Negomat

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Lodpsz Er Ulefx Aazert Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Traub CNC lathe TNS60, TX8D, year of manufacture 1990, serial no. 1403 C-axis, rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, through-hole chuck cylinder, collet chuck 185E, AMK drive. Lrjdpfx Aoz Eqmtoazot Very good condition, fully functional. Machine geometry has been checked and corrected/adjusted. The machine was completely overhauled in 2019 and has had few operating hours since then; guide rails, spindle bearing, and ball screws are in top condition. Scrapers and belts have been checked and replaced. The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, MONFORTS RNC 600 AC – Technical Data Manufacturer: MONFORTS Type: RNC 600 AC Machine Type: CNC lathe Design: horizontal CNC lathe Control System: SIEMENS SINUMERIK Drive System: SIEMENS SIMODRIVE 611 Controlled Axes: X, Z, C, clearly displayed on the control system Additional Axis Display: Auxiliary axis (AWZ), displayed as an angular axis in degrees C-Axis: present / clearly displayed in the CNC control system Main Spindle: designated as master spindle S1 in the control system Tool Turret: 12-station turret Workpiece Clamping: 3-jaw chuck Tailstock: present Tailstock Mounting: MK 4 Tailstock / Drawing Dimension: Ø 90 mm Lodpfxoz Elmne Aazsrt Tailstock Drawing Dimensions: 105 mm / 86 mm Length Dimension according to Tailstock Drawing: 1,570 mm Additional Length Dimension: 1,200 mm Setting Dimension according to Drawing: approx. 1,310 mm

Condition: used, Year of construction: 2005, Equipment: documentation/manual, We offer this used DMG MORI SPRINT 20 LINEAR CNC turning and milling center, manufactured in 2005. Manufacturer: DMG MORI Model: SPRINT 20 LINEAR Lrodjz Ehykjpfx Aazet Year of manufacture: 2005 Condition: Used Machine type: CNC turning and milling center If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2019, Swing over bed 900mm, Swing over saddle 690 mm, Maximum turning diameter 650mm, maximum turning length 3070mm, bar capacity 165.5mm, Spindle speed 1,500rpm, milling speed 4,000rpm, spindle power 45/37KW, 12 station turret, Fanuc I Plus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor, Lsdpsz Ehvfsfx Aazsrt

Condition: ready for operation (used), Year of construction: 2005, operating hours: 48,000 h, functionality: fully functional, turning length: 1,080 mm, turning diameter: 600 mm, spindle speed (max.): 2,500 rpm, total height: 2,140 mm, total length: 5,300 mm, total width: 2,160 mm, overall weight: 9,000 kg, spindle diameter: 530 mm, Equipment: documentation/manual, Gildemeister CTX 620 — это тяжёлый токарно-фрезерный ЧПУ-станок, предназначенный для обработки крупных и сложных деталей. Станок оснащён гидравлическим патроном 21″, системой управления Siemens Sinumerik 840D, а также осью C, осью Y и приводным инструментом, что позволяет выполнять на одном станке токарную обработку, фрезерование, сверление, нарезание резьбы и другие операции. Большая рабочая зона, высокая жёсткость конструкции и мощный шпиндель позволяют выполнять как тяжёлое черновое точение, так и точную чистовую обработку деталей большого диаметра и длины. CTX 620 особенно хорошо подходит для серийного производства, где важно сократить количество установок детали и обеспечить стабильную точность обработки. Lredpfsz Ehgqex Aazst

Condition: excellent (used), Year of construction: 2021, Great opportunity to buy an outstanding universal turning center (milling and turning) including automation with the Robo2Go: a flexible workpiece loading and unloading system with a six-axis-industrial-robot. The CLX 450 TC was built in 2021 and first used for actual production in 2022. About 9300 operating hours and only 3800 spindle hours. The Robo2Go was built in 2018, but is actually 'like new', because it was barely used. CNC control Celos X with SIEMENS Sinumerik One Max. turning diameter 400 mm Turning length 1100 mm Bar capacity max. 65 mm X-axis travel 276 mm Z1-axis travel 755 mm Z3-axis travel 775 mm Y-axis travel +/- 100 mm B-axis travel +/- 120° Tool holder HSK-T 63 Tool changer 60 positions Additional 1,000L coolant tank with programmable pressure 80-bar through-spindle cooling 60-tool tool changer Safety fence around robot Please check the full technical specifications and options in the attached documents. Optional: Large set of HSK-63 toolholders (without the inserted tools) Lodpez Eg H Ajfx Aazjrt The machine can be viewed in operation upon appointment. More pictures and videos available on request.

Condition: ready for operation (used), Year of construction: 2000, overall weight: 12,500 kg, Vertical, heavy-duty CNC turning machine with Fanuc control; 630 power chuck; Lsdpfx Aasz Ea E Eozsrt 850 mm turning diameter; no driven tools; good condition; chip conveyor; various tool holders; machine manuals and documentation; without coolant tank and pumps – can be retrofitted if required; ideal for dry machining.

Condition: good (used), CNC turning and milling center with bar loader, FMB Turbo 3000 Ljdpfxez Eayio Aazort Turning diameter over machine bed: 400 mm Turning diameter over cross slide: 225 mm Turning length: 640 mm Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), CNC turning and milling center with bar feeder FMB Turbo 3000 Turning diameter over the machine bed: 280 mm Turning diameter over the cross slide: 185 mm Turning length: 250 mm Lredpfx Aajz Eaxrozot Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: DMG CTX beta 500 V6 Control: Siemens 840 D Year: 2012 Working hours: 42.067 h Spindle running time: 20.209 h SPECIFICATIONS Max. turning length: 500 mm Turningdiameter: 410 mm Lrjdpfx Aasz D Ug Iszet Max. swing over bed: 700 mm Spindle bore: 87 mm Bar capacity: 77 mm C-Axis: 0,01° Main Spindle: ISM 76 Spindle speeds: 25 - 5.000 rpm Spindle power: 25 / 34 kW Torque: 280 Nm Subspindle: ISM 52 Travel Y-Axis: mm Amount of turrets: 1 Tool: VDI 40 Driven Tools: 12 revolution driven tools: 4.000 drive power driven tools : 11,3 kW Equipment Chip conveyor Short Bar Loader: LNS QLS 80 S2

Condition: good (used), Year of construction: 2009, CNC Turning / Millingcenter Machine type: DMG CTX Beta 800 V4 Control: Heidenhain 4290 Year: 2009 Available after: sofort / now SPECIFICATIONS Max. turning length: 800 mm Turningdiameter: 410 mm Max. swing over bed: 700 mm Bar capacity: 67 mm C-Axis Main Spindle Max. revolution: 5.000 rpm Lrsdpfx Ajz D Ugzeazot Spindle power: 34 / 25 kW Tailstock Travel X-Axis: 300 mm Y-Axis: 60 +/- mm Z-Axis: 800 mm Amount of turrets: 1 Tool capacity: 12 Tool: VDI 40 Driven Tools: 12 Equipment Chip conveyor High pressure pumps Collets: Schunk Chip rinsing pistol

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, Equipment: documentation/manual, Citizen Miyano BNA42 DHY3 Year: 2019. First used: 2021 7 axes: X1, X2, Y1, Z1, Z2, C1, C2 High rigidity and high precision Y-axis 2 turrets, 2 spindles 173E collet chuck on both spindles Maximum main spindle speed: 6,000 rpm Lredpsz D Tz Refx Aazot Maximum sub-spindle speed: 5,000 rpm Fanuc 0i-TF CNC control Maximum bar capacity: 42 mm Maximum driven-tool speed: 5,000 rpm

Condition: ready for operation (used), Year of construction: 2002, operating hours: 44,462 h, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK, number of axes: 4, This 4-axis Gildemeister CTX -400 twin was manufactured in 2002. It features a robust turn-mill centre design, ideal for complex machining tasks. The machine is equipped with a chip conveyor system for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister CTX -400 twin turn-mill centre we have for sale. Contact us for further details. Lrodjz D Trpepfx Aazst - Machine Model: CTX -400 twin- Year of Manufacture: 2002- Voltage (U): 400 V- Phases: 3 ~- Frequency (f): 50 Hz- Apparent Power (P): 44 kVA- Rated Current (I): 64 A- Fuse Rating: 80 A- Control Voltage (AC): 230 V- Control Voltage (DC): 24 V=- Additional Accessories / Documentation: - Transport and Installation Guide - Software / System Disks (CTX 400 twin / CTX 400E V6, Microsoft Windows 98 Second Edition) - Daikin Oilcon Unit (Model: AKS35K-U63, 200V 50/60Hz, Comp: 250W, Pump: 200W, Refrigerant: R22 / 0.54 kg, Ref. Oil: SUNISO4GS-DI. / 0.4 L, Weight: 55 kg) - Chip Conveyor System Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2001, 7-axis turning and milling center Manufacturer: OKUMA Type: MacTurn 50 Year of manufacture: 2001 Control: OSP-U100L Spiral-circular interpolation Upper turret HS ATC: X1 = 598 mm Z1 = 1,660 mm Y = 230 mm, +110 mm, -120 mm C = 360/0.001 B = 360/1, indexed Maximum turning diameter: 610 mm Minimum turning length Z1: 1,500 mm Swinging diameter: 610 mm Turning diameter over the cross slide: 580 mm Center distance approx.: 2,000 mm Tool holders: BT50 Driven tool holders BT50 = 40 - 3000 rpm ATC magazine 72 BT50 For turning: ≈ 36 Driven tool holders: ≈ 36 Lower turret V8: X2 = 200 mm Z2 = 1,045 mm Maximum turning diameter: 380 mm Turning length Z2 = 1,045 mm Swinging diameter = 380 mm Tool holders: VDI40 Turret: 8 positions VDI40 Lrsdpfoz D I Ifjx Aazot Spindle: Speed range: 14 - 2800 rpm at 37 kW Chuck: D400 mm Spindle bore: 110 mm Spindle nose: A2-11 Torque approx.: 2,000 Nm Coolant system with 40 bar pressure New screen New panel Several BT50 tool holders Weight approx.: 20 tons Space requirement L/W/H: 8,000 x 3,500 x 3,500 mm 22926

Condition: like new (used), Year of construction: 2018, DOOSAN GT 2600 M LATHE YEAR 2018 ONLY: 652 CUTTING HOURS MAX. ROTATING DIAMETER: 630 mm MAX. MACHINABLE LENGTH: 658 mm MAX. MACHINABLE DIAMETER: 460 mm BAR FEEDER CAPACITY: 82 mm SPINDLE SPEED: 35 - 3,500 RPM SPINDLE MOUNT: ASA - 8 TRAVEL: X: 265 mm Z: 680 mm MOTORIZED TURRET Lrodpfxez D Eq Rj Aazst TAILSTOCK CHIP CONVEYOR TOOL PRESETTING WEIGHT: 5,500 KG

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 70,000 W, spindle speed (max.): 14,000 rpm, travel distance X-axis: 450 mm, overall weight: 32,000 kg, controller manufacturer: SIEMENS, controller model: 840D solution line, number of axes: 5, This 5-axis Weingartner Pick Up 400 machining center for screw manufacturing was manufactured in 2023. It features a maximum workpiece length of 4,000 mm and a maximum workpiece diameter for milling of 180 mm. The machine is equipped with a Siemens 840D control system and offers advanced simultaneous machining capabilities. If you are looking to get high-quality screw manufacturing capabilities, consider the Weingartner Pick Up 400 machine we have for sale. Contact us for further details. • Control: Siemens 840D solution line (NCU 720.3), OP19 touchscreen + Siemens TP700 touch panel • Simultaneous machining: 5-axis; B‑axis turning • Workpiece capacity: max length between centers 4,000 mm; max diameter for milling 180 mm; chuck size Ø260 mm • Power supply: 3 × 400 V / 50 Hz; main fuse approx. 200 AAxes • X: travel 450 mm; rapid 20 m/min • Y: travel −80 / +150 mm; rapid 20 m/min • Z: rapid 25 m/min • B: swivel range ±45°; max swivel speed 90°/s; clamping torque 5,000 Nm Lrodpfez D Efhjx Aazjt • C: max speed 50 rpm; max torque 1,740 Nm (cont.) / 2,580 Nm (40% duty) • W (tailstock slide): rapid 15 m/min • VZ1 / VZ2 (steady rest slides): rapid 15 m/minTurning / Milling Unit • Unit: UFE-400; tool spindle: MDFK • Power: 45 kW (continuous) / 70 kW (40% duty) • Max spindle speed: 14,000 rpm; nominal speed: 1,560 rpm • Torque: 275 Nm (continuous) / 430 Nm (40% duty) • Tool interface: HSK 100‑T (compatible HSK 100‑A / HSK 100‑T); additional interface: Capto C8 • Internal coolant: 80 bar; 20 l/minTailstock • Hydraulically operated quill; diameter 190 mm; stroke 200 mm; Morse taper MK6Machine equipment / configuration • Front and rear self-centering steady rests; independently CNC-positionable • 2 prismatic steadies for screw milling • Steady jaw ranges: 15–30 / 30–65 / 65–140 / 140–200 mm • Hydraulic SMW KNCS‑N 260 power chuck with quick jaw change • Central lubrication system • Fully enclosed machine housing with driven safety doors; Visiport inspection windows • Hydraulic and pneumatic systems • Coolant and oil mist extraction preparation • Electronic hand control for B/C/X/Y/Z axesSoftware / control functions • Siemens Safety Integrated; Profibus / Profinet; OPC UA interface • 5‑axis simultaneous machining; B‑axis turning; TRANSMIT / TRACYL • Temperature compensation X/Y • DNC remote diagnostics; WMDS Diagnostic System; Telediagnosis capability • weinCAD EXTRUDER DESIGNER; WeinEXT – Praxis Additional equipment • Hinge-belt chip conveyor • Coolant filtration system KF 200: 1,400 l tank; 40 µm filtration; high‑pressure pump 80 bar / 46 l/min; low‑pressure pump 13 bar / 160 l/min; automatic oil skimmer • Oil mist extraction unit: airflow approx. 4,000 m³/h • Operating platform with stairs and railing

Condition: excellent (used), Year of construction: 2008, OKUMA MULTUS B400 – Technical Data Manufacturer: OKUMA Model: MULTUS B400 Machine Type: CNC Turning/Milling Center Lsdpfx Aajz D D S Tezort Control: OKUMA OSP P200L Year of Construction: 2008 Main Spindle Enlarged main spindle Speed range: 38 – 2,800 rpm Spindle nose: Ø 110 mm Spindle bore: Ø 150 / 110 mm Spindle nose: Size 11 Drawtube inner diameter: max. Ø 100 mm Counter Spindle Counter spindle as W-axis Internal clamping device Bore in the drawtube: Ø 70 mm Milling Spindle / Driven Tools Tool interface: HSK 63 Max. speed: 10,000 rpm Power: 14 kW Maximum torque: 85 Nm Tool Changer 40-position tool changer Version with 40 tool positions instead of the standard version with 20 positions Clamping Technology KITAGAWA B15-117-K11 3-jaw power chuck Chuck bore: Ø 117 mm SMW VNK 250/110 power chuck cylinder Bore: Ø 110.5 mm SMW SIN-S 150 power chuck cylinder KITAGAWA B210-75 K8 M80 3-jaw internal chuck Mounting flange ASA A2 Size 8 Coolant / Chip Conveyor INTERLIT ISF 540/6670 hinged belt chip conveyor Integrated coolant tank INTERLIT SPB4 gravity belt filter Clean tank: 900 liters Supply pump TH 90/690 FSI Frequency-controlled pump Coolant pressure switchable in 2 stages Software / Machining Functions Extension kit "M" for OSP P200L One-Touch IGF-M-D Helical interpolation Thread milling Multi-function tool software for special tools Automation Automatic machine doors Two doors that open simultaneously Opening and closing via M-command Robot interface Type E Prepared for automatic loading and unloading in twin-spindle machines

Condition: ready for operation (used), Year of construction: 2004, spindle motor power: 46,000 W, spindle speed (max.): 3,000 rpm, travel distance X-axis: 12,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D, table load: 25,000 kg, number of slots in tool magazine: 60, number of axes: 4, This 4-axis PAMA Speedram 1000 was manufactured in 2004. It features an impressive X-axis travel of 12,000 mm, Y-axis travel of 4,000 mm, and Z-axis travel of 1,000 mm. The machine includes a robust spindle diameter of 160 mm and a maximum spindle speed of 3,000 rpm. If you are looking to get high-quality milling capabilities, consider the PAMA Speedram 1000 mill-turn centre we have for sale. Contact us for further details. • W-axis travel: 700 mm • Spindle orientation: Horizontal • Spindle diameter: 160 mm • Spindle torque: 2,300 Nm • Ram section: 360 × 400 mm • Rapid traverse X/Z: 25,000 mm/min • Rapid traverse Y: 15,000 mm/min (20,000 mm/min possible) • Rapid traverse W: 20,000 mm/min • Tool cone: BT 50 BIG-PLUS Lsdpfxoz D Dlgj Aazort • Operator pendant: Motorized Additional equipment • Chip conveyor • Coolant through spindle: 15 l/min, 25 bar • External coolant: 50 l/min, 4 bar • Vertical fixed head TS 20 M: 30 kW, 2,500 rpm • TG4 retractable table: 2,000–3,000 mm, 25,000 kg load

Condition: ready for operation (used), Year of construction: 1998, operating hours: 116,213 h, travel distance X-axis: 245 mm, travel distance Z-axis: 1,035 mm, controller manufacturer: MAZATROL, controller model: T-Plus, number of axes: 3, This 3-axis Mazak SQT-30M * 1000 turn-mill centre was manufactured in 1998. It features a maximum turning diameter of 410 mm and a turning length of 989 mm. The machine is equipped with a Mazatrol T-Plus control system and offers a spindle speed range of 35 - 3,300 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak SQT-30M * 1000 machine we have for sale. Contact us for further details. Lrsdpfxsz D Dfgj Aazet - Working Hours: 116,213 hours- Max. Swing Diameter: 560 mm- Max. Swing Over Carriage: 500 mm- Max. Turning Diameter: 410 mm- Standard Turning Diameter: 336 mm- Max. Turning Length: 989 mm- Max. Bar Capacity (Diameter): 77 mm- Main Spindle Speed Range: 35 - 3,300 rpm- Main Spindle Motor Power: 26 kW / 22 kW (30 min / 100% continuous)- Max. Spindle Torque: 637 Nm- Spindle Nose: A2-8"- Spindle Through-Hole: 88 mm- Chuck Diameter: 304 mm- C-Axis Indexing: 0° - 360° / 0.001°- Turret Positions: 12- Turning Tool Shank Size: 25 x 25 x 150 mm- Boring Bar Shank Diameter Range: 8 / 10 / 12 / 16 / 25 / 32 / 40 / 50 mm- Turret Indexing Time: approx. 2.2 s- Driven Tools Motor Power: 7.5 kW- Driven Tools Max. Torque: 96 Nm- Driven Tools Speed Range: 90 - 1,500 rpm- Driven Tools Drilling Capacity: 23 mm- Driven Tools Tapping Capacity: M16 (H-type holder) / M12 (V-type holder)- Driven Tools End Milling Capacity: 25 mm- X-Axis Travel: 245 mm- Z-Axis Travel: 1,035 mm- X-Axis Rapid Traverse: 18 m/min- Z-Axis Rapid Traverse: 24 m/min- C-Axis Rapid Traverse: 100 rpm- X/Z-Axis Feed Rate: 0 - 5,000 mm/min- C-Axis Feed Rate: 1° - 2,000°/min- Tailstock Quill Stroke: 130 mm- Tailstock Quill Diameter: 100 mm- Tailstock Taper: MK 4- Tailstock Travel: 880 mm- Coolant Tank Capacity: 250 l- Coolant Pump Flow Rate: approx. 20 l/min- Coolant Pump Pressure: 5 bar- Power Capacity: 52 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 100 l/min- Required Floor Space: approx. 7.7 m²- Machine Weight: approx. 9,500 kg- Additional Equipment & Accessories: Tool Eye (tool presetter), 3-jaw hydraulic chuck 304 mm with soft/hard jaws, chip/coolant guard enclosure, work light, synchronized tapping, driven tool holders (CAT40 3x vertical, 3x horizontal), boring bar holders, set of adjusting tools, foundation equipment Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2021, swing over bed 1.050 mm Lsdpfx Asz Dxrusazsrt Swing over cross slide 825 mm max. working diameter 825 x 2.500 mm control FANUC main spindle speeds 1.200 U/min CNC Turning- and Milling Center | HWACHEON - HI-TECH 850 YMC equipped with a turret for driven tools as well as C- and Y-axis, programmable steady rest and tailstock. The machine is in a well-maintained condition and can be inspected at any time under power. Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HI TECH 850 | HI-TECH 850YMC | HITECH850YMC

Condition: ready for operation (used), Year of construction: 2015, operating hours: 13,747 h, machine/vehicle number: 00820000561, CNC turning machine DMG Mori CTX beta 800 TC, No. 00820000561, year of manufacture 2015, 24,796 operating hours, 13,747 load hours. Lrodpfx Aez Dv Ndoazst including: - DMG Mori control system - Oil leak on the Ergoline pump housing - Chip conveyor - Machine coolant system - Lubricant filter system - Material loader ILS MUK 7012-III, Machine No. 74101508, year of manufacture 04/2016 The machine can be purchased via an online auction on our website. You can access it by clicking on the link in the advertisement. Auction ends: October 7, 2026, 6:00 PM.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 5,000 h, machine/vehicle number: 10000000826, approx. 7,000 operating hours, approx. 5,000 load hours including: - DMG Mori Slim Line control system - Chip conveyor Ljdpsz Dv Dzofx Aazjrt - Rittal machine cooling system - Lubricant filtration system - Breuning ILS MUK-7012-IV material loader, year of manufacture: 12/2023 The machine can be purchased via an online auction on our website. You can access the website by clicking on the link in the advertisement. Auction end date: October 7, 2026, 6:00 PM.

Condition: used, WFL M 35 G MILLTURN is a CNC Turning‑Milling‑Drilling Center delivering high precision, accuracy and reliability. Capacities: distance between centres 2000 mm, max turning Ø 520 mm, spindle bore 77 mm; travels Z1 1500 mm/X1 550 mm, Z2 1355 mm/X2 230 mm, Y 250(-100/+150), B 220°. Specs: main/back spindles up to 4000 rpm, 29/33 kW (551/630 Nm), driven tools 6/13 kW, milling spindle 9000 rpm 15/20 kW (165 Nm); rapid traverses Z 40 m/min X 30/10 m/min; weight ~20000 kg; size 7900×5700×3250 mm. Accessories: lamp, coolant system, paper filtration, oil mist extractor, chip conveyor, automatic load/unload, Renishaw measurement. Enables tight tolerances; suited for automotive, aerospace, medical, watchmaking and machine‑tool sectors. Lsdpfoz Dv Dbjx Aazsrt

Year of construction: 2017, operating hours: 7,500 h, condition: excellent (used), functionality: fully functional, Manufacturer: MAZAK Model: VARIAXIS J-600 Year: 2017 Control unit: Smooth X X-axis travel: 850 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Spindle connection: DIN-69871 Lsdpfxjz Dt I Ro Aazsrt Tool magazine capacity: 30 Maximum spindle speed for milling: 12,000 rpm Maximum workpiece dimensions: 730 mm Maximum workpiece height: 450 mm 5-axis continuous operation: Yes Spindle power: 11 kW Table size: 600 x 500 mm High-pressure coolant system through the spindle: 20 bar B-axis travel: -120 / +90 Maximum workpiece weight (spindle): 500 kg