Innplast Kunststoffe GmbH

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 818, 2 used Cumberland Grinders Price per unit is 2500,- Year of manufacture: 2016 Technical specifications -Motor power 7,5 KW -Rotor speed: 1,440 RPM -Knife configuration; -3 roting knives -power supply 380-420v -Rotor Type: open, Soundproofed Blodpoza H E Sefx Amijh -Typical applications: Granulation of injection moulding parts

Condition: ready for operation (used), 3 kW Warranty: 6 months Bedpfxszay A Re Amislh

Condition: new, Rotor blade, 200 x 73.5 x 15 mm 7 pieces available Price per piece: 60 EUR Price for all 7 pieces: 350 EUR Bjdpfxozakrco Amislh

Year of construction: 2002, condition: used, functionality: fully functional, The Getecha grinding mill, model GRS 180 with water cooling, is for sale. Power: 2.2 kW Blades: 3 pieces Bedpfey Ugiuex Amiolh Screen: 6 mm

Condition: used, Year of construction: 2003, functionality: fully functional, The auxiliary mill from ZERMA, model GSL 180/300 Power: 4 kW Hopper opening: 290 mm x 270 mm Knives: 10 pieces on the holder, for a total of 30 Screen: 6 mm Bodpfjy Ughqex Amijlh

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: 18711, The used GETECHA RS 1615 is a compact auxiliary grinder (shredder) primarily used for the direct recycling of plastic sprues and small defective parts at the injection molding machine. This model is characterized by its particularly slim design, allowing it to fit even in tight machine areas (e.g., in the fall chute). Blodpfjy Tnqkjx Amijh For sale to businesses only, with no warranty.

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Bljdpfxoy Tixco Amijh Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Feed opening: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Blsdpfey Tiw Sox Amioh Stator knives: 2 Rotor knives: 4

Year of construction: 2008, condition: refurbished (used), functionality: fully functional, Used shredding mill Manufacturer: AVIAN Type: AG 80/120 7-3 Rotor diameter: 800 mm Width: 1,200 mm Infeed: 1,200 x 940 mm Rotor knives: 7 x 2 Stator knives: 3 (with deflector wedge) Cutting geometry: Double-angled cut Drive power: 132 kW Condition: fully overhauled Electrical control cabinet includes, without connection cables to the mill, the control for: Shredding mill 132 kW, Blower 11.0 kW Blower for fine material: 2.2 kW Conveyor belt: 1.5 kW Conveyor belt control, load-dependent Blsdpsy Szcdefx Amijh

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: TH GST 4060 2411 001, overall weight: 1,650 kg, rotor diameter: 400 mm, number of blades: 6, rotor width: 600 mm, power: 22 kW (29.91 HP), The compact inline granulators of the GST series are designed for use in injection molding and blow molding operations. They are suitable for recycling, for example, bulky parts such as bottles, canisters, crates, sprues, and injection-molded parts. Thanks to their low feed height, the machines can be easily loaded by hand or with a small conveyor belt. Low noise emissions and minimal space requirements make the GST series the perfect solution for inline size reduction. All GST series machines feature a compact, sound-insulated machine housing and a noise-dampened feed hopper. The feed hopper can be opened and closed via a gas pressure damper. The compact granulators are available with two rotor diameters (250 mm, 400 mm) and rotor widths from 300 up to 1000 mm. Smaller machines come with an open F-rotor, while the larger models are equipped with the heavier S-rotor. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents blockages. Thanks to the modular construction of the granulator, it can be easily upgraded with additional options such as replaceable wear plates. As with all ZERMA granulators, rotor and stator knives can be adjusted outside of the machine, significantly reducing downtime during maintenance. An adjustment gauge is included in the standard delivery. The control cabinet is mounted externally on the noise protection enclosure, and all wiring is routed internally within the unit. Technical Data: Bodpfsy Dgpmsx Amijlh Rotor diameter (mm): 400 Rotor width (mm): 600 Drive (kW): 22 Rotor knives (rows): 3 x 2 Stator knives (rows): 2 Screen perforation (mm): > 8 Cutting chamber (mm x mm): 400 x 600 Weight (approx. kg): 2000

Condition: used, functionality: fully functional, Slow-running plastic granulator – only 25 rpm, preventing thermal damage. Gear roller mill Goliath Plus 1 Bedpfxey Azp Es Amielh Milling chamber size (feed chute): 228 x 172 mm Power requirement only 1.5 kW Weight 230 kg (built like a tank) Dust-reduced, consistent granulate quality. Easy cleaning in 2–3 minutes! Very quiet operation. Low energy consumption. Rotatable cutter elements for double the cutter unit service life Paddle level indicator in the discharge hopper: No "grinding in its own juice" possible, as the mill shuts down in advance.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Manufacturer: Wanner Technik GmbH Model: 13.20 Grinding chamber dimensions: 130 x 200 mm Power: 2.2 kW Cascade knife arrangement Blodpfx Ameyz U Ekeish New knives!!! PRICE REDUCTION FROM 1350 TO 1250 EUR!!!

Condition: new, Year of construction: 2026, functionality: fully functional, Slow-running mill for storage Rotor diameter (mm) 180 Rotor width (mm) 300 Rotor speed (rpm) 150 Drive (kW) 4 Number of rotor blades 30 Number of stator blades 2 Screen perforation (mm) >5 Approx. weight (kg) 180 The slow-running mills of the GSL 180 series have a rotor diameter of 180 mm and working widths from 120 to 430 mm. The rotor is driven directly by a gear motor. The low rotor speed ensures a pleasant noise level and a high-quality product. The special rotor blades can be resharpened several times, eliminating the need for complex adjustment work. The mills are fed via a noise-reducing sandwich-type hopper. Depending on the task, the machines can be equipped with various hopper variants. Bedpoyzrfusfx Amielh Low and high base frames are available as options. The ground material is either vacuumed or filled into bags or a plastic container. Good accessibility for simple and quick maintenance work is ensured by the Quick Snap locking system.

Year of construction: 1997, condition: used, functionality: fully functional, Both Wanner mills, type 13.20, are available for sale. The price is per unit. A 10% discount is offered when both mills are purchased together. Blodpfxsyzmxio Amieh Motor power: 2.2 kW Rotor speed: 224 rpm Stator knives: 2 Rotor knives: 9 Feed hopper opening: 130 x 200 mm Screen size: 5 mm Throughput: 15–30 kg/h Extraction container: 6 liters Weight: 135 kg

Year of construction: 2004, condition: excellent (used), Mill Rapid 1528, 2.2 kW, inlet 38 x 42 cm, height 173 cm, 12 knives, 2 pastry boards, 2002, 2004. Bljdsyzmw Eopfx Amioh

Year of construction: 2023, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: 09623212, Soundproof enclosure Motor power: 3 kW Grinding chamber dimensions: 220 x 170 mm Number of rotor blades: 3 Number of stator blades: 2 Rotor diameter: 170 mm Rotational speed: 270 rpm (at 50 Hz) Screen hole diameter: 5 mm Bsdpfx Ajyyyzzomijlh The mill is new and has never been used! PRICE REDUCTION FROM 5500 TO 5000 EUR!!!

Year of construction: 1992, condition: good (used), functionality: fully functional, Manufacturer: Rapid Bsdpfx Amoyyp Uqoiolh Type: 1415 Grinding chamber dimensions: 150 x 140 mm Power: 1.5 kW New knives

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: 1345, Machine Type: Two-Roll Mixing Mill (Mischwalzwerk) Main Manufacturer: TROESTER MASCHINENBAU (Sontra, Germany) Year of Construction: 1981 Origin: Made in Germany (West Germany) Heating System: Integrated heating system, equipped with temperature sensors. Main Motor: EMOD (Herbert Odenwald Elektromotorenfabrik KG) Blodpfx Ameyx Etgjieh Power: 45 kW (60 HP) Protection Class: IP 23 Current/Voltage: 88A / 380V (Delta) / 50Hz Speed (n1): 1465 U/min Gearbox (Transmission): Jahnel Getriebebau GmbH (Bochum) Type: D 450 SO Ratio: 16.4 : 1 Output Speed (n2): 89.3 U/min Oil Specifications: ISO-VG 320 Safety Features: Equipped with built-in temperature sensors for motor protection (Kaltleiter-Temperaturfühler 130°C).

Year of construction: 2011, condition: excellent (used), functionality: fully functional, The Wanner Technik granulator, type D25.38c, is for sale: Motor power: 4 kW Rotor diameter: Rotor knives: 18 Stator knives: Weight: 410 kg Throughput: 120–200 kg/h Dimensions: Height 1655 mm Blsdpfxjyxw U Ae Amijh Width 1120 mm Depth 970 mm

Condition: used, Year of construction: 2015, functionality: fully functional, Cutting mill from DHB Maschinenbau in combination with an air extraction system and sound enclosure Motor power: 15 kW Year of manufacture: 2012 Rotor width: 600 mm Rotor diameter: 260 mm Number of rotor knives: 6 pcs in 3 rows Number of stator knives: 4 pcs in 2 rows Bedpfx Aeyxw Iijmielh Feed opening: 600 x 280 mm Rotor speed: 580 rpm Features: soundproof enclosure (optional: matching fan and cyclone, as well as complete extraction solutions available) Weight: 1250 kg Screen: 10 mm Dimensions: H: 1925 mm, Depth: 950 mm, Width: 1260 mm

Year of construction: 2015, condition: ready for operation (used), Wittmann MAS 3 Granulate Mill Cutter Mill Granulator Plastic 2015 Grinding chamber: 325mm x 190mm Cutting motor: 4 kW Year of manufacture: 2015 Weight: 250 kg Serial number: WTM7060 You are welcome to arrange an on-site inspection. We can organise cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided that a valid VAT ID number is supplied. Subject to prior sale. Bsdpfx Aeyw Ihqsmislh Visit our shop to see our other offers. Specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviation from technical data and errors in the description of the item may occur and are reserved.

Year of construction: 2021, condition: ready for operation (used), Wittmann G-Max 33 Granulate Mill Shredder Mill Granulator Plastic 2021 Grinding Chamber: 460mm x 235mm Cutting Motor: 4 kW Year of Manufacture: 2021 Weight: 335 kg Ground Material Container: 16 liters Rotor Diameter: 220mm Bsdoyw If Aepfx Amiolh You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and browse our other offers. All brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data and errors in the item description may occur and are subject to change.

Year of construction: 2023, operating hours: 5 h, condition: like new (used), functionality: fully functional, cutting length (max.): 105 mm, number of blades: 12, rotor diameter: 300 mm, machine/vehicle number: 20711, GETECHA Granulator / Beside-the-press Grinder (Version A 2.2.2) Application: Professional beside-the-press or small central granulator for recycling sprues and medium-sized plastic parts. Features an elevated frame for easy material discharge into bags or containers. Technical Specifications: Cutting System: Rotor diameter: 300 mm Cutting length: 105 mm Number of rotor knives: 10 (HSS) Number of stator (fixed) knives: 2 Blsdpfx Asyv A A Tsmijh Cutting type: Scissor-cut geometry (reduces dust, noise, and energy consumption) Rotation speed: approx. 230 rpm Performance: Throughput: approx. 80 kg/h (depending on material and screen size) Screen: 6 mm (round perforation) Drive & Power: Motor power: 5.5 kW Electrical supply: 3 x 400 V + N, 50 Hz Dimensions & Weight: Chamber inlet opening: 450 x 335 mm Weight: approx. 420 kg Finish: RAL 7035 (Grey) / RAL 5015 (Blue) Configuration Features (Version A 2.2.2): High-Stand Design: Elevated frame construction for ergonomic material discharge. Manual Feed Hopper: Sound-insulated hopper with a large inlet opening (450 x 360 mm). Discharge System: Gravity outlet optimized for regrind bags or collection bins. Key Advantages: Superior Cutting: The 10-blade scissor-cut rotor ensures high-quality regrind with minimal fines. Easy Maintenance: Quick-access design for fast sieve changes and blade adjustments, ideal for frequent material or color changes. Wear Protection: Optional wear-resistant coating available for processing glass-fiber (GF) reinforced materials.

Year of construction: 2023, operating hours: 5 h, condition: like new (used), functionality: fully functional, cutting length (max.): 75 mm, number of blades: 8, rotor diameter: 180 mm, machine/vehicle number: 20710, GETECHA Beside-the-Press Granulator / Plastic Grinder Model: Series A 5.10.1 (Compact Granulator) Application: Immediate recycling of sprues and rejected parts, designed for beside-the-press operation or small central grinding tasks. Bljdpfoyv Avgox Amijh Technical Specifications: High-performance German-engineered granulator characterized by a robust design and high-precision cutting geometry. Engineered for low-noise and low-dust material processing. Cutting System: Rotor diameter: 180 mm Cutting length (blade length): 75 mm Number of rotor knives: 7 (HSS quality) Number of stator (fixed) knives: 1 Rotor speed: 270 rpm (optimized for material quality and noise reduction) Performance & Sieve: Maximum throughput: Up to 35 kg/h (depending on material type and screen size) Screen: 6 mm standard (round perforation) Drive & Power: Motor power: 2.2 kW Power supply: 3 x 400V +N, 50Hz Inlet Dimensions: Cutting chamber inlet: 285 x 200 mm Manual feed hopper inlet: 337 x 310 mm Configuration & Features (Version A 5.10.1): Hopper: Specially sound-insulated hopper designed for manual feeding. Mobility: Mobile unit mounted on four casters (two equipped with parking brakes). Material Collection: 5-liter regrind bin featuring a left-side suction port (ø 38 mm) for direct connection to a vacuum conveyor/loader. Finish: Original GETECHA industrial coating in RAL 7035 / RAL 7011. Key Advantages: Versatility: Suitable as a dedicated beside-the-press unit or a small central granulator for technical parts. Durability: Equipped with HSS rotor knives for extended service life; optionally available in a reinforced version for glass-fiber (GF) reinforced plastics. Maintenance Friendly: Superior accessibility for rapid cleaning, sieve changes, and knife adjustments, minimizing downtime during material/color changes.

Year of construction: 2023, condition: excellent (used), Thermogranulator consisting of extruder, water bath, and granulator. Compact version design. Melt pressure control for regulating the extruder speed and adapting the granulator speed according to the melt pressure. Suitable for producing granulate that matches virgin material in terms of geometry and flow properties. Bjdpfxoyrmq Sj Amijlh