AUTO AZ s.r.o

Condition: used, mileage: 253,865 km, power: 184 kW (250.17 HP), first registration: 01/2014, fuel type: diesel, number of seats: 27, gearing type: automatic, emission class: euro6, color: orange, brakes: retarder, Equipment: ABS, air conditioning, parking heater, * Our internal no.: 1182 * MAN A 66 MIDI * Well-maintained and clean vehicle from a German bus company. * Lion's City * 184 kW / 250 HP – EURO 6 * 253,865 km mileage * Automatic transmission * Spacious passenger cabin – air conditioning * Dimensions: L 8,810 mm, W 2,380 mm, H 3,175 mm * Vehicle equipped with wiring for front / side / side and rear matrix displays Njdpfxeyxcb Ij Abvscp * Mechanical folding ramp * Folding seats in wheelchair area * 32 standing places * Double glazing * Convector heating * Paintwork: clean * Interior: clean * Note: The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * All information supplied without guarantee * We reserve the right to prior sale * Please refer to our general terms and conditions (GTC)

Condition: used, mileage: 517,000 km, power: 294 kW (399.73 HP), first registration: 06/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, Manufacturer MAN Model TGS 26.400 6x2?4 19.000 l. ADR Tank Year 2009 Condition Good Serial Number WMA18SZZ69W135653 Ref. nr. 1558090 Reg. date: 26-06-2009 Hk: 400 Km: 517000 Gearbox: Automatic Njdpoyxcbzsfx Abvscp Eurotype: 5 Diesel tank: 1 Tank liter: 450 Air conditioning: ? Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/70R22,5 Cover% left 80 - 60 - 80% Front suspension: Springs Suspension rear: Air Toolbox: ? Total weight: 2 kg. Net weight: 9500 kg. Load capacity 16500 kg. Manufacturer: Eurotank Tank capacity: 19.000 l. Separation room: 3 ( Bottom filling: ?

Condition: used, mileage: 163,000 km, power: 338 kW (459.55 HP), first registration: 02/2002, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro3, Equipment: ABS, air conditioning, all wheel drive, Manufacturer MAN Model 35.464 8x8 Hvidtved Larsen 9000 L Year 2002 Condition Good Serial Number WMAE68ZZZ1L026665 Ref. nr. 1028102 Reg. date: Last seen: 27-02-2025 Engine: D28 Hk: 460 Km: 163000 Gearbox: ZF 16 S 221 OD Servo-Shift (Defekt) Eurotype: 3 Diesel tank: 1 Tank liter: 300 L Air conditioning: ? Number of beds: 1 Radio: ? Disc brake: ? Drum brake: ? ABS: ? Engine brake: ? Retarder: ? Tire Size: 445/65R22,5 / 365/85R20 Cover% left 30-50 % Front suspension: Springs Suspension rear: Springs Rear axle, hub reduction: ? Toolbox: ? Hydraulic system: ? Total weight: 32000 Kg Net weight: 20450 Kg Load capacity 11550 Kg Manufacturer: Hvidtved Larsen Nsdpoyxcbujfx Abvscp Tank capacity: 9000 L High pressure pump: Pralissoli High pressure pump hours: 535 Vacuum pump: Wittig Vacuum pump timer: 2728 Remote control: ? Fire suppression pump: ?

Condition: new, power: 110 kW (149.56 HP), number of beds: 4, fuel type: diesel, gearing type: automatic, total length: 5,880 mm, total width: 2,160 mm, total height: 2,910 mm, axle configuration: 2 axles, emission class: euro6, overall weight: 3,500 kg, Year of construction: 2024, Equipment: ABS, air conditioning, bathroom, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter,

Condition: used, Year of construction: 2017, functionality: fully functional, Machine Type: Automatic single-sided edge banding machine Key Features: Model: K 800R Capacity: 1 unit, net weight 2,472 kg Purpose: Edge banding and processing of wooden and plastic components for the furniture industry Standards: Complies with European safety regulations (CE certified) Equipment & Accessories: AUTOMATIC SINGLE-SIDE EDGEBANDER European safety regulations (CE norms) Olimpic K 800 "T-ERL" composition (47) Volt 400 EU Frequency 50 Hz R067201 "AUTOSET" for ER2, T-ERS and T-ERL compositions "StarTouch" electronic control instead of "Touch 7" Panel spacer on infeed fence Electronic positioning of top presser Horizontal movement of "K-SEL" end cutting unit RAS/S 2P edge scraping unit "AAR" anti-adhesive unit "EASY SIZE" device Ncjdpfx Aboyxcbhsvjp Edge detecting sensor "IGLUE" kit for gluing unit "SGP" glue pot with manual dosing in substitution of he standard one 2 positions pneumatic kit for RI/800 trimming unit 3 positions pneumatic kit for RI/800 trimming unit Spray-mist device for delicate edges "RCA/2C" glue scraping unit "SPN" brushing unit Edge scraping unit radius = 1 mm Edge scraping unit radius = 2 mm Wood blocks

Condition: used, mileage: 50,500 km, power: 75 kW (101.97 HP), first registration: 12/2019, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Mercedes-Benz Vito Panel Van 110 CDI Compact German vehicle from first owner. Excellent condition, only 50,500 km. New TÜV and emissions test (TÜV-AU). Special features: Towbar: Electrical wiring for trailer socket, Audio 10 system (radio with CD player), wooden floor in the cargo area, comfort lighting in driver/passenger and cargo area, steering wheel (mechanically adjustable steering column), cab seats: double passenger seat, cab seats: heated driver’s seat, cab seats: comfort driver’s seat, fleece battery 92 Ah, thermal insulation glazing, two-way front speakers. Additional features: 3-button remote control for central locking, 3rd brake light, adaptive brake light, passenger airbag, driver airbag, hill-start assist, exterior mirrors: both aspheric and mechanically adjustable from inside, outside temperature display, roof rack mounting rails, BlueEfficiency package, brake assist, braking system with ABS+ASR, ceiling light in cargo area, assistance system: Attention Assist (drowsiness detection), assistance system: breakdown management, assistance system: Crosswind Assist, windscreen antenna, 185A alternator, 6-speed manual gearbox, cup holders rear/front, seatbelt pre-tensioners, passenger grab handle, lockable glove compartment, body/chassis: standard panel van, body/chassis: compact, communication module (LTE) for digital services, fuel tank: main tank 57 l, full-height cargo partition, load anchoring/tie-down points, Mercedes-Benz emergency call system, engine: 1.7-litre, 75 kW CDI CAT, rear fog lamp, wheelbase 3,200 mm, low emissions to Euro 6d-TEMP standard, right side sliding door (cargo/passenger area), seatbelt warning system (driver/passenger side), seat upholstery: fabric, steel wheels 6.5x16, window pillar trim, load/passenger compartment trim: half-height hardboard, lashing rails in cargo area (side wall at roof frame), Assyst service interval indicator, permissible GVW 2.80 t Ncjdpfsyxcaqox Abvop * Sales consultant information * + * APPOINTMENTS ARE REQUIRED FOR TEST DRIVES OR VIEWINGS * + * Trade-in and financing possible. * Input errors cannot be ruled out. * Please check the equipment on site – input errors and prior sale excepted.

Condition: used, mileage: 247,000 km, power: 92 kW (125.09 HP), first registration: 11/2012, fuel type: diesel, overall weight: 3,300 kg, next inspection (TÜV): 09/2027, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, soot filter, Nissan NV400 Panel Van L1H1 3.3t dCi "PRO" German vehicle from first owner Workshop shelving Tow bar – 2,500 kg towing capacity Ncjdpeyxcakofx Abvop Special features: Cool & Sound Package Additional features: Driver's airbag, electrically adjustable and heated exterior mirrors, PRO design and equipment line, rev counter, electronic brake-force distribution (EBD), hill-start assist system, rear wing doors without windows, standard panel van body, 80 litre fuel tank, bulkhead partition, height-adjustable steering column (steering wheel), 2.3 litre 92 kW dCi diesel engine with catalytic converter, rear fog light, wheelbase: 3,182 mm, spare wheel with road tyres, low-emission according to Euro 5 emissions standard, gear shift indicator, right-side sliding door for cargo/passenger compartment, front mud flaps, passenger bench seat in cab, rear entry step, heat-insulating glazing with UV protection * Sales consultant info * + * VIEWING OR TEST DRIVE BY APPOINTMENT ONLY * + * Trade-in and financing possible. * Errors are not excluded. * Please verify the equipment details as input errors and prior sale are reserved

Condition: used, mileage: 222,732 km, power: 316 kW (429.64 HP), first registration: 03/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: blue, gearing type: automatic, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, Stock no. 5755 Mercedes Benz 2643 Arocs with Meiller Steel 3-Way Tipper / Bordmatik / 6x6 HAD / 1st Owner ---- Nsdpfx Abjyxb Utjvscp * Manufacturer: Mercedes Benz * Model: 2643 Arocs * Mileage: approx. 222,732 km * First registration: 03/2021 * Transmission: Automatic – Powershift * Gross vehicle weight: 26,000 kg * Unladen weight according to registration: 12,325 kg * Axles: 6x6 HAD / planetary axles / disc brakes * Wheelbase: 3.60 m * Suspension: front leaf spring, rear air suspension * Tyres: 1st axle 385/65 R22.5 approx. 50%, 2nd+3rd axle 315/80 R22.5 approx. 50% * Cab: M-Cab ClassicSpace/ 2 seats * Colour: Cab blue/red, tipper body blue * EBS / ABS / ASR * MOT: 05/2026 * Engine: 430 hp / Euro 6 * Tipper body internal dimensions approx. 4.90 m long x 2.38 m wide x 1.00 m high / front wall approx. 1.20 m high * Meiller 3-way steel tipper with Bordmatik * Front wall protection plate * 4 pairs of recessed lashing eyes * 290 litre aluminium diesel tank, left side * 60 litre AdBlue tank, left side * Stone guard grille for headlights * LED work light left * LED work light right * Additional LED reversing lights * Rigid underride guard * 50 mm trailer coupling with air, electrical, and hydraulic connections * Step access on cab with handrail on roof * Cab rear wall with window * Individual mudguards for 2nd and 3rd axles * Sun visor * Roof hatch * Beacon lights * Storage box between seats * Electric windows * Electrically adjustable and heated mirrors * CB radio * Radio with Bluetooth and Apple CarPlay/Android * Multimedia cockpit * Multifunction steering wheel * Air conditioning * Driver’s seat heating * Cruise control * Offroad driving mode * Differential lock * High Performance Engine Brake * Rocking mode * Anti-roll lock * Reverse warning system * Central locking with remote control * Light sensor * Rain sensor * 1st owner German vehicle!! German papers!! 1st owner!! Good condition!! Notice regarding possible errors in the advertisement: Despite careful preparation of the ad, errors or inaccuracies may occur in the text or the stated information. We accept no liability for mistakes, changes, or prior sale. All information is without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, Year of construction: 1991, SCHÜTTE SF 42 DNT Nedpfx Asyxb Umebvjcp Maximum bar diameter round / square: 42 / 36 mm Spindle pitch circle diameter: 340 mm Bar feed: 125 mm Longitudinal slide travel (total / working): 125 / 100 mm Cross slide travel (total / working): Top: 60 / 36 mm Middle: 60 / 36 mm Lower: 70 / 44 mm Spindle speeds (stepless): 315 – 2,240 rpm Main times (stepless): min. / max. 0.88 – 125 sec Secondary times: 1.1 – 1.4 seconds Creep speed: 3 rpm Main drive: 22 kW Dimensions (including bar guide): approx. L x W approx. 7.3 x 1.7 m Weight: approx. 10 t Voltage: 400 V / 50 Hz Scope of delivery: SCHÜTTE SF 42 DNT machine Bar loader

Condition: used, overall weight: 37,000 kg, axle configuration: 2 axles, first registration: 04/2018, next inspection (TÜV): 07/2026, Year of construction: 2018, Equipment: ABS, * Doll Fahrzeugbau 2-axle low-loader for forestry machinery, type T2H-0L * Air suspension * Hydraulically steered axles * Radio remote control * Overall length: 16.70 m * Low bed length: 9.50 m * Width: 2.55 m Njdpfxeyxb Tvo Abvecp * Gross weight: 37,000 kg (technically possible: 39,000 kg) * Unladen weight: 10,360 kg * Possible payload: 27,640 kg * Tyres: 235/75 R17.5 * Twin tyres * Ramps * BPW axles Roadworthiness certificate valid until 01/2027

Condition: used, mileage: 721,000 km, power: 460 kW (625.43 HP), first registration: 11/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Mercedes Actros 1863 4x2 tractor unit * Euro 6d * Giga Space cab Solostar * Safety package * ACC (Adaptive Cruise Control) * Lane assist Nodoyxb Tpopfx Abvjcp * Blind spot assist * PTO (power take-off) * Retarder, 2-circuit hydraulic * Leaf-air suspension * 1 tank 630L * Differential lock * Automatic climate control * Stand air conditioning * Auxiliary heater * Seat heating/ventilation * Refrigerator compartment * Mirror cams * Air horns * Alcoa aluminium rims * Air horns * Xenon headlights * Multimedia entertainment system * Electric windows (EFH) * Next MOT 01/27 - SP 07/26

Condition: excellent (used), functionality: fully functional, tool type: VDI 40, For sale is a package consisting of two high-quality driven tool holders for Traub TNA 480 / 500 / 600. Mount: VDI 40 (DIN 69880) Design: Axial Cooling: External coolant supply Ncodpoyxb Tcjfx Abvep Compatibility: Optimized for Traub TNA 480, TNA 500, TNA 600 (originally from a TNA 480L) Tool 1: Collet chuck Manufacturer No.: 723 240 Tool receptacle: ER32 collet Tool 2: Milling arbor / Weldon Manufacturer No.: 732 970 (marking 1 B) Tool receptacle: Weldon / milling arbor Ø 25 mm The tools are in very good, ready-to-use condition.

Condition: used, Year of construction: 2018, operating hours: 10,104 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 36 m/min, Equipment: chip conveyor, DOOSAN VC 630 5AX (5-AXIS machining center) Ncsdpfx Absyxb S Ssvsp Model: VC 630 5AX HEIDENHAIN TNC640 NC Year of manufacture: 2018 Condition: Used, very good, still in production Operating hours: 26,290 h Spindle hours: 10,104 h X-axis: 650 mm Y-axis: 765 mm Z-axis: 520 mm A-axis: +30° to -120° C-axis: 360° Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 36 m/min Maximum table load: 500 kg Spindle: 16000rpm 30/24kW Tool holder: HSK 63A Through-spindle coolant: 18 bar Height: 3295 mm Width: 3200 mm Length: 4585 mm Weight: 13500kg

Condition: new, maximum load weight: 746 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,515 mm, loading space width: 1,330 mm, loading space height: 1,685 mm, total width: 1,845 mm, total height: 2,300 mm, Year of construction: 2026, Refrigerated Trailer - HK 132614-18 PF30 Base price – €9,127, Our promotional price – €8,033 incl. 19% VAT, incl. freight costs (self-collection in Nuremberg), incl. registration certificate, incl. 2.5 m adapter lead for the refrigeration unit, 2 sliding supports included! Temperature range: +5°C to +10°C Suitable for: - Beverages - Cut flowers Technical specifications: - Trailer type: Single axle - Construction type: Sandwich - Unladen weight: 554 kg - Gross vehicle weight: 1,300 kg - Payload: 746 kg - Internal length: 2,515 mm - Total length: 3,920 mm - Internal width: 1,330 mm - Total width: 1,845 mm - Internal height: 1,685 mm - Total height: 2,300 mm - Load height: 535 mm - Tyres: 14 inch Standard equipment: - V-drawbar, hot-dip galvanized by immersion - 13-pin plug - 15 mm thick floor panel - 30 mm thick PurFerro sandwich construction Ncsdpfx Absyxb S Eevep - Single-leaf rear door - Stainless steel espagnolette locking bar and hinges - Jockey wheel - Refrigeration unit Description: The single-axle sandwich box trailer for temperature-controlled transport of your goods. The frame and chassis are made from hot-dip galvanized steel, ensuring long service life. The floor consists of special, multi-layer, waterproof bonded plywood with a non-slip phenolic resin coating. The body is constructed using a 30 mm thick sandwich panel with a core made of polyurethane foam, covered on both sides with galvanized, polyester-coated steel sheet. The edging profiles, rigid rear frame, and rear rain gutter are all made from anodized aluminum. The door hinges, lockable espagnolette locking bar, and door retainers are all in stainless steel. Plastic seals on the doors provide water-resistant transport for your goods. The Humbaur single-axle sandwich trailer—an indispensable helper for safe, temperature-controlled transport.

Condition: new, maximum load weight: 1,590 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 4,064 mm, loading space width: 1,774 mm, loading space height: 2,000 mm, total width: 2,292 mm, total height: 2,634 mm, Year of construction: 2026, Box Trailer - HK 254018-20P FlexxZurr Base Price – €9,080 Our Promotional Price: €7,900 incl. 19% VAT, incl. freight charges (self-collection in Nuremberg), incl. registration certificate! Technical specifications: * Trailer Type: Twin axle * Construction: Plywood * Tare weight: 890 kg * Gross weight: 2,500 kg * Payload: 1,610 kg * Internal length: 4,064 mm Nedpfjyxb Sxsx Abvecp * Total length: 5,546 mm * Internal width: 1,774 mm * Total width: 2,292 mm * Internal height: 2,000 mm * Total height: 2,634 mm * Loading height: 560 mm * Wheels: 15 inch Standard features: V-drawbar, hot-dip galvanized chassis * 13-pin plug and reversing light * 15 mm thick floor panel * Side walls and roof made of 15 mm multiplex wood with UV-resistant plastic coating * Interior light installed * Double-wing rear door * Galvanized locking bar and hinges * Tie-down rings in the frame profile, flexibly adjustable, tensile strength 400 kg per ring, Dekra certified * Automatic jockey wheel Description: The tandem plywood box trailer impresses with its well-designed details and versatile application options. The chassis and running gear are made of hot-dip galvanized steel, giving the Humbaur plywood box trailer series a long service life. The superstructure is fully manufactured from 15 mm multiplex wood with a special plastic coating, and can be decorated with your company advertising upon request for an additional fee. An interior light is installed for better visibility. All plywood box trailers are equipped with galvanized steel hinges and a lockable bar lock. Door seals made from plastic ensure water-protected transport of your goods. Aluminum reinforcements in the roof area and at the base of the front wall provide the Humbaur plywood box trailers with exceptional stability. The floor is made of specially bonded, waterproof plywood with a non-slip phenolic resin coating, 15 mm thick. The integrated side lashing system is mounted in anodized side-frame profiles. Each lashing ring has a tensile strength of 400 kg and is Dekra certified. This system is extendable upon request and offers transporters ample options for securing cargo. Edge profiles, a torsion-resistant rear portal, and rain gutters are made of anodized aluminum, offering the highest level of corrosion protection. The Humbaur tandem plywood box trailer: the ideal partner for transporting your goods.

Condition: new, maximum load weight: 610 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,100 mm, loading space height: 350 mm, total width: 1,552 mm, total height: 864 mm, Year of construction: 2026, Single-axle trailer HA 752111KV Base Price – €1345 Our Promotional Price – €1184 incl. 19% VAT, incl. freight costs (self-collection in Nuremberg), incl. registration certificate! Technical Data: * Trailer type – Single axle * Construction – Aluminium * Unladen weight – 140 kg * Gross vehicle weight – 750 kg * Payload – 610 kg * Internal length – 2,050 mm * Overall length – 3,019 mm * Internal width – 1,100 mm * Overall width – 1,552 mm * Internal height – 350 mm * Overall height – 864 mm * Loading height – 510 mm * Tyres – 13 inch Standard Equipment: Nodpsyxb Srefx Abvocp * V-drawbar, fully hot-dip galvanised * 13-pin plug * 15 mm thick floor plate * Drop sides made of anodised, double-walled aluminium profile * Tailgate(s) with recessed latches * Lashing rings (4 pcs. up to 2050 mm / 6 pcs. from 2510 mm box length) integrated into the side panels, lashing capacity 400 kg per ring, tested by Dekra * Humbaur multifunction lights integrated into underrun protection * Corner stanchions with insert options Description: Versatile all-rounder. With a wide range of accessories, you can equip the HA low-loader for many different applications. It will transport your motorcycles, bicycles, gardening equipment and more. Secure your load with the lashing rings recessed into the aluminium side walls to prevent it from slipping.

Condition: new, maximum load weight: 2,425 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,620 mm, loading space width: 1,845 mm, loading space height: 400 mm, total width: 2,003 mm, total height: 1,251 mm, Year of construction: 2026, Three-way tipper – HTK 3500.37 Bohlenschacht pre-installed, 8 lashing rings, electric and hand pump Njdpfx Aoyxb Slobvjcp Base price – €10,990. Our special price – €9,700 incl. 19% VAT, incl. freight costs (self-collection in Nuremberg), incl. registration certificate! Technical Data: * Trailer type – tandem axle * Construction – Fuhrmann-BW, heavy-duty steel side panels * Rear tipping angle – 45° * Three-way tipping angle – 45° * Unladen weight – 1,075 kg * Gross vehicle weight – 3,500 kg * Payload – 2,425 kg * Internal length – 3,620 mm * Total length – 5,143 mm * Internal width – 1,845 mm * Total width – 2,003 mm * Internal height – 400 mm * Overall height – 1,251 mm * Loading height – 760 mm * Tyres – 13 inch Features: * V-drawbar, hot-dip galvanised * Chassis and tipping body, hot-dip galvanised * Tipping body made from one-piece steel * Hand pump, optional electric hydraulic pump from 3,000 kg max. authorized weight (electric and hand pump standard) * Humbaur multifunction lighting * Detachable steel side panels * Rear flap with swing function * Lashing rings mounted in bed floor, 800 kg pull force per ring * Support wheel * Plank compartment prepared for easy retrofit of aluminium planks Description: The HTK three-way tipper not only meets our usual high quality standards, it is also equipped with a practical hand pump which can be easily replaced by an electric hydraulic pump if required. From a maximum gross weight of 3,000 kg, both electric and hand pump are included as standard equipment. This makes unloading your cargo no longer a challenge, but child’s play.

Condition: used, Year of construction: 1995, SCHÜTTE SF 26S DNT Nedpfxsyxb Nde Abvjcp Maximum bar diameter, round / square: 26 / 19 mm Spindle pitch circle diameter: 270 mm Bar feed: 125 – 290 mm Longitudinal travel of slides (total / working): 125 / 98 mm Cross slide travel (total / working): Top: 40 / 25 mm Middle: 40 / 25 mm Bottom: 50 / 31 mm Spindle speeds (stepless): 530 – 3,750 rpm Main times (stepless): min. / max. 0.72 – 100 s Secondary times: 0.90 – 1.1 seconds Creeping speed: 3 rpm Main drive: 22 kW Dimensions (including bar guide): approx. L x W, approx. 7.2 x 1.6 m Weight: approx. 6.8 t Voltage: 400 V / 50 Hz Scope of delivery: SCHÜTTE SF 26S DNT machine Bar feeder

Condition: ready for operation (used), Table diameter: 2250mm Max. swing diameter: 2500mm Max. workpiece height: 1600mm Ncsdjyxb I Tepfx Abvsp

Condition: good (used), mileage: 1,064,453 km, power: 315 kW (428.28 HP), first registration: 10/2020, axle configuration: 4x2, fuel: liquefied natural gas (LNG), color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, seat heater, soot filter, spoiler, = Additional options and accessories = - Aluminum fuel tank - Roof spoiler - EPS (Electronic Steering) - Low noise - Particulate filter - Radio/CD player - Sliding roof - Sleeper cab - Side door - Seat heating - Auxiliary heater - Toolbox - Xenon lighting = Further information = Front axle: Steering; Suspension: leaf suspension Rear axle: Suspension: air suspension Unladen weight: 8,138 kg Payload: 9,862 kg Gross vehicle weight: 18,000 kg APK (main technical inspection): valid until 10/2026 Technical condition: good Visual condition: good Vehicle number: 104 VOLVO FH 420 / Globetrotter / Euro 6 / Diesel + LNG GAS .: YV2RZ70A9LA866301 Inspection: HU (General inspection): 09/2025 - SP (Safety Inspection): 03/2025 Suspension: leaf / air Transmission: automatic Air conditioning Engine brake Cruise control Auxiliary heater Distance assistant Navigation system Emission standard EURO 6 Diesel + LNG GAS No liability for printing or typographical errors. Subject to changes, prior sale and errors! = Company information = No liability for printing or typographical errors. Subject to changes, prior sale and errors! Al Shogran GmbH Ncedoyxb H Nepfx Abvep An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, overall weight: 2,700 kg, MAZAK QUICK TURN 8 Serial number: 69867 Year of manufacture: 2010 Tool changer: 6 stations Control system: MAZATROL CAM T-2 Weight: approx. 2700 kg Chip conveyor: TSL BAKIMOTO D60W150ST-DN The scope of delivery includes: Workshop cabinet with machine accessories Indexable inserts Turning tools Tool holders Ncjdpfx Asyxb Hiebvop Clamping jaws Selection of screws

Condition: used, maximum load weight: 33,360 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 6,000 mm, loading space volume: 29 m³, total width: 2,470 mm, total height: 3,900 mm, Year of construction: 2025, Equipment: ABS, D-TEC 3-axle container chassis 20 FT ADR with VANHOOL single-chamber pressurized tank, 29 cbm First registered April 2025 Tank container built in 2006 Unladen weight 5,640 kg Steel chassis, fully spray-galvanized and painted in 2-layer RAL 9005 Fifth wheel height 1,180 mm Tires: 6 x 385/65 R 22.5 Hankook High-gloss aluminum rims Nsdpfx Asyxb Hcsbvscp All-LED lighting, round rear headlights 2 x LED work lights SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE KNORR Trailer EBS VANHOOL 20 FT tank container, V2A stainless steel Single-chamber 29,362 L volume Test pressure 2.86 bar Operating pressure 2 bar Door cover DN500 Outlet at the rear center of the stainless steel casing RENTING is the new BUYING. Rental or full-service leasing is available immediately.-----

Condition: used, maximum load weight: 30,690 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2023, next inspection (TÜV): 09/2026, loading space length: 15,440 mm, loading space width: 2,550 mm, loading space height: 770 mm, total width: 2,550 mm, total height: 770 mm, Year of construction: 2023, Equipment: ABS, 3-axle semi low-loader KÄSSBOHRER, extendable, first registration as new. Fifth wheel height: 1,150 mm Overall length: 13,190 mm Telescopic sliding platform, width: 300 mm Ncjdpfxsyxb E Ss Abvsp Gooseneck length: 3,950 mm Low bed length: 9,240 mm + telescopic extension: 6,200 mm Loading height (low bed): only 770 mm Unladen weight: approx. 11,317 kg Chassis partially metallized visible parts BPW axles with drum brakes 1st axle: lift axle 3rd axle: trailing steering axle WABCO EBS with rollover stability support (RSS) 12x 205/65 R 17.5 MICHELIN tires Oversize package up to 3,000 mm width Aluminum approach ramps, width: 600 mm, length: 2,400 mm, load capacity up to 32 tons Lashing rings: 6 pairs, load capacity 10 tons (heavy-duty) 8 pairs, load capacity 5 tons 6 pairs, load capacity 8 tons 1x long material rack Large toolbox at the front, behind the bulkhead, transverse to the direction of travel (LxWxH): 600 x 830 x 2,310 mm RENTING is the NEW BUYING – also available immediately with our full-service rental!

Condition: used, maximum load weight: 34,725 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper, 50 cbm, "X-Shape" First registered October 2024, like new condition Dimensions (L x W) (LxWxH) 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Curb weight only 7,275 kg Z-chassis, offset design Floor made of 5 mm Hardox HB450 steel Front wall and side walls made of 4 mm Hardox HB450 steel Sloping front wall, with access inside Double-leaf portal doors, pneumatic re-locking 1 grain pusher in the right door leaf Reinforced roll-top tarpaulin, central locking HYVA tipping ram type Alpha, suitable for high and low pressure Aluminum fifth wheels, full load 2 pneumatic vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with traction assist WABCO Trailer EBS with anti-skid system RSS WABCO Smartboard, Automatic tipping lowering Lifting and lowering device Tires: 385/65 R 22.5 Ncjdeyxb E Espfx Abvsp ALCOA Dura-Bright high-gloss alloy wheels Aluminum leaning ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, also available from us as a FULL-SERVICE RENTAL.

Condition: new, mileage: 6 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: red, gearing type: mechanical, emission class: euro6, number of seats: 5, Year of construction: 2025, Equipment: ABS, central locking, electronic stability program (ESP), navigation system, Renault Master AKX NEW MODEL 170 HP Euro 6 STX 5-Seater Extra Long 1-2 Horse Transporter HARAS - Stallion Equipment Vehicle: - 170 HP Renault Master chassis, EURO 6E, leather trim Ncodpfsyxb Exox Abvjp - Air conditioning - 5 seats - Radio-CD navigation system - Bluetooth hands-free system - Tow bar - Cruise control - Multifunction steering wheel Horse compartment: - Soft rubber flooring - COMPLETE STALLION EQUIPMENT with high partition wall, separate doors in front of each horse - Fully adjustable partition wall, e.g., for mare and foal - Roof fan - Roof hatch - LED day/night lighting - Enclosed storage boxes in the alcove - Saddle and bridle holders - Tack room with storage compartments Available as optional equipment: - Camera system, reversing and horse monitoring camera €1,500 - Automatic transmission €3,400 - Alloy wheels €1,250 - Additional coil springs - Winter tires - Shelving system in tack room €150 per shelf Subject to errors/omissions and prior sale. Further images available on request. - EXPORT NET SALE POSSIBLE - Attractive leasing offers Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all makes in the field of horse transporters and trailers. Please schedule an appointment in advance with Richard Theurer or Andreas Theurer.