TBI Technology Sp. z o.o.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Fedpfjxvw Rpex Adaspp Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing Fjdpfx Aexvw Nlsdaspp The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,600 h, functionality: fully functional, machine/vehicle number: MJ1-1139, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 0i-MF PLUS, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 900 mm Y-axis travel: 800 mm Z-axis travel: 710 mm Max. spindle speed: 6,000 rpm MACHINE DETAILS Control: Fanuc 0i-MF PLUS Coolant supply: 46 bar Total weight: 17,000 kg Fpodpfx Aoxt E Ahjdaep Spindle operating hours: 1,600 h EQUIPMENT Chip conveyor Table shower system (Grundfos SPK4-8) TSC cooling system with Grundfos MTR3-36/CRK2-260, 46 bar/60 Hz Mahle filter Renishaw NC-4 laser tool measurement system RMP-60 spindle probe

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm Fpodpfxextfz Do Adaop z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 17000 kg Control Unit Brand FANUC Model Series 16i-MB Fpsdpfxsxrhc Is Adajp Main Drive Number of spindles 26kW Spindle speed range 8000 rpm Tool taper NST No. 50 Number of axis 4 Movement X-Axis Movement 870mm Y-Axis Movement 1020mm Z-Axis Movement 950mm Table Table load 800kg Tools Max weight 25kg Max tool diameter 125 mm Max tool length 400mm Type of tool holder MAS BT50 / CAT50 Media Chip conveyor Yes This 4-axis Kitamura Mycenter-HX500iTGA was manufactured in 2011. It features a robust 500x500mm table, capable of handling workpieces up to 800x1000mm and 800kg. With X/Y/Z travels of 870mm, 1020mm, and 950mm respectively, and a high-pressure coolant system, it's ideal for demanding machining tasks. The machine includes a 50-tool storage capacity, automatic pallet changer, and is driven by a powerful 26kW spindle motor. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1999, Make: DECKEL MAHO Type of machine: DMC 80 H / RS4 Year of manufacture: 1999 Control system: Siemens 840 D Fsdexni Uqjpfx Adajpp Machine's weight: 18,5 t Tool holder: SK 50 x-travel: 800 mm y-travel: 710 mm z-travel: 710 mm Speed range: 10.000 1/min Overall dimensions: 9,0 x 5,0 x 3,0 m Table dimensions: 400 x 500 mm Number of tools in the magazine: 180 (2x 90) pos Internal coolant supply: 40 Bar : x

Condition: ready for operation (used), Year of construction: 1999, Make: DECKEL MAHO Type of machine: DMC 80 H / RS4 Year of manufacture: 1999 Fodexni T Tjpfx Adajpp Control system: Siemens 840 D Machine's weight: 18,5 t Tool holder: SK 50 x-travel: 800 mm y-travel: 710 mm z-travel: 710 mm Speed range: 10.000 1/min Overall dimensions: 9,0 x 5,0 x 3,0 m Table dimensions: 400 x 500 mm Number of tools in the magazine: 180 (2x 90) pos Internal coolant supply: 40 Bar : x

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, machine/vehicle number: 61612677, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Siemens Sinumerik, overall weight: 10,000 kg, No reserve price – sale guaranteed to the highest bidder! The payment deadline is one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL DETAILS Travel range X-axis: 850 mm Travel range Y-axis: 500 mm Travel range Z-axis: 500 mm Control unit: Siemens Sinumerik MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,500 x 4,000 x 2,500 mm Total weight: 10,000 kg Fsdpfx Ajxm Ucdodaopp EQUIPMENT NC rotary table Documentation Note: The clamping tower on the pallet table is not included in the scope of delivery.

Condition: used, Year of construction: 2011, x-travel 800 mm y-travel 800 mm z-travel 800 mm Control Siemens 840 D turning speeds 18.000 U/min no. of tables 2 table dimensions 500 x 650 mm number of tool places 120 Pos. tool taper HSK 63 In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features & accessories: - Fully protected cabin with sliding doors and interior lighting - Setup room - Tool measurement in the work area BLUM laser - 3 D measuring probe - Operating mode 3 + 4 - IKZ 40 bar with 600 l tank and paper belt filter - Chip flushing gun with pump 1 bar/40 l - Chip conveyor - Brankamp monitoring - Signal light 3 – colored - Coolant ring nozzle - Blow air cooling device - Coolant device - Oil/emulsion mist separation system - Control cabinet cooling device Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Fpjdpfjxmk E Ijx Adajp Changes and errors in the technical data and information as well as prior sale reserved!

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 5584 mm Machine weight 16000 kg Measurements height 3342 mm Measurements depth 3693 mm Control Unit Brand FANUC Main Drive Number of axis 4 Tool taper BT 50 Spindle Speed 10000 RPM Movement X-Axis Movement 900 mm Z-Axis Movement 1020 mm Y-Axis Movement 800 mm Tools Number of index 40 or 60 Max tool diameter 115 mm Max tool length 600 mm Fsdpfx Aoxl H A Todaopp Max weight 30 kg This 4-axis Makino a81 horizontal machining center was manufactured in 2011. It features a robust 630×630 mm pallet, capable of handling a maximum load of 1200 kg, and a spindle speed range of 20−10000 min−1. The machine offers a rapid traverse rate of 50000 mm/min, enhancing productivity. Ideal for complex machining tasks, consider the opportunity to buy this Makino a81 horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, nominal power (apparent): 61 kVA, controller manufacturer: Mazatrol, controller model: 640M, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 900 mm, workpiece weight (max.): 1,000 kg, total height: 3,200 mm, total length: 6,100 mm, total width: 3,500 mm, table width: 500 mm, table length: 500 mm, overall weight: 18,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 7,000 rpm, spindle motor power: 26,000 W, Equipment: chip conveyor, Dear Sir or Madam, we are offering you a used CNC horizontal machining center "MAZAK" in good condition. Please refer to the attached file for details. Fsdpfxjxf T Txo Adaopp

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,510 h, functionality: fully functional, machine/vehicle number: 11670000823, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 180, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Drive: Variable-speed asynchronous motor with liquid cooling Control: Sinumerik 840D powerline Work spindle Tool holder: HSK-A63, hydraulic-mechanical tool clamping Spindle speed: 0 – 10,000 rpm, continuously programmable Feed Drive: AC brake motors on the X, Y, Z, and B axes Feed range on the X, Y, and Z axes: 0 – 60,000 mm/min Rapid traverse on the X, Y, and Z axes: 80 m/min Measuring system Resolution on the X, Y, and Z axes: 0.001 mm Position tolerance on the X, Y, and Z-axis: 0.008 mm Pallet Number: 2 Size: 630 × 630 mm Hole pattern: 108 × bushing Ø 16.02 H6 Centering bushing: Ø 16.02 H6, 38.5 mm deep NC rotary table Max. tabletop rotation: 30 rpm Tabletop holding torque at 40% duty cycle: 5,000 Nm Tabletop holding torque at 100% duty cycle: 3,250 Nm Workpiece weight Per pallet: max. 800 kg Difference with different loads: max. 800 kg Tool magazine Type: Vertical chain magazine HSK-A63 Positions: 180 Tool changing system: Double gripper Max. tool diameter standard: 80 mm Max. tool diameter with free adjacent positions: 160 mm Max. Tool length from spindle nose: 550 mm Max. tool weight: 12 kg Max. magazine load: 630 kg MACHINE DETAILS Space requirement: 6.0 x 6.0 m Height: 3.2 m Weight: 18 t Power requirement: 71 kVA Machine dimensions: approx. 4.7 x 5.6 x 3.2 m EQUIPMENT - Internal coolant supply - Chip conveyor - Belt filter system - Cooling unit Fedpfx Aoxf Htxjdaspp - Rotoclear - Tool breakage detection (laser) - Mist separator - Measuring probe - Handheld control unit - Flushing gun - Blow-air cooling system - 4-color signal lamp - Dynamic package

Condition: ready for operation (used), Year of construction: 2009, operating hours: 21,927 h, Control Unit Brand FANUC Model Series 21i-MB General Data Measurements width 2770 mm Measurements depth 4950 mm Measurements height 2804 mm Machine weight 15000 Main Drive Spindle speed range 8000-12000 Spindle motor power 22 kW Number of axis 4 Movement X-Axis Movement 850 mm Y-Axis Movement 700 mm Z-Axis Movement 750 mm Workpiece Workpiece weight 500 kg Table Outer length 500 mm Outer width 500 mm Fpodpfx Adexfwxlsaep Tools Max weight 8 kg Max tool diameter 40 mm Max tool length 400 mm This HYUNDAI KIA HS500i Horizontal Machining center was manufactured in 2008. The 4 axis machine has a total of 21927 working hours. It operates through a FANUC Series 21i-MB control unit. The machine reaches a 12000 rpm spindle speed. It is in good technical condition, has full documentation and is ready for testing. Application Types Milling

Condition: used, Year of construction: 2018, Heller HF3500 Base Machine HF 3500 APC Equipment Package POWER NC Swivel Rotary Table for 5-Axis Machining with Tilted Rotary Axes Travel Paths X710/Y750/Z710 Plane Transformation (CYCLE800) Tool Extraction Execution in accordance with EC Machinery Directive with Declaration of Conformity and CE Marking Precision Water-Air Cooling Unit (Compressor cooler for cooling the direct drives of A- and B-axes as well as for spindle and control cabinet cooling) HSK-A 63 Tool Holder according to DIN 69 893 Standard control panel at the tool setup station (chain) Workpiece setup station, pallet manually rotatable and lockable in 90° increments (cannot rotate freely with media interface) Workpiece clamping mechanical Two pallets as zero-point clamping systems with DIN hole pattern in base machine Scraper belt conveyor for wet machining Main control console in desk design with 24" screen with multitouch function and “HELLER Operation Interface” Equipment/Accessories PC 63 i Power Cutting Unit (12,000 rpm, 45 kW, 228 Nm) Receiver for wireless probe, make RENISHAW (incl. HELLER measuring cycles only with Siemens) Wireless probe with tool holder and probe insert, make RENISHAW RMP 60 Tool magazine with 80 places, chain version Fast drill breakage detection Comfort control terminal at tool setup station (chain) Enforced-Drive in A – Reinforced torque drive for the A-axis (for simultaneous 5-axis machining) Coolant purification system, paper band filter TMF600, ICS 70 bar with frequency-controlled high-pressure pump, work area rinsing Coolant chiller (water-air / type: compressor) Extraction system for emulsion Door window air blow device for work area door Siemens SINUMERIK ONE Process-integrated tool monitoring (IPM) LED status light red - yellow - green Technology package milling (ONE Dynamics 5 axes) Collision avoidance strategy AutoCal (Automatic Calibration) Handheld control device SINUMERIK HT 2, make Siemens Interface for handheld control device Extension package Standard-MF-II PC keyboard for main control console Fedpfxoxck I Uo Adaepp Extension to 4 pallets Additional equipment not included in the purchase price (available separately) Hyper Mill post-processor 3D machine model STP

Condition: used, Year of construction: 2015, Control Siemens In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Fsdpfx Asxb Egvedaopp Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2002, Technical details are shown on picture. Parts shown on pictures not come. Fpjdpfow U Alqjx Adajp

Condition: good (used), Year of construction: 2013, Traverses X Y Z; 813 x 508 x 711mm, Pallet size 500 x 500mm, number of pallets 2 , Maximum workpiece weight 300 Kgs, Fpjdpfx Asw S T R Sedaep spindle power 40Hp, spindle speed 8,000 rpm, 70 station ATC, spindle taper BT40, Through spindle coolant, swarf conveyor, WIPS.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 950 mm, travel distance Y-axis: 720 mm, travel distance Z-axis: 760 mm, table width: 630 mm, table length: 630 mm, TECHNICAL DETAILS Travel distances X-axis travel: 950 mm Y-axis travel: 720 mm Z-axis travel: 760 mm Spindle Spindle speed range: 12,000 rpm Work table Table outer length: 630 mm Table outer width: 630 mm MACHINE DETAILS Control: Fanuc Series 16I-M Dimensions Machine width: 3,200 mm Machine height: 3,200 mm Fpodpfx Aew Nwupodajp

Condition: good (used), Year of construction: 2020, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 2630081, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 120 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, torque: 80 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840 D SL Solution Line mit NCU 730, workpiece diameter (max.): 1,830 mm, workpiece weight (max.): 800 kg, total height: 3,500 mm, total length: 5,900 mm, total width: 3,990 mm, overall weight: 24,500 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 17,500 rpm, operating hours of spindle: 8,000 h, Equipment: chip conveyor, Horizontal double swivel-beam machining center with 2 spindles - Linear and torque motors in the feed axes - Gantry drive for the Y-axis - Independent Z-axes and X-axes - Double swivel beam with two integrated rotary axes for loading and unloading parallel to main processing time Fsdpsw Hgk Aefx Adajpp - Siemens Sinumerik 840 D SL Solution Line control with NCU 730 - Oil distributor for NC rotary table - 1 set of clamping bridge supports - Torsion compensation - 5th axis directly driven twice - Boring head indexing - Base module for clamping hydraulics - Pneumatic pressure intensifier - Scraper belt conveyor - Automatic loading door - Emulsion mist extraction unit - Automatic rinsing cycle for loading area - Tool flatness monitoring - Position monitoring, base module and extension - Grating/walk-on grid - 24 quick-release couplings SW-ID No. 413288 - Tool breakage monitoring, inductive etc.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Standard Specifications of the Machine Table: Fjdpfx Aew Al Tbjdaspp Working area: 305 x 305 mm Max. workpiece volume: Ø 500 mm x 560 mm Max. table load: 250 kg Travel: X-axis: 510 mm Y-axis: 510 mm Z-axis: 490 mm Rotary axis: 0.001° – 360° Distance table top – spindle center: 40 - 550 mm Distance table center – spindle nose: 100 - 590 mm Spindle: Spindle taper: NST No. 40 Spindle speed: 20 – 20,000 rpm Drive: 4-step gearbox (2 mechanical, 2 electric) Max. torque: 157 Nm Feed: Rapid traverse X, Y, Z-axis: 50,000 mm/min Rapid traverse 4th axis: 9,000°/min 90° rotation of 4th axis: 0.6 seconds Cutting feed X, Y, Z-axis: 40,000 mm/min Tools: Tool positions: 40 Tool selection: direct, bi-directional Tool holder: BT (SK) 40 Max. tool diameter: 95 mm (150 mm if adjacent positions are empty) Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1.7 seconds Tool change time (chip-to-chip): 5.0 seconds Motors: Spindle motor (30 min./continuous operation): 11.0 kW AC Tool changer motor: 400 W AC Coolant system motor: 1,200 W AC Pallet: Pallet change time: 6.0 seconds Other: Power supply: 25 kVA, 200V AC, 3-phase Air supply: 5 bar, 330 l/min Dimensions: Machine height: 2,940 mm max. Footprint with chip conveyor: 3,492 mm x 3,173 mm Weight: 9,900 kg Control: Fanuc 16iMB Standard Accessories Spindle with 20,000 rpm and 4-step gearbox (2-speed gear drive, 2-speed electronic gear) 2-Point spindle bearing compensation within 0.005 mm (IAC System 1) Big-Plus spindle (contact in taper and face) Automatic spindle taper cleaning with compressed air Through-spindle coolant at 15 bar with separate pump Spindle bearing lubrication system (air-oil mixture) Spindle cooler Automatic lubrication of axis ballscrews in X, Y, and Z axes Automatic high-speed tool changer with 40 tool stations Fixed tool position: each tool is independently coded by the machine and identified in the magazine Original Kitamura tool wait-release function via pre-selection of the T-code Automatic 180° pallet changer (2 stations) Coolant pump 1,200 W Double-deck chip conveyor with 2 chip belts for coarse and fine chips, with filter system Lower chip flushing with separate 1,200 W pump Fully enclosed guard Automatic central lubrication of guideways Air FRL unit (filter, regulator, lubrication) Hydraulic power unit with tank Work light Cycle end lamp Tapping without compensating chuck 4 free M-functions, M20 – M23 Swiveling control panel Portable handwheel RS 232C interface PCMCIA interface Door interlock Emergency stop at tool magazine Manual index switches at tool magazine Self-diagnostic function

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: S2749544010016, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK ONE, rotational speed (max.): 16,000 rpm, number of slots in tool magazine: 167, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Rotary pallet storage system PSS-R1800 with 10 storage locations - 167 tools in system _____ Basic machine G440 Travels: X=800, Y=800, Z=800 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector: 1,000 m³, filter class ISO ePM1 80% Machine cooling system with air-cooled cooling unit dynamic package Electrical cabinet lighting Machine control system SINUMERIK ONE with machine control GROB⁴Pilot gen. 2 Swivel axis calibration GSC for 4-axis machining centers Program for creation of an automatic clamping sequence Time-controlled start of warm-up program - programmable at the HMI EES function to realize CN program on an external data carrier (SIEMENS) Technology package SINUMERIK MDynamics - milling (SIEMENS) Control panel to enter tool data at tool loading and unloading position Pallet guide element at rotary table Extension of B-axis' radius of action Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Triple disk-type tool magazine HSK-A 63 with 167 (47+10|50|60) tool pockets Tool cleaning device Tool coding, system BIS-M Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Setup station door for manual loading and unloading and automatic load and unload systems Rotary pallet storage system PSS-R1800 with 10 storage locations Air gun at setup station Fodpfswz Eddjx Adajpp Cutting fluid return from pallet storage system PSS to machining center Lighting in the setup station of the PSS pallet storage system Clamping program editor for setup station of PSS-R450-1800 Support EES-call PSS-R450-1800 Support GSC swivel axis calibration PSS-R450-1800 NC program management system by the primary control PSS-R450-1800 Tool requirement planning PSS-R450-1800 5x Pallet 500 x 630 mm, T-slots Pallet equipped with 6 fluid connections High-pressure cutting fluid system (5-40 bar, IKZ) Cooling fluid system Premium - system description Premium flushing package Part clamping system in work area, customer-specific Part clamping system in setup station of pallet storage system PSS, customer-specific Part clamping system in setup station of pallet changer, customer-specific Rotating inspection glass for work area door Infrared probe OMP60 (RENISHAW) Remote machine diagnostics with access control switch 12-month warranty

Condition: new, Year of construction: 2025, AVEREX HS-540i GTS 2-APC, New Machine Horizontal Machining Center with the option to adapt an optional pallet rotary magazine (6-APC or 8-APC) Standard equipment - AVEREX MPro1 (FANUC 0i-MF Plus) - 15" color LCD display, MANUAL GUIDE i, QWERTY* keyboard - iHMI – Intelligent Human-Machine Interface - Program memory with 2 MB and up to 1,000 programs - 4-axis simultaneous operation (X, Y, Z, B) - AICC II Control with 200-block Look Ahead function - HRV3+ servo drives (digital servo current control) - JERK Control (jerk regulation) - Fine Surface Technology (High-Speed High Quality) - Extended workpiece coordinate system G54.1 P1 - P300 - Workpiece coordinate system G52 - G59 - Memory card (PCMCIA Flash Card) and USB slot - Network interface RJ45, Embedded Ethernet - Enhanced embedded Ethernet - Week timer: Auto. Power On/Off for the machine - High-speed skip function - Tool Offset Memory C - 400 pairs of tool corrections - 1,000 storable programs - Programmable data input (G10) - Programmable spindle load monitoring M37/M38 - Tool life management - Extended macro variables (#100–#199, #500–#999) - Program restart - Helical interpolation - Cylindrical surface interpolation (G07) - Fixed drilling cycles - Synchronous tapping (G84/G74) - Rigid tapping with bell-shaped acceleration/deceleration - Programmable mirroring, scaling - Polar coordinate programming (G15/G16) - Chamfering or rounding corners (,C / ,R) - Optional skip blocks, up to 9 - User-defined macro programming Axis Travel - Travels X/Y/Z: 800/800/860 mm Speeds - Rapid traverse X/Y/Z: 74/74/74 m/min - Feed rate during milling: 0–40,000 mm/min - Rapid traverse B: 66.6 min-1 - 1G+ acceleration Pallet Changer - Rotary changer - Number of pallets 2-APC: 2 (machine / setup station) - Pallet size: 500 x 500 mm - Hole grid: 5 x 5 M16 x 25 mm deep, 100 mm pitch - Loading capacity: 550 kg per pallet - Workpiece size 2-APC: Ø800 x H1,000 mm - Workpiece size 6-APC/8-APC: Ø800 x H900 mm - Mechanical locking of pallet clamping - Pallet clamping force: 9.8 kN x 4 cones (39.2 kN) - Pallet height from floor: 1,100 mm - Standard preparation for retrofit of 4-way pallet storage (HS-540i GTS 2-APC ==> 6-APC, 2 + 4 pallets) High-Speed Tool Changer - Tool holder: BBT-40 (optional SK-40 DIN69871 or HSK-A63) - Number of magazine positions: 80 - Max. tool diameter: Ø95 mm - Max. tool diameter with adjacent spaces free: Ø185 mm - Max. tool length: 400 mm - Max. tool weight: 8 kg - Type: Fixed place / random - Speed: 16 s for 80 tools - Tool change time: 0.9 s / 2.1 s (heavy tool) - Chip-to-chip time: 3.0 s / 3.5 s (heavy tool) Spindle Fpjdpfx Aewxdpgjdaop Rotary Axis - Manufacturer: PARKSON™ - Axis: full 4th axis - Max. rotation: 66.6 rpm - Indexing: 0.001° - Clamping torque: 5,000 Nm - Holding torque: 1,973 Nm Linear Guides - Manufacturer: THK™ - Width: 45 mm - Guide shoes X/Y/Z: 190 x 120 / 120 x 70 / 154 x 86 mm Ball Screws Coolant, chip, and compressed air management

Condition: excellent (used), Year of construction: 1998, Fanuc System 16 MC control Travel paths X/Y/Z 800/750/770 mm Spindle speed 20,000 rpm Tool magazine for 132 tools HSK A-63 Dual pallet changer 630x630 mm Knoll system with internal coolant supply Fedpfjwwkh Tjx Adaopp Chip conveyor

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, pallet load 500 kgs, 60 ATC, BT40 spindle taper, Fanuc 31i- control. Spindle power 22Kw, Fodpfx Aowq Iwxodaepp B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant.

Condition: used, Year of construction: 2013, Type Crack Maschine In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Fsdpfjwizmwex Adajpp if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!