IBR-Retzer

Condition: ready for operation (used), maximum spindle speed 6000 rpm for Deckel FP Kedpsy D T Hxsfx Am Esdk

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Deckel Maho Machining Centre 5-Axis Simultaneous Kjdpfey D Nfdjx Am Ejdk Type DMU 80 P Year 1998 Heidenhain CNC With Tooling

Condition: used, Year of construction: 2015, operating hours: 10,700 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, nominal power (apparent): 48 kVA, controller model: Heidenhain TNC 640, table width: 800 mm, table length: 650 mm, rotary table diameter: 650 mm, overall weight: 11,600 kg, spindle speed (max.): 20,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, We are offering this used DMG MORI DMU 75 monoBLOCK universal machining center, year of manufacture 2015. Machine type: DMU 75 monoBLOCK Serial number: 12430004943 Year of manufacture: 2015 Maximum spindle speed: 20,000 rpm Weight: 11,600 kg Phases: L1, L2, L3, N, PE Kodpfx Ajy Dq Hpjm Ejdk Connected load: 48 kVA Maximum operating current: 70 A Fuse protection: 80 A Short-circuit current: 0.80 kA Motor voltage: 440 ±10 V Mains voltage: 400 V Frequency: 50 Hz Auxiliary voltage AC: 230 V Auxiliary voltage DC: 24 V Internal coolant supply: 40 bar Tool holder: SK40 Operating hours: CNC on: 33,043 h Machine on: 30,184 h Program run: 13,471 h Operating time: 10,700 h If you have any questions or need further information, please do not hesitate to contact us. The machine is located in Osterode/Harz and can be inspected by appointment. This is a used machine and therefore sold with exclusion of any warranty.

Condition: like new (used), Year of construction: 2005, operating hours: 3,847 h, Universal Milling Machine DMU 50 (3+2 Axis Machining) Year of manufacture: 2005 Kdedpfx Amjy Dcnrs Ejk Spindle run time: 1,315 h Control: Heidenhain iTNC 530 Working area (travel): X-axis ..... mm ..... 500 Y-axis ..... mm ..... 450 Z-axis ..... mm ..... 400 C +/- 360° B +110° / -5° Spindle (Power package) Tool holder: SK 40 DIN 69871 Spindle speed: steplessly programmable from 20 - 10,000 rpm Rotary Table Dimensions: D630 x 500 mm T-slot spacing and size/diameter: 63 / 14H7 mm Center bore diameter: 30H6 mm Rapid traverse B and C-axis: 6 revolutions per minute Table rotation: 360 degrees Swivel range: 115 degrees (from -5 to +110 degrees) Table clamping: hydraulic Tool magazine Magazine positions: 16 Max. tool diameter: see tool section Max. tool length from spindle face: 300 mm Max. tool diameter at 8,000 rpm: 130 mm Max. tool diameter at 10,000 rpm: 80 mm Max. tool weight for automatic tool change: 6 kg Max. total tool weight in magazine: 50 kg Accessories 3D probe (Heidenhain) Tool holders SK 40 The machine was used for single-part production in prototype manufacturing. The machine is immediately available. Can be inspected under power at the seller's location. Location: Rhein/Main

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With Heidenhain iTNC 530 path control Year of manufacture: 2005 Travel distances: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm stepless (HSK 63) With the following accessories: Rigid angle table, 1250 mm x 700 mm clamping surface 3D measuring probe Heidenhain Kodpfx Ajy A Sf Rsm Ejdk Tool measurement in the working area via BLUM Laser Vertical tool changer with 32 magazine slots (HSK 63) Full protection enclosure with sliding doors and internal lighting Electronic handwheel Operating modes 3 + 4 Chip conveyor Coolant system 3 height-adjustable machine mounts Spindle oil cooler Control cabinet cooling unit (Rittal) Operating manuals

Condition: excellent (used), Year of construction: 2008, Deckel Maho DMG DMU 50 eVo linear Year: 2008 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 rpm Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Cooling Cooling through the Spindle Center : 40 bar Tool system Tool holder: SK40 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Weight 5900 kgs Accessories/options: Chip conveyor Blum touch probe Blum Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Coolant tank with high pressure coolant pump, paper band filter system With tool holders, SK40 type, 25 pieces Full set of documentations Under power in our warehouse! Video available upon request! Kdodey Ap D Dspfx Am Eok

Condition: ready for operation (used), Year of construction: 2001, Immediately available ex-site: 5-Axis Machining Centre Deckel Maho Model: DMU 50 M Year of manufacture: 2001 Control system: Heidenhain TNC 124 5 axes (3 + 2) Manual rotary axes with B and C swivel rotary table B and C axes are displayed on the control Table size: 700 x 500 mm Kodey Alr Dspfx Am Eodk Travel paths X/Y/Z: 500 / 400 / 400 mm Table load capacity: 200 kg Spindle taper: SK 40 Spindle speeds: 20 – 4,500 rpm Drive power: 9 / 13 kW C-axis rotation range: 360 degrees Swivel range: plus 95 / minus 10 degrees Feed rate up to 5,000 mm/min Spindle speeds: 20 – 4,500 rpm Weight: 3 tonnes Coolant system Price: EUR 8,500.— net, ex-site, plus VAT.

Condition: used, Year of construction: 2004, operating hours: 47,288 h, functionality: fully functional, machine/vehicle number: 11120011383, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC530, table width: 600 mm, table length: 1,000 mm, table load: 350 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 15,344 h, coolant supply: 17 bar, spindle motor power: 15,000 W, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis milling machine with production package IKZ 17 bar, active motor spindle cooling Kodpfxsy Ahw Nj Am Esdk

Condition: good (used), Year of construction: 2019, We offer this good DMG MORI DMU 50 universal machining center, year of manufacture 2019. Manufacturer: DMG MORI Model: DMU 50 Year of manufacture: 2019 Condition: good Category ID: 1457 Kjdpfx Amey Ahryo Ejdk Type ID: 4166 Machine type: universal machining center If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, condition Defekt/Ersatzteilträger manufacture Mikron type HSM 400 U The machine is defective and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Kjdpfx Aoyzt A Uem Esdk Prior sale is reserved.

Condition: like new (used), Year of construction: 2018, operating hours: 1,294 h, functionality: fully functional, Röders RXP 601 DSH – 5-Axis High-Precision Milling and Grinding Center Machine hours: 1294 (5. March 2026) General Machine Data Manufacturer: Röders TEC GmbH (Germany) Machine Type: 5-Axis CNC Milling and Grinding Center Model: RXP 601 DSH Design: Vertical High-Speed ??Machine Axis System: X / Y / Z + A / C Drive System: Direct drives in all linear and rotary axes Measuring Systems: Optical direct measuring systems in all axes Thermal Management: Active temperature stabilization of all main components Workspace & Mechanics X-axis travel: 540 mm Y-axis travel: 635 mm Z-axis travel: 400 mm A-axis swivel range: ±115° C-axis continuous rotation (360°) Max. workpiece weight: up to 200 kg Machine weight: approx. 10,200 kg Space requirement (L×W×H): approx. 2,950 × 2,950 × 3,100 mm Spindle system Spindle manufacturer: Levicron Spindle type: High-precision air-bearing milling and grinding spindle Bearing: Air bearing, operating pressure up to 10 bar Tool holder: HSK 25 (HSK-E depending on the version) Application: High-speed milling and precision grinding Thermal properties: Virtually frictionless, minimal heat input Grinding equipment: • Integrated grinding function in the CNC control • Optimized axis control for grinding processes • Vacuum Z-axis compensation to relieve stress on the Z-axis • Thermally stabilized Z-axis for maximum dimensional accuracy • Suitable for coordinate, profile, and fine grinding Peripheral systems: Extraction: Industrial extraction system for milling and grinding operations Oil treatment: Filter and treatment system for Grinding oil Cooling lubricant Temperature control Kdsdpfsyziacex Am Ejk Chip disposal Oil-based grinding medium Active media temperature control Integrated screw conveyors All information provided to the best of our knowledge, subject to technical modifications.

Condition: excellent (used), Year of construction: 2012, CNC Control: Heidenhain TNC 620 Axes X-axis travel (mm): 500 Y-axis travel (mm): 450 Z-axis travel (mm): 400 C-axis indexing (degrees): 360° (0.001°) B-axis indexing (degrees): -5° to +110° (0.001°) Feed rates (m/min): 12 Rapid traverse (m/min): 12 Ksdpfx Amsyzar No Esdk Work Table Pallet dimensions (mm): ø630×500 Max. workpiece weight (kg): 200 Spindle Max. spindle speed (rpm): 10,000 Spindle drive power (kW): 9/13 (100% DC/40% DC) Tool System Tool holder: SK-40 Number of tools in magazine: 16 Max. tool diameter (mm): With free adjacent pockets (mm): ø130 With adjacent pockets occupied (mm): ø80 Max. tool length (mm): 300 Max. tool weight (kg): 20 Signal beacon CE conformity Coolant gun Direct XYZ measuring system Probe Handwheel Tool measurement Machine operating hours: Power-on hours: 28,826 Spindle working hours: 14,423 Geometry and spindle in very good condition

Condition: excellent (used), Year of construction: 2025, Like new very good Kdsdpsyy Dc Aefx Am Ejk

Condition: good (used), Year of construction: 2016, CNC Control Axes X-axis travel mm: 1050 Y-axis travel mm: 530 Z-axis travel mm: 510 4th axis: DDRT-260X Feed rate m/min: 5 Rapid traverse m/min: 30 Work Table Number of pallets: 1 Table dimensions mm: 1350x600 Maximum workpiece weight kg: 1200 Table surface configuration: 18mm T-slot, 6 units Spindle Spindle speed rpm: 8000 Kdsdpeyyc Dlofx Am Eek Spindle power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool System Tool holder: MAS-BT 50 Tool magazine positions: 30 With adjacent positions free mm: 240 With adjacent positions occupied mm: 120 Maximum tool length mm: 350 Maximum tool weight kg: 20 Tool change time s: 2.34 Equipment Chip conveyor Internal coolant supply Rated power kVA: 52 Machine basic dimensions / weight Length mm: 3300 Width mm: 3000 Height mm: 2800 Weight kg: 7700

Condition: used, operating hours: 22,802 h, functionality: unexamined, machine/vehicle number: 71401454, controller model: MillPlus, MACHINE DETAILS Control: MillPlus Electrical data Voltage: 400 V Kdjdpeyx U Nqjfx Am Esk Frequency: 50 Hz Operating hours Operating hours: 37,732 h Spindle hours: 22,802 h

Condition: reconditioned (used), Year of construction: 2007, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Siemens, controller model: 840D, rotary table diameter: 800 mm, spindle speed (max.): 14,000 rpm, coolant supply: 20 bar, input voltage: 400 V, DMU 70 3+2 axes The machine is currently being overhauled. New spindle New Y & Z axis guides Bellows Inspection windows Measured with BallBar incl. protocol Siemens 840D with Shopmill - handwheel 14,000 rpm SK40 spindle 30-position tool changer Internal coolant 20 bar Tank system with band filter 600 l Chip conveyor Cabin roof Kjdjyx Am Ropfx Am Esdk Measuring probe Rinse gun Operating mode 4 Documentation Available from 04/2026

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Direct from toolmaking department: DECKEL MAHO DMU 50 – year of manufacture 2005 – Heidenhain iTNC 530 – 3-axis machine – travels X500 x Y450 x Z400 – SK40 – 8000 rpm – without WW – low operating hours, used only as a standby machine, extremely stable and in top condition, also very well suited as a training machine, minimal space required: 1.70 m wide x 2.00 m deep, for sale only due to lack of space, machining test and geometric measurement welcome. Ex works, free loading. Ksdpfxjyxy Rte Am Esdk

Condition: excellent (used), Year of construction: 2008, operating hours: 50,000 h, functionality: fully functional, Technical Details: Manufacturer: DMG Deckel Maho Kjdpfxsyxp E He Am Ejdk Model: DMU 70 Year of manufacture: 2008 Origin: Germany Voltage: 400 V Frequency: 50 Hz Connected load: 34 kVA Max current: 51 A Fuse protection: 63 A Control voltage: 230 V / 24 V Working hours (approx.): 50,649 h / 18,780 h (as shown on display)

Condition: used, Year of construction: 1999, machine/vehicle number: 71.28, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, distance table to spindle center: 750 mm, CNC machining center Kdedpsyxmiiofx Am Ejk

Condition: not inspected (used), Year of construction: 2016, operating hours: 21,228 h, machine/vehicle number: 127300000073, travel distance X-axis: 2,100 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,250 mm, overall weight: 46,000 kg, spindle speed (min.): 12,000 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 80 bar, 5-axis CNC universal machining center with controlled B-axis and NC rotary table (C-axis). Large working area approx. 2,100 x 2,100 x 1,250 mm. Equipped with a powerful SK50 spindle (52 kW, 430 Nm, up to 12,000 rpm) and internal coolant supply up to 80 bar. Tool changer with 60/63 positions (chain/wheel magazine, double gripper). Very well equipped with Blum Laser, 3D quickSET, ACC, and MPC. Including chip conveyor, oil mist separator, and coolant system. Kdedjyxmicjpfx Am Esk Control ON: 47,888 h – Operating hours: 21,228 h

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 11790001067, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 40 kVA, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, total height: 2,600 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 6,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 24, tool diameter: 40 mm, DMG SAUER ULTRASONIC HSC LINEAR 20 HSC Machining Center Kodpjyxckvsfx Am Eedk - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 100 A - Connection: 40 kVA - Input unit X/Y/Z axis: 0.001 mm - Travel measuring system resolution X/Y/Z axis: 0.001 mm - Position tolerance in X/Y/Z axis with direct measuring system: 0.005 mm - Tool holder: HSK-32 E - Max. tool length from spindle nose: 200 mm - Max. tool weight for automatic tool change: 1 kg, total tool weight in magazine: 24 kg - NC rotary table with swivel axis - C-axis clamping surface: 190 mm diameter - Swivel range: 360° - Rotary table speed: 150 rpm - A-axis swivel range: -5/+130° - Loading capacity: max. 10 kg - Including the tool holders shown in the photos in the tool magazine - Also includes an additional external tool changer system (30-position) from manufacturer ROBOWORKER, type: LM 100 Note: The machine can be transported on a standard truck! Note: This item is available immediately! FCA D-73235 Weilheim Teck – loaded onto truck

Condition: used, Year of construction: 2019, x-travel 500 mm y-travel 450 mm z-travel 400 mm control SlimLine Siemens turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 table surface area 630 x 500 mm max. table load 200 kg Swivel range B: -5 / +110 ° rotation range C: 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 8,0 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm change-time tool to tool 2,7 sec change-time chip to chip 7,0 sec Kodpfoyw Titox Am Ejdk rapid traverse X/Y/Z: 30 m/min Feed force 4,5 kN feed speeds 1 - 30.000 mm/min total power requirement 30 kVA weight of the machine ca. 4,7 t dimensions of the machine ca. 4,5 x 3,5 x 3,2 m CNC - Milling Machine Universal DMG MORI - CMX 50 U - 5 Axis - swivable rotary table - Spindle-hrs.: only ca. 2264h - Power On Hours: ca. 6706h - incl. div. cutting inserts, milling cutters, mounting aids

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. Kdjdpfx Aeyw Naujm Eok Technical details are shown on picture.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you the following: Manufacturer: DMG Mori Model: CMX 50 U Year of manufacture: 2019 Control unit: Slimline Siemens Operate Travel distances: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: -5 to +110 ° C-axis: 360 ° Main spindle: Tool holder: SK 40 Kdedoywlkcspfx Am Eok Spindle speed range: 20 - 12,000 rpm Main spindle drive power (100/40%): 13 / 9 kW Working table: Table size: D 630 x 500 mm Tool changer: Number of tool pockets: 30 positions Rapid traverse rates: Rapid traverse (X/Y/Z): 30 m/min Operating hours: approx. 7,070 h Spindle hours: approx. 2,800 h Technical features & accessories: - Direct linear measuring system in x, y, and z axes, including air purge - Air blow switching via M function - Production package, consisting of: - Internal coolant supply 12 bar - Chip conveyor, 250 l tank - Bed flushing via M function - Coolant spray gun - Machine enclosure roof - 4-color signal lamp - Renishaw measuring kit, consisting of: - Touch probe PP40 - Tool measurement TS27R - Tool breakage monitoring - Calibration tool - Preparation for 3DquickSET Accessories, tools, and clamping devices shown are only included in the scope of delivery if specified in the additional information. Technical data and specifications are subject to change and errors. Prior sale reserved!

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Very nice Deckel Maho FP1 Kdjdpjywlakjfx Am Esk From the latest model! Comes from a toolmaking workshop. UNIQUE MACHINE With feed on the Y-axis.