Dione Beauty Kft

Condition: not inspected (used), machine/vehicle number: XMS00835,

Condition: excellent (used), Year of construction: 2002, power: 35 kW (47.59 HP), cutting height (max.): 115 mm, overall weight: 2,000 kg, SCM M3 multirip saw Very good condition Hsdpfxozu Aczs Albonr Tape like new

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry portal for coil line with Trumpf TCF 1 laser + GSW AG coil mandrel MHR 2.5 / 1250 + straightening machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 robot The system is in operation until calendar week 35. The system has been continuously maintained and partially overhauled in 2022. The sale includes the system, but excludes the extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. output power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability with respect to rated power: ±2 % Beam diameter at the beam output: 26 mm Divergence angle (half-angle): 0 mrad Beam profile: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Coil mandrel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outside diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and speed Speed: approx. 17.5 rpm Electrical drive power, auxiliary drive: 1.1 kW Electrical connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening machine VRMA 80 / 76 Pass width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roll diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Working height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Hedpfxezu Aa He Albsnr Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positional repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist roll): ±200° B-axis (wrist bend): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s

Condition: used, Year of construction: 2017, The Resato ACM 2040 is a high-pressure abrasive waterjet cutting system designed for precision cutting of metals, composites, stone, glass, plastics, and other materials. The machine features a cutting area of approximately 2,020 × 4,020 mm and operates with a Resato PJ-4-4000 high-pressure pump capable of delivering up to 4,000 bar pressure and 3.8 l/min flow rate. The system provides high cutting accuracy, minimal heat-affected zones, and is suitable for complex shapes and thick materials. Key specifications: - Technology: Abrasive Waterjet Cutting - Cutting area: 2,020 × 4,020 mm - Maximum pressure: 4,000 bar - Pump capacity: 3.8 l/min at 3,800 bar - Pump power: 30 kW - Year of manufacture: 2017 - Application: Precision cutting of metal, stone, glass, plastics, and composites Available : 12/2026 Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Hsdpfx Ajzuz Txjlbonr Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! * Technology: Abrasive Waterjet Cutting * Cutting area: 2,020 × 4,020 mm * Maximum pressure: 4,000 bar * Year of manufacture: 2017 * Pump power: 30 kW Working hours: 8683 Available: 12/2026

Condition: used, Year of construction: 2018, Dust extraction system Manufacturer: Nawara Type: RUBIN 2030 Year of manufacture: 2018 Technical data Application: - Designed for the extraction of dry dust and wood shavings - Suitable for woodworking and industrial dust extraction Hodezuz S Uspfx Albonr Performance: - Airflow rate: approx. 30,000 m³/h System features: - Stationary modular filter system - Warm air recovery system (summer/winter operation with adjustable damper) - Designed for continuous operation Compliance: - Complies with EU Machinery Directive 2006/42/EC - Complies with ATEX Directive 2014/34/EU (for potentially explosive atmospheres) - Meets the relevant Polish regulations on machine safety Air lock / discharge system: - Type: SL 1400 EX - Length: 1400 mm - Height: 360 mm - Connecting frame (top/bottom): 1490 x 420 mm - Drive type: Direct drive with elastic coupling (Rotex 38) - Gear motor: SEW R47 DRN80MK4 (Option: DRN90S4) - Speed: 15 rpm (Option: 29 rpm) Electrical data: - Power supply: 380 V / 50 Hz Dimensions (air lock unit): - L W H: 2000 x 420 x 360 mm Installation: - Complete external filter system included in the scope of supply - Internal piping within the factory included in the scope of supply, but subject to separate negotiations Note: The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, Shredder Manufacturer: Masur Type: LZ 800 Year of manufacture: 2003 Technical data Rotor speed: 284 rpm Rotor diameter: 370 mm Infeed width: 800 mm Hedpozuz S Iofx Albsnr Infeed height: 500 mm Drive power: at least 22 kW Weight: 1900 kg Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Packaging system Hjdpfxjzuz Sue Albsnr Manufacturer: Mosca

Condition: used, Year of construction: 2018, - Length: 220 cm - Width: 150 cm - Height: 35 cm Shrink film packaging system Manufacturer: Erregi Type: 300 LP Year of manufacture: 2018 This film packaging system with a shrink tunnel from the manufacturer Erregi is used for the automated packaging of products in shrink film. It offers precise control of temperature and air circulation, ensuring uniform shrinking at high efficiency. Two conveyor tables are located before and after the machine, enabling smooth material flow and ergonomic handling during the packaging process. Technical data: - Voltage: 400 V, 50 Hz - Feed rate: 15 m/min - Weight: 1300 kg (without conveyor tables) External dimensions - Length: 12 m Hnjdpfx Aozuz Shjlbjr - Width: 4 m - Height: 2.5 m Workpiece dimensions - Length: 220 cm - Width: 150 cm - Height: 35 cm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), 2 units available. For sale is a high-quality GARANT LCV 125 G chuck for professional use on CNC machining centers. This chuck impresses with its high clamping force, precision, and optimal accessibility, making it ideal for 5-axis machining as well as complex milling operations. Technical features: Manufacturer: GARANT Type: LCV 125 G Jaw width: 125 mm High clamping force with a compact design Precise workpiece positioning Ideal for 5-sided and 5-axis machining Robust industrial design Advantages: High repeatability Optimal accessibility for milling tools Reduced setup times Safe and vibration-dampened workpiece clamping Suitable for single-part and series production Condition: Hedpfx Aljzuz R Rebsnr Used, fully functional. Normal signs of wear from industrial use.

Condition: used, Stanzautomat für Kalender und Notizbücher / Punching Machine for Calender and Notebooks Stanzautomat / Calender - Block Punching Machine Plastograph PZ 599 Baujahr / Year 1998 Arbeitsbreite / Working width 120 - 600mm Papierlänge / Paper length 100 - 550mm Arbeitsbreite min. 95mm - max. 600mm Hubzahl einstellbar / number of Strokes adjustable 30 - 120/min. Flachstapelanleger / Flat Pile Feeder 5 Stanz-Formen / 5 Punching Tools: Types Wire-O 2:1 / 3:1 - Plastik-Effekt / 3:1 4x4mm / 3:1 4x6mm Werkzeug 4x4mm mit Daumenstanzung / Tool 4x4mm with calender hole punch Auslage Rüttler / Delivery Jogger Hjdpfjzuz R Djx Albsnr Panel Operation and Controls Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2015, Shredder Manufacturer: Gross Type: GAZ62 Year of manufacture: 2015 Technical data Motor: 18.5 kW Speed: 91 1/min Voltage: 400 V Frequency: 50 Hz Weight: 1.3 t Note: Hnjdpfxjzuz Rke Albjr The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, rack trolley Hodpfxszuz Rdo Albonr

Year of construction: 2005, condition: used, - max. 28 cycles/min for single stacks - max. 50 sheets/min when collecting sheets in the direction of travel, with several sheets arranged one behind the other - max. 50 sheets when collecting 2 sheets on top of each other (special version of the infeed belt conveyor) Used destacking unit Manufacturer: Meinert Type: AM 33 - 3000 /1300 Systems Year of manufacture: 2005 Technical data - max. 28 cycles/min for single stacks - max. 50 sheets/min when collecting sheets in the direction of travel, with several sheets arranged one behind the other - max. 50 sheets when collecting 2 sheets on top of each other (special version of the infeed belt conveyor) Design - Infeed belt conveyor in front of the system (special version: pneumatically adjustable for collecting 2 parts on top of each other) - Infeed belt conveyor in the paternoster - 2 paternoster walls – fixed side and motor-adjustable loose side - Synchronized stop adjustment – infeed and stacking positions AM 33: 2 stacking positions on one lifting device with powered roller conveyor - Personnel protection consisting of safety grilles and automatic sliding gates Hnedozuz N Tjpfx Alber - Control cabinet according to VDE regulations - PC control in a separate PC cabinet Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, 4-roll feed unit Manufacturer: Steff Technical data - Feed rate: 6.5 - 33 m/min Hjdpozuz N Hefx Albjnr Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, Year: 2010 Condition: very good Hnjdpfxjzuz Nte Albjr

Year of construction: 2019, condition: used, Chain crane with trailer Manufacturer: TGT Type: Robby 900 XL Hedezuz Ngopfx Albenr Year of manufacture: 2019 Technical data - Palfinger crane 1500 - Forklift lift of 1.8 m - Outriggers fully hydraulic - with KTL coating - installed on a crawler chassis - telescoping chassis width - Working height: approx. 6.5 m - Tare weight: approx. 1700 kg - Fork load capacity: 2000 kg - Crane load capacity: up to 900 kg - Quick-change system for switching between crane and forks - Honda engine Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 1987, 4-roller feed mechanism Manufacturer: Schneider Hnsdpfx Alezuz Najber Type: V4N Year of manufacture: 1987 Technical data - Feed rate of 4 - 22 m/min Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Components of a sawing system Manufacturer: Linck Type: VZM & CSMA consisting of: CSMA extraction device Manufacturer: Linck Type: Av / CSMA Year of manufacture: 2018 The CSMA extraction device offers powerful and flexible material handling in automated production lines. It is designed for variable workpiece sizes and ensures continuous material transport. Technical data - Drive power: 4 x 4 kW - Feed rate: 85 m/min Hsdezuz I Nepfx Albonr VZM centering device Manufacturer: Linck Type: VZM The VZM centering device is designed for precise centering tasks at high feed rates. The robust design allows it to be used under demanding industrial conditions. Technical data - Drive power: 2 x 7.5 kW - Feed rate: 84 m/min Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Infeed and destacking Manufacturer: Wamhoff Infeed Hedpfx Aezuz I Aelbonr Manufacturer: Wamhoff Automatic destacking Manufacturer: Wamhoff Year of manufacture: 2008 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Column drilling machine / GILLARDON GB 20 from a university - Stepless speed control - Adapted for MK 3 - Drilling capacity in steel max. 30mm - Arm length 285mm - Drilling stroke 150mm - Table clamping surface 400x400mm - Table height adjustment approx. 650mm - Drilling depth stop - Analog speed indicator - Emergency stop - Work light - Foot switch - Documentation Dimensions: L x W x H 0.7 x 0.6 x 1.8 meters / Weight 650 kg Hsdpfx Aezuz Iislbsnr Errors and omissions excepted.

Year of construction: 2018, condition: used, - Robot axes: 6 - Reach: 4683 mm - Payload: 1700 kg Industrial robot with conveyor system and safety fence Manufacturer: Fanuc Type: M-2000iA/1700L Year of manufacture: 2018 Technical data - Robot axes: 6 Hedpszuz Icsfx Albonr - Reach: 4683 mm - Payload: 1700 kg Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 2021, condition: used, Tube manufacturing line Manufacturer: Bazhou Wanxin Industrial and Trading Tube manufacturing line consisting of: Double-station unwinding device Function: Unwinds the coil passively Design: 2-station design with 180-degree rotation, manual expansion Hnodpfxozuz H Se Albjr Advantages: Fast loading, simple and convenient operation Hydraulic shear and butt welding machine Function: Cuts off the front and rear ends, centers the strip, and welds the strip back together Design: Manual hydraulic shear with cantilever, front and rear pressure rollers, front and rear centering rollers, welding device Cutting method: hydraulic shear Press material method: double-cylinder press Welding method: manual welding Strip storage device Function: To ensure continuous production of the welded tube, a storage unit must be installed after the shear and butt welding platform so that the storage unit can continuously feed the strips while the strip steel material is prepared for stacking, unwinding, butt cutting, and welding. Design: Frame type, with moving and fixed frames (including feeding device) Feeding speed: max. 120 m/min Storage speed: max. 200 m/min Length of stored strips: 200 - 400 m Pinch roller motor: AC 11 kW Forming and sizing machine Working height: +850 mm Power: AC/DC motor: 160 kW, 1000 - 2000 rpm Reducer: Gear hardening Arrangement: Passive five-roll straightening machine, vertical rolls for feeding material, forming through 7 horizontal roll stands and 8 vertical roll stands, guiding, pressing, deburring, cooling, and sizing through 6 horizontal roll stands and 5 vertical roll stands, 1 round sizing stand Round sizing stand: 1 set of smoothing device, two sides with 8 rolls each, 4 rolls per side. 30 mm, 40cr, quenching, tempering, and hardening Horizontal roll shaft: 60 mm, bearing at position 55, made of material 40Cr Heat treatment of horizontal roll: surface hardening, HRC 50-55 Bearing guide: forged steel 45# Vertical roll shaft: 40 mm, material 40Cr, quenched, tempered, and hardened Vertical and horizontal rolls - Design: Portal design, opening width: 120 mm, clamping of horizontal roll stand: adjustment via worm gear Material of horizontal and vertical roll stands: welded (aging annealing) Gearbox: Gear: Spiral bevel gear Shaft of pinch roll: 50 mm, 2 rolls for pinching, adjusted via a manual screw rod Guide shaft: 40 mm Deburring knife: 2 pcs., one for working and one as a spare Cooling tank Cold cut-off saw Function: The cold cut-off saw is one of the most important machines in the ERW tube line. It can cut the tubes to the preset length during high-speed production. Type: KK-5-50 Tube diameter: Round tubes 16-63.5 mm and corresponding square and rectangular tubes Length cut: any length between 1 - 6 m Material thickness: 0.6-2.5 mm Drive motor: 11 kW servo Yaskawa Feeding motor: 2.9 kW serco Yaskawa Saw motor: 11 kW, AC motor with frequency converter Feeding method: Servo multi-stage speed feed Speed adjustment: max. 110 m/min Clamping force: pneumatic Drag chain Saw blade: 400 mm Saw gearbox model: KK-80 Saw stroke (device length): 3 m Device dimensions: 4500 x 1500 x 1300 mm Conveyor track, table, and packaging machine Function: The formed tubes are automatically removed from the roll.

Condition: used, Shelving Hsdpfx Aozuz Hrjlbjnr One ladder, 800mm deep, length: 4000mm, 40kg One support beam with 3 mounting hooks, 2700mm long, 3 pallet spaces, 1000kg/pallet, 24kg One support beam with 3 mounting hooks, 1800mm long, 2 pallet spaces, 1000kg/pallet, approx. 12kg Available: 147 ladders, sufficient number of 2700mm support beams, limited number of 1800mm support beams.

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm Hedpfxszuz Hle Albonr - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR15 / DAR 12 Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Min. veneer sheet length (grain direction): 350 mm Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: Hnsdpfxezuz Hfj Albjr The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.