Motec CNC-Technik GmbH

Condition: good (used), Year of construction: 2014, Technical details shown on pictures. Hsdoykufhspfx Aadjfc Parts shown by hand not come.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, total height: 2,500 mm, total width: 1,800 mm, table load: 250 kg, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, product length (max.): 2,400 mm, This 3s SPINNER VC 560s was manufactured in 2007. It is a CNC Milling Machine featuring a 3-axis configuration, prepared for a 4th axis (included but not installed). The machine is operational and comes complete with all tooling and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, consider the opportunity to buy this SPINNER VC 560 vertical machining centre. Contact us for further details. • Condition: Operational; reportedly very low usage • Control: To be confirmed • Power supply: 3 x 400 V / 50 Hz • Total power: 20 kVA • Compressed air: 6 bar • Table: 650 x 410 mm; 3 T-slots (14 mm) • Rapid traverse: 48 m/min • Tool magazine: 24 positions; max tool Ø 77 mm (125 mm with adjacent pocket free); max tool length 200 mm; tool change time 1.3 s • Coolant system: 250 L • Spindle hours: Unknown (reported very low) Additional equipment • New 4th axis (included, never installed, unused, still in box) Hedpfjykt T Dox Aadofc • Complete tooling set included (as shown in the pictures) • Tool cabinet (as shown in the pictures) Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2000, functionality: fully functional, Accessories as shown in the pictures. Dismantling and loading by the seller. Transport to be arranged by the buyer. Sale only within the EU. Hfodpfsyktc Sox Aadsc

Condition: used, Year of construction: 1997, x-travel 600 mm y-travel 500 mm Hsdpfxoykb Hlo Aadefc z-travel 450 mm Control Heidenhain TNC 426 PB tool change unit 22-fach tool taper SK40 turning speeds 5-6.300 U/min table-size 900 x 530 mm table load 400 kg total power requirement 9 kW weight of the machine ca. 3550 kg dimensions of the machine ca. 2,2 x 2,7 x 2,05 m 3-axis vertical machining centre MIKRON UM 600, built in 1997 In excellent technical condition, all guides have been freshly scraped. The spindle has been re-mounted and has since been used for only 262 hours. New power unit for spindle drive installed. Accessories: Heidenhain TS 642 touch probe system 2 new vices SK40 tool holder

Condition: used, Year of construction: 2017, travel distance X-axis: 560 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, controller model: MAZATROL SmoothG, spindle speed (max.): 10,000 rpm, coolant supply: 15 bar, The machine is in very good condition and can be inspected under power. Technical Data: Hjdpfx Aaeyi Shwodefc Control: Mazatrol Smart conversational control X 560mm / Y 430mm / Z 510mm Clamping surface 900x430mm Spindle 18.5kW 12000 rpm 30-position tool changer with automatic measurement and tool breakage monitoring, tool change time 1.3 sec Internal cooling 15 bar Equipment: - Productivity package - Monitoring B with Renishaw OMP 60 - Program memory 8 MB - Mayfran Cleansweep chip conveyor - Paper band filter - Signal light - Additional workspace lighting

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (max.): 12,000 rpm, This 3-axis Mazak VC PRIMOS 400S was manufactured in 2016. This vertical machining center features a table size of 1500 x 670mm, a maximum load capacity of 1300kg, and a spindle speed of 20,000rpm. It includes a tool magazine with 20 places and 2 pallets. Ideal for precision machining, buy this Mazak VC PRIMOS 400S vertical machining center. Contact us for further details regarding this vertical machining center. Machine Benefits Technical Machine Benefits • Rapid feed x-y-z 60 m/min Hfjdpjyi El Nofx Aadoc • Table size 600 x 400 mm • Tool magazine 14 positions/ tool shank bt-30 accessories/chip conveyor

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 415 mm, controller manufacturer: BROTHER, total height: 2,360 mm, table load: 200 kg, overall weight: 4,600 kg, spindle speed (max.): 12,000 rpm, This Brother TC 32B Vertical Machining Center was built in Japan in 2007. Equipped with a Brother control unit, this machine incorporates 3 + 1 axis and a rotary table. Its BT30 spindle can operate with a speed up to 12000 rpm. Additional equipment • chip conveyor • remote flyer • Kitagawa rotary plate Machine Benefits Technical Machine Benefits • 3 + 1 axis • Toolholders: random 26 positions • Fast forwards: 70-70-70 m/min • Pallets: 2 / 600 x 425 Dimensions Hjdpjyi Ehksfx Aadjfc Machine Depth 3700 mm

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 505 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, overall weight: 3,750 kg, spindle speed (max.): 36,000 rpm, number of axes: 5, This 5s FEHLMANN PICOMAX 60-HSC vertical machining centre was manufactured in 2008. It features a table size of 920x380 mm and offers impressive spindle speeds of up to 36,000 rpm. With a robust weight of 3750 kg, this machine is designed for precision and durability. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 60-HSC machine we have for sale. Contact us for further details. Hodpfx Asyizpdjadsfc • Table size: 920x380 mm Technical Specification Taper Size HSK 50

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, nominal power (apparent): 24 kVA, 2 PCS CNC CHIRON DZ15 W MAGNUM HS Drilling capacity in steel: 60: 2 x 6 36 mm (with indexable insert drill) Guides: with long-life grease lubrication Speed range: 20-12,000 rpm CNC control: SIEMENS 840D Distance between spindles on X-axis: 250 mm Hfjdpfxoyiyyue Aadoc X-axis: 300 mm Y-axis: 400 mm Z-axis: 425 mm (with variable tool change plan) Rapid traverse: 60 m/min on X, Y, and Z axes Main spindle drive: 1 unit with 2 AC motors Power at 100% continuous operation: 9.5 kW Power at 15% intermittent operation: 14.0 kW

Condition: like new (used), Year of construction: 2021, AUTOMATIC PALLET CHANGER Usable pallet dimensions mm2 x 650 x 400 Maximum permitted load on pallet kg2 x 250 Hfsdeyiu Duopfx Aadsc TRAVELS AND FEEDS X axis mm 520 Y axis mm 400 Z axis mm 330 Rapid traverse X, Y mm/min 56,000 Rapid traverse Z mm/min 56,000 Working feedrate mm/min 1 ÷ 20,000 DIRECT DRIVE MOTOR SPINDLE Tool taper and shank BT30 Spindle speed rpm 12,000 Spindle motor power 30 min/continuous kW 7.5/5.5 TOOL MAGAZINE Umbrella-type tool magazine capacity 24 Maximum tool diameter mm 80/100 Maximum tool length mm 200 Fixed position tool selection

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, controller manufacturer: Siemens, controller model: 840Dsl, General Speed: 10,500 rpm Max. power: 23.3 kW Tool holder: SK 40 Hsdeyimyuspfx Aadjfc Travel X: 550 mm Travel Y: 400 mm Travel Z: 425 mm Tool changer: 20 stations

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,069 h, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 200 kg, overall weight: 4,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,000 W, tool weight: 6,000 g, This 5s DMG DECKEL MAHO DMU 50 was manufactured in 2005. It features a HEIDENHAIN iTNC 530 CNC control, with a spindle speed range of 20 – 10,000 rpm and a tool magazine capacity of 16 pockets. The machine offers a maximum table load of approximately 200 kg and a rapid traverse of 24–30 m/min. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 50 vertical machining centre. Contact us for further details. • Table clamping area: approx. 500 × 380 mm • Swivel axis (B): about −10°/−5° to +110° • Rotary axis (C): 360° continuous Hjdpfeyifhbox Aadsfc • Tool magazine capacity: 16 pockets • Max. tool diameter: about 80 mm (130 mm with free adjacent pocket) • Max. tool length: approx. 300 mm • Rapid traverse (X/Y/Z): 24–30 m/min (depending on version)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, nominal power (apparent): 11 kVA, number of spindles: 3, input voltage: 380 V, CNC BROTHER TC - 31A 3 AXIS ROTARY TABLE WITH HYDRAULIC UNIT WITHOUT VAPOR FILTRATION SYSTEM Hfodpfxjyh Rp Ij Aadoc

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, number of spindles: 3, number of slots in tool magazine: 21, input voltage: 380 V, CNC TC-S2C Hfjdjyh Rmyspfx Aadoc 2006 3 AXES SIMPLE TABLE WITHOUT HYDRAULIC STATION WITHOUT VAPOR RECOVERY SYSTEM

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, number of spindles: 4, CNC SPEDIO S300X1/500X1/700X1 4 AXES DOUBLE ROTARY TABLE WITH HYDRAULIC STATION WITHOUT VAPOR FILTRATION SYSTEM Hsdpfx Asyh Rhqjadofc 3 UNITS

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, number of spindles: 4, number of slots in tool magazine: 21, input voltage: 380 V, CNC BROTHER MODEL TC-S2DN-O YEAR 2012 AND 2013 2 UNITS FROM 2012 1 UNIT FROM 2013 3 AXES SIMPLE TABLE WITH HYDRAULIC STATION WITH VAPOR RECOVERY SYSTEM Hsdpfsyh Rd Sex Aadofc

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, nominal power (apparent): 16 kVA, number of spindles: 4, number of slots in tool magazine: 21, CNC BROTHER model TC-32B QT 2006 Hedjyh Rbdopfx Aadefc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, rotational speed (max.): 10,000 rpm, number of spindles: 4, input voltage: 380 V, 1 pc. CNC BROTHER SPEEDIO MOD 650X1, year of manufacture 2017 Hfjdpfxoyh Rame Aadjc 1 pc. CNC BROTHER SPEEDIO MOD 650X1, year of manufacture 2016 4 axes Double rotary table With hydraulic station Without vapor extraction/filtration system

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, nominal power (apparent): 9 kVA, number of spindles: 3, input voltage: 380 V, CNC TC - S2A-0 IN VERY GOOD CONDITION 3 AXES STANDARD TABLE WITHOUT HYDRAULIC UNIT Hfedoyh N S Ijpfx Aadoc WITHOUT VAPOR RECOVERY SYSTEM

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, nominal power (apparent): 9 kVA, overall weight: 1,800 kg, number of spindles: 4, number of slots in tool magazine: 21, input voltage: 380 V, CNC BROTHER model TC-S2A 1 unit manufactured in 1999 1 unit manufactured in 2008 3 axes Simple table Without hydraulic station Without vapor recovery system Hfodpfxoyh N Rws Aadsc

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, nominal power (apparent): 10 kVA, rotational speed (max.): 16,000 rpm, overall weight: 2,400 kg, number of spindles: 4, number of slots in tool magazine: 21, 2 PCS CNC BROTHER SPEDIO MOD S700X1 Hedeyh N N Topfx Aadofc YEAR OF MANUFACTURE 2018

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,934 h, travel distance X-axis: 406 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 254 mm, controller manufacturer: HAAS, spindle speed (max.): 40,000 rpm, number of axes: 3, This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details. • Spindle: • IBAG Switzerland spindle • Water-cooled • Tool holder: HSK E32 Hodpfx Ajyhflteadefc • Tool changer: • Type: Automatic Tool Changer (ATC) • Capacity: 18 tools • Working hours (from control): • Servo time: 9,158 h • Motion time: 4,984 h • Spindle time: 5,934 h • Idle time: 0:44 h • Electrical data: • Voltage: 360–480 V • Phase: 3 • Frequency: 50/60 Hz • Full load current: 20 A • Largest load: 35 A • Short-circuit interrupting capacity: 10,000 A Technical Specification Taper Size HSK 32

Condition: good (used), Year of construction: 1992, operating hours: 30,000 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Okuma OSP5020M, total height: 2,700 mm, total length: 2,500 mm, total width: 2,500 mm, rotational speed (max.): 8,000 rpm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 10,000 h, coolant supply: 5 bar, number of slots in tool magazine: 18, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, CNC Milling Machine Okuma VR40 Year of manufacture: approx. 1992 3 axes, X = 560 mm, Y = 450 mm, Z = 450 mm travel. Spindle speed: 8,000 rpm, SK40 Spindle hours: approx. 10,000 h Coolant pump with approx. 5 bar coolant pressure Coolant with six nozzles around the spindle Tool magazine with 18 stations Various tool holders with assorted tools The machine originally operated in a sheltered workshop and has also only been used occasionally by us. It is in very good condition, and both the axes and the spindle run quietly and smoothly. Hjdpjyha R Refx Aadefc Accuracy is very good. The machine is available for inspection and demonstration under power at our facility. It is sold with three machine vises and all accessories shown in the photos. Complete documentation is available. Two tool stations are defective as the plastic grippers are broken. They can be replaced with new grippers. Normally, the machine has 20 tool stations. This has never been an issue for us over the years.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Siemens 840 control, pallet changer table, 20-position tool changer, through-spindle coolant (IKZ), Knoll coolant system. Hfodpfx Aoyg H U Hjadjc

Condition: reconditioned (used), Year of construction: 2004, Used 3-axis machining center Mazak Nexus 410A Year of manufacture: 2004 Control: Mazatrol 640M Worktable: Table size: 900 x 410 mm Max. table load: 500 kg T-slots: 3 Distance between T-slots: 125 mm Slot width: 18 mm Travel paths: X-axis: 560 mm Hjdjyg Hx Sspfx Aadsfc Y-axis: 410 mm Z-axis: 510 mm Rapid traverse: X/Y/Z axis: 36 m/min Feed rate: 1 – 8,000 mm/min Working spindle: Speed range: 35 - 12,000 rpm Main drive power: 18.5 kW Tool magazine: Number of tool stations: 30 Max. tool diameter: 80 mm - with adjacent positions free: 125 mm Max. tool length: 350 mm Max. tool weight: 8 kg Machine data: Total connected load: 33.1 kVA Machine weight: approx. 5,100 kg Machine dimensions (L x W x H): approx. 2.10 x 2.60 x 2.80 m STANDARD ACCESSORIES: Complete coolant system - Flood coolant - Through-spindle coolant Coolant and chip guard Chip and coolant protection by fully enclosed working area Work area lighting Chip conveyor, ejection to the side The machine can be inspected by appointment in Willingshausen. We can load it. Technical data, accessories and description of the machine are non-binding.