Riedlberger GmbH

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 1,300 mm, table length: 550 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II INFO was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II INFO vertical machining centre we have for sale. Contact us for further details. - Total Operating Time: 17,659 hours 12 minutes 03 seconds (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours 38 minutes 37 seconds- Automatic Machining Time: 5,877 hours 48 minutes 01 seconds- Operating Time / Power On Time: 26,902 hours 54 minutes 33 seconds- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection) Ksdpfxey T Hbze Agnelt

Condition: new, Four-shaft shredder in very good condition with only 1200 operating hours. Year of manufacture: 1998 Kjdpfx Aoy T Hbuegnjlt 2 x 7.5 kW motors.

Condition: new, Year of construction: 2026, functionality: fully functional, Complete Set of Cloth Bags for Dust Extractors Dimensions: Ø500 × 850 mm Designed for the following dust extractor models: CORMAK FM300 CORMAK FM300S Kledpfx Agoy T Hbhenst The set includes two cloth bags: one upper bag with a mounting handle for installation on the top of the dust extractor, and one lower waste collection bag.

Condition: ready for operation (used), Year of construction: 2007, The Vecoplan VAZ 2000 M F-T is a robust heavy-duty single-shaft shredder manufactured in 2007 for industrial recycling applications. Suitable for plastics, films, wood, paper, cardboard, EBS/RDF, and commercial waste. Formerly part of a production line for LDPE PCR film bales; the production line was modernized and rebuilt in 2024. Successful tests for processing used pallets and cardboard cores have been carried out. The processing of wood and cardboard cores is technically unproblematic. The machine condition has been documented by Vecoplan, and the required spare parts for recommissioning have already been ordered. The sale is due to an internal department closure and the associated restructuring of operational processes. Rotor length approx. 2,000 mm, hydraulic ram for uniform material feeding, flipper/airspring counter-knife system for high operational reliability, Torque/HiTorc drive for high torque and energy-efficient operation, replaceable reversible cutting inserts, suitable for both pre-shredding and secondary shredding, final particle sizes depending on screen and material approx. 10–250 mm, high throughput capacity, and robust, maintenance-friendly design. Inspection possible by appointment. Klodoy T Hbbjpfx Agnst

Condition: good (used), mileage: 467,092 km, power: 412 kW (560.16 HP), first registration: 05/2013, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 8,500 kg, permissible axle load (axle 3): 8,500 kg, Year of construction: 2013, Equipment: AdBlue, air conditioning, crane, electric window regulation, fog lights, onboard computer, soot filter, = Additional Options and Accessories = - Air suspension - Particle filter - Sun visor - Power take-off (PTO) = Additional Information = Technical Information Number of cylinders: 9 Transmission Transmission: Opti Cruise, automatic Axle Configuration Suspension: Air suspension Front axle 1: Tire size: 385/65R22.5; Max. axle load: 9000 kg; Steerable; Tire tread depth left: 30%; Tire tread depth right: 30% Front axle 2: Tire size: 315/80R22.5; Dual tires; Max. axle load: 8500 kg; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% Kledpfoy T Ha Rjx Agnst Rear axle 1: Tire size: 315/80R22.5; Dual tires; Max. axle load: 8500 kg; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% Rear axle 2: Tire size: 385/65R22.5; Max. axle load: 7000 kg; Steerable; Tire tread depth left: 30%; Tire tread depth right: 30% Weights Unladen weight: 17,800 kg Payload: 15,199 kg GVW: 32,999 kg Functional Crane: HIAB 244 K5, behind the cab Condition Technical condition: good Optical condition: good

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Equipment: documentation/manual,

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, turning length: 250 mm, turning diameter: 150 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 60 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 285 mm, spindle motor power: 7,500 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 25 m/min, rotational speed (min.): 60 rpm, rotational speed (max.): 6,000 rpm, swing diameter over cross slide: 150 mm, turning diameter over bed slide: 250 mm, type of input current: three-phase, bar passage: 45 mm, chuck outer diameter: 203 mm, spindle nose: A2-5, Equipment: documentation/manual, Weight: approx. 4,000 kg Dimensions: approx. 2000 × 1700 × 2000 mm Ksdpey T Hakefx Agnolt

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 535.3 kW (727.80 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,297 kg, input voltage: 400 V, total width: 2,160 mm, total length: 6,200 mm, total height: 2,660 mm, warranty duration: 6 months, Aircooled chiller YORK YGT550HE 535.3 KW Cooling capacity: 535.3 kW / 152.2 tons (12/7 — 35°C) Year of manufacture: 2024 Options: Leak detector Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer CSH9663-160Y-40D (screw, inverter) + 1 pcs. Bitzer CSH9663-160Y-40D (screw) Klsdpsy T Hadjfx Agnot Type of refrigerant: R1234ze Number of fans: 10 pcs. (EC-fans) Dimensions: 6.2x2.16x2.66 m. Weight: 6297kg. Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, “FED” Drum Coater Type Crumb breader Kedpfxsy T E U Te Agnjlt for dry coatings all stainless steel belt width 400 mm adjustable speed min. 300 gr coating material adjustable angle fom 0 to 8° overall dimensions (L x W x H) : ± 4.400 x 1.450 x 1.800 mm infeed belt belt width 300 mm Elevating spiral screw

Year of construction: 2009, condition: used, Operational unit. Ask for additional details! Ksdpoy T E Uyefx Agnelt

Condition: new, Year of construction: 2026, functionality: fully functional, Complete Set of 20 Foil Waste Bags for Dust Extractors Bag dimensions: 800 × 1200 mm Designed for CORMAK dust extraction systems: FM300, Klodpfx Aey T E Umjgnst FM300S, FM300SA, FM500,

Condition: excellent (used), functionality: fully functional, Throughfeed band saw for cutting side pieces. Equipped with 6 chain strands with feed dogs. Feed length approx. 1,700 mm. 10 length stops. Saw motor 4.4 kW. Chain spacing: 750 - 600 - 1000 - 1000 - 1000 mm. Kledpfx Agsy T E T Njnjt

Year of construction: 2015, operating hours: 35 h, condition: ready for operation (used), functionality: fully functional, Red Rhino 7000 2015 year Only 35 working hours!!! 4700 hours on engine Deutz TD 2.9 75 HPO Inlet 700x400 mm Klsdpfx Aoy T E Tiognst CSS range from 0-25 to 0-100 mm Capacity 25-45 tons per hour depend on material Weight 11 tons Fitted with side conveyor Machine in great working condition, ready for work like NEW

Condition: good (used), Year of construction: 2004, functionality: fully functional, Colchester CNC lathe Model Tornado T 220 S Year : 2004 Turning lenght : 540 mm. Turning diameter : 290 mm. Sving over bed : 510 mm. Klsdpfx Agoy T E Tconjt RPM : 3500 Spindle borer : 66 mm. Tools in revolver :12 stk. Control : FANUC 21i - TB Chuck - Toolholder - Interface RS-232 C - Coolant

Condition: excellent (used), lifting height: 16,400 mm, Year of construction: 2019, operating hours: 1,354 h, Empty weight: 2.800 kg Lifting capacity: 3.150 kg Dimensions of cargo space: 315 x 75 x 195 cm CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: NL Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Hoeflon C6 * 2019 * 1,354 operating hours Kodpfjy T E S Eex Agnolt * Diesel (Yanmar) and 230 Volt drive * Equipped with all options * 16.4 meter working height * 14.4 meter horizontal reach * 3,150 kg lifting capacity * 2,800 kg own weight * Remote Control * Articulated outriggers * Including documents

Condition: excellent (used), functionality: fully functional, mileage: 456,000 km, fuel type: diesel, wheelbase: 3,800 mm, fuel tank capacity: 1,200 l, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Year of construction: 2022, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, blind spot assist, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, start-stop system, tachograph, tire pressure monitoring, traction control, trailer coupling, Iveco S-Way 570 FP 2022 Full air suspension Intarder Static climate control Full LED headlights Klodpfxsy T E Sxe Agnjt Dual fuel tank New injectors, with Iveco invoice.

Condition: used, Year of construction: 2000, Kellenberger 600 U cylindrical grinding machine Condition: Used Year of manufacture: 2000 Technical data: Table: Ksdpfx Asy T E Rzjgnjlt Distance between centers: 600 mm Travel: 900 mm Travel per handwheel revolution, coarse/fine: 20 / 2.5 mm Travel per division on the handwheel: 0.05 mm Speed, hydraulically continuously variable: 0.02 - 6 m/min Reversal travel, minimum: 2.5 mm Dwell time during reversal, continuously variable: 0 - 5 sec Swiveling range: 11 degrees Cross slide: Travel with feed handwheel in fine or coarse mode: 220 mm Travel per handwheel revolution, coarse/fine: 8 / 1 mm/ø Division on the handwheel: 5 µm/ø Division with micrometer adjustment: 1 µm/ø Rapid traverse, hydraulically: 40 mm Feed, hydraulically: 0.95 mm/ø Form grinding: Feed rate: 0.25 - 25 µm/sec Surface grinding: Feed increments per table reversal: 130 µm/ø Grinding spindle head: Grinding wheel for external cylindrical grinding: 400 x 50 x 127 mm

Condition: like new (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Estimated value including equipment: 18,000 - 20,000 euros. * 4-axis machine. * Fully independent tailstock, programmable in motion along the Z-axis and clamping via M-codes. * 12-station turret, all motorized. * C-axis. * Y-axis. * Integrated main spindle motor: 18.5 / 22 KW. * Motorized tool motor: 5.5 kW. * Starting motor torque: 620 N/M. * Integrated motor, no belts or gears. * Main spindle size: A2-8. * Tailstock with MT5 Morse taper. * Bar capacity: 75 mm. * Kitagawa B-210 chuck. Kjdjy T E Nwjpfx Agnjlt * Prism-type guides on all axes. * Main spindle speed: 4,200 rpm. * Motorized tool speed: 4,000 rpm. * Swing diameter: 520 mm. * Machinable diameter: 380 mm. * Machinable length: 1050 mm. * Oil cooler for the spindle. * Communication ports via USB, PCMCIA card, and RS 232. * Automatic torque and tool load control. * IGF OSP P200-L conversational programming system. * Automatic force control and tool consumption monitor. * Parameterized automatic tool collision prevention system. * Tool life management and monitoring system. * Rapid traverse speed: 20 and 25 m/min on the X and Z axes. * Turret indexing and change time: 0.2 seconds. * Renishaw automatic tool measurement arm. * Communication ports via USB, PCMCIA card, and RS 232. * Double pedal for opening and closing the main chuck and tailstock. * Lateral chip conveyor, clamshell type. * Complete set of static tool holders for external and internal operations. * Complete set of motorized axial and radial tool holders. * Electrical transformer. * Documentation, parts list, electrical diagrams, programming, and operating manual. * Weight: 6,200 kg. * Machine is currently in operation. * Immediate delivery, subject to immediate sale.

Condition: excellent (used), Year of construction: 1997, Stack height, feeder: 1500 mm Stack height, outfeed: 1500 mm Production speed: 7000 sheets/hour Machine is still in production, well-maintained, and immediately available Kljdpfxey T E Nkj Agnot with documentation.

Condition: used, functionality: fully functional, machine/vehicle number: NM0KCXTP6KRG99719, mileage: 106,977 km, power: 367.75 kW (500.00 HP), first registration: 06/2024, fuel type: diesel, empty load weight: 8,993 kg, maximum load weight: 19,000 kg, overall weight: 44,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 08/2026, fuel: diesel, brakes: engine braking, color: black, driver cabin: sleeper cab, gearing type: automatic, number of gears: 16, emission class: euro6, number of beds: 2, total length: 3,600 mm, total width: 2,540 mm, total height: 3,917 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 12,600 kg, Year of construction: 2024, operating hours: 2,396 h, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, blind spot assist, central locking, cruise control, electronic stability program (ESP), fog lights, fridge, lane keeping assist, navigation system, onboard computer, parking heater, power mirror, seat heater, second fuel tank, spoiler, start-stop system, tachograph, We offer a leasing option with a minimum term of 36 months, ensuring stability and continuity in the long term. The monthly lease price is €2,000 excluding VAT, which provides a transparent and clear cost structure. Kledpfx Asy T E Ndjgnet In addition, a maintenance contract is included, so you don't have to worry about service or additional costs. You can enjoy a hassle-free and professional solution, where quality and reliability are paramount.

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Ksdpfx Aoy T E I Hognjlt Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: new, Year of construction: 2026, CORMAK LUP10T 10T 400V Log Splitter The compact vertical hydraulic CORMAK LUP10T is a new addition to the range, designed for efficient splitting of firewood and heating wood. The machine offers a splitting force of 10 tons, a 4 kW motor, and 400 V power supply, making it ideal for working with logs of various diameters and lengths. 🟠 Technical Specifications Model: CORMAK LUP10T Type: Vertical hydraulic log splitter Splitting force: approx. 10 tons Power supply: 400 V Motor power: 4 kW Maximum height: 1700 mm Minimum height: 1300 mm Width: 630 mm Depth: 900 mm Wedge depth: 180 mm Maximum log length: 650 mm Minimum log length: 150 mm Maximum log diameter: 450 mm Minimum log diameter: 80 mm Wheels: Rubber wheels Weight: 153 kg 10 tons of splitting force in a compact design — more powerful than typical 8T splitters while still easy to store and transport. 🔴 High Power in a Compact Design The biggest advantage of the CORMAK LUP10T is the combination of high splitting force and compact construction. The splitter features an adjustable working height ranging from 1300 to 1700 mm and base dimensions of 630 × 900 mm, making it easier to position, store, and transport. Despite offering greater force than standard 8-ton models, the design remains compact and user-friendly. Key Advantages ➡️ Approx. 10 tons of splitting force: efficient splitting of larger and harder logs ➡️ Compact design: easier storage and comfortable operation in limited spaces ➡️ 4 kW motor: stable performance when working with demanding materials ➡️ 400 V power supply: well suited for more intensive workshop and farm use ➡️ Maximum log diameter of 450 mm: capable of handling large firewood logs ➡️ Maximum log length of 650 mm: convenient preparation of standard fireplace and heating wood ➡️ Rubber transport wheels: easier machine mobility Klodpfx Agjy T E Iyonot ➡️ Weight of 153 kg: high stability during operation Choose greater power in a compact form. Select the CORMAK LUP10T and prepare wood more conveniently, efficiently, and with less effort. Benefits of Using the Log Splitter ➡️ Approx. 10 tons of splitting force: effective splitting of larger and harder logs ➡️ 4 kW motor: stable operation with demanding wood types ➡️ 400 V power supply: an excellent solution for intensive work on farms, in workshops, or around the home ➡️ Maximum log diameter of 450 mm: suitable for processing large pieces of firewood ➡️ Maximum log length of 650 mm: convenient preparation of wood for fireplaces, stoves, or boilers ➡️ Compact construction: easier storage and comfortable use in limited spaces ➡️ Rubber transport wheels: smoother repositioning of the machine in the workplace ➡️ Weight of 153 kg: excellent stability while splitting wood ➡️ Less effort than using an axe: more comfortable firewood preparation without heavy physical strain Choose high power in a compact form. Select the CORMAK LUP10T and prepare wood faster, more comfortably, and with less effort.

Condition: good (used), Year of construction: 2003, feed length X-axis: 3,500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,250 mm, total length: 7,200 mm, total height: 5,300 mm, table width: 1,800 mm, total width: 6,800 mm, table length: 2,200 mm, workpiece weight (max.): 12,000 kg, Table type boring mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Make: TOS VARNSDORF Type: WHN13CNC Control: HeidenHain TNC430 Year: 2003 1e owner machine ca 16.000 Spil hours Chip conveyor Under power  X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 2800Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Feed rate W-Axis: 10000mm/min. Number of controlled axis:5 Length: 7200mm Width: 6800mm Height: 5300mm Klsdpey T E Itsfx Agnjt Weight: 36850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 202,439 km, power: 390 kW (530.25 HP), first registration: 01/2024, fuel type: diesel, tire size: 386/65 R22.5, axle configuration: 6x2, wheelbase: 31,000 mm, fuel: diesel, fuel tank capacity: 700 l, brakes: intarder, color: blue, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2024, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, parking heater, = Additional Options and Accessories = - Adaptive cruise control - Alarm system - Aluminum fuel tank - DAB radio - Differential lock - High beam headlights - Tilting hydraulics - Air-suspended seats - Air horn - Radio/CD player Kljdpfx Asy T E Imsgnjt - Sun visor - Lane keeping assist - Auxiliary heater - Windshield - Power take-off (PTO) = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: 16-speed, manual Axle Configuration Axle brand: Michelin Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 386/65 R22.5; Max. axle load: 8000 kg; Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 1: Tire size: 315/70 R22.5; Max. axle load: 11,500 kg Rear axle 2: Tire size: 315/60 R22.5; Dual tires; Lift axle; Max. axle load: 7,500 kg Weights Unladen weight: 9,441 kg Payload: 17,559 kg GVW: 27,000 kg Maintenance, History, and Condition APK (Technical Inspection): New TÜV (German Technical Inspection) upon delivery Technical condition: very good Optical condition: very good Financial Information Price: On request Identification License plate: 16-BXF-1 Additional Information Please contact Maurits Van Giessen for further information.

Condition: good (used), mileage: 725,491 km, power: 427 kW (580.56 HP), first registration: 05/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 3,100 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2016, Equipment: AdBlue, central locking, cruise control, electric window regulation, onboard computer, parking heater, retarder, soot filter, = Additional Options and Accessories = - Heated mirrors - Cab - Tilting hydraulics - Air suspension - Particle filter - Auxiliary heater - Power Take-Off (PTO) = Notes = Scania R580 6x4 - PTO/Hydraulic - Retarder - Custom interior - Full air Model Year: 20-5-2016 Mileage: 725491 YS2R6X40005425689 3.10 wheelbase Hydraulic Retarder Special interior Full air = Further Information = Technical Information Number of cylinders: 8 Transmission Gearbox: Opti Cruise, automatic Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 8000 kg; Steered; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 1: Tire size: 315/80R22.5; Dual tires; Max. axle load: 9500 kg; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% Rear axle 2: Tire size: 315/80R22.5; Dual tires; Max. axle load: 9500 kg; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% Weights Unladen weight: 10,770 kg Payload: 16,230 kg GVW: 27,000 kg Kodpfx Agsy T E Igenslt Condition Technical condition: good Optical condition: good