Kvmt

Condition: good (used), Year of construction: 1998, Ref. -No.: 10661 Manufacturer: MAZAK Type: SQT 200 MS Tedpfo Ahkylsx Abued Year of construction: 1998 Type of control: CNC Control: Mazatrol Fusion 640T Storage location: Halberstadt Country of origin: Japan Turning Speeds: 6000 RPM Swing Dia.: 525 mm Turning Diameter: 300 mm Turning Length: 500 mm Spindle Speeds: 5000 RPM Spindle Bore: 51 mm Spindle power: 18,5 kW Turret places: 1 Pcs Tool places: 12 Machine length: 3023 mm Machine width: 1700 mm Machine Height: 1999 mm Weight Of The Machine Ca.: 5,3 t Pole work up to max.: 51 mm Further information: - The Mazak SQT 200 MS is built for durability and reliability - Its design ensures stability and precision during machining, even at high speeds or during long production runs. - This model features powered tools and C-axis capabilities - This model is typically equipped with the Mazatrol Fusion 640T CNC control. The machine can be viewed while powered on by appointment.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, overall weight: 6,500 kg, CNC MSX 501 MAPPS II Opposed-spindle machine. Spindle size A2-6, twin spindles. 2 stacked turrets. 9-axis controlled turning and milling center. 2 turrets. Y-axis upper turret. 2 C-axes. Bar capacity: 65 mm. T wo integrated 15 kW motors. Tool life management and tool wear monitoring. Mapps 4 conversational automatic programming system. Automatic force control and tool wear monitoring. Oil cooler for both spindles. 340 Nm cutting torque. 15-position turret, all positions motorized. Automatic workpiece collector. Bar loader LNS SPRINT S3 Interface for bar loader installation. Rear automatic part pick-up with a special gripper for long parts. Max. turning diameter: 320 mm. Turning length: 810 mm. Max. distance between main spindle and counter spindle: 920 mm. Main spindle speed: 5000 rpm. Counter spindle speed: 5000 rpm. X1 travel: 210 mm. Y1 travel: +50 / -50 mm. X2 travel: 210 mm. Counter-spindle travel: 920 mm. Number of powered tool stations: 2 x 15. Capable of holding 30 tools per turret. Large selection of external and internal tool holders. Large selection of axial and radial motorized blocks. Speed range of powered tools: 5.000 rpm. Drive motor for powered tools: 5.5 kW. Rapid traverse X1, X2: 25.000 mm/min. Rapid traverse Y1: 20.000 mm/min. Rapid traverse Z1, Z2: 30.000 mm/min. C-axis resolution: 0.001°. Collet chuck on main spindle. Self centering chuck on counter spindle Tjdpe Ahkb Defx Abuod External and internal tool holders. Motorized axial and radial blocks. Communication ports via USB, PCMCIA card, and RS-232. Rear chip conveyor. Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. Machine in very good condition. Machine weight 6.5 tons. Machine available for inspection while in operation.

Condition: excellent (used), Year of construction: 2009, operating hours: 18,493 h, functionality: fully functional, Base machine CTX alpha 500, driven tooling, G-axis, measuring probe in X-axis Control system: Siemens CNC control system SIEMENS 8400 ERGOLine Options Opposing spindle ISM as. C, Y-axis, instead of tailstock Coolant and chip disposal Coolant system 8/20 bar, 600 L, band filter Coolant spray gun Equipment for bar machining Package for bar machining CTX alpha 52 mm Main spindle reducing sleeve Short bar loader magazine, IRCO, ILSRBK 100/12 Clamping device for main spindle 3-jaw chuck, BBD 21066, manufacturer SMW Collet chuck KSZCC 60, manufacturer SMW Clamping device for opposing spindle Collet chuck KSZCC52, manufacturer SMW 3-jaw chuck, BBD 170-52, manufacturer SMW Documentation Documentation, delivery list, technical documentation DMG Powertools DMG Netservice - on board Special designs Swiveling scraper for chip conveyor, manufacturer Bürener, SP63/30225 Tool spindle, 90° angular geared double spindle head, 2 pieces, 105465 Drill bar holder, 6 pieces, 085822 Multiple holder, form 2, 1 piece, 114008 Tedpfs Ahi Ngsx Abujd 4-fold holder for Y-machine, 1 piece, 1530200Y Multiple holder, form D130x20, 4 pieces, 114013 Reducing sleeve, 8 mm, 2 pieces, 100244 Reducing sleeve, 10 mm, 2 pieces, 100245 Reducing sleeve, 12 mm, 2 pieces, 100246 Reducing sleeve, 20 mm, 3 pieces, 100248 Reducing sleeve, 25 mm, 2 pieces, 100249 90° adapter, left, 2 pieces, 0E5390 90° adapter, right, 2 pieces, 085407 Cylindrical shank holder, form E230X25, 1 piece, 113985 Tool holder with cylindrical shank, form E3/E430x25, 4 pieces, 113880 Actuating key for dovetail, nut ER25, 1 piece, 105762 Collet chuck holder d=32, ER25, 2 pieces, 107846

Condition: excellent (used), EMCO Hyperturn 690 MCplus Tjdpfx Ao Ahizgsbusd

Condition: excellent (used), Year of construction: 2017, HURCO TMM 8 i Tjdo Ahiu Nopfx Abued CNC turning machine with powered tools Year of manufacture: 2017 Spindle operating hours: approx. 4100 h

Condition: used, Year of construction: 2003, 2003 Mazak Mega Turn A16N M/C CNC Vertical Turning Centre with Elevating Bridge, 'C' Axis & Mazatrol PC-Fusion Control Tjdpfxj Ahg Tfs Abusd Independant Ø1,600mm 4 Jaw Chuck. Maximum Swing Ø2,030mm. Maximum Table Load 12,000kg. Maximum Turning Height 1,828mm. Ram Travel 'Z'=1,067mm, 'X' Travel 599mm (Right), 1,016mm (Left). Cross Rail Travel 762mm. Maximum Table Speed 230rpm. Milling Spindle Maximum Speed 1,100rpm. 30 Position ATC. S/No. 163418 2 (2003). Note: Has Crossrail & Parameter Issue. With Chip Conveyor & Coolant System. Weight 32,300kg.

Condition: excellent (used), Year of construction: 2024, 2024 Mazak Integrex J-200S 5-Axis Multi-Tasking CNC Lathe With Mazatrol Smooth G Control Main Spindle Hainbuch Ø215mm 3 Jaw Power Chuck, Sub Spindle Kitagawa B-208 3 Jaw Ø210mm Power Chuck. Maximum Swing Ø530mm. Maximum Swing Over Cross Slide Ø530mm. Maximum Machining Ø500mm. Maximum Bar Working Capacity Main Spindle Ø65mm, Sub Spindle Ø51mm. Maximum Machining Length 910mm. Maximum Support Weight Main Spindle Chuck Work 200kg, Maximum Support Weight Sub Spindle Chuck Work 200kg. Axis Travel 'X'=450mm, 'Z'=1,119mm, 'Y'=200mm, ,W,=1,436mm, 'B'=–30° To 210° (5° Increment'), C'=0.0001° Increment. Rapid Traverse 'X'=40m/min, 'Z'=40m/min, 'Y'=40m/min, 'W'=30m/min,C'=555rpm. Main Spindle Speed Range 35-5,000rpm (11kW Motor). Main Spindle Nose JIS A2-6”. Spindle Bore Ø76mm, Sub Spindle Speed Range 35-5,000rpm (11kW Motor). Main Spindle Nose JIS A2-5". Maximum Milling Spindle Speed 12,000rpm (7.5kW Motor). 72 Position ATC. Spindle Nose Capto C6. Turning Tool Shank 25mm², Boring Bar Ø40mm, Maximum Tool Ø125mm, Maximum Tool Length 210mm. Power Requirement 35.34kVA. Power On Hours 2,127. S/No.354479 (2024). NOTE: A loading fee will be added to buyer's invoice of £100 + VAT. Todj Ahg S Ejpfx Abued With Through Coolant System, Cromar Chip Conveyor, Habor HBO-750PTSBM8 Oil Cooler, Habor HJ-400PSBM2 Oil Cooler, GTI GT 10L Slim Oil Mist Extractor, Parts Cathcher, Foot Switches, Signal Tower, Tooling Package (Consisting Of Kitagawa B-208 3 Jaw Ø210mm Power Chuck, Hainbuch Collets & Assorted Tooling) & Manuals (CD). Overall Machine Dimensions L3,790 x W2,420 x H2,500 mm. Weight 9,800kg.

Condition: used, Year of construction: 2006, 2006 DMG Gildemeister GMX 400 Linear Multi-Tasking Twin Spindle CNC Lathe With Siemens 840D Control & Pneumotec Gantry Parts Loading System With Dual Rohm KUBF-400/4 Ø400mm Power Chucks. Swing Ø640mm. Maximum Turning Ø640mm. Maximum Turning Length 1,500mm. Axis Travel 'X1'=550mm, 'Y'=220mm, 'Z1'=1,585mm, 'X2'=225mm, 'Z2'=1,400mm, 'Z3'=1,500mm, 'B'= ±120°. Rapid Travere 'X'=40m/min, 'Y'=24m/min, 'Z'=60m/min. Spindle Bore Ø107mm. Maximum Bar Capacity Ø92mm. Maximum Main Spindle Speed 4,000rpm (45kW Motor). Maximum Sub Spindle Speed 4,000rpm (45kW Motor). Maximum Rotary Spindle Speed 12,000 (22kW Motor). Rotary Spindle Taper Capto C6. 60 Position ATC. 12 Position Sauter Turret. 20 Position Loading Station With Air Blast Cleaning Tank. S/No. 07500001331 (2006). With Coolant Paper Filtration System, Chip Conveyor, IFM Mist Extraction Unit, Oil Chiller, Automatic Doors, Foot Switches, Wash Gun, Handwheel, Signal Tower & Manuals. Overall Dimensions L9,347 x W4,646 x H3,018mm. Weight 24,000kg. Tsds Ahg R Sopfx Abued

Condition: good (used), Year of construction: 2006, operating hours: 1,716 h, functionality: fully functional, turning length: 1,500 mm, turning diameter: 420 mm, Equipment: documentation/manual, Used Mazak Quick Turn Nexus 350 M machine, standard configuration with a 15" Kitagawa three-jaw chuck and a center distance of 1500 mm, maximum turning diameter of 420 mm. Tedpfx Abj Ahgkpeusd Power on: 4936 hours, operating hours: 1736 hours. No unusual noises detected. Maintained and serviced by Mazak in February 2026. The machine is in excellent condition and comes with a large number of tools.

Condition: excellent (used), Year of construction: 2017, operating hours: 13,426 h, functionality: fully functional, type of input current: three-phase, 7 axes: X1, X2, Y1, Z1, Z2, C1, C2 - High rigidity and high precision - Y-axis - 2 spindles, 1 turret (8 stations plus half-index positions) - Superimposition function (synchronized, simultaneous machining): Coordinated operation of the main spindle, sub-spindle, and turret enables overlapping machining operations, significantly reducing cycle times and increasing productivity. Todpfxj Ahdrgs Abujd - 173E collet chuck on the main spindle and 171E collet chuck on the sub-spindle - Maximum spindle speeds: main spindle 6,000 rpm; sub-spindle 5,000 rpm - Mitsubishi M70V CNC control - Maximum bar capacity: 42 mm - Maximum driven-tool speed: 6,000 rpm

Condition: excellent (used), Year of construction: 2018, operating hours: 3,843 h, functionality: fully functional, machine/vehicle number: 320000620, turning length: 1,240 mm, turning diameter over cross slide: 480 mm, turning diameter: 480 mm, spindle motor power: 33,000 W, spindle speed (max.): 3,250 rpm, spindle bore: 115 mm, travel distance X-axis: 307 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, mount diameter: 315 mm, rotational speed (max.): 3,250 rpm, rotational speed (min.): 20 rpm, torque: 630 Nm, bar passage: 102 mm, workpiece weight (max.): 150 kg, feed rate X-axis: 30 m/min, feed rate Y-axis: 22 m/min, feed rate Z-axis: 36 m/min, total height: 2,150 mm, total length: 4,800 mm, chuck outer diameter: 315 mm, total width: 2,100 mm, collet bore: 102 mm, bar diameter (max.): 102 mm, quill stroke: 120 mm, quill diameter: 100 mm, quill travel distance: 1,200 mm, swing diameter over cross slide: 480 mm, spindle nose: A2-8, swing diameter over bed slide: 700 mm, overall weight: 7,200 kg, spindle diameter: 140 mm, tool length: 250 mm, feed force X-axis: 7,000 N, feed force Y-axis: 7,000 N, feed force Z-axis: 11,000 N, turning diameter over bed slide: 700 mm, Equipment: rotational speed infinitely variable, For Sale: DMG MORI CLX 550 CNC Lathe (Model 2018) High-performance 4-axis turning center in excellent condition, ideal for heavy-duty and precision machining. Equipped with key factory options for maximum efficiency and versatility. Control System & Software: CNC Control: DMG MORI SLIMline® 19" Touch Control with Siemens 840D sl Operate Software Option: Integrated DXF Reader for fast, direct import and programming of 2D CAD files Key Technical Specifications & Features: Year of Manufacture: 2018 Control Unit: 4-Axis Configuration Bar Passage / Capacity: Extended Ø 102 mm passage option Spindle Speed: Up to 3,250 rpm Spindle Torque: 630 Nm (40% ED) Turning Capacity: Max. turning diameter Ø 480 mm | Max. turning length 1,240 mm | Swing over bed Ø 700 mm Tailstock Setup: Includes base and hydraulic interface preparation for steady rest Included Accessories & Tooling Package: Tool Setter (Automatic tool measuring probe) Part Catcher & Bar Puller Bar Feeder Interface / Preparation Driven Tooling Included: Todj Agvvgjpfx Abuod 1x Angular Driven Tool Holder (90°) 4x Straight Driven Tool Holders Collet Chucks: 2x ER32 & 2x ER40 Clean, well-maintained machine ready for immediate production.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 90,842 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 555 mm, total height: 1,950 mm, total width: 2,220 mm, overall weight: 6,500 kg, product length (max.): 4,770 mm, number of axes: 6, This 6-axis Gildemeister MF twin 65 turn-mill centre was manufactured in 2001. It features a swing diameter of 240 mm and a normal turning diameter of 200 mm. The machine offers a spindle distance of 800 mm and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister MF twin 65 turn-mill centre we have for sale. Contact us for further details. TECHNICAL SPECS:- Bed Design: 45° slant bed, roller guide ways- Swing Diameter: 240 mm- Normal Turning Diameter: 200 mm- Spindle Distance: 800 mm- Slide 1 X/Z Travel (Cross/Longitudinal): 190 / 555 mm- Slide 2 X/Z Travel (Cross/Longitudinal): 190 / 555 mm- Slide 1 Y-Axis Travel : 40 mm- Spindle 2 Longitudinal Travel: 600 mm- Main Spindle 1 (Left): - Chuck Diameter: 200 mm - Max Bar Capacity: 65 mm - Spindle Head Flat Flange: 170 h5 - Spindle Bore: 79 mm - Draw Tube Inner Diameter: 66 mm - Front Bearing Diameter: 120 mm - Drive Power (40/100% ED): 28 / 21 kW - Speed Range: 25 - 5000 rpm (min⁻¹) - Knee Speed: 850 rpm (min⁻¹) - Max Torque (40/100% ED): 320 / 240 Nm - Drive Type: AC / 1 (ISM) - C-Axis Rapid Traverse: 250 rpm (min⁻¹) - C-Axis Holding Torque: 200 Nm - C-Axis Indexing Accuracy: 0.025°- Counter Spindle / Main Spindle 2 (Right): - Chuck Diameter: 200 mm - Max Bar Capacity: 42 mm - Spindle Head Flat Flange: 140 h5 - Spindle Bore: 56 mm - Draw Tube Inner Diameter: 44 mm - Front Bearing Diameter: 90 mm - Drive Power (40/100% ED): 18 / 14 kW - Speed Range: 31 - 6300 rpm (min⁻¹) - Knee Speed: 1000 rpm (min⁻¹) - Max Torque (40/100% ED): 130 / 173 Nm - Drive Type: AC / 1 (ISM) - C-Axis Rapid Traverse: 250 rpm (min⁻¹) - C-Axis Holding Torque: 120 Nm - C-Axis Indexing Accuracy: 0.025°- Slide 1 (Upper): - Rapid Traverse X/Z: 20 / 30 m/min (without Y-axis) or 20 / 7.5 / 30 m/min (X/Y/Z with Y-axis) - Feed Force X/Z: 4 / 7 kN - Path Resolution: 0.001 mm - Ball Screw Pitch x Diameter: 12x28 / 15x32 mm (without Y) or 12x28 / 5x32 / 15x32 mm (with Y)- Slide 2 (Lower): - Rapid Traverse X/Z: 20 / 30 m/min - Feed Force X/Z: 4 / 7 daN (kN) - Path Resolution: 0.001 mm - Ball Screw Pitch x Diameter: 12x28 / 15x32 mm- Slide 3 (Spindle 2 Z-Movement): - Rapid Traverse A: 30 m/min - Feed Force A: 7 kN - Path Resolution A: 0.001 mm - Ball Screw Pitch x Diameter: 15x32 mm- Tool Turrets (Upper and Lower): - Number of Tool Stations: 2 x 12 - Tool Shank Diameter (DIN 69880 / VDI): 30 mm - Driven Tool Stations: 2 x 12 - Driven Tool Power (40/100% ED): 5 kW - Driven Tool Max Torque (40/100% ED): 16 Nm - Driven Tool Speed Range: 40 - 4000 rpm (min⁻¹)- Electrical Data: - Voltage: 400 V (3-phase, 50 Hz) - Connected Load: 65 kVA - Rated Current: 95 A - Back-up Fuse: 100 A - Auxiliary Voltages: 230 V / 24 V=- Hydraulics System: - Tank Capacity: approx. 25 L - Pump Power: 2.2 kW - Max System Pressure: 80 bar - Clamping Device Pressure: 80 bar- Coolant System & Filtration: - Tank Capacity: 200 L - Pump Power: 1.65 kW - Delivery Volume at 6 bar: 50 L/min - Equipped with band/paper filtration unit- Machine Dimensions & Weight: - Total Length (with Chip Conveyor): 4770 mm - Total Depth (with Electrical Cabinet): 2220 mm - Total Height (with Electrical Cabinet): 1950 mm Technical Specification Counter Spindle Yes Driven Tools Yes Tjdpfx Abs Agvbqeujd

Condition: excellent (used), Year of construction: 2017, operating hours: 700 h, functionality: fully functional, turning length: 710 mm, turning diameter over cross slide: 380 mm, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 190 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 710 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, total height: 1,825 mm, total length: 3,385 mm, total width: 1,760 mm, overall weight: 5,750 kg, Equipment: documentation/manual, TOUR CNC 4 AXES MAZAK MAZATROL SMOOTH C YEAR 2017 CHUCK DIAMETER: 210 mm MAX. MACHINING DIAMETER: 380 mm SPINDLE BORE: 76 mm BAR MACHINING: 65 mm SPINDLE SPEED: 5000 rpm TURRET TOOL SPEED: 5000 rpm 12-TOOL TURRET CHIP CONVEYOR ROBOT INTERFACE AUTOMATIC DOOR 3-COLOR LAMP MIST EXTRACTOR WEIGHT: 5750 kg Tedpfxe Agvads Abusd 8 fixed tool holders 3 rotating tool holders

Year of construction: 2026, operating hours: 1,130 h, condition: like new (used), turning diameter: 400 mm, bar passage: 65 mm, spindle nose: HSK-T 63, turning length: 1,100 mm, CNC Turning and Milling Center Manufacturer: DMG MORI Type: CLX 450 TC with Robo2Go Year of manufacture: 2026 Control system: Celos X with Siemens Sinumerik One Technical data: Max. turning diameter: 400 mm Turning length: 1100 mm Bar capacity: max. 65 mm Travel ranges: X-axis travel: 276 mm Z1-axis travel: 755 mm Z3-axis travel: 775 mm Y-axis travel: +/- 100 mm B-axis travel: +/- 120° Main spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Counter-spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Milling spindle: Speed: 0 – 12,000 rpm Drive power: 8.8/10.5 kW Tool holder: HSK-T 63 Tool changer: 60 positions Max. torque: 73/90 Nm Hollow clamping device: Ø 67 mm Operating hours: approx. 1,130 h Spindle hours: approx. 280 h Technical features & accessories: - Absolute, direct position measuring systems in X- and Y-axes - Dual changeover filter - Counter-spindle ISM 65, A2-8, C-axis and hydr. Spindle brake - Hinged-belt chip conveyor, incl. coolant tank - External chuck flushing system for main and counter-spindle - Coolant supply through the counter-spindle Todpfx Abe Agr Ivsuod - Coolant spray gun - Safety window cleaning system - Electronic handwheel (if applicable) - Alternating spindle speed - 4-color signal light - Automatic electric work area door - Robo2Go electrical interface - Workpiece probe, Renishaw RMP40 (if applicable) - Tool measuring device, Renishaw RP1 (if applicable) - Drill breakage detection function for Renishaw RP1 - Position measuring system for Z1-axis - Differential pressure clamping 2.0 on main and counter-spindle - Tailstock function for counter-spindle, incl. footswitch - Coolant system 8 / 40 bar, consisting of: - 600 l coolant tank - Variable pump pressure 8 – 40 bar - Belt filter system - Lift pump with level monitoring - Mechanical oil mist separator - Protection Package - Technology cycle with conversational programming - Technology cycle for workpiece parting-off - 2x 3-jaw chucks, Schunk ROTA THW3 265-81 - Robo2Go loading and unloading system, consisting of: - 35 kg module - Drawer storage unit incl. additional drawer - Accessories on request Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Unless otherwise agreed, sales between B&B customers are always without warranty.

Year of construction: 2023, operating hours: 4,500 h, condition: excellent (used), turning diameter: 670 mm, bar passage: 102 mm, spindle nose: JIS A2-8, spindle speed (max.): 3,000 rpm, tool length: 400 mm, turning length: 1,519 mm, CNC turning and milling center Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control: DMG Mori Celos with Fanuc F31iB5 Technical specifications: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travels: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm x2-axis: 200 mm y2-axis: +/- 40 mm z2-axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holder: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 positions Speed of driven tools: 12,000 rpm Tool holder: BMT40 Torque: 16.9 Nm Rapid traverse speeds: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min x2-axis: 25 m/min y2-axis: 18 m/min z2-axis: 40 m/min b-axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: Tsdpfxo Agr Dgj Abusd − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle − Foot switch for chuck operation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine Further technical specifications and accessories can be found in the attachment “Photos and Data”. Accessories, illustrated tools, and clamping devices are only included if specified in the additional information.

Condition: ready for operation (used), For sale: 4 Mazak machines – 1 milling machine and 3 lathes, all in working condition. Must be sold due to lack of space. 1 FJV 25 2 Qturn 8 1 Qturn 6 with robot Tedo Agpy Hepfx Abusd Total price: €14,000.

Condition: reconditioned (used), Haas ST-30 CNC Lathe / Turning Centre (2015) Haas Classic CNC Control Standard chuck diameter: 254 mm / 10″ Maximum turning diameter: Up to 533 mm Maximum cutting length: 660 mm Bar capacity: 76 mm / 3″ Spindle bore: 88.9 mm Tedpfe Agn Dcsx Abued Maximum spindle speed: 3,400 rpm Maximum spindle power: 22.4 kW / 30 hp Standard maximum spindle torque 407 Nm at 500 rpm Spindle nose: A2-6 X-axis travel: 318 mm Z-axis travel: 660 mm Rapid traverse, X and Z: 24 m/min Tool turret” 12 stations Swing over front apron: 806 mm Swing over cross-slide: 527 m Supplied With: Three-jaw power chuck, 12-station tool turret with assorted holders, Tailstock with centre, Fully enclosed machining area, Haas control with colour screen and handwheel. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79298 Machine Serial Number: 3103531 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2000, overall weight: 12,500 kg, Vertical, heavy-duty CNC turning machine with Fanuc control; 630 power chuck; 850 mm turning diameter; no driven tools; good condition; Tjdpfx Abj Aggdhsuod chip conveyor; various tool holders; machine manuals and documentation; without coolant tank and pumps – can be retrofitted if required; ideal for dry machining.

Condition: excellent (used), Year of construction: 2022, operating hours: 4,000 h, functionality: fully functional, turning length: 900 mm, turning diameter: 500 mm, travel distance X-axis: 360 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 900 mm, rotational speed (max.): 2,800 rpm, overall weight: 8,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, CNC turning-milling center SPINNER TC 800 - 110 SMCY with main and counter spindle and Y-axis Year of manufacture: 2022 Control system: Fanuc 31i Technical data: Main spindle speed: 0 - 2,800 rpm Drive power: Main spindle torque: Counter spindle speed: 0 - 4,000 rpm Drive power: Counter spindle torque: Number of stations, turret: 12 Number of driven stations: 12 Tool holder: VDI 30 Travel distances: X-axis: 360 mm Y-axis: +65 / -55 mm Z-axis: 950 mm Accessories: Todpfx As Agfyzjbued - Short bar loader - High-pressure system 12 bar - Chip conveyor

Condition: excellent (used), Year of construction: 2013, operating hours: 19,000 h, DOOSAN PUMA GT2100M – CNC Turning and Milling Center Year of manufacture: 2013 Manufacturer: DOOSAN Model: PUMA GT2100M Machine type: CNC turning center with driven tools Condition: Very good condition Technical data Machining capacity * Turning diameter over bed: 600 mm * Turning diameter over slide: 390 mm * Recommended turning diameter: 210 mm * Maximum turning diameter: 300 mm * Maximum turning length: 513 mm * Maximum bar diameter: 65 mm * Chuck size: 8 inches Main spindle * Maximum spindle speed: 4,500 rpm * Spindle nose: ASA A2#6 * Spindle bearing diameter (front): 110 mm * Spindle bore: 76 mm * C-axis, minimum indexing angle: 0.001° Tool turret * Number of tool stations: 12 Tjdpfx Aj Af Ut Nobued * Driven tools available * Maximum speed of driven tools: 5,000 rpm * External tool size: 25 mm * Maximum drilling bar diameter: 40 mm * Turret indexing time: 0.3 seconds Axes and travels * X-axis travel: 230 mm (80 + 150 mm) * Z-axis travel: 580 mm * Rapid traverse X-axis: 24 m/min * Rapid traverse Z-axis: 30 m/min Tailstock * Quill diameter: 80 mm * Quill taper: MT4 * Quill travel: 80 mm Electrical data * Electrical connection power: 21.80 kVA Machine dimensions and weight * Length: 2,834 mm * Width: 1,628 mm * Height: 1,700 mm * Machine weight: approx. 3,600 kg Equipment and special features * CNC turning and milling center * Driven tools * C-axis * 12-position tool turret * Tailstock

Condition: used, Year of construction: 2006, type of input current: three-phase, overall weight: 7,800 kg, We offer a used Doosan PUMA TT1800SY CNC turning and milling center, built in 2006. Todpfe Af N T Uox Abusd Machine type: CNC turning and milling center Manufacturer: Doosan Infracore Co., Ltd. Model: PUMA TT1800SY Serial number: PT18SY0099 Power supply voltage: AC 200/220 V Power supply phases: 3 phase Protective earth: PE Power supply frequency: 50/60 Hz Rated capacity: 75.21 kVA Largest load: 11.0 kW Full load current: 197.37 A Interruption capacity: 33000 A Electric drawing edition: PT1H68BB00 Weight: 7800 kgf Year of manufacture: 2006 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 145 mm, CNC turning machine Gildemeister Twin 42 Year of manufacture: 2004 Control system: Siemens 840D Powerline Turning diameter: 145 mm Max. bar diameter: 45 mm Spindle head: Flat flange 120 h5 Chuck: 130 / 140 mm Main spindle speed: 20–7,000 min⁻¹ Main spindle power: 28 / 22 kW (40/100 % duty cycle) Main spindle torque: 180 / 140 Nm Counter spindle: Yes, same power X-axis: 220 mm Z-axis: 320 mm Y-axis: ±30 mm Tedpfx Abj Af I D Ueuod Rapid traverse X/Y/Z: 30 / 15 / 30 m/min Turret: 2 × 12 stations Tool holder: VDI 25 Machine weight: approx. 5,300 kg Connected power: approx. 40 kVA Design: 60° inclined bed, linear guides Chip conveyor, Bürener type SPE 63/30-250 Z60 Tool monitoring system, Artis type CTM Tailstock mounted on counter spindle slide, tailstock stroke = 230 mm Tailstock force = 300 daN Center bore MK3 Overload clutch for the X and Z axes of slides 1 and 2 Package for bar machining consisting of: Workpiece extraction device Workpieces can be automatically unloaded from both the main and counter spindles Workpiece dimensions: Ø6 – Ø65 mm, length approx. 300 mm, max. weight 3.5 kg Collet chuck for quick-change tool holders, size 42 Hainbuch Spanntop Connection for bar feed Bar loader magazine, IRCO type SiMag 42

Condition: excellent (used), DOOSAN PUMA 700LMB FANUC 21i-TB (2006) CNC LATHE WITH POWER TOOLS AND “C” AXIS Z-3000 MAIN FEATURES: -CNC FANUC 21i - TB 10.4” LCD Color Manual Guide -Swing over bed: 1,030mm Tjdpfs Af Il Dsx Abuod -Swing over carriage: 800mm -Max. Turning diameter: 900mm -Max. Turning length: 3,200mm -Bar capacity: 164mm (ASA-A1-15) -Turning spindle: 45kw 1,500 Rpm -Gearbox -Motorized turret: 12 stations -Powered tools: 11Kw 3,000Rpm EQUIPMENT INCLUDED: -Hydraulic chuck SMW type KNCS diameter 630mm -C-axis 360 (0.001º) -Automatic tool pre-setter -Integrated tailstock -High-pressure pump 70 Bar Hydracell -Chip conveyor -Hydraulic steady rest ATLING (100-420mm)* -Tool holder set including 4 powered tool holders (2 Straight – 2 Angled)* CONDITION: Machine in Excellent Condition. Available for inspection in working order. Immediate delivery.

Condition: used, Year of construction: 2012, turning diameter 465 mm axis distance 1.150 mm control Siemens 840D centre height 360 mm Swivel range via X-slide 465 mm chuck diameter 250 mm travel -x axis 300 mm travel -z axis 1.050 mm rapid power traverse in X-and Z direction 30 m/min Max. workpiece weight – chuck 150 kg Tedpfx Abj Afztwsusd Max. workpiece weight – tailstock 350 kg Max. workpiece weight – steady and tailstock 600 kg weight of the machine ca. 7,5 t dimensions of the machine ca. 2,5 x 5,3 x 2,2 m Equipment/Accessories: - 12-station tool turret (VDI 40 mount) - With 6 driven tool stations (VDI 40 coupling) - Hinged chip conveyor - Reinforced coolant pump (12 bar) - Hydraulic 3-jaw chuck (D 315 mm)

Condition: like new (used), Year of construction: 2015, operating hours: 1,500 h, functionality: fully functional, spindle bore: 118 mm, bar passage: 118 mm, Machine with very few operating hours. As good as new. Machine with a large number of accessories. 20 bar pressure on the coolant. Turret from SMV. Tjdpfo Afzf Eex Abusd