IproMac e.K.

Condition: good (used), Functionality: fully functional, Industrial washing machine with a 400L wash tank and a 400L rinse water tank. Ielhccqowczixeljar An external oil separator is included.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 27,062 h, Functionality: fully functional, machine/vehicle number: 14591, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Capacity: 500 l Permissible cleaning medium: KWS VBA3 Front roller conveyor: 600 x 1,500 mm Control system: Siemens Simatic OP17 Heating system Heating output: 9 kW Ielhcswcfm Uocqljar Ultrasonic device Rated output: 12 kW MACHINE DETAILS Length: approx. 4 m Width: approx. 2 m Height: approx. 2.5 m Operating hours: 27,062 h Further information according to the manufacturer - without guarantee Basket dimensions: approx. 530 x 320 x 200 mm Batch weight: 75 kg Throughput depending on the workflow: max. 12 batches/h Usable solvents: Aliphatic and naphthenic hydrocarbons, non-flammable

Year of construction: 2022, Condition: used, machine/vehicle number: 220900907, Technical data: Basket diameter (mm) 1500 Usable height (mm) 500 Tank capacity (l) 500 Pump capacity (l/min) 200 Spray pressure (bar) 5 Heater power (kW) 12 Maximum power (kW) 8-15 Power supply 3-400 V Basket load capacity (kg) 350 Work time programming (min) 0-99 Temperature control 0-60 Depth (mm) 2000 Width (mm) 2000 Iaelhccqewb Dbzoler Closed/open height (mm) 1500/2500 There are visible operational scratches and signs of use on the external casings. During the inspection, it was not possible to connect to a power source and check its operation. There is no information on the intensity of use of the machine, as well as repairs and maintenance activities performed

Year of construction: 2014, Condition: excellent (used), Functionality: fully functional, YUKON DAD 2BL (built in 2014) For clean components on a continuous basis Stainless steel spray cleaning system with oil separator for continuous material flow. The workpieces to be cleaned pass continuously, in cycles if necessary, through the consecutive treatment zones. Cleaning is achieved by passing the workpieces past the permanently installed nozzle systems. For parts with a maximum dimension of 400 x 100 mm A wire-link conveyor conveys the components horizontally or vertically through the cleaning system • Circumferential nozzle frame - the offset nozzle arrangement enables cleaning on all sides • Separation of the treatment zones reduces mixing • Adaptation of the nozzles and nozzle frames to the component • Adaptation of the usable dimensions, load capacities, and pump outputs is possible The process steps take place in consecutive treatment zones: • Spray cleaning, cascading of different wet treatment zones (washing, degreasing, phosphating, rinsing, passivation) • Drying Tank volume: Wash tank: 800 liters Rinse tank: 500 liters Heating capacity: Wash tank: 48.0 kW Rinse tank: 30.0 kW Wash tank pump: 3.0 kW Rinse tank pump: 2.2 kW Ijlhccqjwbt H Hslsar Washing pump pressure: 3 bar Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature min. 45°C to max. 60°C WE HAVE 2 IDENTICAL MACHINES AVAILABLE

Year of construction: 2022, operating hours: 4 h, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 33330 052022, Boos Washing Machine Advertisement We are selling a lightly used parts washer from the Cologne-based company Boos. The washer is used approximately 2-3 times a day and achieves excellent cleaning results for us. The machine is designed for continuous operation. The machine was used very little and is therefore still in excellent condition. Since we are moving to a new location, the parts washer cannot be moved with us. This includes a control panel located in front of the machine to ensure safety when loading the machine. A sufficiently large drip tray is also included with the purchase. The machine also includes a separate oil separator. This ensures that solids are filtered out and the lifespan of the cleaning fluid is significantly extended. If you are seriously interested, I can put you in touch with a specialist who knows the machine inside and out. The washer is very robustly built, which was very important to me in my decision to purchase. The fact that only parts from reputable manufacturers were used, such as the Siemens control system, means that sourcing spare parts is not a problem. The high-pressure pumps come from Grundfos, Germany's leading pump manufacturer. If you are interested, I can provide you with a dimension sheet and connection plan. We will disconnect the machine for pickup. You will be responsible for the shipping costs. We can give you tips and recommend a company that installed the machine for us without any major problems. It weighs 2.8 tons. The price is €49,980 gross, net with an invoice of €42,000. VAT is subject to change. The location is 53840 Troisdorf. Connection for parts cleaning: Power: Voltage: 230/400 V, 50 Hz PE/N Control voltage: 24 V Connected load: 57/51 kW, 99/85 A Electrical elements: of our choice Iaolowavwrohccqler Control system: Siemens with panel Power requirement for heating: approx. 18.0 kW Power requirement for pump: approx. 5.5 kW Power requirement for high-pressure centrifugal pump: approx. 15.0 kW Power requirement for oil separator: approx. 0.25 kW Water: Filling capacity: approx. 500 l Compressed air: min. 6 bar, ½" supply line (filtered, unoiled, dry compressed air) Provide exhaust piping. New price: €60,000 Maintenance and spare parts are provided by Vapic GmbH!

Condition: used, Two decommissioned cleaning systems are for sale: System 1: Manufacturer: BVL TYPE: DTK 2TR 850/200/12800 Year of manufacture: 2006 Machine number: 2,125 Pumps: 3.0 kW each Heating: LPHW 60/48 kW Tank volume: 1,000 liters each System 2: Manufacturer: BVL Islev Ubt Ashccqljar TYPE: DTK 2TR 320/150/7700 Year of manufacture: 2007 Machine number: 2,244 Pumps: 3.0 kW each Heating: LPHW Tank volume: 900 liters each Both systems were used to clean aluminum components. Applications according to the operating instructions: BVL cleaning and degreasing systems are suitable for surface cleaning and degreasing of parts made of most common materials. The cleaning system is designed for aqueous cleaners (alkaline or acidic). Due to process requirements, the systems each have a wash tank and a rinse tank. The components are transported through the system via a conveyor chain during the cleaning process. Process steps: 1.) Transport into the system 2.) Cleaning 3.) Blow-off 4.) Rinsing 5.) Drying 6.) Removal If you are interested, please contact us.

Year of construction: 2018, Condition: new, Functionality: fully functional, A cleaning system from PALL The system was never unpacked after purchase, so it is being sold as new. Overall dimensions: (WxDxH) 2739x1802x2862 mm Working area: (WxDxH) 2000x1500x1200 mm PLC: Siemens Power consumption: 2.6 kW Reservoir tank (solvent): 56 liters Rinse pressure: 4.5 bar Ielhcsv Tyuiecqlsar This also includes a lifting arm, also in mint condition. PCC LIFTING ARM HSA200 (up to 200 kg) without tilt function Item location: Langenegg, Austria Complete price: €25,000 (new price: €95,000) Pickup only

Year of construction: 2020, Condition: excellent (used), Parts cleaning system / spray cleaning system type CM19, 2-tank (washing + rinsing) including air knife blow-off Basket diameter: 1,870 mm (octagonal) Max. load weight: 1,000 kg The basket is moved in and out by the operator onto the feeder trolley parked/positioned in front of the system (detachable/mobile). Usable height: 1200 mm Wash tank: Volume: 750 liters, spray pressure: 5.0 bar Rinse tank: Volume: 600 liters, spray pressure: 3.5 bar Total connected load: approx. 70 kW Control system: Siemens S7-1200 with KTP700 touch panel Including the following equipment: + 1 filter basket in the tank return line (washing/rinsing) for filtering coarse particles + Weekly timer for the electric heater + Steam extraction including condensate return + Automatic water refilling of both tanks + Inspection hatch/cleaning hole cover in the tank area of both tanks + DPS 75 plate phase separator for oil separation + Feeder trolley in front of the system; including extendable basket + Automatic Basket position after the end of the cleaning cycle + Manual intervention - additional manual cleaning using high pressure (up to 60 bar, continuously adjustable; including foot switch / compressed air blow-off gun / LED lighting in the chamber) + Side channel blower (5.5 kW) for blowing off the parts using an air knife + Medium filtration via bag filters (Eaton, Topline) in both circuits (washing and rinsing) + Optimized spray system with horizontal nozzle pipes on the side wall of the wash booth + Special spray system (can be optionally connected) for small components (= electric spray system) + Automatic chemical dosing 0.5-4% + Tank emptying pump using a compressed air diaphragm pump + Conductivity monitoring in the rinse tank + Remote maintenance including modem + Tanks separated into two modules; Fully insulated (various temperatures possible) + Vacuum suction gun for manual suction of scooping parts Iajlhjv Tm Ebjccqlor + Removable filter baskets in the return line + Stainless steel circulation pumps including mechanical seal and soft starter System has been used very little, as it was purchased for a special project. Condition: As new Price excludes VAT, transport, assembly/commissioning This offer is subject to change and non-binding. Subject to changes, errors, and prior sale. Used system, therefore no guarantee/warranty is provided.

Year of construction: 2025, Condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. Iaelhccqsv S Dk Soljr The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Parts that come out of production in bulk can be loaded into our device in 3 different manners. 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Do not hesitate to contact for more information. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Year of construction: 2025, Condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. Islhev S Dihoccqlear While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: used, Good working vacuum pump possibly with complete construction with water tanks, hydraulic tank, high pressure pump, high pressure hose reel, compressor... Ielhccqjv Suuujloar

Condition: new, Year of construction: 2025, operating hours: 24 h, Functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Ielov Sa I Tohccqlear Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 27,062 h, Functionality: fully functional, machine/vehicle number: 14591, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Capacity: 500 l Permissible cleaning medium: KWS VBA3 Front roller conveyor: 600 x 1,500 mm Control system: Siemens Simatic OP17 Heating system Heating output: 9 kW Ultrasonic device Rated output: 12 kW MACHINE DETAILS Length: approx. 4 m Width: approx. 2 m Iaolhcsv I Uk Uocqlsr Height: approx. 2.5 m Operating hours: 27,062 h Further information according to the manufacturer - without guarantee Basket dimensions: approx. 530 x 320 x 200 mm Batch weight: 75 kg Throughput depending on the workflow: max. 12 batches/h Usable solvents: Aliphatic and naphthenic hydrocarbons, non-flammable

Year of construction: 2019, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 481244, SPECIFICATION Thickness Mild Steel 3.4mm Maximum Cutting Length 1320mm Cutting frate 28 spm Motor 3.75kW 240 Volt Approx. Weight 1200Kg MACHINE EQUIPPED WITH Front Support Arms Side Squaring Strip 4 Edge Blade Single/Continuous Stroking Rock & pinion Backgauge Wandering Foot Pedal with E Stop Ielsv I Sbqjhccqlear Rear Guard with Light Curtain

Condition: good (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 13079, Used cleaning system Make: BUPI Ielhccqov Htnvelsar Type: 3HP Year of construction: 2005 with standard equipment 2 x washing baskets on trolley

Year of construction: 2023, Condition: new, Functionality: fully functional, machine/vehicle number: 23.025.264, The HP25T parts washer is designed for washing, with water-based detergents, at a maximum temperature of 45°C. The machine is built in AISI 304 stainless steel and is particularly suitable for washing small and medium-sized parts. This machine bases its operation on the use of a gun, fed by a 60 bar aqueous solution, via a piston pump, controlled by a pedal. * The machine is supplied with a blowing gun, included in the price. DETAILS : - Usable width : 800 mm Iaolhccsv Dt Ttoqljr - Usable depth : 600 mm - Usable height : 500 mm - Loading height : 1085 mm - Permissible load : 50 Kg - Dimensions (L*D*H) : 1140X940Xh2020mm FEATURES : - Construction in Aisi 304 stainless steel - High pressure piston pump connected to the washing gun - Level control - Electric heating regulated by a thermostat - Blowing gun (optional) - Removable work surface

Year of construction: 2022, Condition: excellent (used), Functionality: fully functional, General Project No.: 905711 Quantity: 1 pc. Manufacturer: TEKNOX Type: ROTOR M 2B HT Control: Weintek SPS Year build: 2022 Condition: Used Machine Shifts Maschine on approx. (hrs): 1-2 shift Description PARTS CLEANING Cleaning solvent: water based Front-Top-Loader Washing container with high pressure pump 900 l Cleaning/flushing container with high pressure pump 900 l Vacuum drying External pneumatic oil separator Rotary-/Swivel unit Filter for washing container Roller conveyor outside Transport Cart for 4 basketsmm Max. weight per basket max. 250 kg FURTHER EQUIPMENT Modem for remote diagnosis and TeleService GENERAL TECHNICAL DATA Air supply 8 bar Mains fuse 108 A Machine weight approx. 1800 kg Remarks Ijlhccsv Azd Roqloar We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: like new (used), Functionality: fully functional, Year of construction: 2018, MIELE laboratory dishwasher with AD water connection, liquid dosing, DryPlus & conductivity monitoring Iolhcjv Aknrocqlsar • Capacity/batch e.g. 128 laboratory bottles • Safety – rinsing pressure, spray arm and conductivity monitoring • 72% less water consumption • Efficient hot air drying – DryPlus FURTHER TECHNICAL DATA PLEASE REFER TO THE ATTACHED PDF

Year of construction: 2019, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: 3227, The OceanRW is an automatic cleaning and degreasing unit with electric lifting gate and a removable basket with detachable frame of the basket (height: 150mm). The basket is driven in and out onto stationary table attached to the front. This is a demonstration cleaning system, subject to prior sale. Cleaning system: spray cleaning with flat spray nozzles Functional principle: rotating parts holder with a static nozzle system for all-round cleaning of the parts System accessories: - Draining pump - Floor drip tray - Steam extraction fan - Steam condenser Air-cooled - Duplex filter 100 μm Ielhccqjvy Ekvolear - Einfachfilter 50 μm - Stainless steel nozzles - Insulation system components - Cascade guide - Plate phase separator 500 - Increased spray pressure to 8.5 bar - Loading carriage - Manual lance incl. high-pressure cleaner - Centre lance - Aqua-Spülmeister

Year of construction: 2007, Condition: reconditioned (used), Functionality: fully functional, Used cleaning system REK Very little used Iaelhccqevyp D Tslor Full vacuum technology 12 kw distillery with hot-sliding technology, Basket size 530x320x200mm

Year of construction: 2021, Condition: like new (used), Functionality: fully functional, Steam sterilizer VS 262839 L & laboratory dishwasher STEELCO DS 610 SL - set offer NEW PRICE in 2021 was € 162,000 for both systems. For sale is a high-quality set consisting of a steam sterilizer VS 262839 L and a laboratory dishwasher STEELCO DS 610 SL. These devices are ideal for laboratory, research and pharmaceutical applications to ensure the highest standards of purity and sterilization. The systems have been professionally dismantled and safely packaged. They are located in Solingen and can be viewed there by appointment. All technical documents, operating instructions and documentation are available in full in writing. 1. Steam sterilizer VS 262839 L – Two-door with side sliding door Technical data: Model: VS 262839 L Year of manufacture: 2021 Operating hours: 0 (according to previous owner) Type: Steam sterilizer with side sliding door (two-door) NEW PRICE in 2021 = approx. € 107,000 verifiable Equipment & functions: Two-door system for optimal process control Stainless steel construction for durability and cleanroom suitability Integrated electric steam generator in stainless steel Water ring vacuum pump for efficient sterilization Air differential seal for cleanroom sealing USB port for data recording Validation port and FO control for precise process control Transport trolley with docking lock for safe loading GMP and FDA compliant 2. Laboratory dishwasher STEELCO DS 610 SL – Two doors with 2 rinsing levels The STEELCO DS 610 SL belongs to the Miele Group and stands for the highest quality in the laboratory and pharmaceutical industries. Technical data: Model: STEELCO DS 610 SL Year of manufacture 2021 Usable volume: 220 liters Type: Two-door laboratory dishwasher with 2 rinsing levels NEW PRICE in 2021 = approx. € 55,000 verifiable Equipment & functions: Full glass doors for visual inspection during the rinsing process High capacity - cleaning of vessels up to 50 liters Integrated hot air drying with HEPA 14 filter Dosing volume control and conductivity monitoring Interface for process documentation (GMP compliant) Multi-component filter system for optimal water filtration USB interface for data recording Made entirely of stainless steel (1.4404 / 316L) Scope of delivery & accessories: Base trolley and various modules for specific glassware Service and operating manuals (German and English) Condition: Both devices are used, but in very good condition. Iajlhccqjvx Addolor Location: Solingen, viewing possible by appointment. Interested? Contact us for further details and a personalized offer.

Condition: good (used), Cleaning washing defatting PERO type ROBOMAT 7A Iaolhccsvwlupoqlor Useful length: 1600 mm Useful width: 1040 mm Useful height: 960 mm Loading height: 800 mm Maxi load weight: 1500 kg

Condition: new, Functionality: fully functional, Year of construction: 2025, The basket spray washer is equipped with a control panel on which the washing and drying process is started. The machine is made of AISI 304 stainless steel, which guarantees its long service life. The spray system in the working chamber is located on the top, side and bottom, which guarantees a very good washing range. Technical data: Basket diameter: 900mm Usable height: 450mm Tank capacity: 150l Iaslhcevr Hbascqljr Working spray pressure: 8 bar Heater power: 7.5 kW Power supply: 380V Basket load capacity: 300kg Working time programming: 0-30min Temperature control: 0-120 degrees C Additionally, the washer is equipped with an automatic drying step. Our offer also includes other types of spray washers with basket diameters of 550, 750, 900 and 1100 mm.

Condition: used, Year of construction: 2010, operating hours: 36,283 h, Functionality: limited functionality, total width: 1,800 mm, total length: 3,000 mm, total height: 3,000 mm, maximum load weight: 4,000 kg, heating capacity: 18 kW (24.47 HP), Currently in stock, available immediately Can be completely or partially overhauled upon customer request. Iaelhsvmqrfeccqler

Year of construction: 2017, Condition: excellent (used), Tank capacity 85 l max. load 150 kg Ø basket 700 mm Iajlhccsvf D Abjqler