KS-Präzision

Condition: excellent (used), For sale: BECKER vacuum pump, type 80/4-90. This unit comes from an industrial application and is in good used condition. The pump is equipped with a power cable and a CEE plug. Technical data from the nameplate: Manufacturer: BECKER Type: 80/4-90 Year of manufacture: 2004 Motor: three-phase (3~) Motor number: 6603410 Power at 50 Hz: 0.75 kW Rotational speed: 1420 rpm Current: 4.5 / 2.6 A Voltage: 175–254 V Δ / 300–440 V Y Frequency: 50 Hz cos φ: 0.70 Protection class: IP55 Operating mode: S1 Power at 60 Hz: 0.90 kW Speed at 60 Hz: 1720 rpm Lajdpfxjzvzwts Afwsf CE marking Standard: EN 60034 According to the service label, the manufacturer recommends an inspection every 5000 operating hours. The pump has normal signs of use. The visual condition and the scope of delivery are clearly shown in the photos.

Condition: reconditioned (used), Year of construction: 2016, Technical specifications: Product number V-VC 150 Year of manufacture 2016 Engine power 3 kW Capacity 150 m3/h Maximum vacuum 1.1 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 90 kg Dimensions [h x l x w] 7011 x 281 x 310 mm The pump achieves a vacuum of 1.1 mbar, as confirmed by the measurement on the sensor in the video attached below. After oil service New oil New exhaust separators Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. Ledpfxszvrnio Afwjaf The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and its dependence on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Year of construction: 2013, Technical specifications: Product number: WP 0500 D 4V1 Year of manufacture: 2013 Capacity: 500 m3/h Maximum vacuum: 0.1 mbar The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a complete overhaul and is ready for operation. New seals and bearings, new oil. Lajdpfx Afozvrm Ejwef Achieves a vacuum of 0.1 mbar.

Condition: excellent (used), Year of construction: 2016, Technical specifications: Product number CB 0250 B Year of manufacture 2016 Engine power 7.5 kW Capacity 250 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [height x length x width] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar in the large section and 2.1 mbar in the small section. The pump is in perfect condition after a major overhaul. New bearings, seals, oil filter separators, and oil. Oil-lubricated vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: Laedpfx Aozvrmrjfwsf final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Technical specifications: Product number RA 0250 D 5ZI Engine power 5.5 kW Capacity 250 m3/h Max. vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [h x l x w] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.5 mbar, as confirmed by the recorded video. Lsdpfxjzvrmfo Afwoaf The unit has undergone a major overhaul. The pump is in very good condition, with new filters, oils, separators, etc. Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are classified according to their operating principle into: positive displacement, kinetic, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ionic pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with such a pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Year of construction: 2015, Technical specifications: Product number WV 2000 C 001 Year of manufacture 2015 Capacity 2000 m3/h Max. vacuum 0.1 mbar For more information, please contact us by phone. The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a major overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar, as demonstrated in the recorded video. Lasdpozvrlujfx Afwof

Condition: excellent (used), Year of construction: 2022, Technical specifications: Product number RD 0360 A 5H3 Year of manufacture 2022 Engine power 7.5 kW Capacity 300 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [height x length x width] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar, which is confirmed by the measurement on the sensor in the video attached below. 4.8 -1 on the sensor display means a vacuum of 4.8 to the power of minus one, which equals 0.48 mBar. After major overhaul. The pump is in perfect condition. New oil. Ljdjzvrh Aepfx Afwoaf New oil filter. New exhaust separators. Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are classified according to their operating principle into: volumetric, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with that pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), overall weight: 11 kg, Technical specifications: Ledpfx Afozvrhpowjaf Product number RA 0400 B 4ZI Engine power 11 kW Capacity 400 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1100 rpm Weight 350 kg Dimensions [h x l x w] 1411 x 981 x 1410 mm The pump achieves a vacuum of 0.5 mbar, which is confirmed by our recorded video (5.8 to the power of minus 1 on the sensor indicates 0.58 mBar). The unit, after a major overhaul, operates like new. New seals, filters, and separators. Oil-lubricated vacuum pump, suction – a device used in technology for removing gases (creating a vacuum) in a closed space. Pumps are classified according to their operating principle into: volumetric, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with that pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Year of construction: 2014, Technical specifications: Product number VWP 1500 Year of manufacture 2014 Capacity 1000 m3/h Lajdpfezvrg Eox Afwsf Maximum vacuum 0.1 mbar For more information, please contact us by phone. The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a complete overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar.

Condition: refurbished (used), functionality: fully functional, Technical specifications: Product number: WV 1500 B 001 Year of manufacture: 2004 Capacity: 1500 m3/h Maximum vacuum: 0.09 mbar The booster pump must operate in conjunction with an oil pump with a capacity 2 to 3 times lower. Lsdpfxezvrgro Afwoaf The unit has undergone a major overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.09 mbar.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: D3062953, total length: 960 mm, total width: 480 mm, total height: 320 mm, volume flow: 160 m³/h, power: 7.4 kW (10.06 HP), input voltage: 400 V, input frequency: 60 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,700 rpm, Becker vacuum pump, fully functional after a complete overhaul. Lajdpfjzu Nh Dex Afwef

Condition: used, Edwards Maglev turbomolecular pump, model STP XA4503C (serial number moz9430) + SCU1500 Controller. Fully tested. Ljdpfxsztblxo Afwsaf

Condition: used, Edwards Maglev turbomolecular pump STP XA4503C (moz8950) + SCU1500 Controller. Fully tested. Ljdpfx Afsztbhtowoaf

Condition: used, Edwards Maglev turbomolecular pump STP XA3203C + SCU1600 Controller. Fully tested. 4 sets available. (EUR 10,500/set) Ledpjztbgvsfx Afweaf

Condition: used, 1 unit – Model LPHY 60520, with 37 kW electric motor Laedpozr H R Rsfx Afwof 1 unit – Model Z8220 KK

Condition: used, Vacuum pump, rotary vane pump, sliding vane pump, vacuum pump, cleanroom pump BECKER Type VX 4.40 High Vacuum Pump Serial No.: 2583674 Year of manufacture: 2011 Capacity: 40 m³/h Ljdszrzyaopfx Afwjaf Vacuum: -0.8 bar (determined during test run) Vacuum: -0.9 bar (manufacturer's specification) Suction connection: G 3/4" Motor speed: 1420 rpm Motor power: 1.25 kW Power connection: 400 Volt, 50 Hz - dry-running, oil-free rotary vane vacuum pump - sound insulation made of polystyrene (Styrofoam) Dimensions with sound insulation housing L x W x H: 820 x 460 x 350 mm Dimensions without sound insulation housing L x W x H: 540 x 250 x 280 mm Weight: 45 kg Very good condition

Condition: excellent (used), Various vacuum pumps from cleanroom production (medical technology) are for sale. These pumps come from a company closure or relocation and were used under cleanroom conditions. Lasdpfx Aezrtzpefwsf Further information and images are available upon request. Inspections can be arranged by appointment.

Condition: used, Year of construction: 2013, length / mm width / mm height / mm Becker Vacuum Clamping System U 3.6 S-09 – 230 V – Year 2013 – Complete with Vacuum Pump, Vacuum Tank & Vacuum Table For sale is a complete Becker vacuum clamping system consisting of a Becker vacuum pump, model U 3.6 S-09, a vacuum tank (reservoir), a vacuum clamping table, and the mounting accessories shown in the photos. The system was previously used in an industrial environment and is ideal for CNC routers, machining centers, woodworking, plastics processing, fixture holding, and other vacuum clamping applications. Technical Specifications Manufacturer: Becker Model: U 3.6 S-09 Year of Manufacture: 2013 Power Supply: 230 V, Single Phase Motor Power: 0.30 kW (50 Hz) / 0.36 kW (60 Hz) Speed: 1380 / 1650 rpm Inlet Capacity: 6.4 / 7.4 m³/h Maximum Vacuum: 10 mbar Protection Class: IP54 Scope of Delivery Becker vacuum pump U 3.6 S-09 Vacuum tank / reservoir Vacuum clamping table Clamping rails Mounting and clamping accessories (as shown in the photos) Condition Lsdpfx Afozn Aiuewjaf The vacuum clamping system is in good used condition with normal signs of wear consistent with industrial use. It was removed from a fully operational machine. The sale includes everything shown in the photographs. Inspection is welcome by appointment. Shipping or collection can be arranged by mutual agreement. Plate size: 440 x 280 x 50 mm

Condition: like new (used), functionality: fully functional, Graham Vacuum Pump DF/SCH00058 Type: 2 067/180 20006 171 ID no 12320594/1 Lasdeznpagjpfx Afwsf Unused, ex stores stock. Unit was purchased as a spare, but never used.

Condition: used, functionality: unexamined, 2x Sterling SIHI Liquid Ring Vacuum Pumps with Electric Motors | Industrial Vacuum Pumps | Set of 2 One pump is mounted on a stainless steel base frame, while the second pump is supplied without the base frame. Both units are complete with electric motors and flexible couplings. These industrial vacuum pumps are suitable for continuous operation in the chemical, food, pharmaceutical, and general process industries. The pumps are offered as one complete package. Located in Rotterdam, The Netherlands. Delivery: Ex Works Rotterdam, The Netherlands Loaded onto buyer's truck 100% payment in advance Sold as is, where is No warranty or guarantee No claims or returns accepted Lasdeznb E Ijpfx Afwof

Condition: new, Year of construction: 2017, functionality: fully functional, Elmo Rietschle S-VSI 300 Vacuum Pump Unused Elmo Rietschle (Gardner Denver) S-VSI 300 (42) industrial vacuum pump in excellent condition. The pump is supplied in its original transport crate and comes complete with an operating manual and accessories. Suitable for continuous industrial operation in demanding vacuum applications. Immediately available from stock in Rotterdam, The Netherlands. Technical Specifications Reference Lajdpfx Aoznbglofwef S13 Manufacturer Elmo Rietschle (Gardner Denver) Model S-VSI 300 (42) Year 2017 Capacity 320 – 380 m³/h Ultimate Pressure 0.10 mbar (abs) Motor WEG Premium Efficiency IE3 Power 7.5 kW (50 Hz) Voltage 400/690 V Frequency 50/60 Hz Speed 2935 rpm (50 Hz) Duty Continuous (S1) Condition Unused / Surplus Stock Made in Germany

Condition: new, Year of construction: 2016, functionality: fully functional, Elmo Rietschle / Gardner Denver Vacuum Pump VC 202 (20) – 200-240 m³/h – 5.5 kW Unused Elmo Rietschle / Gardner Denver vacuum pump, manufactured in Germany. The unit is in excellent condition and mounted on its original transport pallet. Specifications: Manufacturer: Elmo Rietschle (Gardner Denver) Model: VC 202 (20) Capacity: 200 – 240 m³/h Ultimate pressure: 0.50 / 0.50 mbar (abs) Motor power: 5.5 kW Voltage: 230/400 V – 50 Hz Speed: 1455 rpm Protection class: IP55 Year of manufacture: 2016 Condition: Unused / Surplus stock Made in Germany Delivery Terms: EX Works Rotterdam, The Netherlands Loaded onto your truck Payment Terms: 100% payment in advance Ljdoznbcgjpfx Afwsaf The equipment is sold as is, where is, without any warranty or guarantee. No claims or returns will be accepted. If you require additional information, technical documentation, or more pictures, please feel free to contact us. Reference: S12

Condition: used, Pump + Controller ALCATEL/ADIXEM ATH-1300M + ACT-1300M/1600 M: 1 pump type ATH-1300M Maxi pump rotation: 34 000 RPM Flange: DN160/200/250 ISO-K 1 controller type ACT-1300M/1600 M (see technical details on photos) + 1 cable Lajdezmwmrjpfx Afwof Used, functional, untested equipment

Condition: like new (used), Year of construction: 2009, functionality: fully functional, overall weight: 860 kg, total length: 1,900 mm, total width: 660 mm, total height: 560 mm, warranty duration: 12 months, Pfeiffer WKP Okta 6000 AM Year of manufacture: February 2009 Lasdpfxjzlx Uhe Afwof - Used - Very good condition - 1-year warranty The following work was performed on the pump: - Complete disassembly and cleaning - Inspection of all wear parts - Professional reassembly In addition, as a company with 25 years of industry expertise, we can offer you: - Advice on choosing the right pump type for your production - Installation of the pump at your facility - Provision of a suitable replacement pump for the duration of the exchange or repair - Overhaul/repair of severely damaged pumps - Worldwide delivery Thank you very much for your interest in our listing. If you have any further questions, please feel free to contact us by email or phone. You can find our contact information on our website. Best regards, Asshorn Vakuumtechnik

Condition: used, functionality: unexamined, Labour L40-UH1 Liquid Ring Vacuum Pump Industrial liquid ring vacuum pump manufactured by Labour Pumps Ltd. (United Kingdom), complete with a Flender electric motor and mounted on a steel base frame. The unit has been professionally dismantled from an industrial production facility and is available immediately from our warehouse in Rotterdam, The Netherlands. Suitable for chemical, petrochemical, pharmaceutical, food processing, and other industrial vacuum applications. Manufacturer: Labour Pumps Ltd. Pump Type: L40-UH1 Pump No.: PS 27267/2 Item No.: 086602 Motor Manufacturer: Flender / ATB-Loher Motor Power: 22 kW Voltage: 400 / 690 V Mounting: Complete skid-mounted unit Condition: Used Location: Rotterdam, The Netherlands We have a large stock of industrial pumps, vacuum pumps, electric motors, valves, and process equipment available. Laedjzltpaopfx Afwof SURPLUS – Industrial Solutions From Surplus to 2nd Life