Maschinen-Kaul GmbH & Co.KG

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Hedpfx Amszq E Hbo Tsr Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Single edge feeding: possible Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Profile scraper: yes Flat scraper: yes Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Extraction diameter: 160 mm Storage location:

Condition: ready for operation (used), Year of construction: 2017, Workpiece length: 3000 mm Maximum workpiece width: max. 1300 mm (with some limitations) 2 Panel clamping devices Lower working units: Milling unit Sawing unit for grooves, in the X and Y directions, adjustable to 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Hedpfx Ajzq Ab Nsm Tjr Upper working units: Milling unit Sawing unit for grooves, in the X and Y directions, adjustable to 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Control system: powerControl PC86 powerTouch Software: woodWOP Barcode reader system package Loading table with air cushion Crosswise belt conveyor for unloading Safety guards Multiple processing of workpieces up to 3000 mm in length Part of the upper drilling head requires maintenance.

Condition: excellent (used), BRANDT ambition 1210 edge banding machine Kdf210 Hodpfxjzqz Rpj Am Tor Pre-milling cutters Replaceable gluing pot Edge gluing with roller Pneumatic pre-trimming guillotine Pressure rollers Trimming cutters Top and bottom milling unit R1-R2 Profile cycler Flat cycler Max. workpiece height: 60 mm Max. edge band thickness (roll): 3 mm Feed rate: 11 m/min Machine length: 370 cm Connected power: approx. 9 kW Machine inspected, ready for operation.

Condition: used, machine/vehicle number: 008605, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr Hodpozqz Riofx Am Tjr

Condition: used, The machine was in operation until the very end. Hsdpfxszqzvxj Am Ter

Condition: excellent (used), Year of construction: 2018, Biesse Akron 1440 A Edgebander (EVA & HotAir) Description Adhesive System: EVA / Hot Air Pre-milling unit RT02 Gluing unit VC-511 End Trimming unit IN-801 Fine trimming Unit RF02 2 motors corner rounding unit AR02 EDGE SCRAPER RB02 GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 HOT AIR BLOWER UNIT PH-501 SMART-TOUCH CONTROL PANEL KIT HIGH QUALITY AND HIGH PRODUCTIVITY = Belt pressure beam. - Automatic track lubrication system. NC AXIS PACKAGE = AX-1: NC axis on the infeed fence. - AX-1: NC axis on edge pressing rollers.- AX-4, NC axes on Fine trimming Unit.- AX-2, NC axes on Corner rounding Unit.- AX-4, NC axes on Edge scraper MULTIPLE-SPEED KIT 12-18 M/MIN ANTIADHESIVE UNIT ADZ02 AIRFORCE SYSTEM - P2 PRO-GLUE KIT ADAPTIVE INFRA RED LAMP AdIRL-700 PRO-NESTING KIT FOR FINE TRIMMING UNIT ROUNDING FUNCTION ONLY SLIDING UNIT FOR CORNER ROUNDING UNIT PRO-NESTING KIT FOR EDGE SCRAPER UNIT CLEANING UNIT LPT02 SOPHIA - IoT Connection (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Hsdpjzqdi Uefx Am Tjr Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Preliminary milling unit Edge banding glue station for granules Capability to glue edge banding from 8-60 mm Feed rate of 11 m per minute Control panel with temperature setting Preliminary trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Pressing zone with three rollers Hjdpfjzqapksx Am Tor Cutting wheels to trim excess edge banding on the edges Top/bottom milling unit with profiled milling cutters Profiled sanding unit Flat sanding unit Corner milling unit Polishing unit Year of manufacture: 2013

Condition: new, Year of construction: 2026, Feed speed 9 m/min Board thickness 12 - 45 mm Minimum board dimensions (L x W) 90 x 170 mm Hjdezp Nz Hopfx Am Tor Worktable height 960 mm Table extension (steady rest) 560 mm Extension connector ⌀ 125 mm Installed power 6.1 kW Pre-milling 3000 rpm Front/back 12,000 rpm Top/bottom 12,000 rpm Polishing 3000 rpm Machine dimensions 3960 x 720 x 1748 mm Weight (net/gross) 800 / 950 kg Feed motor power 0.75 kW Glue tank heater motor power 1.315 kW Pre-milling motor power Milling 1.5 kW Plate heating motor power 0.125 kW Glue spindle motor power 0.25 kW Front/rear cutting motor power 0.37 kW Top/bottom cutting motor power 0.37 kW x2 Corner trimming motor power 0.37 kW Polisher motor power (top/bottom) 0.12 kW x2 (3-phase), 0.18 kW x2 (1-phase) Touchscreen control panel Air consumption 350 L/min Minimum extraction power 5 kW (for effective dust extraction from the edge bander)

Condition: new, Year of construction: 2026, Edge thickness 0.4 – 3 mm Glue board thickness 12 – 45 mm Difference between edge width and board thickness max. 4 mm Minimum length of glued boards 190 mm Minimum width of glued boards 90 mm Mechanical feed speed 7 m/min Glue temperature 130–250°C Tank capacity 1.2 l Pre-milling head speed 12,000 rpm Linear milling cutter speed 10,500 rpm Cutting blade speed 8800 rpm Polishing disc speed 2800 rpm Installed power 4.91 kW Feed motor 0.75 kW Heating motor 0.25 kW Final cutting motor 0.18 kW Linear milling motor 0.55 kW Polisher motors 2 x 0.18 kW Pre-milling motor 0.5 kW Compressed air pressure 250 L/min Extended table width (steady rest) 560 mm Working table height 856 mm Hodpfszp Nycox Am Tjr Shipping dimensions (L x W x H) 2820 x 720 x 1320 mm Net/gross weight 500 / 632 kg

Condition: used, Holz Her Sprint 1321, with edge banding and PU adhesive application Hedpfxjzp Hc Ue Am Tjr Heavy-duty version – edge thickness 0.4 – 15 mm SPS-based Edgecontrol control panel Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Fully automatic edge magazine for roll and strip material Gluing unit with cartridge system + PU adhesive application Automatic glue height adjustment / touch probe nozzle Pressure unit 1913, pneumatic Trimming unit for roll and strip material 1918 – 15 mm With pneumatic adjustment for trimming saw angle from 0-10° Multi-function milling unit with motorized adjustment: flush trimming – 15 mm, radius and chamfer milling – 15° Profile milling unit – corner rounding 1833 Scraping unit for chamfers and radii 1929, pneumatic Pneumatic infeed and outfeed Surface scraping unit – finishing, pneumatic Buffing unit for finishing and edge polishing with 2 textile discs HIGH-END spraying system Complete set of tooling Machine is in FULLY OPERATIONAL CONDITION Machine from a craft business / consignment sale Available from stock in Lieboch, NET € 21,500.00

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Hsdpozpzy Uofx Am Tor Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Hsdpfxezpzy Is Am Ter Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: used, Year of construction: 1996, Brandt edge banding machine in good, used condition. Hedpozpflnofx Am Tjr KTV51 - Year of manufacture 1996 The machine was purchased used and only used occasionally. The machine is being sold as part of the closure of our carpentry business. Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. A fixed inspection date is scheduled for July 18 or August 1 from 10 a.m. to 2 p.m. at our premises in Stemwede.

Condition: good (used), C.E. Hedpfxszn I Hfj Am Ter

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Press length without side pressing device: approx. 2,300 mm Press length with side pressing device: approx. 2,100 mm Press width, max.: approx. 1,400 mm 4 pcs. vertical pressing units, adjustable, each with Hsdpfxszn Iwqe Am Ter 1 crank drive pressing unit, and 1 counter piece 1 pcs. horizontal pressing unit with 2 crank drive pressing units 1 pcs. counter pressure rail, fixedly mounted on the left side 1 pcs. lower support rail with crank drive

Condition: excellent (used), Year of construction: 2011, I sell the fully equipped edge banding machine BRANDT Ambition 1220 FC, year 2011: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Glue scrapers Control panel Working thickness adjustment manual driven Material height 8-50mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Hjdozn Avzjpfx Am Ter Total weight 1600kg Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trim blades. Good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed speed: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection 1x100mm, 4x80mm including the shown ducting to 200mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be saved Units: Top pressure, manual adjustment with crank and SIKO counter Infeed fence, manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened Total of 2 interchangeable glue tanks for quick color change from white to transparent Gluing section with automatic edge feed for roll material up to 3mm Pressure zone with 3 rollers Cut-off saw with 2 motors Combination milling unit, easily adjustable by hand for flush milling, chamfer, and radius Corner rounding cutter R2 with diamond cutter, 1 motorized Radius trim blade R2, manually adjustable Hedpfxezn Afpo Am Tjr Glue joint trim blade with large roller, pneumatically controlled Hood lock CE marking Operating manual as a folder All indexable inserts of the milling units and trim blades have been replaced or re-sharpened, saws sharpened, diamond joining cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping cutter has not been replaced, but is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses renewed. Approx. 1200 operating hours, i.e. only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (L x W x H) Weight approx. 950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Max. volume flow rate: 5000 m³/h Nominal volume flow rate: 20 m/s, 3540 m³/h Hedpfjznwz Sjx Am Tor Nominal negative pressure at 20 m/s: 2500 Pa Residual dust concentration: 0.1 mg/m³ Sound pressure level: 75 dB Container Automatic filter cleaning Spark arrester The ductwork to multiple machines can be included Operational shutdown Dimensions: 2640 x 1140 x 2260 mm Extraction connection: 250 mm Weight: 825 kg Motor power: 5.5 kW Motor voltage: 400 V (50 Hz)

Condition: used, Year of construction: 2020, Edge banding machine K36, 1 unit, with PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece; rabbeting cutter (incl. DIA tool) up to 3 mm cutting depth; glue reservoir with quick-change reservoir preparation, incl. adhesive dispensing device; high-frequency miter saw station (approx. 16,000 rpm); high-frequency milling station (approx. 16,000 rpm with separate pneumatic milling adjustment); corner rounding cutter (min. workpiece length 300 mm, max. workpiece height 40 mm); radius cutting blade; flush cutting blade (incl. pneumatic extraction); cleaning station; 1 free space for a 2nd milling station or a slot cutting saw (slot cutting saw only if the cleaning station is removed); robust chain drive, ball-bearing mounted double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, signal lamp for workpiece sequence. Technical data: Max. edge thickness: 3 mm Max. rabbet thickness: 3 mm Min. workpiece height: 8 mm Max. workpiece height: 60 mm Max. rabbet height: 40 mm Min. workpiece length: 160 mm Feed rate: approx. 10 m/min Ready for operation: approx. 5 min. Power consumption: (400V – 3Ph – 50 Hz) Working height: approx. 900 mm Machine dimensions: approx. 5250x1250x2050 mm (L x W x H) Weight: approx. 1700 kg Dust extraction nozzle: 1x140 mm + 1x80 mm 8 mm version K36, 1 unit, quick-change fitting for corner milling cutter K36, 1 unit, extra charge for multi-radius cutting blade (R2/R1) K36, 1 unit, rabbeting up to 60 mm workpiece thickness K36, 1 unit, release agent spray device, plate K36, 1 unit, cleaning agent spray device, plate K36, 1 unit, nesting for milling station K36, 1 unit, nesting for radius cutting blade K36, 1 unit, pneumatic 3-point adjustment Hedeznvqfopfx Am Ter K36, 1 unit, Airtronic K36, 1 unit, extension of the support in the infeed and outfeed by 440 mm each; 1 unit. With the help of the plug-in extension of the infeed and outfeed of the table extension, Hebrock offers a solution for an enlarged support surface for improved workpiece handling by 450 mm. Level monitoring without reservoir, 1 unit. Thanks to a sensor on the top of the glue application roller, the operator can be shown a minimum glue level. A warning is displayed on the screen. Once this warning appears, a maximum panel processing length of 100 m (19 mm chipboard) is possible. Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Packaging surcharge, 1 unit Additional quick-change reservoir incl. level sensor Manufacturer: Hebrock Type: 36/14/1 Article No. H36/14/1, 1.0 unit Additional change motor for corner milling cutter K36 Manufacturer: Hebrock Type: 36/08/2 Article No. H36/08/2, 1.0 unit R1 Location: Supplier

Condition: good (used), Code: 0458 Brand: ARTECH BIESSE GROUP Hodpfx Amjznu Dwo Tsr Model: SINGLE 89-N - CE Standard Edge bander for straight and shaped panels , for edges in wood, veneer, PVC, plastic laminate etc. - CE Standard Technical data: Working height up to 120 mm Edge thickness 0,4 - 3 mm Minimum bending radius 20 mm Minimum panel length mm 300 Glue tank capacity 3 liters Motorized feed with adjustable speed Front extension for supporting large panels Work surface tiltable from 0 to 45 degrees Feed speed 4/16 mt/min with variable speed drive Trimmimg unit consisting of 2 superimposed motors Total absorbed power Kw 5,2 Working pressure bar 6 Overall dimensions mm 1300 x 900 x 1380 h Weight kg 350

Condition: excellent (used), Year of construction: 2009, Edge banding machine Manufacturer: hebrock Type: AKV 3005 DK-F Year of manufacture: 2009 Edge thickness: 0.4 - 3/8 mm Workpiece thickness: 8 - 60 mm Min. workpiece length: 190 mm Min. workpiece width: 80 mm Feed rate: 10 m/min Power: 12.1 kW Hjdpfoznuvmex Am Tsr Gluing unit: Yes Cutting unit: Yes Trimming unit: Yes Corner copying unit: Yes Radius trimming blade: Yes Surface trimming blade: Yes

Condition: used, Holz Her Auriga 1308 XL Black Edition compact design – edge thickness 0.4 – 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor Pre-milling unit for attaching before the gluing section Edge magazine fully automatic for coil and strip material Glue application station GLU JET cartridges + PU gluing Fully automatic operation of the units via NC servo axes Workpiece height 6-60 mm Automatic glue height adjustment High-gloss package Pressure unit pneumatically controlled Cutting unit pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of the cutting saw angle from 0-10° Hedpfx Asznuncjm Tjr Milling unit MOT4, flush milling 8 mm, radius milling - chamfer milling via NC axes Shaping milling unit – rounding of edges up to edge thickness 3mm in a single pass via NC axes Scraping blade unit MOT for chamfers and radii with 2 scraping blade holders via NC axes Surface scraping blade unit – finishing Buffing unit – polishing Spray system in the infeed and outfeed area complete DIA tool set included First delivery in 2018 Machine in TOP CONDITION from a lease return available from stock in Lieboch

Condition: used, Holz Her Auriga 1308 XL POWER Compact design - edge thickness 0.4 - 8 mm Motorized bridge adjustment Hjdpjznucyofx Am Tsr PLC screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and adhesive quantity control, and flushing routine fa.s.t. setting technology "Tool change in position" Long infeed guide with motorized adjustment Pre-milling unit for application before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU adhesive, with sensing nozzle Workpiece height 8-60 mm High-gloss package Pressure unit, pneumatically controlled Trimming unit, pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel of the trimming saw Multi-function milling unit FR301 MOT6, flush trimming 8 mm, radius milling – chamfer milling 15° via NC axes Profile milling unit FF301 MOT1 – rounding of corners up to edge thickness 3 mm or alternatively chamfer = 45°, working height 12 – 60 mm, postforming possible Scraping unit ZK301 MOT4, for chamfers and radii with 2 scraping blade carriers via NC axes Surface scraping unit FK701 with pre- and post-sensing - finishing Buffing unit - polishing Spray system in the infeed and outfeed area Spray system with lubricant for high-gloss edges Complete DIA tool set included First delivery 2022 Machine in TOP condition, taken out of service - small business Available from stock, Lieboch

Condition: excellent (used), Year of construction: 2024, Hebrock adhesive basin / exchange basin Hedpsznnlhsfx Am Tsr For Hebrock K36 Year of manufacture: 2024 Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Space requirement: 2800 x 1200 mm, Weight: approx. 450 kg, Edge thickness: 0.4 - 5.0 mm, Strip material: width x height 5 - 49 mm, Feed rate of workpiece: 8 m/min, Power of feed motor: 0.75 kW, Hedpfoznbrzex Am Ter Max. workpiece dimensions: length 210, width 70, thickness min./max. 10–45 mm, Mains voltage: 3 × 400 V.