn • Heating zones, including nozzle: 4 • Heating power: 5.1 kW • Note: maximum available equipment _Clamping Unit_ • Clamping force: 500 kN (approximately 50 tonnes) • Opening stroke + cylinder tolerance: 408 mm • Maximum distance between platens: 600 mm • Minimum mould height: 200 mm • Platen dimensions, horizontal × vertical: 500 × 450 mm • Drop-out chute width: 400 mm • Maximum mould weight on moving platen: 300 kg • Maximum mould weight on stationary platen: 300 kg • Maximum total mould weight: 600 kg • Dry-cycle stroke according to Euromap 6: 150 mm • Dry-cycle time according to Euromap 6: 1.60 s Mould weight notes: 1. Mould overhang according to mounting platens. 2. Less the weight of any rotary table. _Ejector 1_ • Ejector stroke: 100 mm • Ejector force: 39.8 kN _Drive Unit_ • Oil reservoir capacity – injection unit, main tank: 135 l • Oil reservoir capacity – clamping unit, auxiliary tank: 0 l _Machine Basics_ • Total weight without oil: 4.0 tonnes • Total connected power: 65.0 kW Transcription note: the small footnotes below the plasticising section specify reference materials and test conditions. They are not fully legible in this photo.

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 Year of manufacture: 2004 Injection unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2470 bar Dosage volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Nwjdpez Iq Iisfx Abujn Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 Year of construction: 1999 Injection unit: Screw diameter: 35mm Injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Nwodpfxoz Iq Hfe Abujn Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - clean production conditions Euromap 12 Robot interface Core pull control Hardened injection unit - bimetal Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Nsdpfoz Iq E Uex Abuewn Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 with the sprue picker anvil+long leg Year of construction: 1999 Injection unit: Screw diameter: 40 mm Injection weight: 158 g Injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit : Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Nedpfjz Iq Enox Abuswn Euromap 12 Robot interface Control system with air valve Core pull control Hardened injection unit - bimetal Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2001, Arburg 320K 700-100 Year of construction: 2001 Injection unit: Screw diameter: 30 mm Injection weight: 59 g Injection pressure: 1550 bar Dosing volume: 70 ccm Clamping unit : Clamping force: 70 t Distance between tie bars: 320x320 mm Size of the clamping platens: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control system: SELOGICA Additional equipment: Hydraulic core pull x 1 Hardened injection unit - bimetal Central lubrication Original Arburg mold crane, 2 lifting speeds, lifting capacity 100 kg Nsdpfx Aez Iq Dksbujwn Dimensions: Weight: 2170 kg Length/width/height: 2.94x1.45x1.99 m Drive: Pump/motor: 11 kW Heating output: 4.9 kW Total output: 15.9 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, Arburg 320K 700-250 with the side robot Arburg Multilift H Year of manufacture: 2005 injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit : clamping force: 70 t tie bar distance: 320x320 mm size of clamping platens: 476x476 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Air valve x 3 Control with hot runners injection unit hardened - bimetal Central lubrication Dimensions: Weight: 2350 kg length/width/height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,1 kW Total power: 21,1 kW Nodpfx Asz Iq Ddsbuewn All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2009, Arburg 370S 700-100/100 / 2K machine / operating hours: 33.544 in automatic mode / very good technical condition Year of manufacture: 2009 injection unit: Screw diameter: 30 mm injection weight: 65 g Injection pressure: 1390 bar Metering volume: 71 ccm Clamping unit: clamping force: 70 t tie bar distance: 370x370 mm size of clamping platens: 510x510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: 2K machine Operating hours: 33.544 in automatic mode Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 2 Control with hot runners Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Parallel movements The vertical injection unit - screw diameter fi 20 mm (29 g/hp) Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) Machine with the built-in conveyor belt Arburg and original sorting flap There is a possibility to buy an original Weber turntable It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer Dimensions: Weight: 4440 kg Length/width/height: 3.48x1.58x2.97 m Nwodpfxez Iq A Tj Abuen Drive: Pumps/motor: 15 kW Heating power: 4,9 kW Total power: 19,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2001, Arburg 320C 600-250 / machine in very good technical condition Year of manufacture: 2001 injection unit: Screw diameter: 35 mm Nwjdez Iq Agspfx Abujn injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 60 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Core pull control Injection unit hardened - bimetal Built-in sorting flap Dimensions: Weight: 2330 kg Length/width/height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Arburg 370S 600-70 Year of manufacture: 2008 Injection Unit: Screw diameter: 25 mm Shot weight: 40 g Injection pressure: 1,550 bar Metering volume: 44 cm³ Clamping Unit: Nwodoz Iqz Nepfx Abusn Clamping force: 60 t Tie bar spacing: 370 x 370 mm Platen size: 510 x 510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: - Euromap 67 - Robot interface - 8x air valves - 1x hydraulic core pull - Controller for hot runner (6 zones) - Injection unit: hardened, bimetallic - Integrated sorting flap - Integrated original Arburg side gate picker - Option to set up vertical injection unit using special brackets - Screw diameter can be changed to 22, 25, or 30 mm Dimensions: Weight: 3,160 kg Length/Width/Height: 3.48 x 1.46 x 2.03 m All machines offered are started and tested by our technicians prior to sale. A video of the technical tests for the selected machine can be provided, or live technical tests can be attended at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2014, Arburg 320C 500-170 e² / Hybrid Machine Year of manufacture: 2014 Injection Unit: Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Dosing volume: 85 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Operating hours: 48,000 h in automatic mode Air valve x 2 Core pull control Controller with 8 hot runner zones Injection unit hardened - bimetallic Main motor of the machine: servo motor with inverter – energy-saving Proportional valve on the injection unit – for precise injection Dimensions: Weight: 2210 kg Length/Width/Height: 3.41x1.43x1.99 m Nwedpez Iqzvjfx Abuon All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request