Ares Servitec, S.L.U.

Condition: good (used), Year of construction: 2008, pressing force: 30 t, Baler presses, Bramidan, 4-x 30 SLD, 30 tons pressing force – used - : Price ex location: only €3,950 (net) Manufacturer: Bramidan Model: 4-x 30 SLD Number: PEY297206-3 Year of manufacture: 2008 H: 2300mm / W: 1800mm / D: 1500mm Weight: 1,850kg 3x230/400V, 25/16 Amp, 4kW Condition: good (the photo with the warning tape is simply to indicate that the press is not being used anymore as a new, larger one has been purchased) Dodpfxeyzcvws Aaascf Available: immediately Location: Husum Operating manual available

Condition: excellent (used), Year of construction: 2000, HSM baler type HSM 45 VL Djdpfeyy Ncbsx Aaajcf

Condition: excellent (used), Year of construction: 2023, operating hours: 12 h, functionality: fully functional, machine/vehicle number: 630207349, HSM V-Press 825 Plus Pro – barely used, only 16 bales pressed For sale is an HSM V-Press 825 Plus Pro in exceptionally low-use condition. The machine has produced just 16 bales in total and is therefore practically as good as new. Dcodpfx Ajyy Ddasaasf Ideal for businesses seeking a high-quality baler without paying the price of a new machine.

Condition: ready for operation (used), Year of construction: 2022, Baling press for waste paper, paper, film, plastic, and other recyclable organic materials. Manufacturer: HSM Model: V-Press 825 plus pro - TCS system (TorsionControlSystem) – platen parallelism control Dodpfeyyy Dpex Aaaocf - Automatic start/stop when doors are closed - Display + bale and operating hours counter - Manual tie-off (4 polyester straps) - Sliding door with handwheel locking mechanism Machine dimensions: 1700 x 1250 mm, height: 2370 mm Loading aperture: 1195 x 540 mm Bale weight: up to approx. 280 kg Bale dimensions: approx. 1200 × 780 × 700 mm Throughput: approx. 2–5 bales/h Year of manufacture: 2022 Pressing force: 250 kN Motor power: 4.0 kW Machine weight: 1200 kg

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 V Dcedjyyk Tzepfx Aaaef Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening: 119.5 cm × 65 cm Condition: very good! Video of the machine in operation available upon request.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, year of last overhaul: 2026, Equipment: documentation/manual, HSM VK 4812 P Year of production: 2017 Fully automatic baler. The device has service and maintenance work by an authorized HSM service with a branch in Germany. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Dcodpfx Aeyyi Sveaajf We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: ready for operation (used), Year of construction: 2012, Brand: HSM Model: V-press 860 plus Dsdoyx Uypjpfx Aaascf Year of manufacture: 2012 Press force: 532 kN Voltage: 400 V Max. bale weight: 480 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2,083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Filling opening dimensions: 120 cm x 65 cm Condition: very good! Functionality checked. Video of the machine in operation available on request. FLITS Rental & Sales service: With each machine, we supply a bundle of binding wire (120 wires). Need more bundles? Request a non-binding quote.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 370 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Djdpfx Aaoyx Am Deaecf Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: good (used), Year of construction: 1984, functionality: fully functional, pressing force: 43 t, bale width: 800 mm, bale height: 800 mm, bale weight: 250 kg, power: 18.5 kW (25.15 HP), The machine is available immediately and has been in storage for a few weeks. It was fully operational prior to storage. The machine is equipped with 4 horizontal binding wires. Djdpfeyxp Etsx Aaaocf

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, pressing force: 60 t, bale weight: 450 kg, Equipment: documentation/manual, DIXI 60 SLD horizontal press baler 2012 year of production Press checked by service / new hydraulic cylinder installed. Semi-automatic 60 ton press system for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra Packs foils Foams PET bottles Insulating mats Dcsdpfxjyw Hz No Aaaef and other compressible materials. Machine dimensions L x H x W approx. mm: 4150 (5080) x 1725 x 2035 Filling opening W x H (standard) mm: 990 x 1110 Machine weight approx. kg: 5420 Pressing force max. kN: 60 t / 600 kN Ironing cycle (average value) approx. s: 47 Bale size W x H x L approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370-410 Binding: manual Number of ties: 3, with wire Drive power: 7.5 kW; 400V/32A Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 70 t, bale weight: 600 kg, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Pressing force: 700 kN Specific pressing force: 58 N/cm² Dcsdpfx Ajyvztweaaef Drive power: 10.5 kW Voltage / frequency: 400 V / 50 Hz Idle capacity (theor.): 42.97 m³/h Loading opening width x length: 890 x 1020 mm Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Bale weight: 600 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 00128-0010-01, total width: 2,000 mm, This used Bollegraaf chain conveyor is being sold by Bollegraaf Recycling Solutions and is offered in combination with an extra-strong pre-press for large cardboard boxes and octabins. The chain conveyor is of the type Bollegraaf HBT 2250/2000. The corresponding extra-strong pre-press for large cardboard boxes and octabins is also equipped with a so-called wirbulator. Technical specifications chain belt conveyor: Manufacturer: Bollegraaf Type: HBT 2250/2000 Year of construction: 2008 Drive power: 7.5 kW Length of feed belt: 8,300 mm Dodpeyu Stkjfx Aaaecf Length of inclined belt: 19,250 mm Length of swan neck: 2,400 mm Inclination angle: 30° Effective width: 1,960 mm Feed belt sidewall height: 500 mm Inclined belt sidewall height: 800 mm Weight: 16 t

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Dodpjyuyg Sjfx Aaaecf Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Wire coils platform : Not included.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 15,547 h, functionality: fully functional, machine/vehicle number: W99-031.010, pressing force: 60 t, pressure: 250 bar, power: 30 kW (40.79 HP), year of last overhaul: 2024, Equipment: documentation/manual, This used baler is being sold by Bollegraaf Recycling Solutions. This is an HBC60 (30kW) baler with vertical binding. Dsdpfx Aeyux Nxsaaecf This baler can be viewed in our overhaul workshop. This baler has only 15,547 hours. Technical condition is very good! (the baler has only baled paper) This baler comes with the following options: * intermediate hopper + distributor * belt feed chute * bale discharge, * wire roller platforms

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 80 t, DIXI 80 SLD horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Djdpfjyuxv Eex Aaajcf Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: good (used), Year of construction: 2011, functionality: fully functional, Available from June 2026 Baler Presto HPK 50 BS, year of manufacture 2011, with Whirbulator and optional Horstmann chain belt conveyor Manufacturer: Presto Model: HPK 50 BS Year of manufacture: 2011 Drive: 30 kW Pressing force: 50 t Feed opening: 1600 x 1050 mm (L x W) Channel cross-section: 700 x 1100 mm Maximum feed volume: 1.23 m³ Cycle time: 19 s Tying: 4-fold Throughput capacity at 35 kg/m³: 6 t/h 60 kg/m³: 9.6 t/h Dodpjyub Drefx Aaaecf 100 kg/m³: 13.9 t/h Bale weight: up to 500 kg Machine dimensions: 8500 x 1700 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Chain Belt Conveyor Data Manufacturer: Horstmann Model: PK 1100/11 Year of manufacture: 2011 Belt width: 1100 mm Speed: approx. 0.2 m/s (max. 0.3 m/s) Feed length: approx. 3000 mm Incline section: approx. 5000 mm Gooseneck: approx. 1000 mm The baler is still in operation and can be inspected under working conditions. It will be available from early June 2026. Please note: All technical data is based on information from the manufacturer. We do not assume any liability for the specifications provided or for any errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: PVB330354, pressing force: 5 t, filling opening width: 1,000 mm, filling opening length: 500 mm, bale length: 1,000 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 120 kg, type of input current: three-phase, input voltage: 230 V, input current: 10 A, overall weight: 600 kg, transport height: 2,370 mm, power: 1.1 kW (1.50 HP), transport width: 1,350 mm, transport length: 900 mm, input frequency: 50 Hz, Baling press, previously used for film Dedsyt R Rxopfx Aaaecf

Condition: good (used), Year of construction: 2017, functionality: fully functional, Baler Dixi 80 SLD with lifting/tipping device, semi-automatic, year of manufacture 2017 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2017 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Throughput capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: paper, cardboard, film The baler is in good condition. It has been checked and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data is based on manufacturer specifications. We accept no liability for the information provided or for potential errors. Dsdpfx Aoyt Hl Sjaajcf This offer is subject to prior sale and change without notice. Inspection is possible by arrangement. Sale is ex works, advance payment, without warranty or guarantee.

Condition: good (used), engine 2,2 kW, press force 20 t, bale weight 200-250 kg, Machine Dimensions Height: 2440mm Width: 1185mm Length: 2480mm, Loading Aperture 1100mm x 700mm, Machine Weight 1565 Kg Dodpeyti H Sefx Aaaecf

Condition: excellent (used), Year of construction: 2019, operating hours: 141 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus B, year of manufacture 2019 Technical specifications: Manufacturer: HSM Model: V-Press 860 plus B Year of manufacture: 2019 Operating hours: 141 Pressing force: 60 t Drive power: 4 kW Filling opening: 1500 x 651 mm Filling height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Binding: manual Theoretical cycle time (idle): 25 s Theoretical output: 32.5 m³/h Dimensions: 2099 x 1245 x 2985 mm (W x D x H) Weight: 2340 kg Materials: Film, paper, cardboard Please note: All technical data is based on manufacturer information. No liability is assumed for the accuracy of the data or possible mistakes. Dcsdpfx Asyr Dp Eoaaof All offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment term is 100% advance payment.

Condition: good (used), Year of construction: 2012, The pre-shredder (upper section) is not included in the offer. Only the lower part is offered. Paper baler / baling press PRESTO CC 40 V Manufacturer: PRESTO GmbH & Co. KG Machine type: CC 40 V Machine number: 28074 Dcodpfx Aajyrt T Teasf Year of manufacture: 2012 Empty weight: 4,200 kg Max. operating pressure: 260 bar Protection class: IP55 Rated current: 30 A Rated voltage: 400 V, 50 Hz Rated output: 15 kW Electrical connection: 35 A gG Machine type: horizontal baling press for paper and cardboard

Condition: used, Year of construction: 2005, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Price: On request - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 308 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Dodpfx Ajyrtcusaaocf

Condition: excellent (used), Year of construction: 2019, operating hours: 433 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus, year of manufacture 2019 Technical specifications: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2019 Operating hours: 433 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Djdpfxsyrngns Aaaecf Theoretical cycle time (idle): 25 s Theoretical press capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: Film, paper, cardboard, punching waste, textiles, big bags, polystyrene Remarks: The baler is in very good condition. Please note: All technical specifications are based on the manufacturer's information. We accept no liability for the accuracy of the data provided or for any errors. Offers are subject to change, prior sale reserved and may be withdrawn at any time. Inspection by appointment possible. The sale is ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: excellent (used), Year of construction: 2019, operating hours: 311 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus, year of manufacture 2019 Technical specifications: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2019 Operating hours: 311 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theoretical cycle time (idle): 25 s Theoretical output: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: film, paper, cardboard, punching waste, textiles, big bags, styrofoam Note: The press is in very good condition. Please note: All technical data is based on information provided by the manufacturer. We do not assume any liability for the information given or for any possible errors. All offers are non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by arrangement. The sale is ex-location, without warranty or guarantee. Our payment terms: 100% advance payment. Dedpfx Aajyrnfkjaecf

Condition: excellent (used), Year of construction: 2014, operating hours: 8,900 h, machine/vehicle number: LP50VH2, 1) Technical specifications Press with conveyor Technical data baler: Manufacturer Presona Typ LP 50 VH2 Year of construction 2014 Press power main press 50 tons Specific press force 63 N/cm2 Feed channel 1,500 x 1,100 mm Filling volume 2,7 m3 Theoretic throughput capacity 730 m3/hour Throughput capacity under operating conditions 340 m3/hour Bale size 1,100 x 720 mm, lenght variable Drive power 45 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a • bulk weight of 30 kg/cbm 8 up to 10 tons/hour • bulk weight of 50 kg/cbm 11 up to 13 tons/hour • bulk weight of 100 kg/cbm 15 up to 22 tons/hour Bale density (paper, newspaper) 400 up to 550 kg/m3 Djdpfxoyrhi Ne Aaaecf Filling volume hydraulic oil tank 600 l Weight baler 16 tons netto Scope of delivery: Press, electrical cabinet, control panel, chain conveyor The documentation (operating manual, CE declaration, electrical/hydraulic diagram) is complete. Visiting is possible by appointment. We are not responsible for technical information or any errors. Upon request, we can send video materials of the working press