Werkzeugmaschinen Nord OHG

Condition: ready for operation (used), Year of construction: 1997, operating hours: 36,111 h, travel distance X-axis: 4,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: LE 430 CA, overall weight: 16,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 15,000 W, number of axes: 4, This 4-axis Matec 30 HV CNC was manufactured in 1997. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 600 mm, and Z-axis travel of 800 mm. The machine is equipped with a powerful 10 kW drive and a tool changer with 36 magazine positions. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV CNC vertical machining centre we have for sale. Contact us for further details. • Axes travel and speeds • X-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Y-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Z-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Spindle • Drive power (100% duty cycle): 10 kW from 2000 rpm; torque 48 Nm up to 2000 rpm; approx. 6 Nm at 15,000 rpm (M = P*9550/n) • Drive power (25% duty cycle): 15 kW from 2000 rpm; torque 72 Nm up to 2000 rpm; approx. 10 Nm at 15,000 rpm (M = P*9550/n) • Coolant: Internal coolant 20 bar • Head: Swivel head with 1° indexing increments • Tooling • Tool changer: 36 positions • Max. tool diameter: 130 mm • Work area and clamping • Max. workpiece length for double-sided end machining: X = 3500 mm − 2 × max. tool length Dcedpfx Agjyzq A So Rsf • Clamping surface: X = 4500 mm (clamping plate length) • Y = 650 mm; 7 T-slots, 125 mm spacing • Electrical connection: Total connected load 42 kVA

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,500 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 20,000 rpm, spindle motor power: 30,000 W, tool weight: 4,000 g, number of axes: 5, This 5-axis PROMAC ZEPHYR VT 2.5 XL was manufactured in 2015. It features an impressive X-axis travel of 2500 mm, Y-axis travel of 2200 mm, and Z-axis travel of 1100 mm. The machine is equipped with a HEIDENHAIN CNC control and has a maximum spindle speed of 20,000 rpm. If you are looking to get high-quality machining capabilities, consider the PROMAC ZEPHYR VT 2.5 XL vertical machining centre we have for sale. Contact us for further details. • B-axis travel: -110° to +110° • C-axis travel: -200° to +200° • Power-on hours: 20,330 • Spindle hours: 9,902 • Table dimensions: 2000 x 1200 mm • T-slots: 18 mm • Rapid feed (X/Y/Z): 40 m/min • Rapid feed (B/C): 10 rpm/min • Spindle type: Electro-spindle • Spindle torque: 80 Nm • Tool interface: HSK-A63 • Tool magazine capacity: 32 positions • Max tool length: 300 mm Dodpfsyzpv Dsx Ag Rocf

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 720 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 2,500 kg, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,100 mm Travel Y-axis: 720 mm Travel Z-axis: 600 mm Table dimensions: 2,800 x 650 mm Workpiece weight max.: 2,500 kg Spindle speed: 30 - 8,000 rpm Spindle drive power: 16.25 kW Spindle torque: 102 Nm Tool holder: SK40 Tool magazine capacity: 30 MACHINE DETAILS Dcjdeyzn Irepfx Ag Rsf Control: HEIDENHAIN TNC430 Note: Dismantling and loading can be offered by the seller at an additional charge.

Condition: ready for operation (used), Year of construction: 1997, Immediately available from toolmaking: CNC Vertical Machining Center Hedelius Model BC 40 D/20 Year of manufacture 1997 Siemens Sinumerik 840 D 4th axis Table 2 x 1100 x 420 mm Pendulum machining possible Table load 500 kg Travel X/Y/Z 1700/400/400 mm SK 40 20-position tool magazine Spindle speeds 30 – 6,000 rpm Rapid traverse on all axes 30 m/min Dcodpfxjyzm Scj Ag Rof Drive power 20 kW Weight 7 t Price: EUR 9,500 excl. VAT, ex location

Condition: used, Year of construction: 2021, functionality: fully functional, Control: FANUC 0i x-travel: 900 mm y-travel: 460 mm z-travel: 520 mm Djdpfx Agsyyx His Rocf Table dimensions (LxW): 1.050 x 459 mm max. table load: 600 kg rapid travel x/y/z: 36 / 36 / 36 m/min max. spindle speed: 8.000 rpm Tool magazine for 30 + 1 tools chip conveyor Hand-held spray gun with coolant RENISHAW touch and spindle probe

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 2,600 mm, travel distance Y-axis: 870 mm, travel distance Z-axis: 760 mm, controller manufacturer: HEIDENHAIN, controller model: TNC530, spindle speed (max.): 6,000 rpm, number of axes: 3, This 3-axis DAH LIH MCV2600 was manufactured in 2006. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 870 mm, and Z-axis travel of 760 mm. The machine includes a robust table size of 2800 x 970 mm and a maximum speed of 6000 rpm. If you are looking to get high-quality machining capabilities, consider the DAH LIH MCV2600 vertical machining centre we have for sale. Contact us for further details. • Table size: 2800 x 970 mm • Spindle taper: BT50, geared head (gearbox) • Internal cooling: yes Dcsdpfx Aoyyl Iysg Rof • Usage: used partly during the day, not continuously Technical Specification Taper Size BT 50

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 161081, travel distance X-axis: 6,250 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 8 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, nominal power (apparent): 80 kVA, controller manufacturer: Siemens, controller model: 840C, table load: 15,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, spindle motor power: 6,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Manufacturer: Forest Model: V1 2500 BTC Machine type: Gantry type 3-axis milling machine Serial number: 161081 Year of last overhaul: 2000 CNC control: Siemens Sinumerik 840C Axes X-axis travel: 6250 mm Y-axis travel: 2560 mm Z-axis travel: 600 mm Spindle: DIN 69871 SK50 Maximum speed: 6000 min⁻¹ Spindle cooling: Liquid-cooled Maximum working feedrate: 8000 mm/min Tools and services Dcodpsyyaf Hsfx Ag Rof Tool magazine: 30 positions Lubrication: External oil mist (outside the spindle) Overall dimensions Floor space occupation: 11000 × 7800 mm

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Dcjdpeyx Ugvjfx Ag Ref Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: used, Year of construction: 2016, Machine Overview Manufacturer / Model: Hedelius Tiltenta 7 Magnum (T7-3200/1R) Machine Type: Travelling column machining centre Configuration: 5-axis CNC machining centre Control System: Heidenhain iTNC 530 Spindle & Performance Spindle Power: 22 kW / 117 Nm Speed Range: 50 – 12,000 rpm Tool Holder: SK40 Swivelling Range: -98° to +98° (continuous, NC-controlled) Travels X-Axis: 3,200 mm (vertical) / 2,630 mm (horizontal) Y-Axis: 750 mm Z-Axis: 695 mm (vertical) / 800 mm (horizontal) Table & Rotary Table Table Type: Fixed machining table with integrated NC rotary table Rotary Table Diameter: 750 mm Max Workpiece Weight: 800 kg T-Slots: 7 x 18 mm Tool Changer Tool Magazine: 50 positions Max Tool Weight: 5 kg Max Tool Length: 330 mm Max Tool Diameter: 75 mm (100 mm with adjacent pockets free) Tool Change Time (chip-to-chip): approx. 10.5 – 13.5 sec Feed Rates Rapid Feed Rate: up to 40 m/min (X, Y, Z) Drive System: Digital servo motors with ball screws Applications Suitable for machining steel, cast iron and general metal workpieces Ideal for 2D, 2.5D and 3D machining Used in machine construction, fixture building and automotive industry Coolant & Chip Handling Chip Conveyor: Integrated scraper conveyor Coolant Pump: 1 bar / 100 l/min Optional: High-pressure coolant system Dcodpfoyxl Idsx Ag Rjf Construction Machine Bed: Rigid, low-vibration grey cast iron design Guide System: Linear guideways Enclosure: Fully enclosed working area with safety glass

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VTC 760 was manufactured in 2020. It features an X-axis travel of 1740 mm, Y-axis travel of 760 mm, and Z-axis travel of 660 mm. The machine includes a spacious table size of 2300 x 760 mm and a maximum workpiece weight capacity of 1400 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VTC 760 vertical machining centre we have for sale. Contact us for further details. • Control: Smooth G Dedpfxsyxdtfo Ag Rocf • Table size: 2300 x 760 mm • Distance table to spindle nose: 180 mm • Max workpiece size: 4100 x 905 x 790 mm • Table surface: T-slots • Max workpiece weight: 1400 kg • Rapid feed (X/Y/Z): 42,000 mm/min • Coolant pressure: 18 bar (additional tank) Additional equipment • Fume extractor • Schunk vises • Zero-point clamping system • Nakanishi high-speed spindle (50,000 rpm) • Tooling sets with cabinets and benches Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,880 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 800 mm, nominal power (apparent): 40 kVA, controller model: Fanuc, overall weight: 16,000 kg, number of slots in tool magazine: 24, input voltage: 380 V, type of input current: three-phase, Type: Heavy-Duty CNC Vertical Machining Center Djdpfxjyw Uiuj Ag Rscf Model: VMC-1880 Year: 2008 Table size: approx. 2000×800 mm Spindle: BT 50 spindle taper Spindle speed: 6000-8000 rpm Spindle motor: 15-22 kW Tool changer: Chain-type ATC (20-24 tools) Control system: FANUC CNC control(0i-MC series) FANUC alpha servo drives Machine weight: 10,000-12,000 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 27,865 h, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis DECKEL MAHO DMF 220 Linear was manufactured in 2004. It features impressive travels of approximately 220 cm in the X-axis, 56 cm in the Y-axis, and 72 cm in the Z-axis. The machine has a maximum speed of around 18,000 rpm and includes a chip conveyor and coolant filter unit. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMF 220 Linear vertical machining centre we have for sale. Contact us for further details. • Connection values: 400V/50Hz • Swing door machining possible • Operating hours: 44,199 Additional equipment Dedpfx Aeyw Rapeg Rjcf • Chip conveyor BLECHTECHNIK DMF 220 (2003) • Coolant filter unit DMG

Condition: excellent (used), Year of construction: 2012, Data: Ibarmia gantry-type machining center (3 axes) XYZ travel: 3050 x 600 x 900 mm Spindle speed: 12,000 rpm Tool magazine: 60 positions, HSK 63 High-pressure coolant: 60 bar Tool measurement: Renishaw Dcsdpfxjywz H Hj Ag Rof Touch probe: Renishaw Coolant system / band filter Chip conveyor

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Hedelius C100 with full equipment: Through-spindle coolant (IKZ), 3D probe, laser tool measurement, HSK63 spindle 18,000 rpm, 40 tool magazine positions. X2500mm Y1000mm Z770mm. Enclosure with automatic roof. Heidenhain 530 control. Absolent extraction (maintenance-free). Dcodpoyww Slofx Ag Rof

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, travel distance X-axis: 2,000 mm, travel distance Y-axis: 450 mm, nominal power (apparent): 37 kVA, controller manufacturer: Sinumerik 840 D, overall weight: 7,000 kg, spindle speed (min.): 10,000 rpm, Equipment: chip conveyor, - SK 40 tool holder - The machine is currently idle. Dodpfsywpa Isx Ag Recf - The buffer battery is empty, which has caused the connection to the PLC to be interrupted. The machine can be inspected under power at any time.

Condition: excellent (used), Year of construction: 2001, Mazak 3-axis vertical machining center in very good condition. About 8500 spindle hours and was only used for light work (machining Aluminium). Machine can be inspected under power upon appointment. Immediately available for delivery. Including: High pressure pump - 15 bar cooling through spindle Chip conveyor FH 3D probe Control Mazatrol Fusion 640M Dodpjywhbkefx Ag Rocf Max spindle speed 10000 rpm X-Axis Movement 1740 mm Y-Axis Movement 760 mm Z-Axis Movement 660 mm Tool holder SK40 Capacity tool magazine 60 positions Table length 2000 mm Table width 760 mm Table load 1400 kg Machine weight 10500 kg Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 1988, x-travel 600 mm y-travel 400 mm z-travel 400 mm Spindle Speed 4.000 U/min. Dcsdpfx Agsyv N Hfo Ref table surface area 800 x 425 mm tool taper SK 40 feed 2.000 mm/min total power requirement 5 kW machine weight ab. 2.000 kg

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 7,200 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 5,500 W, tool weight: 3,000 g, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of approximately 7200 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine is equipped with a powerful 5.5 kW electrospindle and a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for further details. • Control system: MMI CNC control • Operating system: Windows OEM software • Number of controlled axes: 4 (maximum configurable axes: 5) • C-axis rotation: 180° (-90° / +90°) • Drive system: Servo motors Dedpfx Agjyv H Nkj Rocf • Axis control: CNC controlled • Spindle type: Electrospindle • Tool magazine capacity: 11 positions • Maximum tool diameter: 200 mm • Maximum tool length: 150 mm • Maximum X-axis feed speed: 80 m/min • Maximum Y-axis feed speed: 60 m/min • Maximum Z-axis feed speed: 40 m/min • Voltage: 400 V (tolerance ±10%) • Frequency: 50/60 Hz • Total power consumption: approx. 7.2 kVA • Maximum current: approx. 18 A • Compressed air pressure requirement: approx. 6 bar • Machine structure: Steel machine frame Technical Specification Taper Size ISO 30

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of high-quality components. FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control Dodpfx Aeyvvlusg Rscf - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 800 kg, controller model: HEIDENHAIN iTNC 530, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 6,000 mm Dcsdpfx Aoyvudvjg Rof Travel Y-axis: 800 mm Travel Z-axis: 600 mm Spindle mount: SK 50 Spindle speed: 20 – 9,000 rpm Torque: max. 165 Nm Table load capacity: 3,000 kg Workpiece weight: max. 800 kg MACHINE DETAILS Control: HEIDENHAIN iTNC 530 Main drive: 60 kW Machine weight: approx. 24 t

Condition: good (used), Year of construction: 2016, Posmill 2050, year of manufacture 2016, Heidenhain control, X/Y/Z travel 2050/1050/780 mm, 60-tool changer, spindle speed up to 12,000 rpm, HSK 63 tool holder, 3D infrared measuring probe MH, Blum laser tool measurement. Dcsdpfeyvqczox Ag Rjf

Condition: defective spare-parts repository (used), Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 2,800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 2,700 mm, feed length Y-axis: 520 mm, feed length Z-axis: 630 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik 810, total height: 2,800 mm, total length: 4,450 mm, total width: 2,850 mm, table width: 520 mm, table length: 1,200 mm, rotational speed (max.): 10,500 rpm, overall weight: 12,100 kg, spindle speed (max.): 10,500 rpm, spindle motor power: 36,000 W, spindle nose: SK50, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, We are offering this used Chiron FZ 28 L vertical machining center, year of manufacture 1996. Model: FZ 28 L Serial number: 137-28 Year of manufacture: 1996 Weight: 12,100 kg Number of driven axes: 3 X-axis: 2800 mm Y-axis: 520 mm Z-axis: 630 mm Dcedpfx Agjyvg Ake Rjf Table clamping surface: 1200 x 520 mm (two machine tables installed) Spindle speed: 0 - 10,500 rpm Power output: 36 kW Tool holder: SK50 Tool changer for 40 tools Automatic tool changer Feed / Rapid traverse: X 40 m/min - Y/Z 30 m/min Coolant system: available Chip conveyor: available Hydraulic clamping system: available Note: The machine has a technical defect on the Z-axis (further information on request). The machine is being sold in its current condition. Dismantling, collection and loading are to be carried out by the buyer. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC machining center Hedelius C50-1800 Control: Heidenhain iTNC 530 Year of manufacture: 2008 Internal machine no.: 6 Travel paths: X axis: 1,800 mm Dcjdjyvgxxjpfx Ag Ref Y axis: 510 mm Z axis: 480 mm Clamping area: 2x 1,000 x 510 mm Pendulum mode: 2 x 700 x 510 mm Spindle taper: SK 40 Tool magazine: 20 positions Celox spindle speed: 50 – 12,000 rpm Equipment - 3D Formingstar package - 3D Heidenhain measuring probe - Chip conveyor - Partition wall - LTA extraction system - Water tank, high-pressure pump 20 bar - Machine enclosure

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Dcodpfxeyuzg Hj Ag Rjf Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: used, Year of construction: 2001, travel distance X-axis: 2,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 850 mm, DAEWOO ACE V - 850 MACHINING CENTER CNC FANUC 18 - M TABLE SIZE: 2,000 mm x 800 mm Dsdpfx Asyup T Uog Recf TRAVEL: X: 2,000 mm Y: 820 mm Z: 850 mm DISTANCE SPINDLE NOSE - TABLE SURFACE: 200 - 1,030 mm SPINDLE SPEED: 6,000 RPM MAXIMUM PERMISSIBLE TABLE LOAD: 3,000 kg TOOL MAGAZINE CAPACITY: 40 positions TAPER: ISO 50 DIN 69871 CHIP CONVEYOR MACHINE COMPLETE WITH ALL DOCUMENTATION YEAR OF FIRST INSTALLATION: 2001 MACHINE IS IN EXCELLENT CONDITION