Biddle and Mumford Gears Ltd

Condition: good (used), Year of construction: 2011,

Condition: used, Year of construction: 2005, drive type: gas operating hours: 9.000 h height: approx. 290 cm Klslhswdynpjcdw Hsr Fork length: 120 cm equipment: Side shift, lighting, Capacity: 3000 kg

Condition: good (used), Year of construction: 2006,

Condition: good (used), Year of construction: 2012,

Condition: good (used), overall weight: 18,000 kg, empty load weight: 2,450 kg, maximum load weight: 15,550 kg, loading space length: 7,450 mm, first registration: 08/2019, suspension: air, Equipment: ABS,

Condition: good (used), Functionality: fully functional, overall weight: 18,000 kg, empty load weight: 2,990 kg, maximum load weight: 15,010 kg, axle configuration: 2 axles, loading space length: 7,450 mm, first registration: 10/2020, suspension: full air, Equipment: ABS,

Condition: used, Year of construction: 1996, color: white, overall weight: 16,000 kg, maximum load weight: 13,540 kg, empty load weight: 2,460 kg, loading space volume: 43 m³, loading space width: 2,480 mm, loading space length: 7,000 mm, loading space height: 2,460 mm,

Condition: good (used), Year of construction: 2016, color: white, overall weight: 16,000 kg, maximum load weight: 13,140 kg, empty load weight: 2,860 kg, loading space volume: 57 m³, loading space width: 2,460 mm, loading space length: 7,700 mm, loading space height: 3,000 mm,

Condition: good (used), Year of construction: 2000,

Condition: excellent (used), Functionality: fully functional, Year of construction: 2020, overall weight: 16,000 kg, maximum load weight: 13,700 kg, empty load weight: 2,300 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,500 mm, GERMAN DEALER offers: 7.45m BDF swap body NEW side tarpaulins Sliding roof Sliding tarpaulin Perforated strip Lashing rings Aluminum slats Year of manufacture 02/2020 16000 kg gross vehicle weight 2300 kg empty Interior: 7300x2480x2500 mm Many swap bodies and carriages are in stock! ##### DELIVERY IS POSSIBLE THROUGHOUT GERMANY! Kjlhjwdylzocdw Hjlr MEPO-NUTZFAHRZEUGE HAS BEEN DELIVERIES SINCE 1983! VIEWING BY APPOINTMENT ONLY! #####

Condition: excellent (used), Functionality: fully functional, container length: 20 ft, color: white, GERMAN DEALER offers: 20' sea container white neutral One way Kljlhjwdyluecdw Her TOP condition loading included ##### DELIVERY IS POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN DELIVERIES SINCE 1983! VIEWING BY APPOINTMENT ONLY! #####

Condition: good (used), Year of construction: 2004, The machine is in good technical condition, after previous agreement the possibility of testing.- The current condition corresponds to the age, we have no problems with the machine at the moment. 16.3.2022 tool magazine door replacement. 28.8.2023 servo changer SIMODRIVE 611/18A was changed. -Number of spindle hours 18396, number of machine hours 56040 -Number of axes 3 Kljlhcjwdylnjdw Hor Machine video on request.

Condition: excellent (used), Year of construction: 2019, operating hours: 4,050 h, Functionality: fully functional, machine/vehicle number: STASV1220319EGCAH, turning diameter over cross slide: 508 mm, turning length: 527 mm, turning diameter: 336 mm, travel distance X-axis: 290 mm, travel distance Y-axis: 55 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,700 mm, total length: 4,500 mm, total width: 2,700 mm, tool mount: 40 mm, overall weight: 8,500 kg, bar passage: 78 mm, distance between centers: 824 mm, travel distance W-axis: 640 mm, operating hours of spindle: 1,040 h, Equipment: documentation/manual, Equipment Highlights: - Year of Manufacture: 2019 - Control: Integrated digital technical documentation Kjlhcdwewdylhs Holr - Counter spindle included - 12 tool positions, including driven tools - Incl. tool package - Turret: BMT65 / VDI40 (DIN 1809) - Fully integrated Y-axis - Recirculating roller guides on the X, Y, Z, and W axes - Transport on a standard truck possible Technical Specifications: - Spindle (Main Spindle): - Max. speed: 3,500 rpm - Max. bar capacity: 78 mm Counter spindle: - Max. speed: 6,000 rpm - Max. bar capacity: 46 mm Turret: - Type: BMT65 / VDI40 - Number of tool positions: 12 - Max. speed of driven tools: 4,000 rpm - Max. boring bar diameter: 40 mm mm - Shank cross-section: 25 mm - Indexing time: 0.15 s Machining range: Travel paths: - X-axis: 290 mm - Y-axis: ±55 mm - Z-axis: 560 mm - W-axis: 640 mm - Max. turning length: 527 mm - Center distance: 824.5 mm - Swing diameter over slide: 508 mm - Chuck diameter: 203 mm Max. turning diameter: - VDI: 336 mm - BMT65: 315 mm - with Y-axis: 224 mm Accuracy: - Positioning accuracy (VDI/DGQ 3441): 0.010 mm (new machine) - Repeatability: 0.005 mm (new machine) Feed rates: - X-axis: 24 m/min - Y-axis: 12 m/min - Z-axis: 30 m/min - W-axis: 30 m/min Installation dimensions & weight: - Dimensions (L x W x H): 4,500 x 2,700 x 2,700 mm - Weight: approx. 8,500 kg

Condition: used, Year of construction: 1989, Technical data: see photo The spindle and axes run smoothly. Klsljwdyk Rehcdw Hor Error: Z-axis feed stops in between Control: Heidenhain TNC114 equipment: Documentation, vice, various recordings,

Condition: excellent (used), Year of construction: 2023, The machine is in good technical condition, testing possible after prior agreement. Put into operation 11/2023 Machine accessories - clamps, vices... Kelhcdwowdyk Ds Hjlr

Condition: good (used), Year of construction: 2016, The machine is in good technical condition, testing is possible after prior agreement. X=750, Y=650, Z=550, rotary table r=650 Rpm 20k, iTNC 640 system, only 26,500 hours on the spindle, 60 slots Klelhcdwjwdykwj Hor

Condition: excellent (used), Year of construction: 2006, The machine is in good technical condition, after prior agreement it is possible to test it. X=880, Y=630, Z=630 Kelhowdykqecdw Hslr Rotary table 360??, tilting head +120??/-30?? 32 slots, chip conveyor Rpm=12k

Condition: good (used), The machine is in good technical condition, after prior agreement it is possible to test it. Multifunctional machine, which has a 5-axis table and a 3-axis table available. Documentation to support. Max. travel in the X axis - 1,520 mm • Max. travel in the Y axis - 520 mm • Max. travel in the Z axis - 420 mm • Max. table width - 920x540mm • Max. diameter of the 2nd table - 650 mm • Max. workpiece weight - 800 kg • 5-axis Klslhcdwewdykks Hor

Condition: excellent (used), Year of construction: 2015, The machine is in good technical condition, testing is possible after prior agreement. Total operating time of the system as of 31.07. 2024 is: 15,264 h - since it was custom production (setup times are longer + programming) I assume that the number of operating hours can be approximately 8,000 to 10,000 h (the machine/system is usually also started during the lunch break/even during programming +000) 0 h corresponds to approximately 80 to 100 h per month (March 2016 to July 2024 = 100 months), which is quite realistic for piece production - the machine is in very good visual and technical condition - the machine is connected and in operation - the machine is possible, clamps, tools ...) Specifications of the DOOSAN DNM 650 II machine: - control system: SIEMENS 828D - spindle with direct drive: 12,000 rpm - two-contact clamping system in the BIG-PLUS spindle (SK40 spindle taper) - oil cooling of the spindle head - thermal compensation system (software) - working area (travels 6) X/Y /Y/Z: 36/36/30 (m/min) - Max. cutting power: 18.5 kW - tool magazine: 30 tools - RENISHAW tool and workpiece probe - internal cooling through the spindle center: 12 Bar - external cooling with air and cutting fluid - internal screws + chip conveyor - coolant tank: 380 l - GB rinse - forward block reading for 3D machining - handwheel for feed. It is possible to purchase accessories for the machine worth up to 20,000 euros. Klolhcdswdykdsw Hor

Condition: excellent (used), Year of construction: 2012, The machine is in good technical condition, after previous agreement the possibility of testing. Klelhcowdyi Todw Hor

Condition: excellent (used), Year of construction: 2016, The machine is in good technical condition, after prior agreement it is possible to test it. including 4-axis TSUDAKOMA, workpiece probe + tool probe. Travels Travels of axes (X/Y/Z) mm 1,000 / 550 / 500 Distance table surface - spindle face mm 130 - 630 Kjlhewdyiyscdw Hjlr Axis guide - linear rolling LM Table Working surface mm 1,100 x 502 Load capacity kg 700 Table surface configuration mm 5x T-slot (width 18, spacing 80) Spindle Maximum speed rpm 12,000 Spindle power (10 min / continuous) kW 18.5 / 11 Feeds Rapid traverse (X/Y/Z) m/min 36 / 36 / 30 Working feed (X/Y/Z) mm/min 1 – 24,000 Feed motor (X/Z) kW 1.8 / 1.8 / 3.0 Automatic tool change Tool taper - BT40 Clamping pin - MAS P40T-1 (45??) Number of tool positions pcs 24 Max. tool diameter mm Ø 80 / Ø 150 (without secondary tool) Max. tool length / weight mm / kg 300 / 8 Tool-tool change time sec 2.5 Swarf-swarf change time sec 4.3 Magazine and change design - disc with rotating arm Source Power input kVA 30 Tank capacity For lubrication / spindle cooling l 6 / 20 For emulsion cooling l 380.Machine dimensions Height mm 2,670 Floor area (length x width) mm 3,335 x 2,200 Weight kg 6,500 Control system - Fanuc 0i-MD Spindle air blowing Machine adjustment elements Machine protective cover Screw conveyor in the working area Cooling system Protective door Ethernet interface

Condition: used, Year of construction: 2005, Travel: X-1040 mm, Y-600 mm, Z-500 mm Control: Siemens 810D powerline Spindle speed: 12,000 rpm Spindle mount: SK40 tool magazine: 30 pos clamping surface: 1,250 mm x 600 mm max. table load: 800 kg Internal coolant supply (IKZ): 40 bar Klelewdyitshcdw Hjr equipment: Chip conveyor, spindle cooler, internal cooling, measuring probe, tool measurement, documentation;

Condition: good (used), Year of construction: 2016, The machine is in good technical condition, after previous agreement the possibility of testing. X, Y, Z - 1.016 x 508 x 635 mm Klelhjwdyigjcdw Hsr Table size: 457 x 1.219 mm Max. table load: 1.438 kg

Condition: excellent (used), Year of construction: 2015, The machine is in good technical condition, after prior agreement it is possible to test it. X = 1200 mm Y = 660 mm Z = 610 mm Table dimensions: 1350 x 690 mm Table load capacity: 1,100 kg Spindle speed: 8,000 rpm. Kjljwdyiaehcdw Helr Spindle: CZ 40 High-pressure coolant through the tool: YES Operating system: Fanuc Operating hours: 5,078 h Total hours: 6,373 h Magazine: 24 positions

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 0040000963C, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 500 mm, spindle motor power: 14 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 550 mm, tool mount: 40 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 192 Nm, bar passage: 52 mm, total height: 1,850 mm, total length: 4,100 mm, total width: 2,600 mm, overall weight: 4,500 kg, controller manufacturer: Siemens, controller model: SINUMERIK 840D, distance between centers: 700 mm, operating hours of spindle: 6,230 h, Equipment: documentation/manual, rotational speed infinitely variable, Equipment highlights: - 12 driven tool stations - Counter spindle - Permanently integrated Y-axis - VDI30 tool holder - Tool package with rigid holders - Chip conveyor included - Control system: Siemens SINUMERIK 840D - Machine hours: 10,270 h - Spindle hours: 6,230 h Please note: The supplied chuck and tool holders do not correspond to the components currently installed or clamped on the machine. Technical Specifications: General: - Year of manufacture: 2014 - Max. connected load: 30 kVA - Mains voltage: 400 V, 50/60 Hz - Control voltage: 24 V - CE-certified Machining range: - Max. turning diameter: 500 mm Kjljwdyh Nehcdw Helr - Max. turning diameter in the slide area: 290 mm - Max. turning length: 500 mm - Distance between centers: 700 mm Travel paths: - X-axis: 210 mm - Y-axis: ±40 mm - Z1-axis: 525 mm - Z3-axis: 550 mm Main spindle: - Max. speed: 6000 rpm - Power: 13 / 14 kW - Torque: up to 192 Nm - Spindle bore: 52 (67) mm - Spindle nose: FL 140h5 Counter spindle: - Maximum speed: 6000 rpm - Power: 12.6 / 16.2 kW - Spindle bore: 44.5 mm - Spindle nose: FL 140h5 - Spindle nose spacing: 780 mm - Max. workpiece weight (counter spindle): 80 kg Turret & Tools: - Tool holder: VDI30 - 12 tool positions (all driven) Driven tools: - Speed: 5000 rpm - Power: 4.18 kW - Torque: 20 Nm - Tool change time: 0.4 / 0.7 s Travel speeds & accuracy: - Rapid traverse X/Y/Z: 30 / 22.5 / 30 m/min - Resolution XYZ: 0.001 mm - Ball screws: 32x10 mm - Accuracy according to VDI/DGQ 3441: - X/Y/Z: 10 µm (new machine) - Z3: 16 µm (new machine) - Repeatability: 3 µm (new machine) Dimensions: - Transport dimensions (without chip conveyor): 3330 x 1946 x 1829 mm - Overall dimensions (including chip conveyor): 4066 x 2583 x 1829 mm