Beyazli Group

Condition: excellent (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: F210118, warranty duration: 12 months, compressed air connection: 6 bar, year of last overhaul: 2026,

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Laminated glass cutting line with low-e deletion Maximum laminated glass cutting length: 4600 mm Maximum laminated glass thickness: 8 + 4.56 PVB + 8 mm Tilting loading table with belts 100 BLC-J is included More technical information and layout can be found attached as Tech. data file Very good and clean condition Kdjdpoz Dv U Hofx Aqiet Good working order As is Available immediately

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m Kdedpfoz Dv Uyjx Aqiot - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: excellent (used), functionality: fully functional, Maximum working height: 20 cm Maximum working width: 25 cm Electrically driven rollers Smoothly adjustable roller speed Kedpfxjz Dv Ugo Aqisdt

Condition: ready for operation (used), Year of construction: 2005, with feed-right machine Kdodpfoz Dv Uaex Aqist with winding device

Condition: used, Year of construction: 2006, MORI SEIKI NV-5000 α 1A/40 4-AXIS MACHINING CENTER YEAR 2006 MODEL NV-5000α1A/40 CNC MSX-501 (MAPPS-M conversational) FEATURES 1. WORK AREA AND TRAVEL • X-axis travel: 800 mm • Y-axis travel: 510 mm • Z-axis travel: 510 mm • Distance between table surface and spindle nose: 150 - 660 mm 2. TABLE • Table size: 1,100 x 600 mm • Maximum load capacity: 1,000 kg • Configuration: 6 x 18 mm T-slots 3. SPINDLE • Spindle speed: 14,000 rpm • Spindle mount: MAS BT-40 (7/24 Taper No. 40) • Bearing inner diameter: 65 mm • Motor power (30 min/duty): 22 / 18.5 kW • Cooling: Chiller for spindle cooling included 4. FEED RATES AND ACCURACY • Rapid traverse rates: 42,000 mm/min • Jog feed rate: 0 - 1,260 mm/min • Positioning accuracy: 0.005 mm (over the entire travel) • Positioning repeatability: ± 0.001 mm 5. AUTOMATIC TOOL CHANGER (ATC) • Tool magazine capacity: 30 positions • Tool holder type: MAS BT-40 (90° pull stud) • Maximum tool diameter: 80 mm (125 mm with adjacent positions empty) • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Tool change time (chip-to-chip): 2.6 seconds (1.0 s from tool to tool) 6. CNC FEATURES (Mori Seiki MSX-501) • Monitor: 10.4" TFT color active matrix • Program memory: 320 m (63 programs can be stored) • Main functions: o LOOK-AHEAD (G08) for high-speed 2D profile control Ksdpfxoz Dv T Nj Aqiodt o Synchronous tapping (Rigid Tapping) o Helical interpolation o Load Monitor (cutting force management) o RS-232-C and PCMCIA interface standard 7. DIMENSIONS, WEIGHTS AND CONSUMPTIONS • Machine height: 2,603 mm • Installation area: 2,788 x 2,710 mm • Machine weight: 6,960 kg • Installed electrical power: 50.5 kVA • Coolant tank capacity: 275 liters 8. EQUIPMENT AND INCLUDED ACCESSORIES • Chip conveyor: Left-side conveyor • Coolant system: Coolant interface through the spindle (Type-B) with additional high-pressure pump (50 Atm) and dual filter • Cleaning system: Pneumatic • Signaling: Light and sound indicator for cycle end • Transformer: Included (380V/50Hz > 200V/60Hz) Machine complete with manuals, test certificates and CE declaration All technical data provided is indicative and may be subject to change without prior notice and therefore should not be considered binding.

Condition: used, Year of construction: 2007, Machine No. 78, control system, manufacturer Boschert, tool quick-change system, manufacturer Trumpf, punching force: 3 x 280 kN, station 1 Trumpf system tool size 3 (105 mm) with spray device, station 2 Trumpf system tool size 3 (105 mm), freely indexable rotation, station 3 Trumpf system tool/Boschert Revotool size 3 (105 mm), including Revotool 8-position tool holder, travel distances X – 3,000 mm (adjustable up to 9,999 mm), Y – 1,580 mm, punching arm overhang 1,730 mm, sheet thickness max.: 6 mm (clamp opening), stroke height max.: 90 mm, programmable in increments upwards and downwards, punching slug extraction, ball bearings in the machine table Table width left + right: 3,200 mm each, table depth: 2,810 mm, table height: 900 mm, overall width: 6,482 mm, overall depth: 4,600 mm, overall height: 2,110 mm; with workshop cart, manufacturer KS Tools, 7 drawers, contents: various hand tools. Kjdpfx Aqjz Dv Tvoisdt

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, table load: 400 kg, spindle speed (max.): 12,000 rpm, tool weight: 10,000 g, number of axes: 3, This 3-axis Matsuura H.Plus 405 was manufactured in 2005. It features a pallet working surface of 500 x 500 mm and a maximum load capacity of 400 kg. The machine offers an impressive X, Y, and Z-axis travel of 600 mm each, along with a spindle speed range of 40 - 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Matsuura H.Plus 405 horizontal machining centre we have for sale. Contact us for further details. Kdjdpfxoz Dv Tps Aqiet • Pallet working surface: 500 x 500 mm • Max. workpiece size: Ø 650 x 750 mm • Spindle bearing inner diameter: 80 mm • Number of tool slots: 51 • Max. tool diameter: 90 mm • Max. tool length: 350 mm • Rapid traverse rate: 50 m/min

Condition: excellent (used), functionality: fully functional, power: 47.81 kW (65.00 HP), fuel type: diesel, color: orange, gearing type: hydrostat, Year of construction: 2019, operating hours: 348 h, Equipment: air conditioning, all wheel drive, HOLDER C65 SC Municipal utility vehicle with winter service equipment Accessories: 1. KUGELMANN VS-150/74 Vario wedge snowplow with a maximum clearing width of 150 cm 2. KUGELMANN 550l spreading system with control panel This HOLDER C65SC utility vehicle was first put into operation in 2019, has only 348 operating hours according to the meter, and is in well-maintained overall condition with the usual signs of wear and tear for this class of equipment. Recent service performed. - Net price: €58,739 // Gross price: €69,900 Kodpjz Dv Tijfx Aqisdt - Inspection / test drive is possible at any time - Shipping can be arranged nationwide, the costs depend on the distance! - We will gladly have our leasing partner prepare an attractive leasing/financing offer for you!

Condition: new, operating pressure: 275 bar, overall weight: 71 kg, PROFESSIONAL PETROL PRESSURE WASHER WITH BRASS PUMP – TECHKAR "G275" MODEL Operating parameters: 275 bar, 15 l/min Product Description: We offer a professional petrol-powered pressure washer featuring a robust yet compact design and large pneumatic tires, ensuring convenient, efficient, and safe transport to locations where standard electric washers cannot be used. Thanks to its petrol engine and a pump capable of self-priming water from tanks, this unit operates independently of mains electricity and water supplies. It is ideally suited for various outdoor tasks, such as work on allotment gardens. High performance specifications—specifically a maximum pressure of 275 bar and a flow rate of 15 l/min—enable it to handle the vast majority of tasks required of pressure washers. Utilizing standard fittings (M22 thread and standard petrol washer quick-connectors), the unit can be expanded with a wide range of accessories, including brushes, lances, turbo nozzles, sandblasting kits, sludge removers, and T-Racer surface cleaners. The brass pump, equipped with a pressure regulation valve and a safety valve, ensures exceptional durability even under heavy workloads. We are the direct importer of TECHKAR "G275" pressure washers and maintain a continuous stock of service parts (pressure valves, pistons, seals, by-pass valve repair kits) and accessories (such as T-Racer patio cleaners, rotary nozzles, hoses, foam cannons, etc.). When you choose our product, you benefit from comprehensive service and post-warranty support. About the LIFAN brand: Lifan is one of the world's largest automotive companies. The enterprise manufactures motorcycles, passenger cars, trucks, and buses, as well as internal combustion engines and machinery. Founded in 1992, the company is headquartered in Chongqing. It successfully sells its products in highly developed nations—such as the UK, Germany, Russia, Australia, the USA, and Canada—where it enjoys an excellent reputation. Set contents: LIFAN 15 HP combustion engine Brass pump head 15m steel-braided hose with 3/8" quick-connectors High-pressure gun with 3/8" quick-connector Spray lance with quick-connector 0° point-jet nozzle 15° fan-jet nozzle 40° fan-jet nozzle Chemical application nozzle Garden hose quick-connector with metal pre-filter Honda oil supply (2 x 0.6L) Features and benefits: Brass pump head Crankshaft pump, 3-piston design Ceramic plungers Robust intake and discharge valves Thermal safety valve Chemical intake valve with hose and filter Additional BY-PASS pressure regulation valve Water connection for standard garden hose coupling Cover with oil drain opening Cover with built-in oil level sight glass Large pneumatic wheels Sturdy frame Technical specifications: Engine: LIFAN 15 HP combustion engine Starting system: Manual (recoil) Fuel consumption: ≤ 374 g/kWh Fuel tank: 6.5L Fuel type: Gasoline Pump head type: Brass, crankshaft-driven Intake/discharge pump: Yes Working pressure: 275 bar (4000 PSI) Maximum pressure: 300 bar (4400 PSI) Flow rate: 15 l/min (900 l/h) Weight: 71 kg Engine oil: SAE 10W30 Pump oil: SAE 15W40 Condition – new Kdodpoz Dv Tcefx Aqiot

Condition: used, Year of construction: 2008, operating hours: 48,899 h, HARDINGE BRIDGEPORT XR 1600 MACHINING CENTER YEAR: 2008 MANUFACTURER: HARDINGE TAIWAN PRECISION MACHINERY LDT MODEL: XR 1600 CNC: HEIDENHAIN iTCN 530 Features Axis Travels: X-axis: 1600 mm Y-axis: 700 mm Z-axis: 610 mm Rapid Traverse Rates (X/Y/Z): Up to 36 m/min Table: Dimensions: 1700 mm x 700 mm Maximum Load Capacity: 1500 kg Spindle and Tool Holder: Spindle Taper / Tool Holder: ISO 40 (BT40/DIN standard) Spindle Speed: 12,000 rpm Motor Power: 22 kW / 30 HP Automatic Tool Changer (ATC): Capacity: 24 positions Type: Swing arm type. Kedpfx Aqez Dv S Soiodt Machine comes with manuals and CE declaration of conformity. All technical data provided is indicative and may be subject to change without prior notice, and therefore should not be considered binding.

Year of construction: 1998, condition: used, Tool travel: 250 mm Distance between column and tool holder: 425 mm Distance between table and column top: 520 mm Saddle travel: 430 mm Table dimensions: 340 x 560 mm Table travel: 350 mm Number of strokes: 16-60 Kjdoz Dv Slopfx Aqiodt AUTOMATIC RETURN

Condition: used, mileage: 803,700 km, power: 324 kW (440.52 HP), first registration: 05/2015, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 6x2, wheelbase: 3,950 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,680 mm, total width: 2,550 mm, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fridge, parking heater, spoiler, = Additional Options and Accessories = - 6x2 - Aluminum fuel tank - Roof spoiler - Digital tachograph - Lift axle - Air suspension - Radio/CD player - Sleeper cab - Sun visor = Additional Information = Kdodoz Dv R Uopfx Aqiot Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Axle Configuration Front axle: Tire size: 385/65 R 22.5; Steerable; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/70 R 22.5; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/70 R 22.5; Dual tires; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 8,553 kg Payload: 18,447 kg GVW: 27,000 kg Condition Damage: none Identification License plate: 76-BFS-8

Condition: used, mileage: 820,806 km, power: 345 kW (469.07 HP), first registration: 05/2018, fuel type: diesel, empty load weight: 10,450 kg, maximum load weight: 15,550 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, differential lock, onboard computer, power assisted steering, seat heater, spoiler, trailer coupling, * German vehicle * 1st owner * Condition: see photos * SDG Hub Multi Changer * Suitable for all BDF containers * Globetrotter Comfort cab * 1 bed * Automatic climate control * Refrigerator * 2x air-suspended comfort seats * Seat heating * Lane keeping assist system * Emergency braking assist * Cruise control * Distance control assist Kedoz Dv R Ispfx Aqiodt * Hill start assist * TCS Road * Auxiliary heater * Large fuel tank * Bluetooth phone * CB radio * Stereo CD * Electric windows * Electric, heated mirrors * Air horns * Auxiliary headlights * Chrome light bar * Full spoiler * All-round lights * Trailer coupling * Trailer load 18,000 kg * Gross vehicle weight 44,000 kg * Storage compartment * Air suspension front and rear * Liftable trailing axle * Differential lock * Wheelbase 4.90 + 1.40 m * GVWR 26,000 kg * Unladen weight 10,450 kg * Payload 15,550 kg If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods so that the buyer does not have any false ideas about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: excellent (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: F2101147, warranty duration: 12 months, air pressure: 6 bar, year of last overhaul: 2026, Equipment: documentation/manual, F1000 AUTOMATIC CARTON ERECTOR CARTON DIMENSIONS: - Length: min. 180 mm - max. 400 mm - Width: min. 100 mm - max. 400 mm - Height: min. 100 mm - max. 500 mm TECHNICAL DATA: - Siemens S71200 PLC control - Performance: 840 cartons/min (depending on length and quality of the cartons) - Carton magazine: 110 cartons - Control panel: HMI digital, Kite model 7'' - Automatic start/stop via photocell - Venturi vacuum system: 25 m3/h, 700 mm HG - Mains voltage 400V, 3-phase, N, PE - 50/60 Hz - Protection rating IP 54 - Compressed air 6 bar - Air consumption 22 l/min - Operating environment +5° C - max. +35° C - Working height 650 mm, adjustable by +30 mm - Weight 490 kg - Machine dimensions incl. sealer, in mm (l x w x h): 2,206 x 2,160 x 2,210 - CE safety protection The system includes a GEM B52 carton sealer. GEM B50 CARTON SEALER WITH SIDE DRIVE BELTS FOR CONSISTENT CARTON FORMAT CARTON DIMENSIONS: - Length: min. 150 mm - max. ∞ - Width: min. 100 mm - max. 520 mm - Height: min. 100 mm - max. 520 mm TECHNICAL DATA: - Drive & guide belts, vertical - Carton format adjustment: manual Kdjdpfjz Dv Rusx Aqiet - Sealing unit: bottom - Standard version T22 / T23 - Adhesive tape width: from 38 to 50 mm, depending on the unit - Tension adjustable - Max. adhesive roll diameter: 360 mm - Adhesive tape roll core: 76 mm - Mains voltage 400V, 3-phase, N, PE - 50/60 Hz - Consumption: 0.25 kW - Protection rating IP 54 - Operating environment +5° C - max. +35° C - Transport speed: 22 m/min - Average production: 1000 cartons/hour - Working height: 650 mm - Weight: 85 kg - Dimensions of erector incl. sealer, in mm (l x w x h): 2,206 x 2,160 x 2,210 - CE safety protection: side sheet metal covers with access door, upper and lower covers (mandatory when combined with F1000/F2000/F2008) The illustration may include optional extras that incur additional costs.

Condition: good (used), Year of construction: 1983, Sheet metal width: 6200 mm Ksdpfx Ajz Dv Rhoqiedt Sheet metal thickness: 8 mm Overhang: 60 mm Stand spacing: 6400 mm Cutting angle adjustment: 0.5 to 2° Total power requirement: 13 kW Machine weight (approx.): 19 t

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Kedpfxoz Dv N De Aqiodt Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf

Condition: new, Year of construction: 2026, functionality: fully functional, Screen Conveyor BELT CONVEYOR – 600mm/800mm/1000mm/1200mm/ WIDTH with ANY LENGTH Kdodpfx Aez Dv Nwsqiet 600 mm - 800 MM - 1000MM -1200MM CONVEYORS FROM FABO COMPANY • High quality Polat brand reductor • Drive drums are rubber coated and threaded. • Belts are EP 125, 4 layers’ double stick 10mm thickness • Conveyor belt system was protected with emergency stop • All motors are GAMAK or equivalent brand • A side scraper system is available to prevent spillage of the final product into the stock area during crushing • The gear units are 3 transmission type and the new generation is with torque connection system • Long life rollers FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 1983, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm Kedpfx Aqjz Dv Nqeiodt

Condition: new, Year of construction: 2026, functionality: fully functional, Screen Conveyor BELT CONVEYOR – 600mm/800mm/1000mm/1200mm/ WIDTH with ANY LENGTH 600 mm - 800 MM - 1000MM -1200MM CONVEYORS FROM FABO COMPANY • High quality Polat brand reductor • Drive drums are rubber coated and threaded. • Belts are EP 125, 4 layers’ double stick 10mm thickness • Conveyor belt system was protected with emergency stop • All motors are GAMAK or equivalent brand • A side scraper system is available to prevent spillage of the final product into the stock area during crushing • The gear units are 3 transmission type and the new generation is with torque connection system • Long life rollers FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!! Kjdpfez Dv Nkox Aqisdt

Condition: ready for operation (used), Year of construction: 2015, operating hours: 13,747 h, machine/vehicle number: 00820000561, CNC turning machine DMG Mori CTX beta 800 TC, No. 00820000561, year of manufacture 2015, 24,796 operating hours, 13,747 load hours. Including: - DMG Mori control system - Oil leak on the Ergoline pump housing - Chip conveyor - Machine cooling system - Lubricant filter system Kdjdpfx Ajz Dv Ndeqist - Material loader ILS MUK 7012-III, Machine no. 74101508, year of manufacture 04/2016 The machine can be purchased via an online auction on our website. You can access the website by clicking on the link in the advertisement. Auction closing date: October 8, 2026, 6:00 PM.

Condition: ready for operation (used), Year of construction: 2005, number of axes: 4, This 4-axis INGERSOLL Gantry 400 was manufactured in 2005. It features a main voltage of 400 V and operates at a frequency of 50 Hz. The machine is equipped with a Multipulse64 control system, ensuring precision in die-sinking applications. If you are looking to get high-quality die-sinking capabilities, consider the INGERSOLL Gantry 400 machine we have for sale. Contact us for further details. • Control system: Multipulse64 • Electrical specifications: • Main/operating voltage: 400 V (3-phase) • Frequency: 50 Hz • Control voltage: AC / 24 V DC Kdjdpfxjz Dv I Te Aqiot • Current consumption/power input: 15 A • Max. backup fuse: 25 A

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, feed length W-axis: 1,600 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Ksdjz Dv Imjpfx Aqisdt Total power requirement 83 kW Additional information incl. 15 plates

Condition: ready for operation (used), This used Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty racking solution for industrial storage requirements. The modular high-bay racking is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy loading units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 3,080 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam colour: yellow painted - Uprights: approx. 400 x 105 cm, pre-assembled - Upright colour: blue painted - Levels: Floor + 2 - Pallet spaces: 99 including floor positions - Version: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 12 x Uprights (approx. 400 x 105 cm), pre-assembled - 44 x Beams (approx. 270 cm) - 88 x Safety pins Price: €2,200 net €2,618 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner carriers – freight costs depending on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding quote – tailored to your specific requirements. Whether new construction, conversion, or expansion – we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit us in our showroom! On site, you can get an in-depth look at our pallet racking, shelving systems, and other storage solutions. Many systems are assembled and ready for demonstration. Our specialist advisors are available to answer your questions and provide individual consultation – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! Kjdpfxoz Dv Igs Aqiodt INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am to 4:00 pm. Alternatively, send us a message with your name and number, and we will get in touch with you as soon as possible.

Condition: ready for operation (used), This used Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty racking solution for industrial storage requirements. The modular high-bay racking is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for the storage of Euro pallets and heavy loading units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 3,080 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam colour: yellow painted - Uprights: approx. 400 x 105 cm, pre-assembled - Upright colour: blue painted - Levels: Floor + 2 - Pallet spaces: 99 including floor positions - Version: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 12 x Uprights (approx. 400 x 105 cm), pre-assembled - 44 x Beams (approx. 270 cm) Kodpez Dv Iaefx Aqijdt - 88 x Safety pins Price: €2,200 net €2,618 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner carriers – freight costs depending on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding quote – tailored to your specific requirements. Whether new construction, conversion, or expansion – we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit us in our showroom! On site, you can get an in-depth look at our pallet racking, shelving systems, and other storage solutions. Many systems are assembled and ready for demonstration. Our specialist advisors are available to answer your questions and provide individual consultation – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am to 4:00 pm. Alternatively, send us a message with your name and number, and we will get in touch with you as soon as possible.