glass Srebrenik

Condition: used, Year of construction: 2015, Forel High Speed Hot -Melt IGU Line, comprising: Forel VW 2000 6 brush glass washer. Serial no: P15080 (2015) 2000 x 3500 (max) Forel / Soft Solution scanner. Serial no: LSC20150291 (from cabinet) Forel SQD 202. Serial no: P15081 (2015) 2 - Forel TSS 20D automatic spacer applicators. Serial no: P15082 (2015) Serial no: P15083 (2015) with guarding Forel Georgian assembly rack with Sick guard 2 - Forel CT 2000 corner tape applicators. Serial no: P15084 (2015). Serial no: P15085 (2015) Forel AFG 20D gas press / coupling press. Serial no: P15086 (2015) Forel SAHM 20D automatic heat sealing hot melt robot. Serial no: P15087 (2015) Nsdpfxo Afwtge Abuown Location: This lot is located in Wellingborough, Northamptonshire, UK

Condition: excellent (used), Year of construction: 2007, Vertical glass washing machine Maximum glass height: 3300 mm Nwodpo Afnq Nofx Abuon Working direction: from right to left 6 brushes Very good and clean condition As is Available immediately

Condition: excellent (used), Year of construction: 2015, Vertical glass washing machine Maximum glass height: 2500 mm Njdpfx Abs Afnprouswn Working direction: from left to right 6 brushes Glass thickness: from 3 to 19 mm Minimum glass size: 300 x 50 mm More technical information can be found attached as Tech. data file Excellent condition ! As is Available immediately

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Insulated glass production line Maximum IG unit size: 2000 x 3150 mm Working direction: from right to left Nodpfoz Sy Dcox Abuswn Maximum IG unit thickness: up to 56 mm Line consists of: - Inlet conveyor FOREL, - Washing machine FOREL VW2000A0SX, year: 2010, - Outlet conveyor FOREL, - Assembly and frame-mounting station FOREL, - SuperSpacer applicator TSS200A1, year: 2012, - Automatic corner tape applicator CT2000A3, year: 2012, - Inlet conveyor FOREL, - Gas filling press FOREL APGS20A3SX, year: 2010, - Conveyor FOREL. Line is capable of producing double, triple units, units with shapes and stepped units More technical information can be found attached as Tech. data file Excellent condition Good working order, tested As is See video Available immediately

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC vertical glass processing centre with waterjet Working direction: from left to right Max. glass size: 6000 x 3300 mm Min. glass size: 600 x 200 mm Glass thickness: 3 - 25 mm Max. grinding speed: 25 m/min Line consists of: - Vertical CNC glass working centre SYSTRON proHD 6033 (year: 2016), - High-pressure waterjet pump THYSSENKRUPP HPS 4037, - Vertical glass washing machine LISEC VHW-33/V8 (year: 2011). Types of processes: - Grinding (inner and outer contours), - Polishing (inner and outer contours), - Drilling/counter-sinking/milling (by waterjet), More technical information can be found attached as Tech. data file Very good and clean condition Good working order, still in production As is Available in December, 2026 Nwjdpfx Ajz Syvxobuon

Condition: good (used), Washing machine: GTA, year of manufacture: 2003 Nwodpfx Aoz Scanobusn Press: ZP 3.1, year of manufacture: 1995 Sealing unit: VFL-1D/27. Year of manufacture: 2009 Dosing unit: DOS-1PSD. Year of manufacture: 2009. Material: polysulfide. Main components: Glass washing machine with inlet and outlet up to and including the gas press, inspection station, gas-filling press with outlet up to the end of the automatic sealing unit, automatic sealing unit. System configuration: see sketch Max. glass height: 2700 mm Max. glass length: 3500 mm The washing system’s drives have been refitted with new bearings. This very well-maintained system is still in operation. Viewing is possible by appointment. Condition: good, second-hand

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 116/2024, working height: 2,500 mm, input voltage: 400 V, load capacity: 300 kg, type of input current: three-phase, power: 150 kW (203.94 HP), Equipment: CE marking, documentation/manual, Automatic robot for coating regular and irregular shapes of double- and triple-pane insulated glass. This model of automatic coating robot is economical, practical, and suitable for medium-sized and large glass factories. Nwedpsz R Skasfx Abuen It is designed for all glass manufacturers who want to automate the coating process of insulated glass, thereby reducing workload, saving on labor costs, and improving production efficiency. It ensures a significant reduction in production time due to greater coating precision, thereby eliminating wasted time and materials. The robot is entirely manufactured by BATTELLINO in Italy.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 8,200 mm, total width: 3,800 mm, overall weight: 5,250 kg, Tiltable automatic float glass cutting table for jumbo sizes : 6000 x 3210 mm min. glass size : 350 x 180 mm glass thikness : 2,3 - 19 mm Nwjdpfx Aboz N Dqueujn This table has NO option for low e deletion

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, total width: 2,500 mm, total height: 3,500 mm, input voltage: 400 V, feed length X-axis: 2,500 mm, feed length Y-axis: 3,500 mm, overall weight: 3,550 kg, type of input current: three-phase, power: 17.06 kW (23.20 HP), Equipment: documentation/manual, Used Lisec VL-1N/25 insulating glass manufacturing machine for sale, year of manufacture: 2009. Type: VL-1N/25 Serial number: 361-053012 Weight: 3,550 kg Total load current: 24.60 A Apparent power: 17.06 kVA Voltage: 3/N/PE-50Hz 400 V Pressure: 6.00 bar Maximum material load: 250 kg/m Auxiliary current: 8.0 A AC/DC voltage: 400 / 24 V LISEC VL-1N/25 automatic thermal insulating glass sealing robot – 2500 x 3500 mm. Automatic edge sealing machine designed for applying secondary sealant to thermal insulating glass units. The machine consists of an infeed and an outfeed section, as well as a discharge station. A separate measuring unit located in front of the machine measures the thickness of the glass panes, the air gap between them, and the total thickness of the thermal insulating glass unit. The top edge of the thermal insulating glass unit is guided by a horizontal roller beam. This allows the glass units to pass at a defined distance in front of the back panel in the sealing sections. They are transported using a patented, wear-resistant conveyor chain, which supports the lower edge of the unit only minimally, leaving the sealing groove free for the application of the sealant. A linear-guided vacuum suction system integrated into the back panel ensures that the thermal insulating glass units are transported without slipping. The machine can also process polyurethane in 200-liter containers of component "A" + 20-liter containers of component "B", as well as silicone in 200-liter containers of component "A" + 20-liter containers of component "B". Nwedpfx Abjz Nkh Touen The machine can be viewed in operation and will be dismantled in mid-January. If you have any questions or require further information, please send us a message or call us.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, Glastronic-made 1600mm vertical glass washing and drying machine. The machine is in a well-maintained and inspected condition, ready for immediate use. Njdpfxez Ngyre Abujwn New squeegee rubbers, new bearings. Working direction: left to right. Maximum washable glass height: 1600mm. Number of brushes: 4. Drying fan. Stainless steel cabin. Water heating. Backlighting. Stop sensor. The machine has been fully inspected, cleaned, and is in perfect working order and can be viewed at our facility!

Condition: used, Year of construction: 2002, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Automatic Lisec butyl application machine, left to right, year 2002, consisting of: FRS-25Z, overhead frame conveyor for supply Nodpfx Aoz Ipcrebuswn RZVS-25/25, frame lift (down to butyl machine level), including frame measuring device LBH-25AR, automatic butyl application machine, 2×7,5 kg butyl cylinder capacity, suitable also for Georgian bars RAVS-25/25, frame lift (up to overhead frame conveyor) FRS-25A, overhead frame conveyor down to frame set section The machine is available from our stock in Hofkirchen/Austria and can be seen in our warehouse on appointment

Condition: excellent (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, total length: 40,000 mm, total width: 4,000 mm, total height: 4,500 mm, working height: 2,500 mm, input voltage: 400 V, overall weight: 48,000 kg, type of input current: three-phase, Equipment: documentation/manual, Complete line for the production of single and double-pane insulated glass units, including: Automatic bending machine for frames FB-H PC system Automatic spacer filling machine DF-R-V Automatic insulated glass production line IGL-G-H2 (with automatic argon filling at a minimum level of 90%) Automatic sealing robot (two components) ASR-H2.5 Butyl applicator BE-A Rotating table RT-A Frame transporter Technical data: 1) Power supply: AC380V, 50Hz, approximately 45KW 2) Air pressure: 0.6~0.7MPa 3) Dimensions: 33250(L)×3000(W)×3000(H)mm 4) Max. load: insulated glass unit approximately 850kg, suction side approximately 400kg 5) Min. glass size: 450×350mm 6) Max. glass size: 5000×2500mm 7) Insulated glass unit thickness: 14~70mm 8) Working height: 530±30mm 9) Transporter speed: 35m/min 10) Inclination angle: 6°~8° Nwsdpfx Aez Ihhtebuon 11) Glass thickness: 4-15mm 12) Bristle diameter: 0.12mm 13) Max. washing speed: 0-10m/min adjustable 14) Average expected output: 1 m2 (1000x1000mm) of rectangular insulated glass units with the configuration (6mm+9A+6mm), for example, approximately 550 units per 8 hours with automatic gas filling, approximately 650 units per 8 hours without gas, for single-pane units (depending on the current factory situation and employee efficiency).

Condition: excellent (used), Year of construction: 2012, Automatic spacer bar bending machine With profile magazine Possible to bend aluminium, steel, stainless steel and warm-edge (plastic) spacer bars All shapes according to LISEC shape catalogue More technical information can be found attached as Tech. data file Very good and clean condition Good working order, tested As is Available immediately Nwjdpfoz D Azgox Abusn

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: L-275.0335 / L-288.0125, total length: 6,000 mm, total height: 3,800 mm, overall weight: 350 kg, Bystronic Swivel Crane with Suction Device Bystronic Swivel Crane - Model: SSK2 - Year: 2015 Nedpfsz Dphgjx Abuown - Height: 3800 mm - Arm Length: 6000 mm - Load Capacity: 500 kg Bystronic Suction Device - Model: EK 250 - Year: 2015 - Load Capacity: 250 kg - Weight: 80 kg - Pneumatically operated - 90° Tilting Disassembly and installation can be performed by our service team upon request. Immediately available.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, total length: 27,000 mm, total width: 4,500 mm, total height: 2,300 mm, Equipment: documentation/manual, COMPLETE IG LINE – LENHARDT / GAS FILLING PRESS / CORK APPLICATOR / EUROWATER Installation Layout: Right to left Type / dimensions: 2,300 × 4,500 mm Total length: Approximately 27 metres Year of manufacture: 1995–1998 Condition: Currently in production Description * Infeed conveyor to washer * Low-E glass washer, 3–45 mm, 8 brushes – year 1997 * Outfeed conveyor from washer * Assembly station * Infeed conveyor to press * Automatic gas filling press, 12/60 mm – year 1996 * Outfeed conveyor from press * Cork applicator – year 1998 * Eurowater water installation The machine is currently in operation and can be inspected by appointment. Nodpjz Aur Dofx Abuewn The machine will be available from September, subject to agreement. Price: Ex Works, excluding transport. Included: Dismantling and loading onto the buyer’s transport. For further information, please contact us via WhatsApp.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 102 299940 0889, total length: 3,000 mm, total width: 800 mm, total height: 1,500 mm, input voltage: 380 V, overall weight: 620 kg, type of input current: three-phase, Lisec butylextruder, technically refurbished at our warehouse. Nodjz Ar Sbepfx Abuswn

Condition: like new (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, overall weight: 995 kg, type of input current: three-phase, power: 4 kW (5.44 HP), Manual Lisec 2k sealing machine for Polisulfide, year 1998, running on PS, completely overhauled (technically and optically as new). Nsdpfx Ajz Ahqmsbuswn The overhauled machine is now available EXW from our warehouse in Oroshsza/Hungary.

Condition: good (used), functionality: fully functional, total length: 1,400 mm, total width: 1,300 mm, total height: 3,450 mm, overall weight: 520 kg, filling system for desiccant granulate Nedpfxez Ahi Ae Abuewn system drills ans fills automatically

Condition: good (used), Year of construction: 1997, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, input voltage: 400 V, overall weight: 740 kg, Manual Lisec butylextruder in good working order 2 x 7,5 Kg butyl storage cylinder for application of profiles from 6 - 24 mm width Nwjdpfxjz Ag Sie Abusn

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, total length: 35,000 mm, total height: 3,500 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Bystronic IG production line for glass units Maximum size: L4200 x H2700 Minimum size: 180 x 350 mm (double, triple, and shaped glass) An automatic butyl extruder can be offered as an option. Contact us at 0032479588591 to arrange a visit. Nwodpjzxx Etjfx Abuen

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Lisec VHW - 25/6M Washing Machine - Year: 2008 - Weight: 4,878 kg - Power: 75, 10 A - Brushes: 8 - Includes pre-washing zone - Glass thickness: 3-20 mm Inspection possible at our location. Nodpozxttfefx Abuown Please contact us for more information.

Condition: good (used), Year of construction: 1997, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, input voltage: 400 V, overall weight: 850 kg, type of input current: three-phase, Manual Lisec butyl extruder LBH-25V, 1997, in good working order. 2x7,5 kg butyl storage cylinder for application of profiles from 6-24 mm width Nsdpfozxg Tlsx Abuown The machine is availabel from our stock in Hofkirchen/Austria and can be seen there on appointment

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: L-232.0495, total length: 12,000 mm, input voltage: 400 V, feed length X-axis: 2,300 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, Automatic butyl extruder in excellent condition, technically refurbished by Glaston in 2025. Upgrades to the operating panel and replaced parts are listed; please contact us for more information. Nsdpfozw Erwox Abuswn Maximum size: 2300x2500mm Minimum size: 250x250mm, but not suitable for Georgian bars.

Condition: excellent (used), Georgian bar assembly table Complete Nodpfx Ajztyw Tobuewn In very good and clean condition Good working order, tested As it is Available immediately

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, total length: 11 mm, total width: 2,500 mm, total height: 3,500 mm, working height: 520 mm, input voltage: 400 V, overall weight: 6,000 kg, type of input current: three-phase, power: 60 kW (81.58 HP), Lisec glass washing machine VHW-25V8, year 2002, working direction left/right, with 8 brushes for low-e, including following: - inlet conveyor (3,3 m) maker MBR (Maschinenbau Radovanovic) Nwjdpfx Abjzq S A Nsujn - Glass washing machine VHW-25V8 - outlet conveyor (4,4 m), maker MBR - 2 hot water tanks - 2 sandfilter - 1 blower The machine is in very good working order and is available from current location in Germany by the end of October