ATN GmbH

Condition: used, Year of construction: 2000, machine/vehicle number: 10990001153, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, Travel paths: X-axis: 1800 mm, Y-axis: 2000 mm, Z-axis: 1100 mm Tool holder: HSK 63 Table size: 1700 x 1400 mm max. table load: 5000 kg Kodpfxoycvvlj Ahzswt

Condition: ready for operation (used), Year of construction: 2014, operating hours: 38,800 h, functionality: fully functional, machine/vehicle number: 11415594804, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller model: Heidenhain iTNC 530, table load: 300 kg, TECHNICAL DETAILS Travel X-Axis: 500 mm Travel Y-Axis: 450 mm Travel Z-Axis: 400 mm Clamping surface: Ø 630 x 500 mm Swivel range: -5/+110 degrees Table load: 300 kg Speed: 10,000 rpm Ksdpfxoycuzte Ahzswt Spindle drive: 13 kW Tool magazine capacity: 60 Tool holder: SK 40 MACHINE DETAILS Control: Heidenhain iTNC 530 Operating hours Power-on hours: approx. 65,300 h Spindle hours: approx. 38,800 h Machine weight: 4,850 kg EQUIPMENT ECO Tower 60 by Lang NC swivel rotary table C+B axis 3D probe Renishaw Chip conveyor Paper belt filter coolant tank 600 l Internal coolant supply 20 bar Electronic handwheel Documentation

Condition: ready for operation (used), Year of construction: 2018, 5-AXIS Machining Centre Brand: DMG MORI Model: DMF DMU 50 3rd Year: 2018 (spindle hours: 4,900) Control: Siemens 840D CELOS Equipped with: Integrated rotary table dia. 600 x 500mm / 300kg Spindle 21 kW – 15,000 rpm Tool changer with 60 positions Probe TS 649 3D quickset Through-spindle coolant 40 bar Tool probe Coolant gun Chip conveyor Specifications: Table surface: 600 x 500 mm X-axis travel: 650 mm Y-axis travel: 520 mm Z-axis travel: 475 mm B-axis: -35/+110° C-axis: 360.000° Spindle speed: 20 - 15,000 rpm Spindle power: 21 kW Spindle taper: SK 40 Rapid traverse XYZ: 42 m/min Machine dimensions with conveyor: 3440 x 2850 x H 2750 mm Kwjdpfx Aheyb Drfjzot Approximate weight: 7,480 kg

Condition: ready for operation (used), Year of construction: 1999, Machine Model: DMU 50 eVolution (5-Axis Machining Center) Control: Heidenhain MillPlus (MillPlus Control) Axes: 5 (X, Y, Z, B, C) Machine Weight: approx. 5,000 – 5,100 kg Installation Dimensions (L × W × H): approx. 2,683 × 5,353 × 2,470 mm Total Power Requirement: ~ 38 – 40 kVA Working Area & Axes X-Axis Travel: 500 mm Y-Axis Travel: 420 mm Z-Axis Travel: 380 mm B-Axis (Swivel Range): ±180° C-Axis (Rotary Range): 360° Spindle Data Max. Speed: 20 – 18,000 rpm (infinitely variable) Kedpfxoyay Rzs Ahzjwt Spindle Drive: approx. 35 kW (40% duty cycle) / 25 kW (100% duty cycle) Torque: approx. 130 Nm (40% duty cycle) / 87 Nm (100% duty cycle) Tool Interface: SK 40 (standard) – HSK optionally available for certain models Table & Workpiece Table Size: ø 500 × 380 mm Max. Table Load: 200 kg T-Slots: 7 × 14 mm (H7) ⚙️ Tool Magazine Magazine Capacity: 32 tools Max. Tool Length: ~ 200 mm (depending on magazine configuration) Max. Tool Weight: ~ 6 kg Feeds / Rapid Traverse Working Feedrate: up to 20,000 mm/min Rapid Traverse X/Y/Z: up to 50 m/min

Condition: used, Year of construction: 2016, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2016 Control : Heidenhain TNC 640 Speed : 12000 rpm Kwsdpfx Asyad A Iehzst Movement X/Y/Z : 400/350/350 mm Spindle: Technology:Directdrive Speed:12.000 rpm Power (max.):13 kW Torque (max.):95 Nm Taper:SK40 NC-Swivelroundtable: B-Axis:-50°/+110° C-Axis:360° Clampingsurface:ø450 mm Tableloading (max.):200 kg In general: Toolmagazine:48 Stations Rapid travers in X/Y/Z:48 m/min Equipment/Accessory: Positionsensor:Direct Scales in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with filter and High-pressure, 30 bar Workpiecemeasurement:Touch probe, Heidenhain TS740 Toolmeasurement:Laser, Renishaw NC4 TX Setup operations:Electronic Handwheel Further Equipment:Spindlechiller Further Accessory:Misc. used Toolholder

Condition: good (used), Year of construction: 2010, operating hours: 54,500 h, functionality: fully functional, machine/vehicle number: 15435720734, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, controller manufacturer: Heidenhain 530, controller model: 530, spindle speed (max.): 14,000 rpm, operating hours of spindle: 12,000 h, Equipment: chip conveyor, Equipment DMU 70: with Erova 10-position changer Spindle 14,000 rpm Heidenhain 530 3D probe Heidenhain TS649 DMG Kodpeyab Rijfx Ahzswt 30 tools / SK 40 Simultaneous rotary table Barrier air Chip conveyor Handwheel Folding roof The LANG zero-point clamping system can be purchased at an additional cost.

Condition: excellent (used), Year of construction: 2013, operating hours: 37,750 h, functionality: fully functional, machine/vehicle number: 1217000076 3, travel distance X-axis: 1,130 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 710 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain 530, table load: 1,000 kg, rotary table diameter: 1,240 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 4,000 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 400 mm, tool diameter: 125 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMU 105 Monoblock 5-Axis Machining Center Spindle 18,000 rpm, at 24,687 hours a new spindle was installed. Current spindle hours: approx. 4,000 Heidenhain iTNC 530 HSCI 60-position SK40 tool magazine Paper band filter, high-pressure coolant 40 bar / 23 Blum tool measurement Kjdpjyabm Rsfx Ahzowt 3D probe Heidenhain TS649 DMG 3D Quickset expansion package Blum tool measurement Infrared probe Heidenhain TS 649 DMG Coolant ring nozzle Rinse gun with pump Air blast cooling through spindle center Application Tuning Cycle ATC Electronic handwheel iTNC 530 Operating mode 4 The sale price includes 150 SK40 tool holders. Machine is still powered and can be inspected at any time. Lang zero-point clamping plate can be purchased for an additional charge.

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Kwodpsx U U Hbofx Ahzjt Total power required : 17 [kVA] Supply voltage : 400 [V] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] More information available upon request.

Condition: ready for operation (used), Year of construction: 1997, CNC milling machine Deckel Maho DMU 50 T Control: Heidenhain TNC426 Spindle speed: 20-9000 rpm Feed rate X, Y, Z: 20-10000 mm/min Rapid traverse X, Y, Z: 12000 mm/min Working area X 500mm, Y 400mm, Z 400mm Tool holder: SK40 DIN 69871 Drawbar DIN 69872 Tool changer: 16 positions Max. tool projection length from spindle nose: 290mm Worktable: Manually rotatable and tiltable rotary table Dimensions: 700 x 500mm T-slots M14 Centering bore: 30mm Kwedex Taq Nspfx Ahzst Transport data: Weight: 3200kg Dimensions (length x width x height): 2.10 x 2.30 x 2.30m

Condition: used, Year of construction: 2006, operating hours: 37,654 h, functionality: fully functional, machine/vehicle number: 10915548924, spindle speed (max.): 18,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this used Deckel Maho DMU 50 eVo linear universal machining centre, year of manufacture 2006. The guides of the X, Y, and Z axes, as well as the ball screws, were completely replaced at the end of 2023. Geometrically, the machine is currently as good as new. If you have any questions or need further information, please feel free to send us a message or give us a call. Kwjdex Srp Uopfx Ahzst

Condition: like new (used), Year of construction: 2023, DMG CMX 50 Control unit: Siemens 840D sl X-axis travel: 500 mm Y-axis travel: 450 mm Z-axis travel: 400 mm Year of manufacture: 2023 Kwodex Sqyfepfx Ahzst Weight: 4,700 kg

Condition: excellent (used), Year of construction: 2006, HEIDENHAIN iTNC 530 control Working travels 550 x 400 x 360 mm Spindle taper HSK 63 Spindle speeds -20'000 rpm Tool magazine with 48 Pos. Swivel rotary table with B- + C-axis Roboter for workpiece loading EROWA ERS 3D-measuring tracer Misc. accessories Kwjdpex R Uxpjfx Ahzet MARCELS MASCHINEN CH

Condition: used, Year of construction: 2002, Manufacturer: DECKEL-MAHO, Model: DMU100T, Year of manufacture: 2002, Control system: Heidenhain iTNC 530, 5 axes (swivel head, NC rotary table), 32-position tool changer, tool holder SK40, spindle speed 10,000 rpm, chip conveyor, coolant unit by Schimpke, band filter by Interlith, type STB3/600HD, operating hours: 72,535; 28,209, tool monitoring system by Brankamp, 4 drawer cabinets/containers, 1 WTS roller shutter cabinet, contents: approx. 150 SK40 tool holders, clamping devices, measuring tools, thread taps, center drills, 1 HD vice, make: Allmatic LC 160-200, infrared measuring probe (in tool changer) Kwedpfxox R Edvj Ahzst +++ Attention: Machine is part of an online auction! +++

Condition: like new (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (min.): 9,000 rpm, spindle speed (max.): 9,000 rpm, operating hours of spindle: 2,000 h, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The machine is fully complete and ready for immediate use. Supplied with 25 tool holders. Software: Heidenhain 426/430. All manuals and documentation are complete. Ksdpsx Rqckjfx Ahzewt

Condition: excellent (used), Year of construction: 2013, 5-Axis Machining Center Mori Seiki NMV 1500 DCG HSC Year of manufacture: 2013 X-axis travel range: 420mm (longitudinal movement of spindle head) Y-axis travel range: 210mm (cross movement of slide) Kwsdpfsx Rpcvsx Ahzst Z-axis travel range: 400mm (vertical movement of spindle head) Distance from table surface to spindle nose: 100 - 500mm (horizontal table position) B-axis travel range: +160° to -180° C-axis rotation range: 360° Machine table dimensions: 250mm, max. workpiece weight: 50kg Spindle: Torque boost spindle 7.5/5.5kW (max. 12,000 rpm) Tool changer: Chain-type tool magazine with 61 slots (HSK-A40) Tool holder: HSK-A40 interface, including corresponding modifications to the tool magazine, with a 61-slot capacity Chip conveyor Direct position measurement system for feedback to the CNC, for maximum positioning accuracy in X, Y, and Z axes Mobile control unit for axis movement, portable operator panel with axis selection switch, speed resolution selector, handwheel, and emergency stop Machine operated with cutting oil and equipped with a Kraft & Bauer fire extinguishing system Control options: - Expansion of part program memory to 512 kB, with up to 1,000 storable part programs - Increase of memory capacity to 512 kB for larger part programs and storage of up to 1,000 part programs - Multiple optional program line skipping - 8-digit part program numbers - Expansion of part program numbers to 8 digits (instead of standard 4 digits) - Increase in the number of user macro variables to 600 - Additional 400 global user macro variables (#600–989) versus the standard (#100–188 and #500–539) - Interrupt-driven user macro function: allows interruption of the running program sequence via machine-side interrupt signal (e.g., on overload detection) to immediately execute a programmed user macro, then continue the part program at the original point - Optional line skipping (2 blocks, selectable via softkey) - Selective block skip function for individual, preselected program blocks during part program operation (total of 9 blocks, individually selectable with softkeys) - Command for inclined working surface - Fast Data Server incl. memory card - DS A1212 external M-codes (8x2) The machine is still in operation and can be inspected under power by prior arrangement in the Saarbrücken area. Technical data, accessories, and description are given without obligation. Sale is ex works without warranty or guarantee. The buyer is responsible for transport. Upon request, we are happy to assist with transport. Payment is due 100% in advance prior to shipping. Subject to prior sale.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours of spindle: 1,200 h, 1 unit CNC machining center C 12 U with 5-axis simultaneous Heidenhain iTNC 640 control Manufacturer: Hermle Year of manufacture: 2015 Technical specifications Working area: - Travel paths X-axis: 350 mm Y-axis: 440 mm Z-axis: 330 mm - Swivel range A-axis: +115° / -115° - Swivel range C-axis: 360° - Direct linear measuring system, resolution: 0.0001 mm - NC rotary/swivel table: 320 mm diameter - Table load capacity: 100 kg - A-axis rotation speed: 25 rpm - C-axis rotation speed: 40 rpm Main spindle drive: - Drive power (100% - 40% duty cycle): 17 - 25 kW - Torque (100% - 40% duty cycle): 54 - 80 Nm Ksdsx N Dt Hopfx Ahzewt - Spindle speed: 20 - 18,000 rpm - Spindle taper: HSK-63 Rapid traverse In X, Y, and Z-axes: 30 m/min Linear acceleration: 4 m/s² Tool changer: - Magazine capacity: 36 tools - Max. tool diameter: 80 mm - Chip-to-chip time as per VDI 2852: 4.5 sec Space requirements: 4.00 x 4.00 x 3.10 m Machine weight approx.: 7.5 t Equipment Clamping plate, approx. 65 HSK 63 tool holders, 2 machine vices, 1 three-jaw chuck, electronic handwheel, Heidenhain probe, Blum calibration pin, chip flushing gun, emulsion mist extraction, Blum tool breakage/tool measurement A1, tool setting device, kinematics suitcase, chip conveyor without IKZ (internal coolant supply) Delivery terms: ex stock, Bad Emstal Availability: available from January 2026, by arrangement; machine can be demonstrated under power Technical data subject to change without notice.

Condition: used, Year of construction: 2002, Technical Data: Travel X-axis: 1250 mm Travel Y-axis (cross): 880 mm Travel Z-axis (vertical): 800 mm Tool holder: SK50 Drive power: 44 kW Tool magazine: 60 stations NC rotary table, table size: 1250 x 1000 mm Max. rotation speed of table: 8.1 rpm Universal milling head: B-axis Spindle speed range: up to 10,000 rpm Control unit: iTNC 530 Total connected load: 81 kVA Max. tool diameter for 30/60 tool stations: 100 / 110 mm Max. tool length from spindle nose: without tool breakage monitoring: 450 mm with tool breakage monitoring: 390 mm Features: - Heidenhain iTNC 530 control - 5-axis - 60 tool stations - NC rotary table Kwjdpfxex Iry Ss Ahzet - Coolant system

Condition: good (used), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: documentation/manual, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Number of running hours : 9911 [h] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW TS27R tool probe x1 spindle cooling unit x1 parts catcher x1 coolant tank x1 unit for 6th face machining (gripping system not included) x29 tool holders type HSK40 BIG KAISER x10 collets type F37 SCHAUBLIN x1 washing gun x1 3-color status light x1 maintenance manual x1 electrical diagrams manual x1 operator's manual x1 programming manual Kwsdpfx Ajx Iiw Iehzet Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: excellent (used), Year of construction: 2004, operating hours: 7,987 h, functionality: fully functional, travel distance X-axis: 1,120 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: 160 is-MB, table width: 500 mm, table length: 500 mm, table load: 400 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 7,979 h, spindle motor power: 22,000 W, spindle nose: SK 40, number of slots in tool magazine: 30, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, high-speed machining center of Japanese construction with continuous 5-axis capability, complete with: remote handwheel, high-pressure coolant through spindle, chip conveyor, random tool changer, laser tool measurement system, wireless workpiece probe RENISHAW MP 10, FANUC high-speed package, network interface, serial interface, memory card Kodpsx H Tx Hefx Ahzowt

Condition: refurbished (used), Year of construction: 2003, operating hours: 47,000 h, functionality: fully functional, Manufacturer: Deckel Maho / DMG MORI Model: DMU 70 eVolution (extensively overhauled; new guideways, new motor spindle, new hoses, etc.) Year of manufacture: 2003 Serial number: 15035707964 Operating hours (as of 08/2025): Power-on hours: 100,115 h Cycle hours: 48,302 h Availability: from January 2026 Equipment and Accessories - CNC control: Heidenhain MillPlus V530 / 00m - Renishaw MP10 infrared probe - Motor spindle SK40, 18,000 rpm, operating mode 4 - Quick Set software for kinematic compensation - Blum laser system for tool measurement and tool breakage control - Tool magazine with 92 positions - Tebaron extraction/filter unit - ICS (internal coolant supply) through the spindle, 80 bar - Chip conveyor - Photos and videos available via MONTRASIO WhatsApp Business Maintenance, Servicing, and Upgrades (all carried out in 2025) - Annual maintenance by Maschinen- und Industrieservice ULRICH - Ongoing overhaul of individual components as part of normal wear - Y-card replaced - Y power module exchanged (new) - Mixer in the coolant system replaced with a brand-new mixer - 4-DO card A5-09A71 replaced - Complete overhaul of the motor spindle - GKT Z-axis completely overhauled - Guideways of all axes overhauled, including Y and Z-axis (brand-new guideways) - Coolant pump replaced by new pump - Connector on the high-pressure pump renewed (new) - Buffer battery replaced (new battery) - Lubrication hoses renewed (new hoses) - General maintenance performed by DMG MORI Direct Service in 2024 and 2025 (last service in 2025) - Monitor replaced (new) - Oil skimmer replaced Known Issues: Only age-related, visual or optical signs of use Application / History The machine will remain powered up and in production until calendar week 02/2026 Delivery calendar week 04/2026 Previously used at LIEBHERR Aerospace Kjdex H S D Ujpfx Ahzjwt Toolmaking machine – meticulously maintained high-precision machine with documented maintenance history, complete logbook, structured spare parts management, and regular spindle inspections (every six months) Reason for sale: Acquisition of a brand-new GROB 550 5-axis machining center

Condition: good (used), Year of construction: 2006, 1. TECHNICAL DATA Working area X axis: 400 mm Y axis: 450 mm Z-axis: 350 mm B-axis: +-110 ° C axis: 360 ° Working spindle Speed range: 100 - 42`000 rpm tool holder: HSK E 40 spindle power at 40 % ED: 13 spindle power at 100 % ED: 10 Torque at 60 % ED: 4,25 Torque at 100 % ED: 3,2 Lubrication: oil/air Feed rate Rapid traverse speed: Max. 40 m/min B axis: 150 rpm C axis: 250 rpm Axis acceleration, XYZ: Max. 1g (10 m/s2) B axis: 100 rad/s2 C axis: 300 rad/s2 Tool changer: 68-fold Kwedpfx Ahox H Ntaezot Chip to chip: 12.5 s Tool change time: 10,0 s Work table: 120 mm Max workpiece diameter that can still be rotated 360 °: 230 mm Max. Workpiece height: 350 mm Max. Workpiece weight: 25 kg Hfsbrjigrf Ie Icm Ener Control: Heidenhain iTNC 530 Weight: 5500 kg

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand HEIDENHAIN Main Drive Number of axis 5 Kwsdpfx Ahjx H A Nbjzst Movement X-Axis Movement 270 mm Z-Axis Movement 250 mm Y-Axis Movement 240 mm B-Axis Min 110 º C-Axis Movement 360 º This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Mikron / GF HPM 450 U WPC with Pallet Changer About the machine: High-precision 5-axis simultaneous milling machine with 7-position pallet changer (WPC). Excellent condition, extensive equipment! Very low spindle hours! Kwodpfxsx Hx Rhj Ahzjt Technical data: - Heidenhain ITNC 530 HSCI - X-axis: 600 mm - Y-axis: 450 mm - Z-axis: 450 mm - B-axis: +45° / -120° - C-axis: 360° - Spindle speed range: 20,000 rpm - Spindle drive: 23 / 30 kW - Torque: 91 Nm - Tool holder: HSK 63 - Pallet size: 280 x 280 mm - Max. pallet load: 150 kg - Number of tool magazine pockets: 60 - Max. tool diameter: 90 (130) mm - Max. tool length: 200 mm - Max. tool weight: 6 kg - Tool change time: 3 sec. - Feed force X-Y-Z: 5 kN - Rapid feed X-Y-Z: 22 m/min - Acceleration X-Y-Z: 5 m/s² - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 140 rpm Accessories: - 7 pallets, including 6 pallets with clamping devices (see photo) - Electronic handwheel - Infrared measuring probe - Laser tool measurement - Direct path measuring systems - APS Advanced Process System - ITC Intelligent Thermal Control - rConnect Live Remote Control (1 year) - KinematicsOpt - CT 60 tool magazine - DYNAFIX 7-position pallet changer - SIGMATEC 15 / 900 cbm/h oil mist extraction system - Tool blow-off device - Blowing air at the spindle carriage - Blowing air through the spindle center - Internal coolant supply 18–70 bar - Paper band filtration system - Chip conveyor - Spindle oil cooler Machine dimensions L x W x H: 6600 x 4000 x 2800 mm Weight: approx. 8,600 kg An inspection/test under power onsite is of course possible. We are not your average machine dealer – here, you will be advised by a CNC expert! We are happy to offer you transport, installation and setup, as well as commissioning and a machine training session, all performed by our own technicians. Everything from one source: Baumgärtner CNC GmbH & Co.KG is a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Deckel Maho DMU 50 EVO Linear with ITNC 530 Kodpox Hwhrjfx Ahzswt About the machine: Fast and flexible 5-axis simultaneous milling machine, in excellent condition. Fully equipped! Suitable for connection to automation systems! Technical specifications: - Control unit: Heidenhain ITNC 530 - Travel (X, Y, Z axes): 500/450/400 mm - Travel (B, C axes): 161.955/360° - Clamping surface, rotary table: 500 x 380 mm - Rapid traverse: X - 80 m/min, Y - 50 m/min, Z - 50 m/min, B - 40 rpm, C - 50 rpm - Spindle speed: 20–18,000 rpm - Tool holder: SK40 - Tool magazine with 60 positions - Network connectivity - Prepared for automation integration Accessories: - Internal coolant system with belt filter - Work area rinsing system - Heidenhain TS 649 probe - Coolant/air blast selection via M-code - Oil mist extraction unit - Rinsing pistol - Chip conveyor - Hand-held control unit Machine dimensions (L x W x H): 3800 x 3200 x 2800 mm Weight: approx. 6,500 kg Inspection and test run under power at our facility is, of course, possible. We are also pleased to offer transport, installation, and commissioning at your location. Everything from a single source: We at Baumgärtner CNC GmbH are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and those of other renowned manufacturers. We are there for you! From machine purchase, transport, and installation, through to commissioning and subsequent maintenance or repair work, you can count on us.

Condition: defective spare-parts repository (used), Year of construction: 2014, functionality: not functional, machine/vehicle number: CAM 143511P0510, overall weight: 450 kg, CNC Gantry Milling Machine VHF CAM 0510 Premium (Year 2014) Compact CNC gantry-type milling machine VHF CAM 0510 Premium from a family business, manufactured in 2014. The machine has been used for precise machining of metal parts and furniture fittings and is fully operational. Application area: – Milling and drilling of smaller workpieces and profiles Kwsdpex Hqcpjfx Ahzet – Fine machining of metal and aluminum components – Ideal for prototyping, small batch production, and precision machining tasks Technical features (summary): – Compact gantry design with precision guides – CNC control with an intuitive user interface – Sturdy machine table with clamping options for various workpieces – Well-suited as a universal compact machining center for workshops or small enterprises Condition / Maintenance: – Well-maintained used condition from ongoing production – Machine serviced regularly – Test run possible by arrangement – Technical documentation and photos available Viewing by appointment possible. Dismantling and loading can be coordinated with the buyer.