Guard and Grading GmbH

Year of construction: 2020, condition: used, This listing is for Puro-i III | RO Water Purification System Ksdpfx Aoz D H D Ejchenb The unit is in full working condition and ready for immediate use The Avidity Science Puro-i III is an integrated reverse osmosis water purification system designed to produce Type III laboratory water directly from potable tap water. Depending on configuration, the system provides production rates from 5 to 30 L/hr, with dispensing at up to 2 L/min. Features include twin-pass RO technology, automatic RO sanitisation and an interactive touchscreen interface. Typical specifications include Type III water production, up to 99% inorganic rejection and feed-water pressure of approximately 0.5–6 bar. Available configurations include different production rates, reservoir conductivity monitoring and loop options Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, Year of construction: 2013, operating hours: 28,500 h, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, LOT scope: 3x welding robots for external connection 2x handling robots 5x control cabinets 5x main power cable for robot cabinet 5x communication cable for robot cabinet 5x panel with supply line to the cabinet Kedpfsz D H Drex Achenb Operating hours: between 28,500 and 39,000 hours Manufacturer: ABB Model: IRB 6640-235/2.55 Type: IRB 6640 M2004 Reach: 2.55 m Handling capacity: 235 kg Center of gravity of payload: 300 mm Wrist torque: 1324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm 3x 400V AC 50-60 Hz 20 A Accessories: Control cabinet: Type: IRC5 M2004 Operating panel: FlexPendant Model: DSQC 679 Cable set: Main connection cabinet to robot Leoni add-on: Cable set for handling or welding

Condition: new, Year of construction: 2023, functionality: fully functional, fuel type: gas, output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: Jenbacher, NEW power plant equipped with a reconditioned generating set; two units are immediately available. NEW container, NEW fittings, Dia.Ne XT4, and a fully overhauled generating set; overhaul report available. Kedpfjz D H Dlex Achsnb ECOMAX 10 G2P NGS with a containerized Jenbacher JGS 320 GS-N.L 400V. Drawings and engine data sheets are available. Option to switch to the EGHE 200°C + by-pass configuration. Further customization options can be discussed.

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 220 V, oil tank capacity: 5 l, machine/vehicle number: GDI-6000, Equipment: CE marking, It features a specially designed ergonomic structure. (The cabinet section also serves as a cargo carrying box.) Aluminum body, test rail, and bottle holder; flexible, custom test tubes resistant to hot and cold weather conditions, 6X150 (mg). From 1 injector to 6 injectors, with easy-to-connect fittings, injectors can be connected in a short time. Thanks to the injector drip reservoir, you can perform detailed spray pattern detection. Each test lasts a maximum of 90 seconds. With a 200 bar system (Electronic Measurement) specially designed for the GDI-6000, pressures are measured clearly. The GDI-6000 reaches a maximum of 200 bar. Thanks to this pressure, drip tests can be observed very clearly. With the ability to print receipts, you can provide test results to service centers and organizations that require them. Thanks to the DATABASE, the (mg) values that more than 6000 different types of injectors should deliver can be seen on the 7.0-inch touch screen. Knedpfx Asz D H Dfscheb Thanks to the NEW-ENJ+ MODE, you can create and save injectors and injection parameters that are not found in the DATABASE. Thanks to the OHM-TEST MODE, you can measure the injector (OHM test) values. AUTO-1: Low speed (4000 RPM) AUTO-2: Medium speed (5000 RPM) AUTO-3: High speed (7000 RPM) DRIP TEST: Thanks to the Leaking Out mode, you can perform injector drip (leakage) tests clearly under pressure. Thanks to the MANUAL MODE, you can perform the desired RPM, PULSE, and TIMER tests with the RPM+ PULSE+ and TIMER+ settings.

Condition: like new (used), functionality: fully functional, mileage: 137,000 km, power: 251 kW (341.26 HP), first registration: 10/2020, fuel type: diesel, empty load weight: 11,245 kg, maximum load weight: 14,775 kg, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, brakes: VEB, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel-air, number of seats: 2, total length: 11,500 mm, total width: 2,550 mm, total height: 3,550 mm, loading space length: 9,050 mm, loading space width: 2,450 mm, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, electronic stability program (ESP), full service history, lane keeping assist, navigation system, power assisted steering, truck registration, ADDRESS: Außenplatz 13089 Berlin Complete service history, Volvo maintenance contract New inspection/MOT Payload: 14,880 kg, 23 loading spaces 2.0 t tail lift with a 2 m shield VEB (Volvo Engine Brake) staged braking assistant Automatic transmission Air conditioning Rear view camera Distance control cruise control 6x2, 3rd axle liftable and steerable Electric windows Knjdpfoz D H A Uox Achjb Central locking Electrically adjustable exterior mirrors Sun visor Trade-in possible Delivery possible WhatsApp +49 177 2773745

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 34608, total width: 3,700 mm, total length: 7,200 mm, overall weight: 3,500 kg, input voltage: 400 V, input frequency: 50 Hz, Air cushion table with breaker bars – tiltable with support Breaker bars: Kedpfx Asz D H A Ischenb 3x X 2x Y

Condition: used, total width: 1,100 mm, total height: 1,500 mm, total length: 1,800 mm, Motor power: 4.0 kW Hopper (diameter): 1000 mm, with agitator Knedez D H Azepfx Achob Throughput: 25 - 25 kg/h, depending on the material

Year of construction: 1998, condition: used, Rated current: 7.6A, frequency: 50Hz, control voltage: 110V, machine lamp: 24V, degree of protection: IP54, connected load: 5kVA, weight: 1.65t, with CE marking, an on-site inspection is possible. Knodpsz D Hzksfx Achsb

Year of construction: 2020, condition: used, Product: Sylysia 350, Gasil 23 D, Precarb 800, Calcilit, Benzophenone (partially lumpy), Lo-Vel 8100, Syloid 7000, bulk density: 0.08-0.73kg/l, particle size: powder, product temperature: 5-30°C, moisture: dry, consistency: free-flowing, non-sticky and non-agglomerated, system capacity: according to customer-provided container handling, operating mode: 3-shift operation, installation location: indoors/heated, ambient temperature: 5-30°C, power supply: 400V, 3Ph,N, 50Hz, control voltage: 24VDC, compressed air supply: 4-6bar, oil-free, max. surface temperature: 200°C, with documentation. An on-site inspection is possible, not connected to power. Ksdpfjz D Hzqox Achsnb

Condition: used, Ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible. Kodpfx Acjz D Hzdjhonb

Condition: good (used), Year of construction: 2022, Loma CW3 Checkweigher Serial: EQCW-143-DEV-026380 Ksdpfxoz D Hy Te Achsnb 2022, Stainless checkweigher, belt dimensions 2050mm x 180mm, weigh bed 180mm x 200mm, weight range 100g - 1500g, with pneumatic push arm reject into locked reject bin, HMI Touch screen controls, 1Ph

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total height: 1,500 mm, total width: 900 mm, total length: 1,400 mm, overall weight: 850 kg, IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 1400*900*1500 mm over width, depth and height. Instructions and packing come with the machine. With special Bandsaw pneumatic band insertion device for 10-25 mm width. Voltage 400-440 V Power 25 kVA Frequency 50-60 Hz Serial no. 239635 Year of manufacture 2012 Bandsaw blades welding widths From 6 to 50 mm possible, current setup is for blades from 10 to 25 mm wide. Ksdpfxoz D Hyye Achjnb

Condition: new, mileage: 1,225 km, power: 260 kW (353.50 HP), fuel type: electric, axle configuration: 6x2, wheelbase: 4,500 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 2, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, power mirror, traction control, = Additional Options and Accessories = - Roof hatch - Differential lock - Remote-controlled central locking - Cruise control - Adjustable steering wheel - Air conditioning - Leather steering wheel - Air suspension - Disc brakes - Sun visor - Power take-off (PTO) - Power take-off (PTO) - Partition with window = Additional Information = Axle configuration Suspension: Air suspension Knjdpjz D Hyaofx Achjb Front axle: Alloy wheels; Steerable Rear axle 1: Dual tires; Differential lock; Alloy wheels Rear axle 2: Alloy wheels; Lift axle; Steerable Weights Unladen weight: 12,650 kg Payload: 14,350 kg GVW: 27,000 kg Functional Body manufacturer: HIAB ULTIMA 18S 59 FLEX Tipper: Rear Condition Overall condition: very good Technical condition: very good Optical condition: very good

Condition: excellent (used), functionality: fully functional, Weiler center lathe, model Condor 81, with a leading and following center, and a 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture 1982, machine number 82 017 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5, with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approximately 1100 kg >> Spindle brake can be engaged >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching between mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching the counting direction >> 1 three-jaw chuck, 160 mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back wall >> Coolant system >> Machine feet At an extra cost: New collet chuck and new collets from 3 to 26 mm, in 1 mm increments. About the machine: Knsdpfx Ajz D Hx Njcheb A used Weiler Condor 81 in very good condition is offered. It comes from a training center and has been well maintained. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on site while it is powered up.

Condition: used, Year of construction: 2015, operating hours: 392 h, load capacity: 230 kg, Empty weight: 1.565 kg GVW: 1.795 kg Dimensions (LxBxH): 207 x 81 x 210 cm Knodpfez D Hx Aex Achob Working height: 800 cm Availability: in stock

Condition: used, Year of construction: 2015, operating hours: 433 h, load capacity: 230 kg, Empty weight: 1.565 kg GVW: 1.795 kg Dimensions (LxBxH): 207 x 81 x 210 cm Working height: 800 cm Knjdpez D Hxvsfx Achjb Availability: in stock

Condition: used, Pneumatic pick and place manipulator, loading unit similar to a SCARA robot with a parallel gripper. Handling device, handling system, pick-up gripper, loading gripper for automation. Horizontal axis with guide cylinder, linear module type SM 32/150 (column module GEMOTEC). Vertical axis with guide cylinder, linear module type SM 20/060 (column module GEMOTEC). Parallel gripper type GMP 20. Load capacity: max. 2 kg. Horizontal movement: 150 mm (pneumatic). Vertical movement: 60 mm (pneumatic). Vertical adjustment on the two support columns: 435 mm (manual, with clamping). Support columns, vertical guide column: Ø 45 mm. Guide column, linear module type SM 32/150: Ø 20 mm. Guide column, linear module type SM 20/060: Ø 12 mm. Mounting foot: 180 x 75 mm. - Can be moved pneumatically in two axes. - Part gripper, parallel gripper type GMP 20 (65 x 35 mm). Space requirement L x W x H: 550 x 160 x 550 mm. Knedjz D Hxiopfx Acheb Weight: 17 kg. Very good condition. Various manipulators available, see our webshop.

Condition: good (used), Robot Coupe R30 Vertical Cutter Mixer Ksdpfx Acoz D Hw Sehenb Stainless, 30L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph

Condition: excellent (used), functionality: fully functional, mileage: 69,820 km, power: 74 kW (100.61 HP), first registration: 07/2009, overall weight: 5,000 kg, fuel type: diesel, color: red, axle configuration: 4x4, maximum load weight: 2,580 kg, empty load weight: 2,420 kg, tire size: 225/75 R16C, next inspection (TÜV): 09/2027, fuel: diesel, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: hydraulics, loading space width: 1,260 mm, loading space length: 1,800 mm, loading space height: 500 mm, Year of construction: 2009, operating hours: 3,042 h, machine/vehicle number: WMU2X56E49WL00151, Equipment: ABS, all wheel drive, traction control, trailer coupling, For sale is a TREMO X56 CARRIER from MULTICAR with all-wheel drive and switchable all-wheel steering. The TREMO features a 3-sided tipper including a tarpaulin frame and tarpaulin, municipal equipment, and accessories such as a snowplow including a rear spreader and a self-loading front broom. The vehicle has been well-maintained according to its service schedule and has very good features. MULTICAR Specifications: - Registration date: 14.07.2009 - Mileage: approx. 69,820 km - Operating hours: 3042h - Inspection valid until 09/27 - Euro 4 - VIN: WMU2X56E49WL00151 - Engine power: 101 hp - VW TDI engine 2l - All-wheel drive - Switchable all-wheel steering - Body: L=1800mm W=1260mm H=500mm - 1st axle tires: 225/75 R16C Tread: 80% - 2nd axle tires: 225/75 R16C Tread: 80% - 3-sided tipper with aluminum sideboards - Trailer coupling - Automatic transmission - 1 tank 55l - Work lights - Rotating beacon Accessories: - Snowplow 1500mm-2400mm - Rear-mounted spreader - Front broom 1500 ATTENTION, PLEASE NOTE: Our vehicles are generally offered WITHOUT a new inspection, without a new emissions test, and without a new occupational safety inspection!!! These can be carried out for an ADDITIONAL CHARGE. Vehicles sold to non-EU countries are sold only against a VAT deposit!!! Vehicle registration, license plates, customs license plates... can be arranged for an ADDITIONAL CHARGE!!! Sale is EXCLUSIVELY to commercial enterprises, dealers, or for export!!! Offer subject to change, errors and omissions, modifications and prior sale reserved. Financing possible upon request. Knedpfxjz D Hwxs Acheb We will also be happy to arrange customs clearance for you. Opening hours: Mon-Fri 8 a.m. - 2 p.m. or by appointment Price is NET/Negotiable An invoice with VAT will be issued upon sale. Vehicle location: Im Gewerbepark 11, 99441 Umpferstedt

Condition: used, mileage: 183,000 km, power: 191 kW (259.69 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel-air, total length: 9,500 mm, total width: 2,550 mm, total height: 3,770 mm, loading space length: 7,600 mm, loading space width: 2,500 mm, loading space height: 2,570 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, Year of manufacture: 2020 Front axle: Steering; Tyre profile left: 100%; Tyre profile right: 100%; Suspension: leaf suspension Rear axle: Double wheels; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90%; Suspension: air suspension Empty weight: 7.858 kg Carrying capacity: 8.142 kg GVW: 16.000 kg Tail lift: Dhollandia, 2000 kg Knsdpfx Acjz D Hwrshsb Price: On request = Additional options and accessories = - Hardwood floor - Lane Assist - LED- lighting - Outside temperature display - Radio/CD player - Roof spoiler - Visor = Remarks = 2x Suspension seat 2x Bindingrails

Condition: good (used), Robot Coupe R45 Vertical Cutter Mixer Stainless, 45L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph Kodpfx Asz D Hwlochsnb

Year of construction: 2020, condition: used, This listing is for Lancer 1400 LXP Ultima Laboratory Washer Getinge The unit is in full working condition and ready for immediate use The Lancer 1400 LXP is a freestanding, high-capacity laboratory glassware washer and dryer designed for demanding laboratory environments. It features three wash levels, multiple rack positions, automatic detergent and acid dosing, forced-air HEPA-filtered drying and programmable wash cycles. The chamber has a capacity of approximately 304 litres. Manufacturer specifications list external dimensions of approximately 789 x 831 x 1728 mm and a power requirement of 13.5 kW Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: Knsdpoz D Huqjfx Achsb By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: TAM-164, compressed air connection: 6 bar, input voltage: 400 V, total width: 1,880 mm, total length: 8,200 mm, total height: 1,950 mm, type of input current: three-phase, input current: 32 A, warranty duration: 3 months, pneumatic connection: 12 bar, power of the servo motor: 14,000 W, Equipment: CE marking, documentation/manual, type plate available, Used automatic KELLER Tampo master pad printing machine, designed for decorating pens and cylindrical parts. The machine enables 3-colour printing. The machine operates in fully automatic mode: the operator loads the parts into the feeder, and after completion of the process, the finished parts are automatically unloaded into a carton. The equipment includes a servo-driven chain conveyor, automatic part loading and unloading modules, a positioning station, an ionizer, three independent pad printing modules with an automatic pad cleaning system, hot-air drying between the individual printing stations, an IR drying tunnel after completion of the printing process, and a vision inspection system for print quality with automatic rejection of defective parts. Adjustable conveyor prisms and pneumatic rotary modules allow the machine settings to be adapted to different part dimensions. The machine is controlled by a Mitsubishi PLC and a 10″ HMI touchscreen, allowing recipes and process parameters to be managed. The machine is also equipped with a remote communication module. The production process starts with the automatic transfer of the part from the feeder onto the conveyor. The ionizer neutralizes electrostatic charges on the surface of the part before printing. The part is then positioned and transferred successively to three pad printing stations. Each station applies one colour, with hot-air drying between the individual printing stages. After completion of the three-colour printing process, the part passes through the IR drying tunnel and is then subjected to automatic vision inspection. Finished parts are automatically unloaded into a carton, while parts with detected defects are diverted to a separate container. Maximum graphic size: 60 × 60 mm Part dimensions: length 60–150 mm, diameter 8–14 mm. Knodpfxez D Ht Ts Achsb Machine output: up to 2400 pcs/h. Electrical power supply: 3 × 400 V, 32 A. Required compressed air pressure: 6–8 bar. The machine is operational and in working condition. A link to a video showing the machine in operation is provided below. Before sale, the machine will undergo servicing, and we provide a 3-month warranty. The machine can be inspected and demonstrated in operation at our premises in Poland (European Union). The standard demonstration includes a presentation of the machine's operation. Upon request, we can perform paid technological tests using the customer's parts. The machine is sold in the condition and configuration shown in the photographs. Upon request, modifications or additional equipment can be provided according to the customer's individual requirements. Standard delivery terms: EXW. We can additionally arrange transport to a location anywhere in the world. Additional equipment: possibility of manufacturing dedicated tooling for a specific part and carrying out technological tests, including selection of printing parameters and consumables. The price is quoted in EUR.

Condition: ready for operation (used), Year of construction: 2018, Belt sander manufactured in 2018. This HOMAG SANDTEQ W-100 features a robust design suitable for various sanding applications. It operates on a supply voltage of 400Y/230 V and is equipped with a 3-phase power system. If you are looking to get high-quality sanding capabilities, consider the HOMAG SANDTEQ W-100 machine we have for sale. Contact us for further details. Knsdpfxez D Htmj Acheb - Supply Voltage: 400Y/230 V- Phase: 3 Phase- Frequency: 50 Hz- Maximum Operating Full Load Current: 35 A- Fuse: 50 A- Control Voltage: 24 V- Control Unit Brand/Model: HOMAG Easy Touch

Condition: good (used), Machine configuration: First electronic cross-belt Second roller belt Third electronic superfinishing buffer belt Fourth electronic cross-belt Knedpfxjz D Hr As Achob In-line machine with vacuum system