Peter Hirsch

Condition: ready for operation (used),

Condition: used, Used Schwarte-Milfor vertical stainless steel storage tank: - Manufacturer: Schwarte-Milfor - Capacity: total capacity 5720 litre, working capacity 5300 litre - Construction material: AISI 316L - Internal rated: -1/3 bar maximum pressure at 139°C maximum internal temperature. - Dimensions: 1500 mm diameter x 2500 mm straight side x approx. 4480 mm total height, diameter of vacuum ring reinforcement is 1652 mm. - Welded dished top and welded conical bottom. - Central top inlet/bottom discharge internal dia approx. 100 mm. - Has top manway with diameter 450 mm. - Mounted on (4) lugs. Specifications: Capacity: 1,430 gal Diameter: 1,500 mm Height: 2,500 mm Type Of Heads: Dished top head and conical bottom Vertical/Horizontal: Vertical Type of stainless: AISI 316L Guedpfxex Hwcce Ab Ujk Legs/Lugs: 4 lugs

Condition: used, Used Breddo model LORWW 100 US gallon (378 litre) capacity stainless steel vertical jacketed mixing vessel/Likwifier. Has approximately 1200mm diameter X 470mm deep tank with welded cone bottom and flat open top with hinged lids. Has approximately 250mm diameter bottom entry general purpose impeller belt driven by 30 hp 415 volt 3/50 1500 rpm motor with Allen-Bradley Powerflex 70 inverter drive. Also includes baffle bar. External jacket rated 125 psi (8.6 bar) working pressure at -20/+400 degf (-29/204 degc). Mounted on stainless steel mobile base with diaphragm pump local controls. Specifications: Capacity: 100 gal Diameter: 3.94' Gedpfxex Hwb Sj Ab Uouk Height: 1.54' Vertical/Horizontal: Vertical Type of stainless: Stainless Steel Legs/Lugs: Mounted on stainless steel mobile base

Condition: used, Used Stainless Services Ltd approximately 1,370 litre 316L stainless steel vertical storage tank. Unit measures approximately 1200mm diameter x 770mm straight side. Unit has welded dished top and welded cone bottom heads. Internal rated 2.5 bar design pressure at 150 deg.c. Unit mounted on (4) legs. Guodjx Hwb Espfx Ab Usk Specifications: Capacity: 361.9 gal Diameter: 3.94' Height: 2.53' Type Of Heads: welded dished top and welded cone bottom Vertical/Horizontal: vertical Type of stainless: 316L Legs/Lugs: 4

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Gujdpfx Abex Hwbxs Uek Specifications: Capacity: 4,000 L Diameter: 1,800 mm Straight Side: 2,450 mm Material of construction: Stainless Steel Type Of Heads: Welded Dished Top and Bottom Internal Pressure: 6 bar Jacket Pressure: 9 bar Internal Temperature: 130°C Type of stainless: Stainless Steel Legs/Lugs: 4 Lugs

Condition: good (used), Year of construction: 2008, WEILER E60x2000 CNC Cycle Lathe with Equipment Year of manufacture: 2008 Control: SIEMENS 840D/SL1 Machine number: DG04 Centre distance: 2,000 mm Equipment: - Chip protection covers - Reinforced coolant system, 10 bar - Chip conveyor - Central lubrication - Machine leveling elements - DXF import Scope of delivery includes: - FORKHARDT 315 mm three-jaw chuck - RÖHM 315 mm three-jaw chuck - PARAT quick-change toolpost - Approx. 20 tool holders - Turning tools, live and dead centers, sets of jaws, and much more Gjdpfex Hwbrsx Ab Ujuk - Operating manual/documentation - Machine parameters on storage medium Equipment, technical data, control & installation plan – see PDF. Illustration, content and data supplied without warranty, therefore non-binding. All other accessories visible in the photos or video are not included in the scope of delivery and are therefore not a part of this sale. The scope of delivery only comprises the accessories explicitly listed here, in the order confirmation, and invoice. FCA (Free Carrier) loaded on truck, D-04643 Geithain Packaging only Delivery: immediate Subject to prior sale / Payment due immediately upon conclusion of sale.

Condition: new, Year of construction: 2025, overall weight: 990 kg, opening width: 788 mm, total width: 920 mm, total length: 2,072 mm, cutting force: 40 t, pressure: 220 bar, operating pressure: 220 bar, warranty duration: 12 months, Hydraulic car body removal shears Weight: 990 kg - Total length: 2072 mm - Width: 920 mm - Rotation: 360 degrees - Cutting force: 40 tons - Oil flow: 50-70 l/min Gsdpfxjx Hwblo Ab Ujuk - Oil pressure: 220 bar - Excavator weight: 18-24 tons

Condition: excellent (used), Year of construction: 2016, operating hours: 42,281 h, functionality: fully functional, Screw compressor Kaeser DSD240SFC, 132 kW, 8.5 bar with 23.47 m³/min. Integrated frequency converter. Guodpfxex Hwa Ie Ab Ujk

Condition: used, Year of construction: 2008, BOTTERO 535 AVM-37 – Year 2008 Laminated Glass Cutting Table Max Cutting Length: 3700 mm Thickness: Float: 3-8 mm Laminated (2+2) (8+8) mm Power: 23 kW + BOTTERO 100 BLM – Year 1998 Godpfxjx Hwaus Ab Uouk

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S2A130951, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Gusdpfx Abox Hwane Uok Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck.

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V270-SX -Welding power: max. 270 A -ground cable -Dimensions: 600/300/H390 mm -Weight: 31 kg Gsdpfx Aox Hwaheb Ueuk

Condition: new, axle configuration: 1 axle, N2921 Traffic control vans Various models of traffic control vans. Gujdpfx Abjx Hwabe Ujk From left to right reference number N2923, N2922, N2921 call or email for more information. Condition: New

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Gjdpfxex Hv U Re Ab Ueuk Specifications: Power: 11 kW

Condition: used, Comprehensively tested, used Winkworth reportedly model GU660 stainless steel ribbon blender. Manufacturer: Winkworth Material: Stainless steel Capacity: 660 litre (product dependent) Mixing trough: 1,750mm long x 700mm wide x 790mm deep Discharge Type: air operated discharge value Gusdpfxsx Hv Uwo Ab Uok Type Of Blades: single interupted ribbon Motor: 7.5kw, 1450rpm, 415volt, 3/50 motor through Opperman type HTM7 gearbox rated 38.2/1 reduction rated, 37rpm output. Also includes: Hinged lid with clamps. -Control panel with castell key interlock. -Mild steel mobile base. A video of this mixer is available below. Specifications: Capacity: 23.3 ft³ Material of construction: Stainless steel Width: 27.56" Horsepower: 10 hp Length: 68.9" Dimensions: 68.90in x 27.56in x 31.10in

Condition: used, Comprehensively tested and refurbished, used Tatham 304 stainless steel twin shaft paddle mixer. Manufacturer: Tatham Material: Stainless steel Capacity: 750 litre Mixing trough: 1000mm wide x 1500mm long Discharge Type: pneumatically operated twin bomb door discharge Type Of Blades: Twin shaft paddles Motor: 15 kw 415 volt 3/50 motor Also includes: Mild steel frame Guedpfxsx Hv Uqs Ab Ujk A video of this mixer is available below.

Condition: used, Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2016 Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter. Type Of Blades: T-Arm ploughshare blades with drive/gearbox. A video of this mixer is available below. Specifications: Gsdpfx Absx Hv Uks Uouk Bowl Volume: 105.7 gal Material Of Construction: Stainless steel Dimensions: 1300mm long x 800mm diameter

Condition: used, Used Oliver & Batlle model HM-15 stainless steel bead mill. Guodpfx Aex Hv Udjb Uok Has stainless steel jacketed chamber which measures approximately 450mm long x 250mm diameter. Approximate total capacity 15 litre (product dependent). This equipment has a stainless steel rotor belt driven by 18.5kw, 415volt, 3/50, 1460rpm motor. Click on the link below to see a video of the machine running.

Condition: used, Unused from new Caldereria Teruel (Spain) approximately 1,000 litre 316L stainless steel IBC. Internal measures approximately 1110mm diameter X 1230mm straight side. Mounted on stainless steel forkliftable base. Hinged manway lid on top dish with fast release clamp. 40mm side bottom discharge with valve. Includes 12 months warranty. In stock and immediately available. Godpfx Abex Hv T Ts Usuk Specifications: Material Grade: 316L Stainless Steel Dimensions: 1110mm diameter X 1230mm straight side

Condition: used, Used Gericke type N450x800 MK2 nibbler. Unit has mild steel body with stainless steel 4-blade rotor, screen frame & screen. Unit direct driven with motor/gearbox. Has approximate throughput capacity of 30,000 l/h (product dependent). Gusdpfx Aox Hv T Hob Uok Equipped With: Per RD 13/06/25 on hold for CcM Technologies, UK.

Condition: used, Used Niro Mobile Minor stainless steel laboratory spray dryer. This unit has an approximate evaporation rate of 1 to 7 kg/hr depending on product. Has stainless steel chamber approximately 800mm diameter x 915mm straight side. Chamber is lagged and clad. Has electric heater, cyclone and pipework. Unit is mounted on mobile frame. Includes stainless steel Niro centrifugal air operated atomiser. Gujdox Hv Tyjpfx Ab Ujk Click on the link below to see a video of the machine running.

Condition: used, Reportedly unused 304 stainless steel vessel manufactured by ROLEC Prozess und Brautechnik GMBH. New 2015. Total volume 160,000 litre, useful capacity 120,000 litre. Max. working over pressure 0,9 bar (15 PSI)-Conical angle: 70 °-Double jacket. Vessel :Material: stainless steel 1.4301 (304) - Tank support: 4 stainless steel feet with floor plates Cooling :Cooling liquid: glycol - Water temperature: -3°C - Cooling section cone: 1 - Cooling surface of the cone: 12 m² - Cooling surface of the side walls: 48 m² Vessel dimensions :Inner Ø : 3900 mm (12' - 9 5/10") - Outer Ø : 4100 mm (13' - 5 4/10") - Shell height : 9000 mm (29' - 6 3/10") - Cone outlet height : 1000 mm (3' - 3 4/10") - Total height : 13600 mm (41' - 0 1/10") plus platform and fittings - Various inlets and outlets Specifications: Capacity: 31,700.6 gal Gedpfx Aox Hv Ttob Usuk Diameter: 13.12' Height: 44.62' Type Of Heads: Conical Vertical/Horizontal: Vertical Type of stainless: 304 Legs/Lugs: 4 stainless steel feet with floor plates

Condition: used, Used Alfa Laval model BTPX 205SGD-34CDP-50 stainless steel clarifier centrifuge. Skid mounted system with steam sterilization provision. Direct driven by 6.5 kW 415V 3/50 2900 rpm motor. Maximum bowl speed 9650 rpm. Includes some tools. Gujdpsx Hv Tmefx Ab Uek

Condition: used, Used GUEDU stainless steel mixer Type 90 NO PO Total volume 90 litre Agitated at the bottom of the vessel 2 blades in " s " Motor 5.5 kw – Hp 7.5 – 3x 220/380 volts 6 x 2 blades lump breaker Motor 1.1 kw – Hp 1.5 – Rpm 1500 – 3x 220/380 volts Guodsx Hv Tgepfx Ab Uek Double jacket on vessel and cover

Condition: used, Used stainless steel GOAVEC cooking bowl 80 litres-Total volume : approx. 120 litres-Using capacity : approx. 80 litres-Vessel Ø 680 x 700 mm - Outlet by stainless steel root rotary pump-Agitator anchor with scraper : Hp 1- Rpm 7 to 33 - 3x 220 x 380 Volts-Agitator paddle : Hp 0.33 - Rpm 40 - 3x 220 x 400 Volts- Gedpfsx Hv Tasx Ab Ujuk Double jacket-With electric control panel-On mobile frame

Condition: used, Used dissolver by Oliver+Batlle S.A.(ES) type DISPERMIX 50 designed for work on vacuum. Machine has non-corrosive shaft with working length 144.5 cm. Shaft is belt driven by el motor 40 kW, 1470 rpm, 380/660 V, 50 hz. Ex design of motor (ExeG). Mechanical adjustment of shaft rotation. Shaft is equipped with stainless steel toothed disc, with diameter 350 mm. Rising and lowering of agitator in range 110 cm and is driven hydraulically. Machine has also lid cover, with diameter 108.5 cm, for work on vacuum, rised and lowered by two hydraulical actuators. Together with mixer there are: - vacuum pump Pfeiffer Vacuum model Hena 200, output up to 240 m3/h, driven by el motor 5.5 kW. Guedox Hv S Nepfx Ab Uek - stainless steel mixing pan with volume 500 l. Mounted on 4 leg, no bottom discharge outlet. - local control panel integrated with two hydraulic devices. Specifications: Power: 40 kW