Sahler

Condition: used, Year of construction: 1960, width 1000 mm Fgedpfx Aas Ai Ht Asnsi weight 88 kg height 390 mm

Condition: used, Year of construction: 2000, Pressure total: 400 ton Ram stroke: 200 mm Slide adjustment: 150 mm Shut height (stroke down, adjustment up): 700 mm Table surface area : 2.000 x 1.525 mm Slide area: 2.145 x 1.200 mm Free frontal opening L-R: 2.150 mm Free lateral opening F-B: 1.050 Number of strokes: 20 - 80 s.p.m. Main Motor: 78 kW Height over floor approx.: 5.000 mm Dimensions L x W x H: 4.810 x 2.830 x 5.770 mm Height below floor level: ca. 700 mm Oil volume: 185 l Weight of machine approx.: 51 ton Standard configuration DREHER Feeding Line - Year of Manufacture: 2000Decoiler - Type 2386 F MO FPS Max. coil weight: 8 t Strip width: max. 800 mm Coil outer diameter: 1,400 - 1,500 mm Spreading range: 475 - 530 Mandrel height above floor: 1,400–1,500 Fgedpfs Ai Htxjx Aanoi Mandrel spread: hydraulic Drive: hydraulic Straightening unit – Type 1691 E-RDS ZWL Strip width: 50–625 mm Material thickness: 1.2–5.0 mm Feed rollers: 2 Straightening rollers: 7 Straightening roller diameter: 100 mm Exit rollers: 2 Strip speed: 5–50 m/min. Material strength: 400 N/mm² Extended machine accessories Dynamic Drive with modified overhead drive systemHydraulic die clampsHydraulic die lifting rollersDie change consoles

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 370 mm, overall weight: 870 kg, x-axis travel: 400 mm y-axis travel: 375 mm z-axis travel: 250 mm table size: 205 x 800 mm T-slots: 4 x 45 14 H7 speeds: 50 - 2500 RPM tool taper: 40 ISO spindle stroke: 50.0 mm Fsdpfx Aao Ai Htujnogi feeds: X + Z axis: 5.0 - 1000 mm/min feeds: Y axis: 5.0 - 670 mm/min rapid traverse: 2.4 / 1.6 m/min DRO: Heidenhain total power requirement: 4.5 kW weight: 950 kg dimensions (L-W-H): 1860 x 1790 x 1750 mm Machine in good condition (!!)

Condition: used, Year of construction: 2016, max. swing diameter 680 mm max. turning diameter 465 mm control SIEMENS - 840 D travel -x axis 265 mm travel -y axis 120 mm travel -z axis 1.050 mm number of spindle speeds ^3.250 U/min Fsdpfe Ai Htqjx Aanogi spindle bore diameter 103 mm forward bearing diameter 140 mm numbers of positions in the tool changer 12 rapid travel x/y/z 30 / 10 / 30 m/min rapid traverse C-axis 100 U/min CNC Turning- and Milling Center | DMG MORI - ecoTurn 510 equipped with 12-way tool changer, turrets for driven tools, Y-axis and chip conveyor. The machine has only approx. 4.600 H spindle hours. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMG ecoTurn 510 | eco Turn 510 | ecoTurn510

Condition: excellent (used), Diosna SP 160, stainless steel version. Fodpo Ai Htiefx Aansgi

Condition: used, Year of construction: 1994, functionality: limited functionality, Rotor shear UC 140, with hydraulic pressure unit (HNDE), Fgsdpfxj Ai Htfe Aansi Drive: 2 x 22 kW, control cabinet, cutting unit size: 1450 mm x 1000 mm, blade width: 85 mm. The machine is operational and shows little wear, however, the cutting unit requires repair (3 blades are damaged).

Condition: used, Year of construction: 2011, 1. 529893 Morbidelli Universal X5 HDL45 CNC-controlled machining center Travel range X/Y/Z axis: 5,164 x 1,914 x 400 mm Machining area: X= 4,038 mm (with tool changer on the right and left) X= 4,400 mm (with a tool changer on the left) X= 4,469 mm without tool changer Y= 1,613 mm GENERAL FEATURES CNC machining center with a fixed machine table and a movable head in a portal design for drilling and milling operations on panels made of various materials (chipboard, MDF, solid wood, plastic, etc.). MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel, reinforced throughout the machine bed by welded-in parts, making it extremely stable. The table design, with a large base, is key to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite a minimum of moving parts. The mobile portal carriage is made of solid steel and is positioned in the X direction on prismatic, ground guides using ball screw slides. The machining head is again attached to this mobile carriage on prismatic, ground guides and the ball screw slide. Axis movement is provided by "Brushless" motors in the X/Y/Z axes. The drive system in X uses a pre-tensioned, precision rack and pinion drive; in the Y/Z axes, it uses ground ball screw spindles of the highest precision class. WORK TABLE The work table is designed to guarantee the operator maximum "freedom of movement." The vacuum quick-clamping system provides maximum flexibility with precise positioning and optimal workpiece holding. The table consists of movable consoles that are adjusted in X on ground guides with ball bushings and have a special profile to ensure maximum stiffness. Each console can be equipped with adjustable suction cups in Y, which are capable of clamping the workpiece to be machined. The consoles and the suction cups can be locked independently of each other in the desired position by means of pneumatic devices with push-button operation. The vacuum is supplied directly to the suction cups from the console without external hoses, and thanks to a series of automatic valves arranged on the console and actuated by the suction cups themselves, regardless of their position. The suction cups not involved in the machining process can be quickly removed from the work surface or excluded from the vacuum clamping by means of a manually operated valve located on the upper side of the same suction cup. The work table also includes a series of reference stops in the rear and central areas, which are controlled by program according to the respective workpiece dimensions. MACHINING HEAD - Base machine - 11 kW Prisma K milling head with TTS system 5-axis controlled milling head The Prisma work unit (5 axes) is a gimbal head arranged at 45° to each other. This has many advantages: - The full work area can be used in both 3-axis and 5-axis machining - The same working speeds can be achieved horizontally as vertically Fgedps Ai Htbofx Aanji - Additional aggregates can be accommodated TTS system (TOTAL TORQUE SYSTEM): · TTS is an exclusive system patented by SCM/Morbidelli for clamping the B and C axes in all "PRISMA" 5-axis heads. · the additional

Condition: used, Year of construction: 2002, Bandsaw with feed rollers, blade diameter: 900 mm, cutting width: 880 mm, cutting height: 700 mm, cutting speed: 1800 m/min. Blade length: 6550 mm, blade width: 25 - 80 mm, table size: 900 x 900 mm, with table tilting mechanism via handwheel and rack and pinion, with support roller stand, tiltable up to 45°. Three-phase motor: 11 kW. 4 dust extraction ports: 140 / 100 / 100 / 100 mm. Dimensions: 1980 x 1270 x 2825 mm. Weight: approx. 1050 kg. Location: Supplier. Fgsdpfo Ai Hr Tox Aansi

Condition: used, Storage location: Supplier Fgodpfx Aj Ai Hr Neanji

Condition: used, Year of construction: 2019, Block gluing press with a clamping dimension of 1500 x 5000 mm, featuring 10 pressing units that can be moved on ball bearings. Workpiece support, 150 mm deep and height-adjustable, with a hole grid. Cylinders are height-adjustable and have a pressure plate 150 mm deep. Cylinders with a 150 mm stroke and 2.7 tons of pressure, with a shut-off valve. Cylinder retraction is spring-assisted. 1 hydraulic unit, 3 kW, with 2 control circuits for 5 cylinders each. 5 clamping devices. Fgedpfs Ai Hr Esx Aanei Location: Supplier.

Condition: used, x-travel 570 mm y-travel 210 mm z-travel 365 mm turning speeds 50 - 6300 U/min spindle taper ISO 40 SK quill stroke 127 mm Feds Ai Hrzspfx Aansgi table: 915 x 200 mm table load 160 kg feed range 0,04/0,08/0,16 mm/min total power requirement 2,2 kW weight of the machine ca. 850 kg. range L-W-H 1350 x 1300 x 2010 mm Multifunctional drilling and milling machine for professional use. Stepless speed control. Features electronic speed control and a digital position displayâ??features that impress in terms of quality, performance, and price. Heavy-duty, solid construction made of high-quality Meehanite cast iron. All axes feature adjustable dovetail guides. Forward and reverse rotation. High concentricity accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Main power switch, forward/reverse switch, emergency stop pushbutton. Digital speed display. Height-adjustable protective screen with microswitch. Central lubrication for spindle, nut, and guides; milling heads can each be swiveled 90° to the left and right; spindle head carrier rotatable by ±90°; manual spindle brake; includes Digital Readout (DRO), digital 3-axis position display (Xâ??Yâ??Z) For measuring positions

Condition: used, empty load weight: 6,270 kg, axle configuration: 3 axles, first registration: 06/2018, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2018, mileage: 175,140 km, ref: F0832749 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Lifting odometer, * Toolbox: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking rods on rear doors: 4, * Sliding tarpaulin, * Side sliding tarpaulin, * Multilock, * Floor: Plywood floor, * Insertion strip (aluminum): 31 VIN: WKESD00000832749 Tire size: 385-65 R22.5 Fgjdpfxe Ai Hrwe Aanei Internal length: 13.62 m Width: 2.55 m Internal width: 2.48 m Height: 4.04 m Internal height: 2.79 m

Condition: used, Year of construction: 2004, bar material dia. 16 mm spindle passage 20 mm turning length 200 mm Control Mitsubishi MELDAS 635 c-axis 2 x 0,001 ° gripping station 16 mm speeds 10000 U/min rapid traverse 20 m/min turret (x-stations) 10 worktool system 5+4 Vertikal worktool system 3 Werkzeugsysteme Number of working hours 2-schichtig h load magazine LNS Tryton (7mm Trommel) total power requirement 3,7 kW weight of the machine ca. 2610 kg dimensions of the machine ca. 2 x 1,1 x 1,7 m Fgsdpfxj Ai Hrto Aansi CNC sliding headstock machine Citizen M16-III with barloder LNS Tryton 112 (7mm bar) Comes from fine mechanic plant (electronic) Equipment: # Standard 4 driven milling spindles on gang tool post # Turret; 2 fix for turning, 3 fixed for drilling regular service and replacement from spare parts.

Condition: used, Year of construction: 2022, CSI Automated Palletizer Integrated HMI controls Motorized roller conveyors Gantry palletizing system Fgjdpfx Aaj Ai Hrpjnji Allen-Bradley PanelView Plus interface Full perimeter safety guarding Stretch wrap cart Compatible with 48"x40" pallets Rated up to 2,200 lbs per pallet Estimated capacity of 50-120 pallets per hour Condition: Good

Condition: used, Year of construction: 2014, Maxon Rotary Drum Dryer System (2014) MAXON burner and Honeywell flame controls stainless steel drum construction Safety cages Full control and valve system Flame safeguard panel Electric drive with support rollers Fjdpfx Aas Ai Hrlenogi Control cabinet with emergency stop Estimated size 20-25 ft Condition: Good

Condition: excellent (used), functionality: fully functional, Manufacturer: Polar Model: 92 XT Year of manufacture: 2008 Machine type: Hydraulic power cutter with programmable touchscreen control Technical data * Maximum cutting width: 920 mm * Maximum feed depth: 920 mm * Maximum stacking height: 130 mm * Knife speed: up to 45 strokes/min * Back gauge: programmable, with precise positioning system * Clamping beam: hydraulic * Knife drive: mechanical drive with worm gear * Control system: XT program control with color touchscreen * Safety device: safety light curtain Fodpfx As Ai Hrdsansgi * Table system: air table for easier material handling Equipment * Programmable cutting programs * Precise positioning of the back gauge * Air table for convenient movement of the material to be cut * Side tables to extend the working area * OptiKnife system for knife changing and fine adjustment * Hydraulic clamping and cutting system

Condition: used, Year of construction: 2020, Rovema horizontal cartoning line with end-load design, integrated conveyor, laser marking system, color touchscreen HMI, automatic product feed, full safety guarding, 400V 3-phase power, approx. 200 cartons/minute, handles cartons up to 13.8" x 7.9" x 4.7" (350 x 200 x 120 mm), net weight approx. 6,600 lbs (3,000 kg), previous use in food packaging industry. Fgsde Ai Hraepfx Aansi

Condition: excellent (used), The ESAB Origo MIG C340 PRO 4WD is a powerful and reliable MIG/MAG welding machine for professional use. Thanks to its maximum output of 340 amps and the 4-roll drive system for the wire feeder (4WD), this machine offers an extremely stable and consistent wire feed. This ensures a uniform weld bead and optimal control, even with longer welding cables and intensive applications. The robust machine is particularly suitable for structural work, workshops, and industrial environments where continuity and quality are essential. Fgedpfx Aj Ai Hq Seanoi Suitable for welding steel.

Condition: used, Year of construction: 2007, functionality: not functional, Drilling center FUQ 125 -W/3 Serial number 5370 / 80355 Location: Ostrava, Czech Republic Final machine (drilling center) Manufacturer: TOS KUŘIM Year of manufacture: 2007 Fgsdpe Ai Hpmofx Aansi Parameters: Max. headstock travel in the X-axis: 3000 mm Max. headstock travel in the Y-axis: 2200 mm Sleeve extension in the W-axis: 1250 mm Sleeve extension in the Z-axis: 400 mm Spindle diameter: 125 mm Spindle: ISO 50 - Hydraulics Spindle speed: 20 – 4000 rpm Control system: CNC Heidenhain TNC 530 Main motor power: 77 kW

Condition: used, mileage: 915,469 km, power: 330 kW (448.67 HP), first registration: 12/2021, fuel type: diesel, axle configuration: 3 axles, brakes: retarder, color: other, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, trailer coupling, Manufacturer: DAF - Type/Model: CF 450 FAN - First registration: 20.12.2021 - Mileage: 915,469 km - Number of axles: 3 - Emission class: Euro 6 - Cab: M - Transmission: Automatic - Auxiliary brake: Retarder - Suspension: Air suspension with lift - Lift axle - Steerable axle - Brakes: Disc brakes - Air conditioning - Length: 8510 mm - Width: 2550 mm - Height: 3520 mm Fjdpfs Ai Hn Esx Aanjgi

Condition: used, mileage: 1,173,320 km, power: 330 kW (448.67 HP), first registration: 12/2020, fuel type: diesel, empty load weight: 7,040 kg, axle configuration: 3 axles, brakes: retarder, color: other, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, Manufacturer: DAF - Type/Model: CF 450 FT - First registration: 07.12.2020 - Mileage: 1,173,320 km - Number of axles: 3 - Emission class: Euro 6 - Transmission: Automatic - Suspension: Leaf-air suspension - Brakes: Disc brakes - Air conditioning - Length: 5920 mm - Width: 2550 mm - Height: 4000 mm - Unladen weight: 7040 kg Fjdpo Ai Hn Nsfx Aansgi

Condition: used, mileage: 892,953 km, power: 330 kW (448.67 HP), first registration: 12/2021, fuel type: diesel, axle configuration: 3 axles, brakes: retarder, color: other, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, trailer coupling, Manufacturer: DAF - Type/Model: CF 450 FAN - First registration: 08.12.2021 - Mileage: 892,953 km - Number of axles: 3 - Emission class: Euro 6 - Cab: M - Transmission: Automatic - Auxiliary brake: Retarder - Suspension: Air - Lift axle - Steerable axle - Brakes: Disc - Air conditioning - Length: 8510 mm - Width: 2550 mm - Height: 3520 mm Fgodpfx Aas Ai Hn Tsnji

Condition: used, axle configuration: 2 axles, first registration: 09/2011, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, , 2-axle tandem trailer, manufactured by Schwarte – first registration: September 15, 2011 – number of axles: 2 – suspension: air – steerable axle – axle type: BPW – brakes: disc – body manufacturer: Schwarte – tank material: stainless steel – total tank volume: 13,000 liters – tank compartments: 1 with baffle – insulated – CIP cleaning. Fgjdpfx Aao Ai Hpbjnsi

Condition: used, empty load weight: 5,890 kg, axle configuration: 3 axles, first registration: 12/2016, next inspection (TÜV): 07/2027, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, 3-axle stainless steel tank trailer – Manufacturer: Mafa/Abo – First registration: 08.12.2016 – Number of axles: 3 – Suspension: Air – Lift axle – Axle type: SAF – Brakes: Disc – Length: 10120 mm – Width: 2500 mm – Height: 3160 mm – Tare weight: 5890 kg – Next inspection date: 07.2027 – Body manufacturer: Abo – Tank material: Stainless steel – Total tank volume: 19500 L – Number of tank compartments: 3 – Insulated – CIP cleaning. Fgedpj Ai Hpfsfx Aanji

Condition: used, mileage: 828,391 km, power: 335 kW (455.47 HP), first registration: 11/2019, fuel type: diesel, empty load weight: 10,220 kg, maximum load weight: 7,780 kg, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, differential lock, onboard computer, trailer coupling, Manufacturer: Mercedes Benz - Type/Model: Actros 1846 4x2 - First registration: 11/21/2019 - Mileage: 828,391 km - Number of axles: 2 - Emission class: Euro 6 - Cab: M - Transmission: Automatic - Auxiliary brake: Retarder - Suspension: Air - Axle type: MB - Brakes: Disc - Length: 8180 mm - Width: 2550 mm - Height: 3110 mm - Unladen weight: 10,220 kg - Next inspection date: 03/2027 - Body manufacturer: Abo - Tank material: Stainless steel - Total tank volume: 13,000 L - Tank compartments: 3 - System designation: Abo Magyar Suction and Measurement System - Stainless steel centrifugal pump - Ultrakust MAK 3002 plus - Sampler probe - CIP cleaning Fodpfx Aao Ai Hpijnjgi