Zölch GmbH & Co. KG

Condition: used, Year of construction: 2003, functionality: fully functional, Sale only within the EU. Dismantling and loading will be carried out by the seller. Transportation will be handled by the buyer. Dkodpsz N Eakjfx Al Sju

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 330 mm, table load: 250 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 21, tool weight: 2,000 g, number of axes: 3, This 3-axis HAAS DC-1 was manufactured in 2024. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 330 mm. The machine includes a robust table size of 700 x 420 mm and a maximum table load of 250 kg. If you are looking to get high-quality machining capabilities, consider the HAAS DC-1 vertical machining centre we have for sale. Contact us for further details. Dkodpfxoz Nytfe Al Ssu • Working hours: 0 (showroom machine) • Spindle nose to table: max 18.9 in / 480 mm; min 5.9 in / 150 mm • Spindle: max torque 14.0 ft-lbf @ 2500 rpm / 19.0 Nm @ 2500 rpm; inline direct-drive; taper BT30; grease-packed bearings; liquid-cooled • Table: 27.6 in / 700 mm (L) x 16.5 in / 420 mm (W); T-slot width 0.550 in / 14 mm; T-slot center distance 4.92 in / 125 mm; 3 T-slots; max load 550 lb / 250 kg (evenly distributed) • Feedrates: max cutting 1200 ipm / 30.5 m/min; rapid (X/Y/Z) 1890 ipm / 48.0 m/min • Max thrust (X/Y/Z): 2054 lbf / 9137 N • Tool changer: turret; capacity 21; max tool dia (full) 2.4 in / 60 mm; max tool dia (adjacent empty) 3.1 in / 80 mm; max tool length 7.90 in / 200 mm; tool-to-tool 1.50 s; chip-to-chip 2.50 s • Max tapping speed: 5000 rpm • Coolant capacity: 40 gal / 151 L • Air: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar; inline air hose 3/8 in; air coupler 3/8 in; min pressure 80 psi / 5.5 bar • Power: 3-phase 220 VAC (FLA 40 A) or 440 VAC (FLA 20 A) • Shipping: 100.0 in x 79.0 in x 100.0 in / 254 cm x 201 cm x 254 cm; weight 7040 lb / 3402.0 kg Additional equipment • CW-5200 industrial chiller • Chip conveyor Technical Specification Taper Size BT 30

Condition: good (used), Year of construction: 2011, Machine is in good working condition. Parts shown by hand not come. Dsdpfxez Nx Ubo Al Ssku

Condition: good (used), Year of construction: 2013, Travel ranges (working area) X-axis: 660 mm Y-axis: 406 mm Djdpsz Nktvsfx Al Soku Z-axis: 508 mm Spindle nose to table: approx. 102 to 610 mm Coolant system Feed rate / rapid traverse (X / Y / Z): 28 / 28 / 28 m/min Tool changer: Magazine for up to 24 tools (SK40) Max. tool weight: 7 kg

Condition: used, Year of construction: 2002, machine/vehicle number: 810715, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Siemens, controller model: 810D, table width: 500 mm, table length: 800 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: DC, Equipment: chip conveyor, documentation/manual, Vertical machining center DECKEL MAHO DMC 63V Year of manufacture: 2002 Dkjdpfsz Nhizox Al Seu Machine number: 810715 Condition: Used Delivery terms: Free on truck Location: 57482 Wenden Availability / Collection date: The machine is expected to be available in November 2026 and must be collected on a fixed date to be agreed upon (likely in calendar week 48-2026). Payment terms: Payment in advance - by bank transfer Internal no.: 181-1 Can be inspected while running: Yes Technical data: Control: Siemens Sinumerik 810D Tool holder: SK 40 Operating hours: 76,500 (will increase slightly, as the machine is still in production until collection) Spindle hours: 24,100 (will increase slightly, as the machine is still in production until collection) Travel distances X / Y / Z: 630 / 500 / 500 mm Table dimensions: 800 x 500 mm Table load: 500 kg Tool changer: 24-position Feed rate in X / Y / Z: 30,000 mm/min Rapid traverse rate in X / Y / Z: 30,000 mm/min Spindle speed max.: 10,000 High-pressure coolant system Chip conveyor 400 V / 30 kVA / 50 Hz Scope of delivery: Available manuals The hydraulic vices, the associated hydraulic unit, the tool holders, and the zero-point clamping system are not included in the scope of delivery! Dimensions & Weights: Installation dimensions L x W x H approx.: 4000 x 3000 x 2650 mm Weight approx.: 5000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ►Upon request, we can offer transport to the destination. ►The quoted price is net plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data without guarantee. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: refurbished (used), Year of construction: 2011, operating hours: 21,600 h, functionality: fully functional, machine/vehicle number: 293-52, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller model: Siemens Sinumerik 840D, total height: 3,000 mm, total length: 3,550 mm, total width: 3,700 mm, overall weight: 10,800 kg, spindle speed (max.): 12,000 rpm, coolant supply: 80 bar, distance between spindles: 320 mm, number of spindles: 2, number of slots in tool magazine: 24, Equipment: chip conveyor, CHIRON DZ 15 KWM HS Twin-Spindle Machining Center, year of manufacture 2011, Siemens 840D – extensively overhauled by the manufacturer in 2024 Description: We are selling a vertical 4-axis twin-spindle machining center, CHIRON DZ 15 KWM HS (series 15, machine no. 293-52), with Siemens Sinumerik 840D, from our own production. The machine was used in series production until recently, is still operational, and can be inspected on site by appointment. Manufacturer overhaul by CHIRON (October/November 2024) In the fall of 2024, the machine was extensively refurbished and modernized by CHIRON’s senior service technicians over several weeks, involving more than 125 hours of work. All work is documented by manufacturer invoices and a work report. The following work was carried out, among other things: Installation of a new spindle unit including spindle flange Installation of a manufacturer-reconditioned drive motor Replacement of the control system NCU (Siemens NCU 572.5B, manufacturer-reconditioned) Retrofitting of the rotary axis measuring system from Heidenhain RCN 226 to RCN 2380 including cable Renewal of signal and power cables, cable glands, seals and coolant nozzles CHIRON Retrofit CPK2.0: Conversion of air sensing to IFM, electrical loading interface with Profibus for automatic loading systems, door safety, and additional function "machining with open protective door" in conjunction with a closed loading handling system The machine is thus prepared for easy integration into an automated production line. Technical data Travel ranges X / Y / Z: 630 / 400 / 360 mm 2 spindles, spindle distance 320 mm, max. 12,000 min⁻¹ Tool holder HSK 63, 24 tool positions Internal coolant supply 80 bar Dsdpfx Aljz Ngcaj Ssku Table width 860 mm Total operating hours: 21,578 h Tool holders are available as an option for an additional charge. Sale ex works 92353 Postbauer-Heng. Assistance with disassembly and loading can be provided by arrangement. Subject to prior sale, specifications without guarantee.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2018. It features an impressive X-axis travel of 670 mm, Y-axis travel of 830 mm, and Z-axis travel of 600 mm. The machine includes a robust table diameter of 800 mm and a high spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U vertical machining centre we have for sale. Contact us for further details. - Swivel Range (B/A Axis): -120 to +120 degrees- Rotary Table (C Axis): 360 degrees continuous- Table Diameter: Kessler table 800 mm- Tool Changer Capacity: 96-fold- Measuring Systems: Heidenhain linear measuring system (X, Y, Z) with sealing air, Heidenhain rotary measuring system- Internal Coolant Supply (IKZ): 20 bar with belt filter unit and coolant temperature control- Hydraulic & Pneumatic Interfaces: 3-way hydraulic connection & 1-way air connection in table center, hydraulic unit controlled via M-function- Spindle/Axis Cooling: Regulated spindle cooler, active air-air control cabinet cooler, controlled oil cooling for 4th and 5th axis- Additional Features:POS Kinematic module with reference spherePOSkontur contour protectionPOS DCM collision moduleexternal hinged-belt chip conveyorchip flushing device Technical Specification Djdoz Nf Uhspfx Al Ssku Taper Size HSK 63 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2011, operating hours: 21,578 h, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis CHIRON DZ15KWM HS was manufactured in 2011. Ideal for precision vertical machining, this model offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the CHIRON DZ15KWM HS machine we have for sale. Contact us for more information. Extra Information • Machine still under power • Table width 860 mm • Spindle spacing 320 mm • Tool positions 24 • Tool holder HSK63 • Hours 21578 • Internal coolant pressure: 80 bar Optional for extra charge • Optional for extra costs: Tool holders available. see pictures • Kuka robot (see nameplate attached for specification) • Platform, robot base, control cabinet including electronics, fence including door and locking mechanism • 3 conveyor belts including sensors, camera including lighting, automatic washing and blow-off station • Gripper including sensors, PC and touchscreen Technical Specification Taper Size HSK 63 Dodoz Ndqmjpfx Al Ssku Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Vertical machining center Manufacturer: DMG Gildemeister Type: DMC 635 v eco Machine No.: 1537000170A Year of manufacture: 2009 Control system: Siemens 810D Shopmill Axes: 3 Travel ranges X: 635 mm Y: 510 mm Dkodpfjz I Rnvsx Al Seu Z: 460 mm Tool changer: 20 positions, SK 40 Spindle speed: 20-8,000 rpm Drive power: 13/9 kW (40/100% ED) - Direct path measuring system for X, Y, and Z axes - Compressed air for measuring systems - Coolant/air switchover - Table size 560x790 mm - Electronic handwheel Errors and prior sale excepted.

Condition: ready for operation (used), Year of construction: 2007, Make: SPINNER Type of machine: MC 650 Year of manufacture: 2007 Control system: Siemens 810 D Machine's weight: 9500 kg Tool holder: SK 40 x-travel: 650 mm y-travel: 450 mm z-travel: 460 mm Speed range: 8000 1/min Overall dimensions: 3,6 × 2,2 × 3,0 m Table dimensions: 710x450 mm Number of tools in the magazine: 32 Pl. Dkjdpfxjz I Nlyj Al Sju

Condition: ready for operation (used), Year of construction: 2000, operating hours: 23,574 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! The following components of the machine have been renewed: Motor and pump of the hydraulic system Hydraulic and pneumatic hoses (partially) Control cabinet LT module replaced Drum of the Knoll system TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 560 mm Travel range Z-axis: 560 mm B-axis: 360 x 0.001 (60 rpm) Spindle speed: 8,000 rpm Table size: 6 pallets, each 500 x 400 mm Table width: 400 mm Table length: 500 mm Table load capacity: 350 kg Working feed rate: 1 - 60,000 mm/min Rapid traverse: 60 m/min MACHINE DETAILS Control model: Siemens Sinumerik 840D Overall length: 7,000 mm Overall width: 5,000 mm Coolant supply: 50 bar Coolant system: approx. 1,100 L Dedpfoz Izavsx Al Sjku Motor power: 13 kW / 20 kW Torque: 124 / 191 Nm Total power consumption: 20 kW Dimensions & Weight Space requirement (L x W): 7 x 5 m Machine weight: approx. 16,000 kg Operating hours Power-on counter: approx. 48,804 h Spindle running time: 23,574 h total EQUIPMENT Documentation/manual Speed infinitely adjustable Chip conveyor Knoll cooling unit with drum filter (30/40/50 bar via M-command) Tool measurement: Renishaw measuring probe Tool breakage monitoring in the machining area Pallet storage space (4 places) Pallet sequence operation Enclosed work area enclosure according to UVV Network capability Technical documents & layout plan

Condition: used, Year of construction: 2012, feed length X-axis: 635 mm, feed length Y-axis: 510 mm, feed length Z-axis: 460 mm, controller model: Sinumerik, table width: 560 mm, table length: 790 mm, spindle speed (max.): 10,000 rpm, spindle mount: MK 4, We offer this used DMG DMC 635 V eco vertical machining center, manufactured in 2012. Serial number: 1537000588A X/Y/Z: 635 × 510 × 460 mm Table: 790 × 560 mm Dkodpfx Ajz Iy A Asl Sou Spindle speed: up to 10,000 rpm SK40 Sinumerik Spindle refurbished in October 2019. First owner If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, Year of construction: 2011, feed length X-axis: 635 mm, feed length Y-axis: 510 mm, feed length Z-axis: 460 mm, controller model: Sinumerik, table width: 560 mm, table length: 790 mm, rotational speed (max.): 10,000 rpm, overall weight: 3,900 kg, spindle speed (max.): 10,000 rpm, We offer this used DMG ECOLINE DMC 635 V eco vertical machining center, manufactured in 2011. Serial number: 1537000413A Year of manufacture: 2011 Maximum spindle speed: 10,000 rpm X/Y/Z: 635 x 510 x 460 mm Table: 790 x 560 mm SK40, Sinumerik Dsdpfjz Iyzrjx Al Soku Spindle refurbished in October 2024 First owner Weight: 3900 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 27,157 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 1,200 kg, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2015. It features a maximum spindle speed of 18,000 rpm and a table size of Ø 800 mm, with a maximum table load of 1,200 kg. The machine includes a 96-fold tool changer and advanced Heidenhain control unit. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U vertical machining centre we have for sale. Contact us for further details. Dkjdpfxoz Ixtmo Al Ssu - Swivel Range: -120 to +120 degrees- Rotary Table: 360 degrees continuous- Spindle: Coolant Through Spindle (CTS / IKZ) 70 bar with belt filter unit- Table Size: Ø 800 mm (Kessler Table)- Tool Changer: 96-fold HSK-A 63- Linear Measuring System: Heidenhain XYZ with purge air- Switch Cabinet Cooler: Active Air-Air- Connected Load: 90 kVA- Full Load Current: 125 A- Max Current Load: 200 A- Voltage: 400 V, 50 Hz- Operating Hours Control On: 27,157 h (as of end 2025)- Operating Hours Program Run: 21,340 h (as of end 2025)- Additional Equipment: - Oil cooling for 4th and 5th axis, controlled - Regulated spindle cooler - Heidenhain Rotary Measuring System - Heidenhain Kinematics Module incl. Reference Sphere - External hinged belt chip conveyor - Coolant pump at head via M-functions - Chip flush device pump - Electromechanical oil/coolant separator - Automatic coolant level monitoring - Tool changer rear operation with display - Tool changer protective door - 3-fold hydraulic connection in table center - 1-fold air connection in table center - Coolant unit temperature control - Workpiece measurement preparation - Infrared workpiece measurement - 3D Touch Probe - Tool measurement via BLUM laser (Laser bridge) - Heidenhain DCM collision module- Automation System: FCS RP 400 Pallet Automation (Commissioned Early Sept 2018)- Pallet Positions: 12- Pallet Size: 400 x 400 mm- Max Transfer Weight: 500 kg Technical Specification Taper Size HSK 63

Condition: good (used), Year of construction: 2019, functionality: fully functional, X.mill M640 Eco machining center with Si 808D Advanced TTL Table dimensions 750 x 360 mm Table load capacity 500 kg T-slots (number x width x spacing) 3 x 18 x 100 mm Distance from spindle nose to table 80 - 580 mm Travel ranges X / Y / Z: 640 / 400 / 500 mm Main spindle spindle speed 10,000 rpm Main spindle spindle overhang 430 mm Main spindle spindle taper BT 40 Rapid traverse X / Y / Z 36,000 / 36,000 / 24,000 mm/min Feed rate Working feed rate X / Y / Z 10 - 12,000 mm/min each Number of tool positions 12 Tool diameter 55 (101) mm Tool length (max.) 200 mm Tool weight (max.) 8 kg Tool change time chip to chip 9 s Dkjdez Iw Najpfx Al Seu Tool change time tool to tool 7 s Positioning accuracy ± 0.01 mm Repeatability accuracy ± 0.005 mm Main drive 11 kW Main drive, constant load 7.5 kW Dimensions (L x W x H) approx. 2.3 x 1.8 x 2.3 m Weight 4,200 kg The machine can be inspected under power by arrangement.

Condition: used, Year of construction: 2004, functionality: fully functional, spindle speed (max.): 12,000 rpm, operating hours of spindle: 21,600 h, For sale is a good, used DMC 64 V linear Working area & travel distances • X-axis: 640 mm • Y-axis: 600 mm • Z-axis: 500 mm Work table • Clamping area: 850 x 600 mm (sometimes also specified as 850 x 630 mm) • Max. table load: 600 kg Milling spindle & drive • Spindle speed: 1 to 12,000 rpm • Spindle power (S1/S6): 13 / 19 kW • Torque: 70 / 100 Nm • Tool holder: SK 40 or BT 40 Feed & dynamics • Rapid traverse rates (X / Y / Z): 60 / 40 / 40 m/min • Feed rate: 0 – 40,000 mm/min Dkodpfxez Imtuj Al Sou • X-axis: Driven by a wear-free linear motor Tool magazine (ATC) • Number of magazine positions: 30 positions • Max. tool diameter: 80 mm (up to 140 mm with free adjacent positions) • Max. tool length: 300 mm • Max. tool weight: 7 kg Controls • SIEMENS: Sinumerik 810D / 840D (ShopMill) Machine dimensions & weight • Machine weight: approx. 6,500 kg • Installation dimensions (L x W x H): approx. 3.40 x 2.50 x 3.30 m

Condition: excellent (used), Year of construction: 2019, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: Siemens, controller model: Sinumerik, workpiece length (max.): 900 mm, workpiece width (max.): 560 mm, workpiece weight (max.): 600 kg, table load: 600 kg, overall weight: 5,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,200 h, coolant supply: 12 bar, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Bertikales BAZ DMG MORI CMX 600 Year of manufacture: 2019 Control system: DMG MORI SLIMline® Multi-Touch control Operating hours: 19,200 h Spindle hours: 9,200 h Coolant pressure: 12 bar Technical data: Spindle speed: 10 - 12,000 rpm Drive power: 9/13 kW Torque: 54/80 Nm Tool holder: SK 40 Number of magazine positions: 30 Travel ranges: X-axis: 600 mm Dodpfsz Ihumox Al Seku Y-axis: 560 mm Z-axis: 510 mm Direct path measuring system in all axes Production package 1

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,738 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, controller model: i series, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DOOSAN VC 630/5AX was manufactured in 2017. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a robust table size of Ø 630 mm and can accommodate workpieces up to Ø 730 x 500 mm with a maximum weight of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5AX vertical machining centre we have for sale. Contact us for further details. Dedpfx Aloz Hwgps Sjku • A axis travel: +30° ~ -120° • C axis travel: 360° • Rapid feedrate (X/Y/Z): 40 / 40 / 36 m/min (1574.8 / 1574.8 / 1417.3 ipm) • Rapid feedrate (A/C): 20 / 30 r/min • Table size: Ø 630 mm (Ø 24.8 in) • Max. workpiece size: Ø 730 x 500 mm (Ø 28.7 x 19.7 in) • Max. workpiece weight: 500 kg (130.1 lb) • Total operating hours (ACCESO): 5679 H 6 M • Total working time (TMP LAV): 2748 H 23 M 44 S • Total cutting time (TEMPO TAGLIO): 2400 H 32 M 35 S • Total parts count (PEZZI TOTALI): 103 Additional equipment • Chip conveyor

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 460 mm, controller manufacturer: FANUC, controller model: 16i-MB, total height: 3,153 mm, total width: 1,600 mm, overall weight: 7,700 kg, spindle speed (max.): 1,200 rpm, number of slots in tool magazine: 20, product length (max.): 3,200 mm, number of axes: 3, This 3-axis Enshu ES450 was manufactured in 2001. It features an X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 460 mm. The machine is equipped with a Fanuc 16i-MB control unit and has a tool magazine capacity of 20 tools. If you are looking to get high-quality milling capabilities, consider the Enshu ES450 vertical machining centre we have for sale. Contact us for further details. Djdpez Hm Iisfx Al Soku • Coolant pressure: 6 bar / 60 bar • Hydraulic pressure: 100 bar • Electricity consumption: 22 kWh • Compressed air consumption: 43.68 m³/h • Documentation: Electrical manual: No; Mechanical manual: Yes • Units available: 4 • Unit 1: Year 2001; Operating hours 49,900 h; References 169 / MF-960004 • Unit 2: Year 2001; Operating hours 56,000 h; References 170 / MF-960005 • Unit 3: Year to be confirmed; Operating hours to be confirmed; References 176 / MF-960006 • Unit 4: Year 2001; Operating hours 48,100 h; References 175 / MF-960007 Additional equipment • Chip conveyor: Included • Conveyor dimensions (L × W × H): 5,500 × 1,600 × 1,600 mm • Conveyor weight: approx. 2,500 kg Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2014, CNC MACHINING CENTER ROMI D 600 Year of manufacture: 2014 CONTROL: FANUC oi-MD Technical data: Drive power: 15 kW Travel ranges: X 600 mm, Y 530 mm, Z 580 mm Table surface: 840 × 500 mm Dedpjz Hl Dcofx Al Ssku Permissible table weight: 800 kg Spindle speed: 8000 RPM 20-tool changer, 80 tool holders BT 40

Condition: excellent (used), Year of construction: 2020, Brother C-00 control system Dkedpfx Aez Hfprsl Sju Travel ranges X/Y/Z: 650 x 400 x 435 mm Dual pallet changer, 800 x 400 mm Spindle speed: 16,000 rpm Tool magazine for 40 tools, BT 30 Coolant pressure: 70 bar 3D measuring probe, OMP 40 Electronic handwheel Chip conveyor

Condition: excellent (used), Year of construction: 2015, operating hours: 8,751 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, table width: 560 mm, table length: 790 mm, overall weight: 3,900 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 2,500 h, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, CNC Milling Machine DMG MORI ecoMill 635 V TECHNICAL DATA: - Year of manufacture 2015 - Spindle hours approx. 2 500 hours - Program run time approx. 8 751 hours - X 635 mm - Y 510 mm - Z 460 mm - Control SIEMENS SINUMERIK 840D sl SLIMline (with ShopMill) - Spindle speed max. 12 000 rpm - Table size 790 × 560 mm - Tool magazine 20 positions (SK40) - Power 17 kW - Cast iron construction - Machine dimensions 3.4 x 2.45 x 2.6 m - Weight approx. 3 900 kg EQUIPMENT: - Through-spindle coolant - Flushing system - Air-conditioned electrical cabinet - Handwheel - USB - Technical documentation - Chip conveyor Machine in very good technical condition, connected to power – it can be inspected and tested on site by prior appointment. Professional loading is included in the price. Djdoz Hculepfx Al Sjku Accessories, tooling and clamping devices shown in the photos are part of the offer only if listed under equipment. Technical data is for reference only and may contain inaccuracies. Subject to prior sale.

Condition: excellent (used), Year of construction: 2024, Traverses X Y Z: 660mm x 406mm x 508mm, table size 762mm x 356mm, 10000rpm spindle, 20 station ATC, Dedpfx Alsz Hayre Ssku DIN40 spindle taper, Hurco WINMAX 5 control, coolant, Swarf Auger

Condition: excellent (used), Deckel Maho DMC 635V in top condition – few spindle hours (Heidenhain iTNC 530) For sale is a highly precise and excellently maintained Deckel Maho DMC 635V. The machine has very few spindle hours and is in excellent technical and visual condition. Technical data Control: Heidenhain iTNC 530 Travel (X/Y/Z): 635 / 510 / 460 mm Table clamping area: 790 x 560 mm Spindle speed: 20 – 8,000 rpm Feed rate: 0.01 – 10,000 mm/min Rapid traverse: 30 m/min Dedpfx Aloz E A Hrj Ssku Tool holder: SK40 (DIN 69871) Tool magazine: 20 positions Machine weight: approx. 3,600 kg Equipment & accessories Electronic handwheel Coolant/air blast switchover (M25) Coolant nozzle Machine condition The machine has been technically refurbished by us and is ready for immediate use: The geometry has been completely measured and is verifiably within the manufacturer's tolerance for new machines (geometry protocol included). All hoses have been preventively replaced. The machine has been thoroughly cleaned. An inspection and a detailed test under power are of course possible at our location. Everything from a single source: Baumgärtner CNC GmbH & Co. KG We are a specialist company that focuses on the service, maintenance, overhaul and automation of DMG machines as well as other well-known manufacturers. That is why we will not leave you alone even after the purchase. We will support you! We would also like to offer you the following: Transport and professional installation Installation and commissioning at your location Subsequent maintenance and repair work From machine purchase to ongoing production – you can rely on us. Please contact us for further information or to arrange an inspection appointment.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 640 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 16,400 W, number of axes: 3, This 3-axis KNUTH X.mill 640 CNC was manufactured in 2009. It features a total power of 16.4 kW and operates at 400 Volt with a frequency of 50 Hz across 3 phases. The machine is equipped with a new frequency inverter and a new braking resistor. If you are looking to get high-quality machining capabilities, consider the KNUTH X.mill 640 CNC vertical machining centre we have for sale. Contact us for further details. Dsdpfx Alez Ep N Hs Sjku - Voltage: 400 Volt- Frequency: 50 Hz / 3 Phases- Frequency Inverter: New- Braking Resistor: New- Manufacturer Error Description: Main spindle motor feels loose or offers resistance when turned manually (possible issue with belt, pulley, or top spindle mechanism). Main spindle motor encoder may require repair (sends positive signals only, negative signals required for proper positioning).