Kellermann-Bedachungen GmbH

Condition: used, Roll Forming Line Dreistern with Accessories Machine Bed Features: - Production direction: right to left - Axis spacing: 130 mm - 18 driven stations - 1x 9.2 kW DC motor Roll Former Stand Features: - Tool width per stand: 135 mm - Working shaft diameter: 30 mm - Working shaft connection: 20 mm with keyway - Fixed lower shaft - Axial adjustment - Adjustment range UW-OW: 60 - 100 mm Scope of Delivery: - Machine bed - Strip butt welding device - Entry table - Straightening unit - DC motor - Control panel - Operating console - 2 straightening roll holders - 3 gearboxes - 9 roll former stands - 36 universal joints Gsdpfx Asy Sm Sdogpeub Was operating flawlessly in production until dismantling at the customer's plant. Coil decoilers and punching machines are also available from us as used equipment. For the reinstallation of the system, we can support you with: - Planning - Mechanical overhaul - Control system retrofit - Painting - Safety concept - CE documentation

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Dreistern P3.100 Roll Forming Line with Flying Cut-Off Machine and Accessories Machine Bed Features: - Production direction: right to left - Center distance: 330 mm - 48 stations - 44 driven stations (44 gearboxes) - Quick-change plates - Mechanical quick-release clamps - Coolant piping - 1x 42 kW Baumüller motor - 1x 15 kW Baumüller motor Roll Forming Stands Features: - Stand tool width: 275 mm - Working shaft diameter: 50 mm - Working shaft connection: 30 mm with keyway - Fixed lower shaft (6 units with adjustable lower shaft) - Axial adjustment - Upper to lower shaft adjustment range: 80 – 170 mm Gearbox Specifications: - Worm gear ratio: 1:21 - Lower to upper shaft gear ratio: 1:1 Flying Cut-Off Machine Features: - Travel length: 1900 mm - Profile rail guide - Ball screw drive - Bosch servo motor - Valve block with punching unit - Folding table length: 3000 mm - Emergency stop Godpjy Sm Eqjfx Agpjub Scope of Supply: - Machine bed with gearbox carrier - Infeed table - Pneumatic measuring wheel unit - Straightening device - Band filter unit, 500 liters - Hydraulic unit for cut-off - 44 gearboxes - 44 roll forming stands - 2 Baumüller DC motors - 88 universal joint shafts The line was in perfect working order in production up to the time it was dismantled at the customer site. No control system is included. Decoilers and punching presses are also available as used equipment. The system can be easily extended with additional stations if required. We offer assistance with reinstallation of the line, including: - Planning - Mechanical overhaul - Control system construction - Painting - Safety concept - CE documentation

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Roll Forming Line Dreistern P3.100 with Accessories Machine Bed Features: Production direction: right to left Centre distance between axes: 330 mm 22 stations 18 driven stations (18 gearboxes) Quick-change plates Mechanical quick release clamps Coolant and lubricant piping 2 x 18.5 kW Bosch motors Roll Forming Stands Features: Gedoy Sm A Aepfx Agpjub Tool width per stand: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower shaft to upper shaft (UW-OW): 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower shaft to upper shaft ratio (UW-OW): 1:1 Scope of Delivery: Machine bed with gearbox carrier Infeed table Measuring wheel unit, pneumatic Special straightening unit 18 gearboxes 18 forming stands 2 Bosch motors 36 drive shafts The machine was running flawlessly in production until it was dismantled at the customer's site. Control system is not included. Decoilers and punching units are also available as used machines. The line can be easily extended with additional stations. We can support you with the reassembly of the line, offering: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Profiling Line Dreistern P3.100 with Accessories Machine Bed Features: Production direction: left to right Center distance: 330 mm 18 stations 16 powered stations (16 gearboxes) Quick-change plates Mechanical quick-release clamps Coolant piping 2x 18.5 kW Bosch motors Profiling Frames Features: Tool width frame: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower to upper shaft: 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower to upper shaft ratio 1:1 Scope of Delivery: Machine bed with gearbox support Infeed table Measuring wheel unit, pneumatic Special straightening unit 16 gearboxes 16 profiling frames 2 Bosch motors 32 cardan shafts The machine was working flawlessly in production until dismantling at the customer's site. Control system not included. Coil decoilers and punching units are also available used. The line can easily be extended with additional stations. We can support you with reassembly of the line: Gujdpfoy Sm Apox Agpjb Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, Flying profile cutting machine for Dreistern P3.125 with accessories Production direction: left to right Travel distance: 2000 mm Aluminum carriage with shaft recirculating ball guide Height adjustment via hydraulic cylinder and wedges Disc spring clamping of height adjustment, hydraulically releasable Low-backlash Graessner gearbox with Rexroth servomotor Folding table: Roller guide Hydraulically folding Rollers recessed in the table Gsdpfx Agoy Sldfjpjub Dimensions: 380 x 6200 mm Accessories: 7.5 kW hydraulic power unit with cooler and accumulator Infeed roller guide Hole index detection Hydraulic valves on the carriage Punching unit Separation device Original documentation In perfect working condition until disassembly at the customer's plant. Control unit not included. For integration into an existing roll forming line, we can support you with: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, Year of construction: 2001, HEAVY DUTY ROLLFORMING LINE Gujdey Rxzhspfx Agpob 11 STATIONS WIDTH: 450 mm FULL OVERHAUL

Condition: ready for operation (used), A Haffner double mitre saw with robust construction is available. Saw units: 2, indexing positions: 90°/45°/22.5°, unit inclination: 45°, saw blade diameter: 330mm, motor power: 1.1kW, max. cutting length: 3000mm, max. cutting width: 130mm, max. cutting height: 120mm. An on-site inspection is possible. Gusdpfsy Rtglsx Agpjb

Condition: new, Fully automated machines for standing seam sheet metal profiling (CLICK), available in various sizes and designs. We offer several standing seam profiles. Delivery times and machine configurations are determined on a case-by-case basis for each order. Please contact us for additional information and technical documentation. Roll forming machine. Guodpfx Agoy Rkuyepjb

Condition: ready for operation (used), Year of construction: 1982, An Elumatec double mitre saw for aluminium and plastic profiles, including E200 positioning unit, is available. Saw head swivel: 45°, saw blade diameter: 380mm, speed: 2800rpm, max. cutting capacity: 195mm/120mm, min. cutting length: 520mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Guodpfxjy Hk The Agpob

Condition: ready for operation (used), A 4-axis CNC bar machining center Elumatec is available. Version: 7.8m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible. Gsdsy Aafxepfx Agpjub

Condition: excellent (used), functionality: fully functional, corner press Gujdjyxy Tnepfx Agpjb

Condition: like new (used), Year of construction: 2023, operating hours: 120 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. Gusdpfxjyw Rzaj Agpob The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: new, Fully automated roof tile profiling machines available in various sizes and designs. Our range includes over 60 roof tile patterns. Delivery time and machine configuration are determined individually for each order. Please contact us for further information and technical documentation. Gedpfjyu Sz Ijx Agpeub

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, sheet thickness aluminum (max.): 1 mm, mileage: 509 km, For sale: machine for manufacturing roofing panels in Trapezoidal 20 profile. Processes metals with thicknesses from 0.3 to 0.8 mm or aluminium up to 1 mm. Optional decoiler (price €5,000) and stacking table (price €3,000) available for purchase. Gujdpfx Asyu H D Rsgpeb

Condition: ready for operation (used), Year of construction: 2007, A Schüco roll crimping machine for joining aluminum half-shells with polyamide insulating bars in thermally broken profiles is available. Profile throughput speed: approx. 34m/min, max. profile installation depth: 250mm, max. profile height: 400mm, max. insulating bar spacing: 300mm, machine dimensions X/Y/Z: approx. 900mm/900mm/1650mm, weight: approx. 750kg. Including infeed and outfeed. Documentation available. An on-site inspection is possible. Godpfoyugm Esx Agpjub

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Worktable 5000 x 1500 mm (left table 3000x1500, right 2000x1500) Z-axis travel: 1000 mm 2 electrospindles of 12kW each (up to 24,000 rpm) each with a 6-position tool changer Gujdjytyfropfx Agpsb 16-position disc tool magazine Numerical control: OSAI S510 Software: ALPHACAM Portable control console Work surface consists of 2 tables Electrical cabinet with air conditioning Set of suction channels and chip collection trays

Condition: ready for operation (used), Year of construction: 1995, Three similar profile milling machines CMS are available. Two of the units were used as spare parts carriers, therefore only one functional machine with 2 spare parts donors is referred to here. Spindle power: 7.5kW, tool holder: BT30, speed: 15000rpm, machining dimensions X/Y/Z: 620mm/1200mm/193mm, machining dimensions W/V: 2440mm/629mm, feed rate: 12m/min, positioning accuracy: 0.001mm, control: IBH/ATEC 6000HS, years of manufacture: 1992/1995/1996. Documentation available. An on site inspection is possible. Gedpeytgnmofx Agpeub

Condition: used, sheet width 400 mm plate thickness 3 mm stations . System with the best coiler, straightener, eccentric press, and profile rolling machine Cutting-off system and numerous accessories Iron double coiler Type SFD 2000 Schleicher straightener Edelhoff AZR 3/100 eccentric press Press force 100 t Godpfx Ageyq Sx Espoub Stroke adjustment 20-110 mm Ram adjustment 100 mm Ram strokes 105 /min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1982, sheet width 480 mm plate thickness 3 mm stations 13 weight of the machine ca. 11 t dimensions of the machine ca. 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Gusdoyqtx Hopfx Agpjb possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1990, Heavy-duty rollforming line 10 stations Gsdpfx Agjymzzujpeub Width: 260 mm

Condition: used, Year of construction: 1990, HEAVY DUTY ROLLFORMING LINE 11 STATIONS WIDTH: 450 mm Gusdsymzywjpfx Agpjb

Condition: used, Year of construction: 1990, HEAVY DUTY ROLL FORMING LINE Gujdpfx Agsymzxyepsb 9 STATIONS WIDTH: 450 mm

Condition: used, Year of construction: 2008, SOMERTEKNO - KLIPKLASIK 1000 - 2008 - SOMERTEKNO finnish rolling line Gedpfsymg Utjx Agpoub - see profile on photos - width 1000 mm - no length limitation - rusty rolls can be cleaned - can be tested under power - decoiler not in price, this costs extra

Condition: used, Year of construction: 2008, DOFAK - DOFAK 1180-1200 mm - 2008 Guodsyl Slzopfx Agpsb - Rollforming machine for metallic tiles - Producer: DOFAK SP. J. - Mechanical decoiler: ~7000 kg - Coil troley: ~7000 kg - Disk cutter - Entry + foiler - Roll former 7800 mm - Hydraulic press - Hydraulic guillotine - Run-out table 7800 mm - Transporter 6000 mm Overall dimensions: - Length (without decoiler): 18000 mm - Width: 2500 mm - Height: 2000 mm Electrical terminal: - Supply voltage: 3 x 400 V - Control voltage: 24 V - Frequency: 50 Hz - Working pressure of the hydraulic system: 10 Mpa - Total installed Power: 17 kW Control pannel: Beijer HT60 Occupied surface: 22000 x 2500 mm Parameters of profiled sheet: - thickness of profiled sheet: 0.40 – 0.45 – 0.50 mm - width of sheet coil: 1230 / 1250 mm - total width of roof tile: 1180 / 1200 mm - net width of roof tile: 1100 mm - length of roof tile: 300 – 350 – 400 mm - height of stamping: 15 mm Spare parts - guillotine - hydraulic cylinder for press    

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 1 mm, shaft diameter: 50 mm, input voltage: 400 V, coil weight: 3,000 kg, FOR SALE – Roll Forming Line for Drywall Profiles UW / CW (EU + IT) For sale: cold roll-forming line for metal drywall profiles, complete and high-productivity, designed for the production of UW, CW_EU and CW_IT profiles. Main features: * Roll forming line with 18 forming stations * Double hydraulic decoiler (3 tons per head) * Introduction and lubrication unit * Integrated rotary punching unit * Multi-axis adjustable straightener * Double wagon cutting and punching unit * Dedicated cutting and punching dies for UW, CW_EU and CW_IT * Bosch Rexroth hydraulic power unit * CMZ control * CE certified * Complete safety guarding system Performance: * Working thickness: 0.50 – 1.00 mm * Material: DX51D + Z100 * Production speed: up to 130 m/min * Dimensional tolerance: ±0.5 mm/m * Total line length: approx. 15 m Guedpfxsyi Hl Rj Agpob Included equipment: * Full set of cutting and punching dies * PLC software backup * Complete technical documentation * Construction and as-built drawings * CE Declaration of Conformity Machine condition: Complete industrial machine, high-end specification, manufactured by an international specialized roll-forming machinery producer. Ideal for manufacturers of drywall systems. Machinery is used but constantly updated and improved in every part. Pictures show both factory collection (so when new) + some of the updates which have been done. 📍 Available for inspection by appointment