SUMA GmbH

Condition: excellent (used), Here, we offer an ETSYSTEM electronic load with GPIB interface. 32615A AC & DC Electronic Load GPIB/RS232, 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, offering an ideal test solution for UPS, AVR, and DC/AC inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series features its own control and display panel and a 5-status recall/memory storage, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measurement device test function provides a quick diagnosis of test results for production and QC test throughput. Features: Voltage, current, power, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory storage. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit display for voltage, current, power, and VA. Suitable for sine, square, and step waves. Iedpfjzd Uh Iex Ag Ueau Width 600 mm, Height 1506 mm, Depth 600 mm 196 kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Keyence Here we offer a 3D profilometer. Technical specifications: Observation and measurement range: Horizontal: mm 24.0 12.0 8.0 6.0 7.6 3.8 2.5 1.9 Vertical: mm 18.0 9.0 6.0 4.5 5.7 2.9 1.9 1.4 Measurement resolution 0.1 μm: Height measurement: Iajdjzd Uhzjpfx Ag Uou Height measurement range, without image composition in Z: 10 mm 1 mm With image composition in Z: 50 mm 30 mm Repeatability (σ)*1, without image composition in Z: 0.4 µm With image composition in Z: 1.0 µm Width measurement: Measurement accuracy*1, without image composition in Z: ±2.5 μm With image composition in Z: ±4.0 μm Repeatability (σ) *1 1 μm 0.5 μm Measurement accuracy*1 ±5 μm ±2 μm XY travel: 184x88 mm Z travel: 73 mm Includes control unit VR-5000 + software with licenses Type: VR-5200 + VR-5000 For sale from our location! Condition: fully functional + no signs of wear For further technical information, please refer to the manufacturer. Scope of supply: (As shown in the picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge Iodpfezdz S Tjx Ag Uoau - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: good (used), Here, we offer a Panasonic industrial image processing system, the Imagechecker P400, complete with vision software. It consists of the following components: 2x Imagechecker P400 1x Vision P400 software 9x ANPC 837 D double-speed megapixel camera and additional accessories (see images!). New, in the sense of unused! Type: Panasonic Imagechecker P400 Condition: new Isdpfx Aszdrzlsg Ujau Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: excellent (used), Here we offer you an FRT MicroSpy Mobile. Device designation: FRT MicroSpy Mobile, Art. No. MSP 105 00 Device number: MSP1033 FRT MicroSpy Mobile Portable optical profilometer for non-destructive 3D surface measurements directly on the component. Due to its portability, the MicroSpy Mobile is ideally suited for mobile use on large machines, vehicles, rollers, glass panes, or other large components. This enables high-resolution and non-destructive measurements to be performed "on-site" to determine important characteristics of surfaces, such as roughness, contour, topography, layer thickness, wear, load-bearing capacity, or volume. Smaller samples can be measured directly on the measuring table. Usable on large construction and machine parts. Excellent resolution values. Excellent reproducibility. Non-destructive measurement. Handles and adjustable support feet. Low weight (approx. 5 kg). FRT Technical Specifications: Device: MicroSpy Mobile xy-travel 50 x 50 mm² xy-table Type: compact XY cross table with open frame Bearing: mechanical cross-roller guide Drive: DC motor with ball screw Travel (XY measuring range): 50 x 50 mm² (or 20 x 20 mm² with CWL 3 mm) Position measuring system: rotary encoder Measuring system resolution: 0.25 µm XY repeatability: < ± 1 µm Table height variation (per axis): < 2 µm / 50 mm (of which not reproducible): < 0.5 µm Right angle XY: < 4 µm / 50 mm z-axis, motorized: Type Position Iaedpfx Agezdnqcj Ueu Drive Travel Position measuring system Measuring system resolution Axis wobble Coarse adjustment, manual: Type: dovetail guide with fine drive Adjustment range: 25 mm Measurement: Minimum point distance xy: 1 µm Sample size: - Sample weight: - Min. measurement speed: 1 µm / sec Max. measurement speed: 50 mm / sec Overall system: Total weight: approx. 150 kg of which measuring system: approx. 5 kg Footprint measuring system: approx. 0.3 x 0.3 m² Dimensions control unit (W x D x H): approx. 0.65 x 0.65 x 1.0 (1.6) m³ Power supply EU version: 110 - 240V, 50 - 60Hz, 16A Power supply US version: 110 - 240V, 50 - 60Hz, 16A Power consumption: typically 300-400 W Compressed air supply: - Ambient temperature: 22°C ± 5°C Temperature stability: < 0.5°C/h Environmental conditions: measuring room Scope of delivery: 1 x XY table with 50 x 50 mm² travel 1 x Mobile base with electronics 1 x Chromatic sensor FRT CWL 600 µm 1 x Electronics for chromatic sensor 2 x Keys for computer 2 x Keys for rear door 1 x Power cable for cold devices 1 x Mouse (PS/2) 1 x Keyboard 1 x Monitor 19'' TFT Type: FRT MicroSpy Mobile Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), X-axis: 300mm, y-axis: 200mm, z-axis: 200mm, working distance: 77mm, max. workpiece height: 200mm, max. workpiece weight: 20kg, length: 730mm, width: 900mm, height: 950mm, weight: 125kg, optical length measurement error (2D): 2.9 + L/100µm (L in mm) at 20°C ±1K, tactile length measurement error (MM2/TP20): 4 + L/75µm (L in mm), optical lens: 1.5x, screen magnification: 47-80x, field of view: 4.5x3.5mm, camera: 1.3 megapixel CMOS with autofocus. Equipment: 3-axis CNC control via servo drives and joystick, IK 5000 measuring software, IK 5000 measuring computer for 2D and 3D geometric measurements, integrated CAD module for DXF and IGES data, automatic fit routine for comparison of freeform contours, scaling routine, tolerance inspection according to DIN ISO 1101, data export to Microsoft Office or to databases/SPC/QS systems via ODBC interface, report generator for user-defined measuring tasks, storage of executed actions as measuring macros. An on-site inspection is possible. Ijdezc Rdwspfx Ag Ujau

Condition: good (used), Year of construction: 2015, functionality: fully functional, The ZOLLER pomBasic was rarely used until mid-2022, but it was still maintained annually by ZOLLER. ZOLLER »pomBasic« is an inspection solution for measuring and testing drills, milling cutters, and countersinks directly at the point of use, using incident light. It is compact and versatile. Ijdpfx Agszc Hu Sj Ueau The device is space-saving and suitable for workshop use, making it ideal for placement directly next to the grinding machine. Clear software interface: place the tool, start the process, inspect, and you're done! The PDF contains a complete list of the measuring machine's features.

Condition: excellent (used), FARO Prime 3D coordinate measuring arm Manufacturer: FARO Technologies Type: Prime Device type: Portable 3D coordinate measuring arm / Portable CMM Date of manufacture: 09/10/2013 Calibration date according to certification: 06/25/2015 Made in Switzerland Mobile 3D measuring arm for industrial metrology, quality assurance, component inspection, reverse engineering, tool and mold making, jig and fixture construction, and production control. Technical data Measuring range: approx. 1.8 m / 6 ft Axes: 6 Single Point Accuracy: 0.019 mm Volumetric accuracy: ±0.027 mm Repeatability: up to 0.016 mm Revision: 28.1 Bluetooth wireless technology USB interface Integrated battery operation Temperature compensation Portable CMM measuring arm technology Compatible with multiple probe systems Weight measuring arm: approx. 9.3 kg Total weight incl. case and accessories: approx. 35 - 50 kg Equipment / Scope of delivery FARO Prime measuring arm Transport case HP EliteBook laptop Reference sphere / Calibration sphere Base plate / Mounting plate Measuring probes / Probe set Software data carrier USB dongle Iajdpfx Aszc Erpeg Ueu Operating instructions / Manuals Other accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), EM TEST esd NX30 ESD Simulator 30 kV Manufacturer: EM TEST / AMETEK Type: esd NX30 Device Type: ESD Simulator / EMC Test Equipment Professional ESD testing system for performing ESD immunity tests according to IEC 61000-4-2 and ISO 10605. The device generates air and contact discharges up to 30 kV and is suitable for EMC laboratories, development, quality assurance, and certification applications. Technical Data Air discharge: 200 V to 30 kV ±5% Contact discharge: 200 V to 30 kV ±5% Polarity: positive / negative / alternating Operating modes: single and continuous operation Frequency: 0.5 to 20 Hz, air discharge up to 25 Hz Color touch display Integrated event and activity logger Power supply: battery and mains operation Battery capacity for up to 30,000 discharges at 30 kV Remote interface via fiber optic USB Interlock function Remote trigger EUT fail detection Scope of supply EM TEST esd NX30 base unit ESD gun with color display Power supply Transport case 2 discharge networks as shown in the pictures Adapters and accessories as shown in the pictures Dimensions Base unit: approx. 170 x 360 x 140 mm ESD gun: approx. 85 x 270 x 260 mm Weight base unit: approx. 6.5 kg Isdpfx Agezc Ehwj Uoau Condition Used device. Optical condition as shown in the pictures. Signs of wear and tear due to age and use. Scope of supply 1x EM TEST esd NX30 base unit 1x ESD gun 1x Power supply 1x Transport case 2x Discharge networks Adapters and accessories as shown in the pictures Shipping or freight shipping possible. Subject to change, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 350, input voltage: 220 V, measuring range X-axis: 2,500 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 2,500 mm, Demonstration unit, used solely for training purposes. Iasdpfozcw Rkex Ag Usu ROMER Absolute 7525 SI measuring arm including laser scanner. Includes laptop with Windows 11 and PC-DIMS 2024.1 software. Freedom of movement: This fully integrated, certified laser scanner system can be used in a variety of measuring applications. 3D digitization, 3D modeling, point cloud inspection, reverse engineering, rapid prototyping, or copy milling are the most common applications for laser scanners. The laser scanner can be used for a wide range of materials – without compromising on accuracy. The integrated laser scanner from ROMER does not require a warm-up time. Additional cables and controllers are also no longer required. Rapid switching between scanning and probing is possible at any time.

Condition: new, HEIDENHAIN Length measuring system Type: LS107-2640 Iajdpfx Agezcv Tks Usu Measuring length: 2640 mm Serial No.: 3608531 ID No.: 24388972 Condition: as new, in original packaging.

Condition: used, Year of construction: 1995, We offer this used FARO S06/REV-1 measuring system, manufactured in 1995. Serial number: S06029500183 Model: S06/REV-1 Country of manufacture: United States Iasdpfx Aozcpc Eeg Uou If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2005, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, We offer this used Tesa XCEL-7/10/7 measuring system, manufactured in 2005. Manufacturer: Tesa Model: XCEL-7/10/7 Year of manufacture: 2005 Iodpezcn Uyofx Ag Ujau Condition: Used Category ID: 404 Type ID: 2224 Type: Measuring system If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: RA 7512-3052-FA, total width: 550 mm, total length: 850 mm, total height: 350 mm, overall weight: 25 kg, Highest accuracy in the Hexagon measuring arm series! TECHNICAL DETAILS Measuring range: 1.2 m Inspection bar length: 305 mm Inspection sphere diameter: 25 mm MACHINE DETAILS Dimensions & Weight External dimensions of transport box: 850 x 550 x 350 mm Iajdpfxszclvno Ag Usu Total weight incl. transport box: 25 kg EQUIPMENT Mobility Pack FP2-2659-FA (wireless connection to the computer possible) Notebook ASUS / Win 10 / SSD Software PcDmis 2016 / RDS software Transport case 3 magnets Probe box with 3 probes 6 mm ruby ball 3 mm ruby ball 15 mm calibration sphere Dust protection cover Complete cable set USB stick with RDS software

Condition: new, New HEIDENHAIN length measuring system. The original packaging was opened solely for the purpose of taking photographs. Manufacturer: HEIDENHAIN Type: LS 486C Device type: Incremental, encapsulated length measuring system Iajdpfxezcgz Ee Ag Uou Measuring length: 1020 mm Measuring method: Incremental Output signal: 1 Vpp Pitch period: 40 µm Scanning principle: Single-field scanning Protection class: IP53 Mounting type: Clamping mounting

Condition: new, HEIDENHAIN Incremental encapsulated length measuring system LS 187 – ID 526971-09 New HEIDENHAIN length measuring system, unused. The original packaging was opened solely for the purpose of taking photographs. Manufacturer: HEIDENHAIN Type: LS 187 ID Number: 526971-09 Device type: Incremental encapsulated length measuring system Measuring length: 940 mm Accuracy class: ±5.0 µm Pitch period: 20 µm Output signal: 1 Vpp Reference mark: In the center of the measuring length Mounting type: Integrated mounting strip Iajdpfx Agjzcgy Uj Usu Supply voltage: 5 V ±5 % Electrical connection: Flange housing, 14-pin, separate adapter cable

Condition: new, New HEIDENHAIN length measuring system. The original packaging was opened solely for the purpose of taking photographs. Iaodpszcgybsfx Ag Ueu Manufacturer: HEIDENHAIN Type: LC 183 Device type: Absolute encapsulated length measuring system Measuring length: 540 mm Accuracy class: 5.0 µm Measuring method: Absolute Data interface: EnDat 02 Measuring step: 10 nm Pitch: 20 µm Electrical connection: Flange box, 14-pole Mounting type: Integrated mounting strip Available quantity: 4 pieces

Condition: new, HEIDENHAIN length measuring system LC 183 – measuring length 540 mm New HEIDENHAIN length measuring system. The original packaging was only opened for taking photographs. Manufacturer: HEIDENHAIN Type: LC 183 Device type: Absolute length measuring system Measuring length: 540 mm Scanning principle: Single-field scanning Measuring method: Absolute Output signal: EnDat Isdpfx Agjzcgxwj Ujau Mounting type: Clamping Protection class: IP53 Available quantity: 3 pieces

Condition: new, HEIDENHAIN length measuring system LC 182 – measuring length 940 mm New HEIDENHAIN length measuring system. The original packaging was only opened for the purpose of taking photographs. Ijdozcgwmopfx Ag Uoau Manufacturer: HEIDENHAIN Type: LC 182 Device type: Absolute length measuring system Measuring length: 940 mm Measuring step: 0.001 µm Accuracy class: ±3 µm Mounting type: Clamping Scanning principle: Single-field scanning Protection class: IP53 Supply voltage: 5 V DC ±5 % Output signal: 1 Vss

Condition: new, Manufacturer: HEIDENHAIN Type: ROD 780 ID Number: 383600-02 Measuring method: Incremental Design: Angle encoder with self-bearing Shaft design: Solid shaft Shaft diameter: 14 mm For separate shaft coupling Line count: 18,000 Output signal: 1 Vss / 1 Vpp sinusoidal Iasdpfx Agjzcgufo Uou System accuracy: ±2 arc seconds Electrical connection: M23 connector, 12-pin Cable length: 1.0 m Axial tolerance: up to ±1 mm

Condition: excellent (used), IM-6600 measuring system IM-6120 measuring head CMOS sensor: 6.6 MP monochrome 10.4" display LCD color monitor Field of view: φ100 x 200 mm Smallest display unit: 0.1 μm Telecentric transmitted light illumination (4-segment ring) Measuring accuracy: Wide-field measuring mode: ±5 μm High-precision measuring mode: ±2 μm Measuring mode with large field of view: ±7 +0.02L μm Measuring mode with fixed position: ±4 +0.02L μm Table: X-axis: 100 mm Z-axis: 30 mm Iodjzcd A Topfx Ag Uoau Load capacity: 1 kg

Condition: not inspected (used), Mitutoyo Quick Scope QS250Z1J Measuring range (X×Y×Z): 200×250×100mm Resolution / length standard: 0.5μm / linear encoder Image transmission unit: 1/3" color CCD camera Measuring accuracy: XY: (2.5 + 6L/1000) μm Z: (5 + 6L/1000) μm Moving speed (max): 80mm/s Acceleration/deceleration (max): 250mm/s² Ijdpfezb U Anox Ag Usau Glass size: 269 × 311 mm Maximum load capacity: 10kg Illumination: Contour illumination: 12V/30W halogen Reflective illumination: 12V/50W halogen Fiber optic ring illumination: 12V/100W halogen Main dimensions (W×D×H): 465 × 815 × 663mm Weight: 76 kg (169 lbs) Maximum power consumption: 970W Optical system 0.5X–3.5X (20X–137X monitor magnification), 8 steps, 7X zoom. Required operating software Mitutoyo Quick Scope QS250Z1J is the default operating and measuring software for QSPAK

Condition: excellent (used), Year of construction: 2014, 3D measuring macroscope Controller VR 3000K Iedozb R Iyspfx Ag Uoau Measuring head VR 3100 Measuring range 24 x 18 x 10 mm Measuring diagonal 30 mm Magnification 12x – 160x Resolution 0.1 µm Automatic edge detection

Condition: excellent (used), Year of construction: 2010, 1" image sensor, 6.6 megapixels, CMOS Double telecentric lens Z-axis travel distance 30 mm Iaodpfxozb R Ims Ag Uou Z-stage maximum load 3 kg

Condition: good (used), quantity 1 STK. Hahn & Kolb SUBITO SU Internal Precision Gauge SU100-160mm 7 inserts 4 discs Without dial gauge In a wooden case. For the precise measurement of bores using the 2-point measuring method. By rotating and/or moving the gauge within the bore, geometric deviations can be detected. The movable measuring pin is fitted with carbide, as is the fixed measuring pin. Self-centring in the bore Iedpfszb Rapox Ag Ueau kzeuge GmbH.