Ludek Macourek - Prego

Condition: used, Year of construction: 2008, functionality: fully functional, Type: Edgebander - single sided Manufacturer: BRANDT Model: Optimat KDF 550 C Year: 2008 Location: Lithuania Terms: as-is where-is Hedpfx Ajxwwb Rogpofp Board thickness 60 mm Edge thickness 8 mm Feed advance 11 m/min Length x width x height 5860.0 × 1560.0 × 230.0 Weight 2600 kg Feed speed: 11 m/min Workpiece thickness: 8 – 60 mm / edge thickness: 0.4 – 8 mm / working height: 950 mm Electricity supply: 400 v – 3 phase – 50 hz / pneumatic pressure: 6 bar / noise emission level: 80…87 db(a) Extraction diameter: 1 × 120 mm / 2 × 100 mm / roll separation: max. 3. 0 × 45 mm / 0. 8 × 65 mm

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: 0-200-73-4868 Excellent condition – used only for demonstration and sample production. The machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical specifications and equipment: - Continuously adjustable feed speed: 16–25 m/min - Workpiece thickness: 8–60 mm - Fixed fence on the left-hand side - Adjustable working height - Pre-installed for LOOPTEQ O-200 / O-300 return system - Feed lock system - Workpiece alignment at infeed with roller support - Top pressure unit - Sizing package with DIA joint trimming cutter set WD40 - Gluing package with preheating up to 60 mm thickness - Adhesive application system with emptying function - Edge magazine with two vertical roll holders - Pressure zone - PERFORMANCE2 package - End trimming unit PK25 - Rough trimming unit BF10 (I-HM straight cutter set) - Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) - Multi-scraper MN21 automatic with profile knife set - Cleaning agent spraying unit - Glue joint scraper FA20 BASIC - Buffing unit FP10 top and bottom Hjdoxwuryepfx Agpofp - PowerControl PC23 PowerTouch control system - TAPIO Ready - Ethernet network connection - Wired manual control for setup operation - WOODCOMMANDER software package with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions - Documentation in Slovenian (digital and paper format) - Remote service enabled

Condition: excellent (used), It is in perfect working condition, looks very good and has few operating hours. It has pre-milling, circular saw cutting, up and down milling, radius tickling, surface tickling, and polish. Hedjxwqmaepfx Agpefp

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Hfjdpfx Aexwhtwegpjp

Condition: like new (used), functionality: fully functional, Edgebanding machine for curves, as new Hedpfx Agoxwd Abopofp

Condition: used, Year of construction: 1996, Plate running direction: from operator to the left Max. edge thickness: 8.0 mm Min. workpiece width: 70 mm Feed speed: 11 m/min Heating-up time: 4.5 min Automatic roll magazine: Yes Cutting shears up to: 0.2 - 3.0 mm Individual edge feed: Yes Automatic gluing: Glue pot with granulate on top Cut-off saw: fixed at 90° Flush-milling unit: Yes Combination milling unit: Yes Aggregate display: glue display Control type: manual Operation: selector switch / push buttons Travel device: Yes Protective hood: Yes Working height or infeed table height: 870 mm Approx. weight: 670 kg Dimensions: 3600 x 1400 x 1200 mm Motor power: 11 kW Extraction diameter: 120 mm Storage location: Supplier Hfsdpoxwdp Uofx Agpjp

Condition: excellent (used), Year of construction: 2018, Edge banding machine Manufacturer: Felder Model: G360 Year of manufacture: 2018 Operating hours: approx. 673 h Edge thickness: 0.4 - 3 mm Workpiece thickness: 10 - 45 mm Feed speed: 8 m/min Total power: 5.5 kW Overall length: approx. 3,200 mm Hedoxwb Iujpfx Agpefp Jointing unit: Yes End trimming unit: Yes Flush trimming unit: Yes Surface scraper: Yes

Condition: excellent (used), Year of construction: 2004, used Hebrock edge banding machine model top 2000 year of manufacture 2004 with hot melt adhesive application to the workpiece for edge material up to 3 mm, maintenance-free glue pot, Hfedpjxvqrmjfx Agpjp HF end trimming station (18,000 rpm) HF milling station (18,000 rpm) with replaceable insert cutter (combination version), feed rate approx. 10 m/min extendable workpiece support length approx. 3100 mm

Condition: excellent (used), Year of construction: 2012, Brand KDF110 Optimat Ambition - only 1150 hours Brand: Brandt Model: KDF 110 Year of manufacture: 2012 M-Nr.: 0-261-20-6960 Control system: Easy Control 10+ contactless line control, feed-regulated with start-stop optical-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / product guidance: Central control, 2 roller tracks Jointing milling unit: 2 x 0.75 kW, 200 Hz including jointing cutter set in DIA version with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing station for hotmelt glue with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control unit Pressure zone: First roller driven and 2 free-running rollers for excellent and consistent compression End trimming unit: 0.18 kW, 12,000 rpm Profile milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counterrotation, 3-position adjustment chamfer/radius (R2), overhang and straight, max. 3 mm edge thickness with Siko counter Profile scraper: Max. 3 mm edge thickness Surface scraper: Reversible blade Chain width: 80 mm Edge material in rolls: 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: • For workpiece thickness 8–22 mm: 70 mm • For workpiece thickness 23–40 mm: 120 mm (Depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Overall length: 3,672 mm Hsdpsxvirfsfx Agpofp Location: ex stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Edgebander SCM K360 R HP Fluids Pre-milling cutters, Glue application by roller, Interchangeable glue tank Additional glue tank Pneumatic pre-cut guillotine, Fluids End trimming saws angle-adjustable for finishing Top/bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Profile scraper (multi R1-R2), Cleaning fluids Flat scraper, Polishing unit, Hsdpfx Aexva Tmegpefp The machine features NC cutter control and pneumatic package, Max workpiece height 60 mm, Max edge thickness in roll 3 mm, Feed speed max 11 m/min, Machine in very good condition. Original mileage: 65,000 meters

Condition: good (used), Year of construction: 2007, functionality: fully functional, Edgebander Kuper Optimat KDF 660 – used, ready for demonstration The used edgebander Kuper Optimat KDF 660 is in good condition and is currently under power, allowing for an on-site demonstration. Details: Model: Kuper Optimat KDF 660 Hfsdpfx Asxu Iafjgpjp Condition: used, functional The machine is connected and can be tested Service: Removal and loading of the machine can be organized upon request. If interested or to arrange a viewing, please feel free to contact us!

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: limited functionality, Machine was fully working condition in 2021. Then dismantled and stored in warehouse. LEFT side Hfjdpfoxu H S Tsx Agpjp

Condition: used, Holz Her STREAMER 1054 FÜ + PU Hedpfxoxu E Nwo Agpofp Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° bevel of the mitre saws pneumatic milling unit, flush milling 6 mm, radius milling - chamfer milling - 15°, pneumatic via control panel scraper unit for chamfers and radii with 2 scraper holders pneumatic engagement and disengagement surface scraper unit - finish spraying device - PU machine is WORKSHOP REFURBISHED in TOP CONDITION

Condition: ready for operation (used), Year of construction: 2006, This IMA Combima Systems/I/R75/1370 edgebander was manufactured in 2006. It handles workpieces ranging from 250 to 2800 mm in length and 115 to 1300 mm in width, with thicknesses up to 40 mm. Designed for materials like chipboard and MDF, it features a hot melt adhesive applicator and a servo edge feed system. Ideal for high-quality edge banding, consider the opportunity to buy this IMA Combima Systems/I/R75/1370 edgebander. Contact us for more information about this machine. Application Types Hfjdpfx Ajxuw Daegpep Edge Banding

Condition: used, Year of construction: 2006, Used, in excellent condition Make: Hebrock Model: top 2000 Year of manufacture: 2006 Machine no.: 6487 Edge thickness: 0.5 mm - 3 mm Workpiece height: min. 10 mm, max. 45 mm Workpiece width: min. 90 mm Feed: 10 m/min Cutting from roll Cut-off unit Flush and radius milling Mobile Extraction connection D 100 mm Space requirement approx. 3100 mm x 1320 mm x 1300 mm Weight approx. 550 kg Total connected load: 15.75 A / 7.27 kW Location: 97447 Gerolzhofen, loaded free, unpacked Offered as seen and inspected, without guarantee or warranty Hsdpfxsxuv Rfs Agpsfp

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, DETAILED PHOTOS AND VIDEO AVAILABLE ON DRIVE, PLEASE CONTACT ME VIA SMS TO RECEIVE THEM. PLEASE DO NOT MESSAGE VIA OLX, ONLY CALL OR EMAIL. TECHNICAL SPECIFICATIONS: Manufacturer: BRANDT Model: KDF 650 Year of manufacture: 2011 Condition: Used, in very good condition Edge band thickness: 0.4-3 mm Minimum workpiece width: 70 mm Minimum workpiece length: 140 mm Hsdpjxuu N Hefx Agpofp Maximum edge height: 60 mm Maximum power consumption: 21 kW Machine dimensions: height 2300 mm, depth 1550 mm, length 5800 mm Weight: 2600 kg Power supply: 230V/400V EQUIPMENT: - Electrically operated infeed fence - Rare, automatic edge feeding system - Pre-milling unit - Glue application unit - Pressure roller unit - End trimming unit (straight and angled) - Top/bottom trimming unit - Corner rounding unit - Profile scraper - Flat scraper - Buffing unit - 3 units for spraying anti-adhesive fluids TECHNICAL CONDITION: - Machine is fully operational and currently in use - Regularly serviced by authorized service - Ready for immediate operation - Low operating hours PRICE: 135,000 PLN net (negotiable), VAT invoice will be issued LOCATION: Bochnia, Poland TRANSPORT: Collection by the buyer

Condition: used, Holz Her Perfect 1422 K + PU Heavy-duty version, for edge banding up to 20 mm thickness Fully automatic roller magazine – crosscut shear Fully automatic edge magazine for strip material Cartridge + PU gluing station Flush trimming Multifunction milling unit, flush – chamfer – radius milling with mechanical digital adjustment Soundproof enclosure CE-compliant design Hsdjxurqbopfx Agpefp Machine is FUNCTIONALLY TESTED and in VERY GOOD CONDITION available ex-stock Lieboch

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 06601, feed rate X-axis: 12 m/min, empty load weight: 2,500 kg, Equipment: CE marking, TECHNICAL DETAILS Maximum edge banding thickness: 12 mm Minimum workpiece thickness: 10 mm Maximum thickness of roll material: 3 mm Feed speed: 12 m/min Heating time: 10 min Guillotine for trimming: 0.2 – 3.0 mm Hsdpfx Asxuqwmogpofp MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,500 x 1,000 x 1,600 mm Weight: 2,500 kg EQUIPMENT Jointing unit with 2 milling units Automatic roll magazine Solid edge magazine Pre-heating of panels by infrared heater Automatic gluing with granulate glue pot Cross-cut saw with programmable angle setting Multi-function unit Corner rounding/copying unit with 2 motors Profile scraper Flat scraper Buffing unit Unit indicator with mechanical numeric display Control via operator panel Operation via selector switch / push buttons Protective hood CE marking

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 80709, plate height: 45 mm, empty load weight: 2,900 kg, operating speed: 333 mm/s, Equipment: CE marking, TECHNICAL DETAILS Maximum panel thickness: 45 mm Edge band thickness: 13-60 mm Maximum edge material thickness in rolls: 3 mm Minimum panel width: 50 mm Minimum panel length: 150 mm Working speed: 10 - 20 m/min MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,950 mm x 1,700 mm x 1,530 mm Weight: 2,900 kg EQUIPMENT Glue pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting edge trimming and chamfering unit RI 700 Compact edge scraper RBK501 Brushes SP700 Edge sanding unit LV 700 Heated infeed guide PLC control Panel support guide Hedpfx Ajxuqufsgpsfp Large-diameter roll holder Edge cutting device for 3 mm thick rolled edges CE certification

Condition: good (used), functionality: fully functional, Control unit, top 1902 Edge feeder for strips & rolled material 1906 Glue application station (sensing nozzle) with cartridge reservoir Processing of EVA & PUR cartridges 1918 Pneumatically swiveling cutoff unit 0 - 12° Hfodpfjxuiyaox Agpop 1942 M Multifunction milling unit flush/chamfer/radius, pneumatic with motorized adjustment 1929 Radius scraper blade 1983 Contour milling unit 1964 Surface scraper blade 1940 Scraper unit

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 202.01.006.16, feed rate X-axis: 12 m/min, total length: 3,940 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, Regularly serviced by the manufacturer All operating manuals available Replacement due to upgrade to a larger machine Hsdpexuik Sefx Agpefp

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display pre-milling unit before gluing area fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed Hjdpfx Agoxuhpajpefp finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: used, Year of construction: 2024, functionality: fully functional, One-sided edge banding machine with NC-controlled adjustment via 18-inch touchscreen (L-Motion) Edge material: - Roll stock 0.4 - 3 mm - Solid wood strips up to 5 mm Workpiece thickness: 10 - 60 mm Minimum workpiece length: 120 mm Minimum workpiece width: 75 mm Minimum workpiece width with corner copying: 170 mm Feed speed: 16 m/min With corner copying: for thicknesses 16, 18 & 19 mm, feed speed 12 m/min Aggregate equipment: RIEPE separating agent application Jointing milling unit with 2 counter-rotating, demand-controlled motors, equipped with diamond-tipped spiral cutterheads Extra: Diamond milling tools, 65 mm height instead of 30 mm Automatic edge feeding with swiveling reel table, diameter 800 mm, with automatic strip magazine, spiked roller for solid wood strips Glue pot with automatic temperature control and stand-by function; glue roller temperature adjustable separately, capacity approx. 1.5 kg Extra: Glue run-out function, Teflon-coated drip tray, customized software for EVA/PU glue Extra: Quick-change glue pot system Pressure zone with 1 powered main pressure roller and 2 free-running follow-on rollers End trimming unit with 2 HF motors, 0.55 kW, pneumatically tiltable 0 - 10 degrees, controlled from the operator panel Combined milling station with 2 HF motors, 0.55 kW, 12,000 rpm L-Motion multifunction tool (straight & 3 different radii), horizontal & vertical tracing, motorized positioning via controller Extra: nesting package for combined milling unit Corner copying milling unit with 2 motors. Automatic processing of end edges up to 2 mm edge thickness (not recommended for soft- & postforming profiles) with 2 motors, 0.27 kW each 2 L-Motion motors for positioning the horizontal tracing shoes, plus tool positioning Radius scraper with L-Motion multifunction tool (3 different radii), motorized adjustment with 3 L-Motion motors Extra: nesting package for radius scraper Flat scraper unit with pneumatic in/out control from the operator panel Hfodpfx Asxugplsgpep RIEPE cleaning agent spray device Buffing unit with 2 motors, 0.09 kW each Control system: 18.5-inch graphic touchscreen with L-Motion software Extra: potential-free contact for connection to a return conveyor Total machine length: 4,890 mm The machine is being replaced due to insufficient capacity The return conveyor system visible in the photos is not included in the scope of delivery.

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Condition: very well maintained; low operating hours Equipment and technical data: - With PLC control including touchscreen Hsdpoxua Rcjfx Agpjfp - With joint milling unit with DIA tool up to 2 mm milling depth (maximum joint thickness 1 mm for special materials such as multiplex) - With extendable workpiece support - With quick-heating glue pot with glue change device - With cross-cut saw - With combination milling cutter r = 2 mm with separate pneumatic adjustment - With corner copying unit r = 2 mm - With surface scraper - Maximum edge thickness: 2 mm - Minimum - maximum workpiece thickness: 10 - 40 mm - Minimum workpiece length: 180 mm - Feed speed: approx. 7 m/min - Ready for operation: approx. 3.5 min - Power consumption: approx. 7.4 kW - With undercarriage - Extraction port: 1 x 140 mm Dimensions: approx. 4,200 x 1,300 x 1,400 mm Weight: approx. 750 kg Availability: approx. end of January 2026 Location: Hesse

Condition: used, OTT Tornado FÜ + PU SPS-compatible control, 7" TFT touch color display CM-CombiMelt for EVA and PUR hot melt adhesives Pre-milling unit – jointing Fully automatic roller magazine Fully automatic edge magazine Pneumatic flush trimming 0–3° Flush milling – 12 mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounding Radius scraper Flat scraper Hjdpfx Aext N E Hogpefp Soundproof cabin with room extraction Cleaning set with spray unit, fine buffing device, and glide agent spraying unit – PU First delivery 2008 Machine is FACTORY REFURBISHED in TOP CONDITION Available from stock Lieboch