KAMI GmbH

Condition: ready for operation (used), 3-jaw chuck (diameter 250mm) tool holder device tail stock 3x steady rest Technische Daten / technical details: Spitzenweite / center to center 2000 mm Umlaufdurchmesser über Bett / rotary diameter over bed 510 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 310 mm Spindelbohrung / spindle hole 52 mm Drehzahlbereich / spindle speed 44-2240 UpM /rpm Gewicht der Maschine ca. / weight ca. 2500 kg Hedpfx Aez Huttjl Aju Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, overall weight: 11,000 kg, turning diameter max. 480 mm turning length max. 1.000 mm control Fanuc 15 TFB swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 3000 rpm gear ratio 2 power capacity - main spindel 53 kW spindle nose 11 DIN 55026 chuck diameter 315 mm spindle bore 103 mm rapid traverse 10 m/min feed power 15 kN number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm total power requirement ca. 50 kW weight of the machine ca. 11 t dimensions of the machine ca. 6 x 3,5 x 3,0 m The machine was in working order when taken out of service and put into storage; loading is possible. Hsdpfxjz Hmwks Al Aeu Must move in short time

Condition: used, Brand: AMUTIO CAZENEUVE Model: HB 575 Distance between points: 2.000 mm Swing over bed: 575 mm Swing over slide: 300 mm Longitudinal bed width: 410 mm Machine speed ranges: 20-1.600 rpm Spindle numbers: 16 Head bore diameter: 52 mm Hedpfxjz E R Iws Al Asu Quill of tailstock diameter: 52 mm Quill of tailstock travel: 70 mm Machine equipped with: 4 Station turret 250 mm 3-jaw chuck Set of hard jaws Steady rest Coolant tank and motor pump

Condition: used, total length: 3,700 mm, total width: 1,100 mm, total height: 1,500 mm, Colour: Green Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 300 - Distance between centres [mm]: 2000 Hsdpfxez Et Uao Al Asu - Bed width [mm]: 385 - Spindle bore [mm]: 73 - Min. spindle speed [rpm]: 26 - Max. spindle speed [rpm]: 1100 - Options: Fixed steady, Removable bed, Three-jaw chuck, Travelling steady - Swing over removable bed [mm]: 750 - Transport dimensions: 3700mm x 1100mm x 1500mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 mm Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 1/min Hjdpfoz Er Tzjx Al Aou diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 68 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 1981, total length: 3,300 mm, total width: 1,100 mm, total height: 1,250 mm, Colour: Grey Empty weight: 2.500 kg Hedpfx Aloz Enywo Asu - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 14946 - Drive system: Conventional - Power [kW]: 7.5 - Centre height [mm]: 275 - Swing over bed [mm]: 550 - Carriage turning diameter [mm]: 312 - Distance between centres [mm]: 1600 - Bed width [mm]: 385 - Spindle bore [mm]: 52 - Min. spindle speed [rpm]: 32 - Max. spindle speed [rpm]: 1600 - Transport dimensions: 3300mm x 1100mm x 1250mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Parallel Lathe CAZENEUVE HB 500 Between points: 1000 mm Maxi Ø on bench: Ø 500 mm Maxi Ø over saddle: Ø 190 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 1600 RPM Turret: MULTIFIX type B 3-jaws chuck Ø 215 mm Threadings: Metric + Whitworth Tailstock: CM5 Hsdez D Hrvjpfx Al Aju Scale: 2 axes NEWALL Recent electrical panel Supplied with 1 tool holder + 1 set of jaws Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1400 x 1600 mm Weight: approx 2 T

Condition: used, Used parallel lathe, 250x1000, SIBIMEX CU500, with display,56MM BAR CLEARANCE Hjdpfx Ajz Az Rqjl Aeu

Condition: used, functionality: fully functional, spindle bore: 60 mm, total length: 2,600 mm, type of input current: three-phase, spindle mount: MK 5, Equipment: rotational speed infinitely variable, Well-maintained and stable Cazeneuve HBX590 center lathe 1000 mm between centers Turning diameter above the bed: 580 mm Spindle bore: 60 mm Tool holder: MK5 Motor: 11 kW Speed control via Facom frequency inverter with speed control on the dashboard. Includes the following accessories: Fixed steady rest Protective guards (prevents coolant from dripping onto the floor) Machine lamp Coolant system Axial stop for the main spindle Acurite digital readout Hodpez Ar A Tjfx Al Aou Hydraulic system cleaned and fluid replaced in 2025. Comes with the original tool holder. A multifix C can be included for an additional charge. Make a good offer and this versatile lathe can be yours! If you have any questions or would like more information, please send us a message or call us.

Condition: used, total length: 2,650 mm, total width: 1,150 mm, total height: 1,650 mm, Colour: Green Empty weight: 2.500 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 225 - Swing over bed [mm]: 550 - Carriage turning diameter [mm]: 1600 - Distance between centres [mm]: 1050 - Bed width [mm]: 340 - Spindle bore [mm]: 52 - Min. spindle speed [rpm]: 46 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Four-jaw chuck, Three-jaw chuck, Quick-change tool post, Fixed steady, Removable bed - Type of digital readout: Heidenhain - Transport dimensions: 2650mm x 1150mm x 1650mm (l x w x h) Hedpezzlg Asfx Al Aju - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), turning diameter over bed 520 mm turning diameter over slide rest 320 mm turning length 1000 mm turning speeds 21 - 1500 U/min Hjdpozyy E Djfx Al Aeu spindle bore 52 mm transmission ratio 18 total power requirement 5,5 kW weight of the machine ca. 1500 kg dimensions of the machine ca. 2200 x 1100 x 1400 mm

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 630 mm, turning length: 1,250 mm, total length: 3,420 mm, total width: 1,750 mm, total height: 1,400 mm, type of input current: three-phase, overall weight: 5,200 kg, workpiece weight (max.): 6,000 kg, spindle mount: MK 6, Hello, We are offering a robust, well-maintained SUS 63/1250 lathe. All components are original, and it is in 100% working condition. The lathe was used sporadically in our workshop. It is in continuous operation, connected, and can be inspected. Manufacturer: TOS Turning length: 1250 mm Turning diameter (max.): 655 mm Turning diameter on the cross slide (max.): 390 mm Taper: Morse 6 Weight: 5.2 t Main motor: 22 kW (option to install a lower-power motor) Length/width/height: 3420/1750/1400 mm Load capacity: 6 t Spindle bore: 82 mm Rapid feeds Included: - 400 mm self-centering chuck - additional set of jaws - rotary steady rest - set of wrenches - chip/coolant tray - coolant pump - lamp Hsdpezxn R Esfx Al Aeu - Technical documentation in Polish + mechanical and electrical diagrams We recently replaced the hydraulic oil with new oil.

Condition: ready for operation (used), functionality: fully functional, L & Z Spindle Lathe / EXCELLO DLZ 500 SL x 3 Meter Turning Length - MACHINE IN WELL-MAINTAINED ORIGINAL CONDITION - Center height 250mm - Distance between centers 3000 mm - Turning diameter over bed 500mm - Turning diameter over cross slide 310mm - Bar capacity 65 mm - Spindle speeds 28 - 1400 rpm (geared) - Automatic longitudinal / facing feeds - Thread cutting / Metric / Inch etc. - 3-jaw chuck 250mm - 4-jaw chuck 250mm - Multifix base with inserts - Steady rest - Work light - Tool cabinet - Documentation Dimensions: L x W x H 5.5 x 1.4 x 1.6 meters / Weight 3800 kg Hsdpfjzwwf Ajx Al Asu Errors and omissions excepted.

Condition: used, Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Hjdpozwgpqefx Al Asu Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Hodjzwgntopfx Al Aou Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: used, Parallel Lathe CAZENEUVE type HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Hsdpfxezwfdmo Al Aju Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Rotation: from 20 to 1600 RPM Turret TRIPAN 411 3-jaws chuck Ø 200 mm Spindle motor: 15 CV ThreadingsMetric + Whitworth Tailstock CM5 Lubricant tank Lubricant pump Supplied with 3 TRIPAN tool holders Voltage: 380 V Length: 3500 mm Width with tank: 1500 mm Total height: 1400 mm Weight: approx 3 T

Condition: new, Year of construction: 2026, Center distance 1500 mm Center height 210 mm Swing over bed 500 mm Swing over cavity 710 mm Swing over bed slide 300 mm Bed width 405 mm Spindle bore 82 mm (D8) Spindle taper 90-(1:20) Speed ​​range 9 – 1600 rpm Maximum tool size 25 × 25 mm Longitudinal feed range 0.028 – 6.43 mm Cross feed range 0.012 – 2.73 mm Metric thread 0.5 – 224 mm / 48 ranges Inch thread 56 – 1/4 TPI / 45 ranges Modular thread 0.5 – 112 mm / 42 steps Hjdezr I H Hjpfx Al Aeu DP 56 thread – 1/4 DP / 45 steps Center diameter 75 mm Center travel 150 mm Tailstock taper MK5 Motor power (S1/S6) 7.5 / 9 kW (10 HP) Pump power (S1/S6) 0.1 / 0.12 kW Machine dimensions (L × W × H) 2700 × 1150 × 1800 mm Weight 2850 kg A larger model is available, 660 x 2000 mm, priced at €14,800 net.

Condition: new, Maximum turning diameter: 1,100 / 1,800 mm Hedpszrluujfx Al Aju Turning diameter over bed: 538 mm Turning diameter over slide: 300 mm Spindle mounting: DIN 55026 Spindle bore: 82 mm Spindle speeds: max. 3,000 rpm Drive power: 12/30 kW Machine weight: 2,700 / 3,000 kg

Condition: ready for operation (used), Manufacturer: Stanko Year of manufacture: 1967 Machine number: 9543 Type / Model: 1K62 Distance between centers: 1,000 mm Bore: 50 mm Center height: 240 mm Hjdpjzq D Rxsfx Al Aou Swinging diameter over bed: Over carriage: 480 mm 220 mm Spindle speed range: 12.5 to 2,000 rpm Feed rate, longitudinal: Facing: Power connection: Accessories / Equipment: 4-way steel tool holder, 250 mm 3-jaw chuck, faceplate Condition: good Weight: approx. 2.5 t Dimensions: 2,700 x 1,200 x 1,400 mm

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 270 mm, spindle bore: 77 mm, turning diameter: 505 mm, turning diameter over bed slide: 505 mm, center height: 250 mm, center width: 1,500 mm, turning length: 1,500 mm, quill stroke: 180 mm, quill diameter: 80 mm, quill travel distance: 180 mm, total length: 3,095 mm, total width: 1,100 mm, total height: 1,525 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 13 rpm, swing diameter over cross slide: 270 mm, metric thread diameter (min.): 1 mm, metric thread diameter (max.): 40 mm, metric thread steps: 29, bed width: 340 mm, Turning diameter in gap: 700 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 13 rpm, swing diameter over bed slide: 505 mm, overall weight: 2,400 kg, rapid traverse X-axis: 1 m/min, rapid traverse Z-axis: 3 m/min, quill mount: MK 5, three-jaw chuck diameter: 250 mm, Trens SN500 Classic — Reconditioned Center Lathe, 2001 We offer this fully reconditioned Trens SN500 Classic center lathe, year of construction 2001, completely overhauled by original factory technicians to near-new condition. Machine details Manufacturer: Trens Model: SN500 Classic Year of construction: 2001 Machine type: manual universal center lathe Hjdpfx Alozndb Ee Aju Control type: manual Max. swing over bed: 505 mm Max. swing over cross slide: 270 mm Max. swing in bed gap: 700 mm Distance between centers: 1500 mm Height of centers: 250 mm Spindle nose: BAJONET DIN (ISO702-III) B8 Spindle bore: 77 mm Spindle speed range: 12.5–2000 min⁻¹ (18 gears) Main motor output: 7.5 kW Max. torque: 1450 Nm Standard toolpost: 4-way toolpost, max. tool size 32×25 mm Tailstock sleeve: MORSE 5, diameter 80 mm, travel 180 mm Metric threads: 29 pitches, 0.5–40 mm Whitworth threads: 38 pitches, 1–80 TPI Machine dimensions (H×WxL): 1525mm ×1100 mm x 3095mm Weight: approx. 2400 kg (without accessories) Included accessories: 3-jaw chuck TOS Svitavy IUS 250/3-2-M1, ø 250 mm, B8 mount 4-jaw chuck Bison 4335-315-8, ø 315 mm, B8 mount Steady rest, ø 10–115 mm, with 3 friction contacts (rolling contacts available as paid option) Follow rest, ø 10–115 mm, with 2 friction contacts (rolling contacts available as paid option) Large steady rest I., ø 110–250 mm, with 3 friction contacts (rolling contacts available as paid option) Reconditioning scope All guideways ground and hand-scraped Spindle ground and reconditioned Tailstock quill ground All new bearings, including spindle bearings New gears New paint finish New plates (speed, feed, and thread charts) Machine is in excellent mechanical condition and ready for immediate use. Available for inspection. Geometric protocol available. Electronic machine manual on USB. For questions or further details, feel free to contact us by message or phone.

Condition: used, Year of construction: 2019, functionality: unexamined, spindle bore: 82 mm, turning diameter: 560 mm, turning length: 1,900 mm, quill stroke: 150 mm, quill diameter: 75 mm, total length: 3,830 mm, total width: 1,750 mm, total height: 1,620 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 7 rpm, overall weight: 2,850 kg, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 8 m/min, workpiece weight (max.): 400 kg, three-jaw chuck diameter: 250 mm, KRAFT TURNING CENTER ZDM 560Z × 2.000 – USED, TECHNICALLY ALMOST LIKE NEW A KRAFT turning center ZDM 560Z × 2.000, manufactured in 2015, from a private owner. Since its purchase, it has only been operated in a maximum of one shift, and in practice, significantly less. Identical in design to our current new machines ZDM 560, but at a fraction of the cost of a new investment. From a business liquidation. On-site inspection is possible at any time and is highly recommended. KEY FEATURES - SIEMENS SINUMERIK 828D basic T with ShopTurn workshop programming, including 2 electronic handwheels - Automatic 4-position tool turret AK21, tool change time 2.4 s - Fixed steady rest Ø 10-200 mm and traveling steady rest Ø 20-100 mm as standard - Manual tailstock MK 5 - Automatic gearbox, 3-speed STANDARD EQUIPMENT - CNC control SIEMENS SINUMERIK 828D basic T / ShopTurn Hjdszi Dadopfx Al Aju - 4-position tool turret AK21, electrically programmable - 3-jaw chuck Ø 250 mm, hard jaws - Fixed + traveling steady rest - SIEMENS X/Z servo motors - Door interlock, interlocked chuck guard, 2 halogen machine lights - Automatic coolant and lubrication system - German + English operating manual, CE declaration of conformity CONDITION - OPENLY COMMUNICATED Originally, a chip conveyor was installed (see order confirmation 2016). This is no longer present, and the machine is currently operating with a chip tray. Retrofitting a chip conveyor is possible upon request for an additional charge. Sold "as is, where is", no warranty. On-site inspection or a video call is strongly recommended, and an independent functional and accuracy assessment is available upon request. OUR SERVICE Online or on-site factory inspection at the previous owner's location · Transportation arranged upon request · Assembly, commissioning and operator training by our service technicians · direct German-speaking contact person for spare parts and support · Member of FDM, the German association for wholesale trade in machinery and tools. As this is a unique item, sale is subject to prior sale. Call us or send a brief message, and we will arrange an inspection appointment as soon as possible.

Condition: ready for operation (used), Year of construction: 1991, turning diameter over cross slide: 300 mm, spindle bore: 51 mm, turning diameter: 575 mm, center width: 1,000 mm, Heidenhain 2-axis control system External electrical cabinet Capacity: 1000 x 575 mm, spindle bore: 51 mm Hsdpfxszh U Aye Al Aju Ladner chuck Multi-fix turret

Condition: used, Lathe, taken directly from the workshop. In good working order. Price is negotiable. Comes with several accessories. Hedpfx Aozgak Tsl Aou

Condition: good (used), Diameter over bed: 500 mm Diameter over carriage: 270 mm Diameter of swing over cross slide: 700 mm Distance between centers: 1500 mm Diameter of tailstock spindle housing: 70 mm Travel of tailstock spindle: 180 mm Travel of cross slide: 300 mm Maximum workpiece weight: 300 kg Hodpfx Alszf Nd Hj Aou Total power: 6.6 kVA Machine weight: 1760 kg

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 Hodpszfguiefx Al Asu 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Excellent Condition Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Fixed Steady x 2 Travelling steady Fully Serviced And Ready For Production