Mormac Machinery GmbH & Co. KG

Condition: excellent (used), Year of construction: 1988, REX HOMS 1100 four-sided planer, year of manufacture 1988 - max planing width 1100cm - max planing height 32cm - 4-knife shafts, diameter 20cm, hydraulic knife mounting - smooth feed speed adjustment - 10kW bottom motor, 15kW top Dre8Mh - bottom and top pulling rollers Machine in very good condition.

Condition: ready for operation (used), Functionality: fully functional, Planing machine - Wood width 50 - 420 mm - Wood thickness 2-sides 300 mm - Wood thickness 4-sides 300 mm - Feed speed 5 - 30 m/min - Feed motor 22 kW Arrangement of the spindles 1. Horizontal spindle below, motor 15.0 kW, hydro planing head 200x430 Z6, steel 2. Horizontal spindle above, motor 18.5 kW, hydro planing head 200x430 Z6, steel 3. Vertical spindle right, motor 18.5 kW, planing head 160x300 /4, aluminum 4. Vertical spindle left, motor 18.5 kW, planing head 160x300 /4, aluminum 5. Chamfering units above 2 x 2.2 kW - Upper part with 6 lifting columns - Vertical spindles with counter bearing - Extraction unit with 2 upper steel rollers driven Bwc89R398E - Positioning control for wood thickness and width with functional guarantee

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Dq7Zot Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 610 mm Maximum working width 610 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Bf7F0N9Ewo Latest generation IE-3 motors Spindle and feed brakes CE

Condition: used, Double-sided planer MIC AM2 Max working width 510mm Roll up and down 2 knives per planer head - Documentation available: No Zx2Qyqpse Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1996, Double-sided planer REX HOMS 630 Serial No. 16831 380V, 102.6Amp 67.5HP Dqzwzl Equipped with 3 planing shafts 1st under 15kW 2nd under 11kW 3rd above 18.5kW Max planing width 630mm Min-max planing height 10-310mm Max chip removal upper planing shaft 15mm Max chip removal lower planing shaft 10mm - Year: 1996 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), CATALOG NUMBER 7503 Dql9F2 TECHNICAL DATA: - max planing width 610mm - max planing height on both sides 200mm - max planing height on four sides 100mm from above: - 2 rubber pulling rollers - 2 toothed pulling rollers - metal pulling roller - pulling input shaft, toothed - pawls - pressure - pulling shaft, toothed 2pcs - pressure - planing shaft 610mm, 4-knife 7.5kW - pressure - pulling roller, smooth, metal - pressure - profiling shaft 7.5kW - pressure - rubber pulling roller from below: - scoring unit, 35mm axle, 130mm axle length 2.2kW - guide strip 2pcs - feeder table - smooth pulling shaft - 610mm planing shaft, 4-knife (2 knives installed) 7.5kW - 2 smooth pulling shafts - sliding roller, metal, divided - side pressure at the back: - side spindles + pressures 2 - 1) vertical right 95mm 4kW - 2) vertical left 95mm 4kW - spindle diameter 35mm - adjustable spindles up/down, right/left - adjustable rollers in the lower table - electric setting of planing thickness - 6 types of feed speed 7/9/11.5/14/18/23m/min - feed motor 3.1kW - diameters of the extraction nozzle 3×120, 3x160mm - dimensions length/width/height 3150x1900x1600mm - weight about 3500kg ADVANTAGES: - the best wide planing machine for wet and dry wood - ideal for processing logs, flooring, etc. - additional profiling shaft and undercutter - manufactured by the German brand KUPFERMUHLE - used planer, very good condition Net price: PLN 66,900 Net price: EUR 15,750 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: reconditioned (used), Year of construction: 1982, Functionality: fully functional, REX HOMS 630 four-sided planer year of manufacture-1982 planing height 200 m Cccpf3W planing width 630 cm 4 head machine bottom-7.5 kW upper-7.5 kW right -5 kW left -5 kW feed -7.5 kW shafts - 50 mm speed 36 m/min all hydraulic heads included

Condition: excellent (used), Planing width 310 mm HEIGHT 300 4 SHAFTS THERE IS A VIDEO You can call or write to us. We can speak and write in German and Russian. You can also send messages in English. Iswghcm 17.6.1.

Condition: excellent (used), operating hours: 425 h, Functionality: fully functional, 4-sided carpentry, construction timber and universal planing machine Working width max. 410 mm Working height 2 sides max. 260 mm Working height 4 sides max. 250 mm Horizontal bottom 7.5 kW Horizontal top 11.0 kW Vertical right 7.5 kW Vertical left 11.0 kW Chamfering units top 2 x 1.85 kW Feed 3 kW with speed 5 - 30 m/min 01-Automatic braking devices Fzjcehc 02-Positioning control PST 118 for wood width 03-Positioning control PST 118 for wood thickness 04-Horizontal planing heads bottom + top are interchangeable 05-KARDAN drive shafts feed 06-Gap between vertical milling cutter and pull-out unit for the subsequent installation of another unit 07-Vertical shafts diameter 50 mm 08-Vertical shafts can also work as floating units for chip-saving side processing that follows the curvature of the wood 09-Machine tested with 6-month guarantee

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Dmu0Q2 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change Cuo7Ny7Vim 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 1994, Condition: excellent (used), 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm. Pgcudtt

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Bczb3Yig Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: repair required (used), 4-SIDED CARPENTRY PLANER : Brand: PINHEIRO MACHINING CAPACITIES : - Planing width: 500 mm - Max. 2-sided planing thickness: 200 mm - Standard spindle moulder height: 150 mm - Possibility of mounting thickened tool holders, height 200 mm - Minimum working length: 250 mm MACHINE FEATURES : Cfiyedg3We - Motor 1 Upper horizontal shaft: 7.5 kW 2880 RPM - Motor 2 Lower horizontal shaft: 11 kW 2880 RPM - Motor 3 Right vertical shaft: 11 kW 2920 RPM - Motor 4 Vertical shaft Left: 11 kW 2920 RPM - Star-delta starting - Machine power supply: 380 V. Three-phase 50 Hz - Total installed power: approx.43.5 kW - Control voltage 24V - Electrical raising and lowering on control panels - Metric pass thickness indicator Machine supplied with tools and irons mounted - Shafts with 4 knives, - Horizontal shafts L. 530 mm - Vertical shafts: Ø 40 x h.150 mm - Tool holders Ø 125 mm - Steel drive rollers: helical at infeed, smooth at outfeed - Sturdy frame with cast-iron table (L x W): 850 x 500 mm - Upper intake: Ø 180 mm, lower: 150 mm Transport dimensions: 2700 x 1300 x h.1700 mm Weight: approx. 1500 kg Please consult us for the supply of consumables, accessories and/or vacuum systems. Machine offered as is, reserved for export due to standards. Prices ex-store. Delivery on request.

Condition: new, Year of construction: 2021, V-hold 4-sided, 5-spindle planer, model VH-M 521 - width from 25 to 230 mm - height from 8 to 160 mm 1st from the bottom - 7.5 kW 2nd from the right -7.5 kW 3rd from the left -7.5 kW 4. from the top -11 kW 5. from the bottom - 7.5 kW - 5.5 kW feed from 6 to 36 m / min - revolutions 6500 / min - diameter of the spindles 40 mm - feed for short, opposite the right spindle - pressure in front of and behind the upper spindle. - manual table lubrication pump - machine weight 3100 kg P9Caz In stock

Condition: reconditioned (used), Year of construction: 2010, Functionality: fully functional, 4-side planing machine with constant table high planing width 600 mm planing height 250 mm down 7.5 kW above 7.5 kW right 5,5 kW left 5,5 kW feed hydraulically interchangeable planing heads horizontal wood intensity adjustment electric chip removal down electrically You as a customer can choose in which state the machine should be delivered Z8Nlhd0N

Year of construction: 1996, Condition: used, Planer Rex Homs 310 With scoring saw from below Planing shafts top and bottom Planing width 310 mm without feed. Feed was here from the endless press of the zinc plant U9Zoela7O