Хохенщауфен Рикавъри Еоод

Year of construction: 2012, Condition: excellent (used), Ejection Mitigation Test System – FMVSS 226 | Occupant Safety Impact Tester Ejection Mitigation Test System (EMI) – Technical Specifications General Information Manufacturer: Oilgear Towler GmbH Application: Testing occupant safety systems according to FMVSS 226 Impact Type: Headform with a total mass of 18 kg Impact Speed: 16 km/h or 20 km/h Trigger Time for Windowbags: 6 s or 1.5 s before impact Axis & Positioning System Positioning system with 4 axes X-axis travel: 3700 mm Y-axis travel: 2000 mm Z-axis travel: 2700 mm Rotation angle (Y-axis head): 180° Hydraulic System Hydraulic Cylinder Speed: Up to 25 km/h Cylinder Stroke: 350 mm Carriage Travel: 600 mm Drive Medium: Hydraulic Measurement System FARO measuring arm for test point calibration Machine Data Serial Number: OD2555 Order Number: 73193 Tank Volume: 1.1 liters Operating Medium: Mineral Oil HLP 46 (DIN 51524) Power Consumption: 18 kW Operating Voltage: 3AC 400V / 50Hz Lhelhov R S Iveccqpjd Travel Distances X-direction (Cross Axis): 3680 mm Y-direction (Longitudinal Axis): 2060 mm Z-direction (Vertical Axis): 3150 mm Rotary Axis (Y-axis): 180°

Condition: excellent (used), Year of construction: 2016, operating hours: 3,380 h, Functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, Technical Specifications – Quaser MV204C - 5 axis vertical machine center Manufacturer: Quaser Model: MV204C Year of manufacture: 08/2015 (initial purchase 08/2016) Operating hours: 3880 h Machining time: 3780 h Machine power-on time: 12,620 h Travel distances: X-axis: 1250 mm Y-axis: 650 mm Z-axis: 600 mm Control: Siemens 828D with ShopMill Spindle: Ljlhccov R S E Ieqpshd Speed: 10,000 rpm Tool holder: SK40 DIN 69871 Tool magazine: 30-position tool changer Accessories: Documentation AME internal coolant system Chip conveyor 4th axis: Lehmann Series 500 Infrared touch probe Oil mist extraction system

Condition: excellent (used), Year of construction: 2011, operating hours: 7,172 h, Functionality: fully functional, Mori Seiki NHX5000 – Technical Specifications Manufacturer: Mori Seiki Model: NHX5000 Type: 4 axis horizontal machine center Year of manufacture: 2011 (purchased new in 2013) Machine Hours ON electricity: 29288 h Machine Hours OPERATIONAL: 7172 h Spindle Hours ON: less than 5000 h Axis Travel X-axis: 730 mm Y-axis: 730 mm Z-axis: 880 mm B-axis: 360° (1° indexing) Working Area: Spindle center to table: 80–800 mm Max. workpiece weight: 0.5 t Pallet size: 500 x 500 mm Number of pallets: 2 Spindle & Tooling: Spindle speed: 10,000 rpm Spindle taper: SK40 DIN 69871 Tool changer: 60 tools Max. tool length: 550 mm Max. tool diameter: 70 mm Tool change time (tool-to-tool): 0.9 sec Feeds & Drive: Feedrate (infinitely variable): up to 60,000 mm/min Rapid traverse (X/Y/Z): 60 m/min Power requirement: 34 kW Machine Dimensions: Floor space (L x W x H): 5.5 x 3.0 x 2.8 m Machine height: 1100 mm Machine weight: approx. 11.1 t Control & Software: CNC control: MAPPS2 with M730BM interface Accessories Included: Internal coolant system Knoll, 50 bar Chip conveyor Expansion for 400 tool positions (!) 1x Lang zero-point clamping pallet LANG MADE IN GERMANY clamping tower Leljv R S Amjhccqpshd Approx. 100 tool holders (SK40) Full documentation (manuals perfectly kept clean)

Condition: used, Year of construction: 2008, operating hours: 7,900 h, Functionality: fully functional, Equipment: rotational speed infinitely variable, Mandelli Storm 2500 Banal Basis Data X-axis travel: 2600 mm Y-axis travel: 1500 mm Z-axis travel: 1800 mm Main spindle: 6000 rpm; Tools HSK 100 Pallet system: Continuous; 6 units; 1000 x 1250 mm High-pressure cooling: 60 Bar Tool magazine: 280 positions CNC control: Siemens 840D Solution Line Accessories: Chip conveyor Specifications, layout, and further details available upon request. The machine comes with a massive pallet changer, special clamping blocks and a vast amount of HSK 100 tool holders. The company will get rid of the entire stuff and everything you can see in the pictures, will be inclusive in this deal. The machine must be out in one month. Therefore we invite customers immediately to show up for inspection. The machine is working one shift per day onl 3-4 times per week. The machine is without any doubt in new-like condition. Lhjlev N Nd Sehccqpsd The nearest airport for inspection is the Bulgarian capital, Sofia. We can arrange acomodation, travel journey and on-site inspection.

Condition: excellent (used), Year of construction: 2011, operating hours: 49,000 h, Functionality: limited functionality, Technical Data – Klingelnberg Oerlikon C 29 Machine Type: CNC Spiral Bevel Gear Milling Machine CNC Type: Siemens 840 D Power Line (NC572.5) Manufacturer: Klingelnberg Model: Oerlikon C 29 Maximum Gear Diameter: 290 mm Module Range: Continuous Indexing: 1.5 - 4.5 mm Single Indexing: 1.5 - 6.5 mm Cutter Radius: 39 - 105 mm (3.25" - 7.7") Location Diameter (Oerlikon Outer Taper 1:4): Ø 140 mm Inner Taper: No. 39 Ø 99.21 mm Space Requirement (L x W x H): 3270 x 2400 x 3250 mm Net Weight: Approx. 18,000 kg Machine Connected to Power: 112,000 h Lhelhcov I E Sijcqped Machine Operating Hours: 49,000 h Spindle Hours ON: 37,000 h Machine Description – Oerlikon C 29 The Oerlikon C 29 is a state-of-the-art CNC spiral bevel gear milling machine, designed for the precise and cost-effective production of spiral and hypoid gears. It is being sold with immediate effect. Included in the price is a portal loader from the manufacturer FELSOMAT, also from the year 2011. The Oerlikon C 29 spiral bevel gear hobbing machine is designed exclusively for dry machining. In combination with Oerlikon high-performance tools ARCON® and SPIRON®, this hobbing machine can manufacture all common spiral bevel gears using both the continuous indexing method and the single indexing method. The vertical design of the Oerlikon C 29 and the direct drives for the tool drive, workpiece drive, and basic angle drive are specifically tailored for dry cutting with coated carbide cutters. It is suitable for all common machining processes from Klingelnberg and Gleason. Information on the standard module and workpiece diameter can be found in the Technical Data section. Key Features of the Oerlikon C 29: The machine is exclusively designed for dry cutting. Its vertical machine bed and direct drive for the tool and workpiece enable high-precision machining. Supports both single indexing and continuous indexing. Compatible with high-performance tools such as Oerlikon ARCON® and SPIRON®. Fully integrated into the KIMoS calculation and database system, allowing for not only Oerlikon-specific machining but also nearly all commonly used cutting processes. Closed-loop production: Networking with Klingelnberg P-series measuring machines allows for precise manufacturing according to nominal data, including automatic machine corrections. Application Area: The Oerlikon C 29 is ideal for modern gear manufacturing in the automotive and transmission industry, where maximum precision and efficiency are required. Thanks to optimized dry machining, it significantly reduces coolant consumption and lowers operating costs.

Condition: good (used), Year of construction: 2006, operating hours: 9,000 h, Functionality: fully functional, machine/vehicle number: 348021, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 4,500 rpm, This universal milling and drilling machine from the renowned manufacturer Kunzmann is located in Switzerland and has only been used for single-part production in prototype manufacturing throughout its entire lifespan. Maintenance and servicing have been carried out with exceptional diligence. The machine has reached a certain age and is to be removed from operation immediately. Machine Data Manufacturer: Kunzmann Model: WF 4/3 Type: Universal Milling and Drilling Machine Year of Manufacture: 2006 Operating Hours: Approximately 9,000 Lslhccjv I Ekxsqpohd Control System: Heidenhain TNC 320 Travel Path (X/Y/Z): 400 x 350 x 300 mm Accessories: Various holders Tool Taper: SK40 Magazine Positions: Unknown Spindle Speed: 4500 RPM Condition: The machine is in very good condition and is connected to power Required Space (LxWxH): Not specified Weight: 1,900 kg Availability: Immediately

Condition: good (used), Year of construction: 1998, operating hours: 13,255 h, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, This 3 axis machine center is located in Switzerland and has only been used for single-part production in prototype manufacturing throughout its entire lifespan. Maintenance and servicing have been carried out with exceptional diligence. The machine has reached a certain age and is to be removed from operation immediately. Machine Data – DMC 103 V Type: DMC 103 V Year of Manufacture: 1998 Operating Hours: 13,255 Control System: Heidenhain TNC 426 Travel Path (X/Y/Z): 1000 x 600 x 600 mm Accessories: Various holders Tool Taper: SK40 Magazine Positions: 24 Spindle Speed: 20 - 8000 RPM Condition: The machine is in good condition and connected to power Ljlhcov I Ei Iscqpehd Demonstration: The machine can be demonstrated on-site at any time Comprehensive spindle overhaul in 2023 – silent, top-quality performance even at maximum speed Required Space (LxWxH): 4800 x 4500 x 2300 mm

Condition: good (used), Functionality: fully functional, machine/vehicle number: 624914, Maximum gear diameter: 266 mm Maximum pinion diameter: 152 mm Offset of gear spindle above or below the center of the pinion spindle: 95 mm Ljlhsv Ihdheccqpjhd Pinion spindle diameter of taper hole at large end: 100 mm Main motor: 5 HP / 1800 rpm Taper per foot: 13 mm Floor space: 1800 mm × 16200 mm Net weight: 4195 kg

Condition: used, Year of construction: 1981, Functionality: fully functional, Modernized and retrofitted VTL with double column. Very good condition. Modernized with today SIEMENS 840 CNC controls and SIEMENS drives. Works just fine turning very solid tolerances. Workbench Diameter: 2400 mm Maximum Cutting Workpiece Diameter: 2600 mm Maximum Workpiece Height: 1600 mm Maximum Workpiece Weight: 10,000 kg Tool Holder: 50 x 50 + Capto - K63 Vertical Stroke: 1400 mm Tool Post Vertical Stroke: 1000 mm Table Speed Range: 0 - 117 rpm Feed Range: 0.1 - 300 mm/min Lhjlhev Idtfoccqpsd Rapid Traverse Speed: 3000 mm/min Traverse Speed Range: 1 - 2400 mm/min Motor Power Output: 50 kW

Condition: used, Year of construction: 2004, operating hours: 57,000 h, Functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 630 mm, 5 axis vertical machining center from CHIRON available in Austria for restructuring operation NC controls Siemens 840 D Year of make 2004 X 2000 mm Y 610 mm Z 630 mm 92 tool positions Essential Data – Chiron Mill 2000 High Dynamics Machine Structure: Optimized for stiffness and weight to maximize dynamics Axis Acceleration: Up to 17 m/s² Rapid Traverse Speed: Up to 75 m/min Travel Path (X-Axis): Up to 6000 mm Machining Types: 5-axis and long-bed machining Spindle Drives: Torque up to 280 Nm for heavy-duty machining Speeds up to 20,000 rpm for aluminum machining Lhelov H Ruashccqpod Key Features: Direct drives for rotary axes NC swivel head with ±110° adjustment Hydraulically optimized clamping fixtures for minimal clamping times Linear direct drives for X-axes from 4500 mm Application Areas: General machining, individual components manufacturing, steel milling operations Automotive industry (body and structural components) Aerospace (highly efficient machining) High-productivity CNC milling Operating Options: Single-spindle production center in vertical moving column design Pendulum operation for parallel loading during main machining time The Chiron Mill 2000 combines high precision, extreme speed, and flexibility for demanding machining tasks.

Condition: excellent (used), Year of construction: 2014, operating hours: 10,600 h, Functionality: fully functional, turning length: 3,000 mm, turning diameter: 670 mm, This second hand INTEGREX model "e-420 H-S II"i s a Multi-Tasking Machining Center and a complete fusion of CNC turning center and machining center, forming one of the best and most advanced multi tasking machine in the industry. Complete all operations in a single setup – turning, milling, boring, drilling, part transfer from spindle 1 to spindle 2 and more with Mazak's Done-In-One capability. The machine delivers precision and performance for heavy, large-diameter, shaft-type workpieces within a wide range of industry applications. This machine was barely used in a company that recently filed for bankruptcy in 2024. The former owner from Poland was active in the general machining as third party contract manufacturer. The entire factory will shut down within the next few months. The company had just been purchased in 2025 by an investor who will delete the entire manufacturing operation and transform the building for new purposes. General Discription Milling spindle travel -30 ~ 210 degrees (.0001 degree min index angle) Available 2.5k 40HP 5.2” spindle Bore (option) Identical second spindle for Done-In-One part processing Full C-axis contouring (.0001 degree minimum index) Available 80 or 120 automatic tool changer options available Lhjlov H Rtcohccqpjd Machine Specifications CNC control: Mazatrol Matrix 2 Distance between centers: 3000 mm Max turning diameter: 670 mm Max machined length: 3000 mm Max workpiece weight: 880 kg Max chuck speed: 2500 rpm Automatic tool changer: 40 tools Spindle motor power: 22 kW Motor power of the milling unit: 15-22 kW Milling spindle: 12000 rpm Indexation: 0.0001° X/Y/Z axis travel path: 845 / 420 / 3013 mm Rapid traverse in X/Y/Z axis: 50 / 50 / 40 m/min High-pressure cooling through the center of the tool: 70 bar Operating hours: 10600 h

Condition: like new (used), Year of construction: 2018, operating hours: 1,000 h, Functionality: fully functional, For sheet sizes to 3048 mm x 1524 mm This tower has 6 meters height Lhelhov H Ecleccqpjd Like new barely used for sale because plant closure Full technical specifications on request Layout available also on request Maybe 1000 hours approximately Price indication around 20% of formerly invoiced price for new one Special occasion Location Austria

Condition: excellent (used), Year of construction: 2006, operating hours: 23,200 h, Functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, Equipment: chip conveyor, This machine center works dry Disconnected from electricity one month ago Machine worked until 01/2025 No IKZ no inner cooling through spindle The machine only worked 1 shift over it’s lifetime and is in amazing condition Accuracy report of workpieces available on request Almost new-like condition, dismantling done by highly skilled specialists NC Backup, System Backup, digital instruction everything already prepared and already set with the machine X/Y/Z mm 630 / 630 / 630 Spindle HSK63 speed 16.000 rpm Lslhjv H D Umoccqpshd B axis 360.000° Tool magazine with 160 tool places 12 pallet pool Internal cooling and high pressure unit Mechanical tool breakage control Brankamp available Filtration system Extraction system Chip coneyor Installation elements/Fixators BW User guide / Documentation Machine parameters on storage medium

Condition: used, Year of construction: 1975, Functionality: fully functional, machine/vehicle number: 050 100 780 975, This center lathe is in good condition. Lholjv Hycgohccqpsd The guides are in very good shape. Drive power: 6.6 kW Center height: 200 mm Distance between centers: 1000 mm Weight: 2500 kg Spindle speed: 2000 RPM Quill taper: MK4 Machine dimensions (LxWxH): 2600 mm / 1100 mm / 1500 mm Chuck: Forkardt three-jaw chuck Ø250