Gerd Wolff Maschinenfabrik

Condition: good (used), total height: 890 mm, Tension tower, manufactured by Lang Hjdoz E Sahepfx Aazsu 192 x 192 mm square Height 890 mm or 860 mm, excluding adapter plates Base plate 384 x 384 mm Weight approximately 200 kg Several of these tension towers are available.

Condition: ready for operation (used), Year of construction: 1985, Immediately available, free of encumbrances: L & Z lathe, Elliott Type Concord 460 Year of manufacture 1985 Swing over bed 550 mm Swing over cross slide 310 mm Turning length 1000 mm Spindle bore 71 mm Drive power 7.5 kW Spindle speeds 10 – 1000 rpm Coolant system Chuck Tool holder with inserts Weight 2.5 tons Hsdez En Nxopfx Aazeu Price: EUR 1,750.00 plus VAT, ex works.

Condition: used, functionality: fully functional, CNC ROTARY TABLE Hodpfx Ajzzwkmoazju 2000 X 2500 MM TABLE TRAVEL: 2500 MM LOAD CAPACITY: 20 TONS INDEXING: 360,000 POSITIONS

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm Hedpjzzvz Refx Aazou 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: used, Cast iron bed Length: 3650 mm Width: 1370 mm Thickness: 150 mm 11 T-slots - dimensions 32 x 18 mm Slots spacing: 125 mm Assembly in 2 parts Dimensions of each part: L 1820 mm x W 1370 mm x H 150 mm Hodjzzvzdspfx Aazeu Total height on base 875 mm Weight: approx 4 T

Condition: used, Cast bed Length: 2410 mm Hodpfxszzvyyj Aazju Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Hedpfx Aezzvytsazou Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, functionality: fully functional, overall weight: 5,000 kg, plate width: 1,200 mm, plate length: 1,200 mm, Equipment: type plate available, AMF Zero Point System – Clamping System with Zero Point Clamping Plates, Consoles, Hydraulic Unit, and Accessories Manufacturer: AMF System: Zero Point System Year of Manufacture (Components): Primarily 2013 / 2014 Offered is a comprehensive AMF Zero Point clamping system from industrial use. The system consists of several hydraulic zero point clamping plates, zero point clamping consoles, round changeover and clamping plates, intermediate flanges, adapter elements, an AMF high-pressure hydraulic unit, and extensive AMF clamping and system accessories. The components come from a cohesive clamping and machining system and are suitable for creating flexible workpiece, fixture, and pallet clamping systems on machine tools and machining centers. Individual sale of the components is possible. The existing system includes, among other things: - 1 × AMF Hydraulic Unit, Part No. 515841 - 1 × Large quantity of AMF K20 Zero Point Clamping Modules and System Accessories - 2 × Hydraulic AMF Zero Point Clamping Plates approx. 1,200 × 1,200 mm - 2 × Sets of AMF Zero Point Clamping Consoles, each with 4 stations and a total of 8 K20 clamping modules each - 1 × Clamping Plate Ø 650 mm / 8 Clamping Slots - 1 × Clamping Plate Ø 650 mm / 16 Clamping Slots - 1 × Clamping Plate Ø 1,000 mm / 8 Clamping Slots - 1 × Intermediate Flange / Changeover Table Ø 800 mm - 1 × Semi-circular Clamping Device - Several intermediate and adapter rings - 1 × Large Intermediate Flange / Clamping Device Ø approx. 1,250 mm Hedpfx Aaezx Akaezju - Various AMF Clamping Modules, Clamping Studs, Height Elements, Couplings, and Hydraulic Lines - Existing technical documentation Key Technical Data: Hydraulic Unit AMF - Part No.: 515841 - Manufacturer No.: 0113 0469 - Operating Pressure: 40–400 bar - Flow Rate: 2.5 l/min - Supply: 400 V / 50 Hz - Motor Power: 1.1 kW - Separate cable-connected control unit - Hydraulic connections with quick-release couplings AMF Zero Point Stations 1,200 × 1,200 mm - Hydraulic actuation - K20 Zero Point Clamping Modules - Operating Pressure: 50–60 bar - Dimensions: approx. 1,200 × 1,200 mm - Weight: approx. 423–424 kg per plate - Years of Manufacture: 2013 / 2014 AMF Zero Point Clamping Consoles - 4 stations per set - 2 K20 clamping modules per station - A total of 8 K20 clamping modules per set - Hydraulic actuation - Operating Pressure: 50–60 bar - Console Height: approx. 143 mm Changeover and Clamping Plates Various designs with: - Ø 650 mm - Ø 800 mm - Ø 1,000 mm - Ø approx. 1,250 mm - Radial T-slots - AMF Zero Point Clamping Modules - Underside clamping studs - Various adapter and mounting options Condition: Used, industrial condition. The components show the usual signs of wear, clamping, mounting, and storage. Some dirt, discoloration, and minor superficial corrosion marks are present. Some of the AMF system accessories are still in their original packaging or appear to be unused. A current functional, leak, or accuracy test of the hydraulic and pneumatic components has not been performed. Sale in the existing condition and scope of delivery as shown in the images. Inspection is possible by appointment. Individual sale is expressly possible.

Condition: used, Year of construction: 2005, functionality: unexamined, overall weight: 1,500 kg, total length: 1,250 mm, total width: 1,250 mm, plate height: 150 mm, plate width: 1,250 mm, plate length: 1,250 mm, Equipment: type plate available, FIBRO 4x Precision Changeable Pallet 1250x1250 mm / 1,500 kg / Pallet Changing System Description Manufacturer: FIBRO GmbH, Rotary Table Division Type: Precision Changeable Pallet 1,250 × 1,250 mm Year of Manufacture: 2005 Quantity: 4 pieces Package consisting of 4 solid FIBRO precision changeable pallets from an industrial pallet changing/rotary table system. The pallets were used as a machine interface and as a carrier for large workpiece clamping devices. These are not simple clamping plates, but precisely manufactured changeable pallets with indexing, pallet clamping, and integrated pneumatic transfer. Each pallet has a clamping surface of 1,250 × 1,250 mm and a weight of approximately 1,500 kg. The top surfaces have different, customer-specific hole patterns. The pallets are equipped on the underside with two mounted and aligned indexing rings each. The clamping slots have hardened strips as running and contact surfaces. In addition, each pallet has a pneumatic connection with one line. Hjdpfx Aajzxz Azszsu Technical Data - Quantity: 4 pieces - Dimensions per pallet: 1,250 × 1,250 mm - Height: approx. 150–160 mm - Weight: approx. 1,500 kg per pallet - Total weight of 4 pallets: approx. 6,000 kg - Pneumatic connection: 1 line per pallet - Indexing: P1 / P2 - Underside: 2 indexing rings per pallet - Clamping slots with hardened strips - Thread/hole patterns including M12, M20 and M30 - Customer-specific hole patterns - Original drawings or technical FIBRO documents available According to the manufacturer's data, the documented plan parallelism of the pallet top to the bearing surface is 0.025 mm, and the flatness is 0.040 mm. These are explicitly the original manufacturer's values and not a current measurement of the used pallets. Factory/Serial Numbers 1817739 / 002 1817739 / 003 1817739 / 004 1817739 / 005 The pallets have partially different article numbers and different customer-specific hole patterns. Accessories: The offer also includes the mechanical guide and rail set of the pallet changing system shown in the pictures, consisting of roller/guide rails, solid guide and support strips, stop and guide elements, and the existing fastening parts. Condition: Used condition from industrial application. The clamping surfaces show corresponding machining, clamping and wear marks, as well as some discoloration and superficial corrosion marks. The existing hole patterns originate from the original application. A current metrological check of the geometric accuracy has not been carried out. Sold in the existing condition and scope of delivery as shown in the pictures.

Condition: good (used), Year of construction: 2001, overall weight: 8,500 kg, total height: 350 mm, total length: 5,000 mm, total width: 2,500 mm, plate height: 350 mm, plate width: 2,500 mm, plate length: 5,000 mm, T slotted bed plate STOLLE - DTR MACH-ID 9790 Make: STOLLE Type: DTR Year: 2001 8 units Bilz Airsprings Model 1-ED Diameter 271 mm load each unit 3000 Kg Levelling adjustment true sensor  Pneumatic Hedpfx Aaozw E Hzozeu Floorplate Length: 5000mm Floorplate Width: 2500mm Height: 350mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 36mm Weight a plate approx.: 8500kg Number of matching pieces: 1 Length: 5000mm Width: 2500mm Height: 350mm Weight: 8500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, overall weight: 8,000 kg, total height: 370 mm, total length: 5,000 mm, total width: 2,250 mm, plate height: 370 mm, plate width: 2,250 mm, plate length: 5,000 mm, T slotted bed plate STOLLE - RDT MACH-ID 9791 Make: STOLLE Type: RDT Year: 1990 12 units Bilz Airsprings Model 1-ED Diameter 271 mm load each unit 3000 Kg Levelling adjustment true sensor  Pneumatic Hjdpfx Aaszw E A Nezou Floorplate Length: 5000mm Floorplate Width: 2250mm Height: 370mm No. Of T-slots: 7 Distance from T to T-slot / Jump:320mm T -slot size: 41mm Weight a plate approx.: 8000kg Number of matching pieces: 1 Length: 5000mm Width: 2250mm Height: 370mm Weight: 8000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, overall weight: 3,900 kg, total height: 300 mm, total length: 3,520 mm, total width: 2,000 mm, plate height: 300 mm, Floorplate Length: 3520mm Floorplate Width: 2000mm Height: 300mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 3900kg Hedpfx Ajzw Ezrsazsu Number of matching pieces: 1 Length: 3520mm Width: 2000mm Height: 300mm Weight: 3900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2020, overall weight: 32,000 kg, total height: 450 mm, total length: 8,000 mm, total width: 4,000 mm, 10 units CFM Schiller Air Spring levelling system GRB 780 MD Load 7900 Kg each Air Spring Stiffness 770 N/mm Controller CFM LC 300 Very little used, new price EUR 200.000     Floorplate Length: 4000mm Floorplate Width: 2000mm Height: 450mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 8000kg Number of matching pieces: 4 Length: 8000mm Width: 4000mm Hodpfezw Eyzsx Aazju Height: 450mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, Cast iron clamping plate, STOLLE GAP 900, year of manufacture approx. 2000. Dimensions: Length 1500 mm, width 900 mm, height 100 mm, weight approx. 1000 kg. Longitudinal grooves for T-slot nuts M16. Hsdpezu N Ukofx Aazeu In good condition.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, overall weight: 300 kg, LANG Clamping Tower 70850 with Grid Plates 75710 and Arbor Clamps 48155-125 2 towers with plates and arbor clamps are available! We offer a high-quality LANG Clamping Tower 70850 with matching Grid Plates 75710 and Arbor Clamps 48155-125. This clamping system is ideally suited for precise and efficient 5-axis machining as well as multi-sided machining on CNC machining centers. Technical data: Manufacturer: LANG Technik Type: Clamping Tower 70850 Accessories: 8 x Grid Plate 75710 Clamping system with grid hole pattern Hsdpfxeztzi Re Aazsu High repeatability Robust design for industrial use Ideal for automated manufacturing and setup time optimization Condition: Used, technically perfect. Normal signs of wear and tear consistent with age and use. Scope of delivery: 1 x LANG Clamping Tower 70850 8 x LANG Grid Plates 75710 4 x Arbor Clamps 48155-125 The clamping tower enables optimal use of the machine's working area and increases productivity by machining multiple workpieces in a single setup. Inspection possible by appointment. Shipping or collection by arrangement.

Condition: good (used), Siegmund System Perforated Grid Table incl. Silverline Profile Machining Station For sale is an extremely robust, combined industrial workstation designed for metalworking, jig construction, or precision profile manufacturing. The system is composed of top-tier premium components: 1. Siegmund System Perforated Grid Table (Base) - High-precision, solid welding and clamping table from the global market leader, Siegmund; highly resistant to distortion. - The perforated grid system (including perforations on the side panels) allows for the flexible and highly repeatable positioning of stops, clamping bolts, and angle brackets. 2. Silverline Clamping & Machining System (Superstructure) - Solid superstructure featuring precision linear guides for longitudinal movement. - Two parallel-mounted yellow motor heads (milling/drilling units) for simultaneous or sequential machining operations. - Three heavy-duty horizontal clamps secure workpieces firmly against the stops—ensuring rock-solid stability while protecting the material. 3. Convenient Pneumatic Control System - Ergonomic control panel at the front featuring a numbered 5-lever control system. - Selective control of individual pneumatic cylinders. - Integrated analog pressure gauge (manometer) and safety emergency stop switch. - Powerful central electric motor driving the mechanical/hydraulic systems. "A complete solution from a single source: We would be happy to offer suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—both new and used—in our shop! International shipping costs available upon request! Hedpfsztawgjx Aazeu

Condition: excellent (used), overall weight: 5,700 kg, total height: 300 mm, total length: 4,000 mm, total width: 2,000 mm, T slotted bed plate STOLLE - DT MACH-ID 9776 Make: STOLLE Type: DT Floorplate Length: 4000mm Floorplate Width: 2000mm Height: 300mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 27mm Weight a plate approx.: 5700kg Number of matching pieces: 2 Length: 4000mm Width: 2000mm Height: 300mm Hodpfezrl Etex Aazsu Weight: 5700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), overall weight: 10,000 kg, total height: 400 mm, total length: 6,280 mm, total width: 2,100 mm, T slotted bed plate STOLLE - SDT MACH-ID 9775 Make: STOLLE Type: SDT Floorplate Length: 6280mm Floorplate Width: 2100mm Height: 400mm No. Of T-slots: 7 Distance from T to T-slot / Jump:300mm T -slot size: 35mm Weight a plate approx.: 10000kg Number of matching pieces: 1 Length: 6280mm Width: 2100mm Height: 400mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hodpfx Aajzrl A Sszou

Condition: used, Description: * Due to changes in our milling operations and production restructuring, we are selling a grid plate/clamping plate and a clamping angle on short notice. * Grid plate/clamping plate: Dimensions: 1,000x800x45mm Bore spacing: 40x40mm Clamping thread: M12 Clamping sleeve: d12F7 * Clamping angle with grid plates: Base area: 350x280x40mm Angle height: 350mm 2x grid plates: 350x280x25mm * Important: For logistical reasons, we only sell within Europe. * "The seller excludes any warranty for the purchased goods. The goods are sold in their current condition, without any guarantee as to their suitability for a particular purpose or their freedom from defects. The buyer confirms that they have inspected the goods before purchase and are satisfied with their condition. The seller assumes no liability for damages resulting from the use of the goods. Any claims by the buyer against the seller are excluded." * Also available for individual sale. Hedpezp Hnqsfx Aazeu Date: 18.08.2026 * Price for plate and angle: €1,200 (negotiable) * I am available at any time to answer questions and provide further information.

Condition: excellent (used), Plate size: 1500 x 1500 mm Hedozn I Uispfx Aazju Plate height: 100 mm Table height above floor: 950 mm Material thickness, approx.: 11.5 - 13 mm Bore diameter: 16 mm Weight, approx.: 397 kg

Condition: used, plate width 4000 mm plate depth 2500 mm plate height 300 mm weight 6,2 kg STOLLE Clamping Plate / Clamping Bed 4000x2500x300 mm L x W x H: 4000 x 2500 x 300 mm Total area (for 2 plate sections): 20 m² T-slot dimensions: 28 x 48 mm (slot width x depth) Plate thickness: 110 mm Number of slots: 10 Edge distance: 124 mm T-slot spacing: 250 mm Note: I am offering one clamping plate for sale. A second, identical clamping plate with the same dimensions is also available. Both plates are exact matches and can be joined together if required to create a larger clamping surface. The second clamping plate is also available upon request. Hedpfozl Hcgsx Aazju Please feel free to contact me if you are interested in both plates or have questions regarding their combined installation.

Condition: used, plate width 4000 mm plate depth 2500 mm plate height 300 mm weight 6,2 kg STOLLE Clamping Plate / Clamping Bed 4000x2500x300 mm L x W x H: 4000 x 2500 x 300 mm Total area (for 2 plate sections): 20 m² T-slot dimensions: 28 x 48 mm (slot width x depth) Plate thickness: 110 mm Number of slots: 10 Edge distance: 124 mm Hsdpfxjzl Hcaj Aazsu T-slot spacing: 250 mm Note: I am offering one clamping plate for sale. A second, identical clamping plate with the same dimensions is also available. Both plates are exact matches and can be joined together if required to create a larger clamping surface. The second clamping plate is also available upon request. Please feel free to contact me if you are interested in both plates or have questions regarding their combined installation.

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Mounting plate: Test plate with support ribs -Clamping surface: 300 x 200 mm -Sheet thickness: 10 mm -Plate: with supporting ribs -Transport dimensions: 446/200/H74 mm -Weight: 11 kg Hedpfozldm Nsx Aazju

Condition: good (used), 2 pcs. AMF grid panel, 415 mm x 740 mm, height 50 mm. Hsdpfx Asziwzhsazsu Grid: 40 x 40 mm, with 16 H7 pilot holes and M12 threads. With cast support under the panel, height 100 mm.

Condition: used, Item No. 16191 T-slot plate Technical data: - Plate length approx. 3000 mm - Plate width approx. 2000 mm - Plate height approx. 310 mm - Thickness of the top plate approx. 70 mm - 8 T-slots in the table surface, length 3000 mm - Center distance of the T-slots in the table surface: 250 mm each - Center distance of the T-slots from the outer edge: 125 mm - T-slot width approx. 21 / 31 mm - T-slot depth approx. 30 mm - 4 adjustable support feet - Space required: L 3000 x W 2000 x H 810 mm Hedpfx Aaszibw Hjzeu - Weight approx. 4200 kg