Corzo Maquinaria Industrial, S.A.U.

Condition: excellent (used), Year of construction: 2001, spindle bore: 150 mm, spindle motor power: 95,000 W, total height: 3,800 mm, total length: 16,000 mm, total width: 5,000 mm, overall weight: 80,000 kg, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm DBC Turning Length: 8000mm Spindle bore: 150mm Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Height: 3800mm Weight: 80000kg Itjdpjz Sy Twsfx Acpen Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2008, turning diameter 246 mm turning length 445 mm control Siemens 840D spindle speed 6.000 U/min rapid traverse Z-axis 30 m/min rapid traverse X-axis 24 m/min tailstock travel 450 mm max. weight between the centers 110 kg total power requirement 24 kVA weight of the machine ca. 3,95 t dimensions of the machine ca. 3,05 x 1,65 x 1,75 m CTX 310: - Powered tools with C-axis - Tailstock Working area: - Machine bed length: 1,625 mm - Center height: 365 mm Tailstock: - Max. tailstock force: 400 daN Itodjz St N Eepfx Acpen Tool holders: - Number of tools: 12 - Tool holder: VDI 30

Condition: used, Year of construction: 2005, Geminis GHT4 - 720 x 2000 CNC Centre Lathe with Fanuc Series 21iTB CNC Control, Distance between Centres 2000mm, Swing Over Bed 720mm, Swing Over Cross Slide 470mm, Spindle Bore Diameter 104mm, Spindle Speeds to 1600rpm. Max Workspiece Weight Between Centres 2560kg, Tailstock with 6MT, Main Motor Power 20.5kw, Fixed Steady, Swarf Conveyor, Various Tool Post Holdwers. S/No. 12029 (2005) Machine Size 2600mm x 2385mm x 1765mm, Weight 4100kg Location: This lot is located in Scotland, UK. A charge of £800 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Ijdoz Rnxlspfx Acpjtn

Condition: good (used), Year of construction: 2018, 0 40 kW air pressure 5 bar range L-W-H 2850 x 2470 x 2290 mm weight 7.000 kg External grinding, internal grinding, hard turning, measurement DVS UGrind – Incredibly impressive. – Efficient complete machining with grinding, turning and measuring tools on a single multifunctional head – Ideal for small to medium batch sizes of shafts and chuck components with a centre-to-centre distance of up to 1,200 mm – Machine bed made of natural granite for high dynamic and thermal rigidity – Consistently precise machining results thanks to a hydrostatically supported tailstock – Faster achievement of targetdimensions thanks to the intuitive DVS UCee operating system – Footprint of just 7 or 8.5 m²,including coolant system. --> BUDERUS, Type: U-Grind 800 --> Control system: Bosch Rexroth MTX, IndraControl L45.1, 15" display --> Centre distance: 1.200 mm --> Max. outer diameter: 350 mm --> Max. workpiece weight between centres: 50 kg - Cross slide: X-axis - --> max. travel: 500 mm --> max. speed: 30 m/min --> resolution: 0.1 µm - Longitudinal slide: Z-axis - --> max. travel: 800 mm --> max. speed: 30 m/min --> Resolution: 0.0005 – 0.1 mm - Multifunction head (B-axis) - --> Swivel range: -45° to +225° --> Swivel time for 180°: Positioning accuracy: 0.0002° --> Repeatability: 1" --> Resolution: 0.001° - External machining - --> Max. machining length: 750 mm --> Peripheral speed: 50 corundum / 80 CBN --> Drive power: 15 kW --> Max. wheel dimensions: Ø400 x 50 x 152.4 mm - Internal machining - --> Max. bore diameter: 250 mm --> Max. bore depth: 235 mm --> Drive power S1: 1.8 – 7.5 --> Speed range: 30.000 to 50.000 rpm - Workpiece spindle C-axis - --> Max. speed: 1.500 rpm --> Drive power: 1.8 kW --> Drive torque: 90 Nm --> Measuring system resolution: 0.001° --> Roundness accuracy: 0.8 µm --> Positioning accuracy: 0.0001° - Tailstock - --> Quill stroke: 50/80 mm --> Quill diameter: 60 mm --> Bearing: hydrostatic --> Fine adjustment for cylindricity corrections: ±40 µm - 3-point centre - --> Clamping range: Ø20 – Ø150 mm --> Coarse adjustment: 40 µm Iodpfx Ajz Ek Abecpetn --> Fine adjustment: 2 µm --> Feed rate: infinitely variable Highlights: > Complete machining in a single set-up. Turn whatever can be turned; grind whatever needs grinding. > Short set-up times, quick to programme – a machine that’s a pleasure to work with and gets the job done quickly. > Intuitive and ergonomic: good accessibility, crane loading, intuitive operation via touchscreen and ready-made programme modules. > Compact footprint thanks to integrated coolant treatment > Optional automation solutions: with our ULoad or a customised solution, for example from rbc robotics, the DVS UGrind can also operate fully automatically.

Condition: used, USED PARALLEL LATHE, 260x1500, GIANA. COVERED BEDS, 80MM BAR CAPACITY, 300MM SPINDLE. MACHINE REPAINTED AND OVERHAULED. Itodpfx Acsz Az Nmopsn

Condition: used, CNC LATHE TACCHI HD 3/140L - C-AXIS - Y-AXIS - SIEMENS 840 C CNC CONTROL DISTANCE BETWEEN CENTERS: 8000 MM MAXIMUM TURNING DIAMETER OVER BED: 2000 MM Iedpfx Aozzv Specpetn MAXIMUM TURNING DIAMETER OVER CROSS SLIDE: 1550 MM Y-AXIS TRAVEL: 500 MM SPINDLE BORE: 150 MM MILLING SPINDLE MOTOR POWER: 22 KW - 1800 RPM AUTOMATIC TURRET WITH 4 POSITIONS

Condition: used, Binns & Berry Trident E1000 Double Gap Bed Centre Lathe With Digital Readout System. Distance Between Centres 4500mm Swing Over Bed 1000mm. Swing in Gap 1500mm. Width of Gap 350mm. Spindle Bore 100mm. Spindle Speeds 4 - 1250rpm. Leadscrew 2 TPI. Dual Dials. Power to Saddle & Cross Slide. Bison 625mm Diameter 4 Jaw Chuck. Itedpfxozy Il Es Acpon Fixed 3 Point Roller Bearing Steady. Weight Approx: 9000KG

Condition: used, Year of construction: 2008, Chevalier FLC-2540 CNC Lathe CNC Lathe Chevalier Type/Model FCL-2540 Condition Used Year of Manufacture 2008 Technical Data Capacity Diameter over bed: Ø 630 mm Diameter over cross slide: Ø 400 mm Max. turning diameter: Ø 630 mm Distance between centers: 1,000 mm Spindle Spindle speed: 37 - 2,250 rpm (D1-8), optional 80 - 1,500 rpm / 10 - 800 rpm (A2-11) Spindle nose type: D1 - 8, optional A2 - 11 Spindle taper: 1/16, optional 1/20 Travel distances X-axis: 280 mm Z-axis: 850 mm Feed rate: 5,000 mm/min X-axis rapid traverse: 5,000 mm/min Z-axis rapid traverse: 8,000 mm/min X-axis spindle diameter: Ø 25 mm / 5 mm Z-axis spindle diameter: Ø 40 mm / 10 mm Tool turret Manual tool turret: 4-position Max. tool shank size: 25 mm Diameter: Ø 75 mm Tailstock Travel: 190 mm Taper: MK5 Isdpozx Up Uefx Acpjtn Motor Spindle motor: 15.5 kW Feed motor (X/Z): 1.4 kW Dimensions (L x W x H): 2,840 x 1,905 x 2,235 mm Net weight approx.: 3,350 kg Features: - Software: Siemens ShopTurn Accessories - 7 x Multifix C40/170 - 7 x Multifix C32/150 - Chuck Schunk Rota-S 319-92 - Chuck Schunk Rota-S 160-42 - Measuring probe - Steady rest - Drill chuck - Taper adapter for drills - Numerous drills (up to D=35) - Approx. 25 HSS cutting tools Request item: Transport costs will be provided in a separate quotation.

Condition: excellent (used), functionality: fully functional, spindle motor power: 100,000 W, total height: 2,900 mm, total length: 14,000 mm, total width: 3,500 mm, workpiece weight (max.): 16,000 kg, overall weight: 32,000 kg, distance table center to spindle nose: 8,250 mm, CNC Lathe HEYLIGENSTAEDT - NDC-710 MACH-ID 9801 Make: HEYLIGENSTAEDT Type: NDC-710 Control: R&D MTC3 4 Chuck 1400 mm Steady rest 3 units Ø 100-1050 Roller steady open 2 units Ø 1120 KNOLL Chip conveyor 2022 Boring bar Ø 260 x 3500 mm Boring bar Ø 200 x 1500 mm Boring bar Ø 150 x 1100 mm Iodpfx Acozx Srgspjtn DBC Turning Length: 8250mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1120mm Spindle power: 100kW Bed width: 850mm Tailstock spindle Ø: 250Ø Stroke pinole: 200mm Spindle taper: 80Mk Power: 100kW Speeds / ranges: 0,8 - 355Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 16000 Length: 14000mm Width: 3500mm Height: 2900mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1991, Control: Fanuc 15 Maximum turning diameter over bed: 1500 mm Itedpfx Aezwvp Tscpen Maximum turning diameter over carriage: 1200 mm Distance between centers: 7000 mm Spindle bore: 100 mm Spindle speed: 2.5 to 250 rpm Travel in X-axis: 560 mm Travel in Z-axis: 7200 mm Travel of tailstock: 350 mm Tailstock: MT 7, 260 mm diameter Main spindle motor: 37/45 kW AC Maximum workpiece weight between centers: 15000 kg Turret: 8 positions Steady rest 1: 100 to 150 mm diameter Steady rest 2: 300 to 600 mm diameter Machine weight: 35 tons The machine was originally designed with a C-axis and milling capabilities, but this function was never used, and therefore the machine is offered as a pure turning machine.

Condition: used, Year of construction: 2005, turning diameter 250 mm Itedpfozvq Dvox Acpon turning length 700 mm control FANUC weight of the machine ca. 3,35 t HAAS SL-30THE CNC Lathe – Manufactured in 2005 Technical Specifications - Max. turning diameter: 250 mm - Max. turning length: 700 mm - Number of axes: 2 - X-axis travel: 287 mm - Z-axis travel: 864 mm - Spindle bore: 69 mm - Max. spindle speed: 3,400 rpm - Tool turret: 12-station - Tool holder: VDI 40 - Power supply: 360–480 V, 3-phase, 50/60 Hz - Rated power: 22 kW - Max. connected load: 70 A - Full-load current: 40 A - CNC control: FANUC Features - 12-position tool turret - VDI-40 tool holder - Hydraulic chuck - Hydraulic tailstock - Chip conveyor - Coolant system - Full enclosure with safety interlock - Suitable for single-part and series production - Technical documentation

Condition: used, Year of construction: 2007, turning diameter 250 mm turning length 500 mm control FANUC tool taper VDI 40 Iedpfxjzvq Dij Acpstn weight of the machine ca. 3,0 t HAAS SL-20THE CNC Lathe – Year 2007 Technical specifications - Max. turning length: 500 mm - Max. turning diameter: 250 mm - Swing over bed: 584.2 mm - Swing over cross slide: 241.3 mm - Distance between centers: approx. 609.6 mm - X-axis travel: 214.6 mm - Z-axis travel: 508 mm - Spindle nose: A2-6 - Spindle bore: approx. 76.2 mm - Max. spindle speed: 4,000 rpm - Spindle motor power: 14.9 kW / 20 HP - Driven/live tool stations: up to 10 - Input voltage: 360–480 V - Power supply: 3-phase

Condition: repair required (used), Year of construction: 1985, functionality: limited functionality, machine/vehicle number: 11710519, spindle bore: 1,250 mm, spindle motor power: 56,000 W, quill travel distance: 1,000 mm, workpiece weight (max.): 1,600 kg, Equipment: documentation/manual, Basic machine information Machine type: CNC vertical lathe Manufacturer and model: Schiess AG - Schiess Moweg GmbH; Type 12DS100 Schiess Year of manufacture: 1985 Serial number: 11710519 Technical condition: Machine is operational; used, requires repair Technical specifications Working range: Table dimensions - Pallet D=1000 [mm], max. turning height H=800 [mm], max. turning diameter D=1250 [mm] Tailstock stroke S=1000 [mm]; adjustable cross slide - positioning every P=500 [mm] Table load capacity: 1600 kg Control system type: Siemens - Sinumerik 840 D Main drive power - 56 kW; Maximum spindle speed: 500 rpm Axis positioning accuracy: 0.02 [mm] - axis measuring system: optical scales Axis feed rate - "rapid": 6000 mm/min Axis feed rate - "working": 0.1 - 2000 mm/min Coolant - yes - through the tool Number of axes: 2-axis lathe Drive type: servo drives Additional equipment Tool magazine: 12 positions Material feeding system: loading station at the pallet magazine Palletizing system - 2-pallet magazine; pallet loading station; machine table - total of 2 pallets Chip transport system - yes Cooling system - control cabinet air conditioning - yes Itsdpfxezvnbxe Acpen Operating manual - paper version in Polish and German, digital version in German

Condition: excellent (used), Year of construction: 2014, operating hours: 367 h, functionality: fully functional, turning length: 2,845 mm, turning diameter: 1,150 mm, total height: 1,890 mm, total length: 6,740 mm, total width: 2,205 mm, workpiece weight (max.): 5,000 kg, overall weight: 9,170 kg, Equipment: documentation/manual, Hankook Protec 9NC 3000 Flat Bed CNC Lathe — 2014 Year: 2014 Machine: Hankook Protec 9NC 3000 Type: Flat Bed CNC Lathe Running Hours: 367 hours Ijdpfx Acozvgayepstn Available for sale is a 2014 Hankook Protec 9NC 3000 Flat Bed CNC Lathe, showing just 367 hours. The machine is supplied with all three steady rests, making this a very well-equipped machine and an excellent opportunity for anyone looking for a heavy-duty CNC turning centre with very low hours. Key Features Hankook Protec 9NC 3000 2014 model Only 367 hours ! Flat bed CNC lathe 3 x steady rests included 3 Jaw and 4 Jaw Chucks Heavy-duty construction Suitable for a wide range of turning applications Low-hour machine Safety platform included Turning diameter over bed: Ø1150 mm Turning diameter over carriage: Ø830 mm Maximum turning length: 2845 mm Spindle bore: Ø105 mm Maximum turning weight: 5000 kg A very clean, low-hour example of a Hankook Protec 9NC 3000, complete with all three steady rests. Contact us for further information, photographs, specifications or to arrange an inspection.

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 800 rpm, travel distance X-axis: 550 mm, travel distance Z-axis: 4,000 mm, spindle motor power: 15,000 W, total height: 1,700 mm, total width: 1,950 mm, overall weight: 9,600 kg, product length (max.): 6,900 mm, workpiece diameter (max.): 1,010 mm, number of slots in tool magazine: 4, number of axes: 2, Horizontal turning machine manufactured in 2017. This KEY EAST BV-40160 features a swing over bed of 1,010 mm and a distance between centers of 4,000 mm. It includes a front and rear chuck diameter of 500 mm, along with a digital readout for enhanced precision. If you are looking to get high-quality turning capabilities, consider the KEY EAST BV-40160 machine we have for sale. Contact us for further details. • Conventional flat bed lathe with 2 axes (X and Z) • Equipped with a compound slide featuring a glass scale, whose movement is calculated together with the Z-axis on the digital readout for improved positioning accuracy • Power Supply: 380 V • Frequency: 50 Hz Ijdpfx Ajzuxl Socpotn • Phase: 3 Ph • Center Height: 505 mm • Distance Between Centers: 4,000 mm • Front Chuck Diameter: 500 mm • Rear Chuck Diameter: 500 mm • Steady Rest: Included • Tailstock: Included • 4-Way Manual Tool Post: Included • Coolant System: Included • Lubrication System: Included • Machine Condition: Used Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), functionality: fully functional, turning length: 3,000 mm, turning diameter: 1,000 mm, spindle bore: 260 mm, spindle speed (max.): 800 rpm, travel distance X-axis: 3,000 mm, rotational speed (max.): 800 rpm, distance table center to spindle nose: 3,000 mm, Equipment: rotational speed infinitely variable, Gurutzpe A1000 x 3000mm lathe with Fagor 8037 CNC, equipped with a 3-jaw hydraulic chuck, 260mm spindle bore, 1000mm swing over the bed, 600mm swing over the cross slide, 260mm tailstock bore, 2 speed ranges of 0-800 rpm, rapid traverse on the X-axis at 8 m/min, rapid traverse on the Z-axis at 8 m/min, rapid traverse at 8 mpm, 140mm tailstock diameter, Morse 6 taper, 650mm bed width, 27 kW power, 12-ton weight. The lathe is in very good condition. Iedpfx Acoztz A Ropotn

Condition: used, Year of construction: 2013, Brand : GEMINIS Model : GT5 G2 1200x1000 Manufacture year : 2013 Cnc : SIEMENS 840D-SL Center height: 615 mm Swing over cross slide: 850 mm Swing over bed : 1200 mm Main spindle bore diameter: 104 mm Main spindle nose: DIN 55026-11 mm Spindle diameter on front bearing:150 mm Turning Speeds : 0-1400 rpm Spindle Ranges: 4 Headstock power: (S1/S6-60%) 30/37kw – (37/46kw Optional) Headstock torque: (S1/S6-60%) 4000/4850 Nm (4800/5950Nm) Guide width: 655 mm Isdpfezn Axiex Acpotn Height up to the plane guide: 800 mm

Condition: good (used), Year of construction: 2007, Max. cutting diameter 340mm, max. cutting length 400mm, Iedpfx Acozg Eayopjtn 66mm Bar capacity, Spindle speed 4000rpm, spindle motor power 22kW, milling speed 4,000rpm, 12 Station Turret, FANUC 32i Control, parts catcher, parts conveyor, swarf conveyor, 3 jaw Chuck, coolant

Condition: used, Year of construction: 2003, turning diameter 500 mm turning length 1000 mm Itsdpezc Ryrefx Acpen control Heidenhain weight of the machine ca. 3200 kg t

Condition: used, Year of construction: 1972, swing diameter 2200 mm centre distance 9500 mm turning diameter over bed 2200 mm workpiece weight 70 t turning speeds . U/min 4-jaw-chuck diameter 2100 mm control Siemens type Sinumerik 850 T mm transmission ratio . total power requirement . kW weight of the machine ca. . t Single Carriage Tailstock Hydrostatic Bed Chip Conveyor Serial Number: 27486 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Ijdpfx Ajzbc Apocpotn than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2018, functionality: fully functional, Heidenhain Manual Plus 620 HSCI Touch control system Swinging diameter over bed: 400 mm Swinging diameter over cross slide: 230 mm Cross slide travel: 220 mm Distance between centers: 1500 mm Turning length: 1310 mm Drive power: 16 kW Spindle head: DIN 55027 - A6 Spindle bore: 64 mm Tailstock diameter: 60 mm Tailstock travel: 140 mm Taper: MK4 Tool turret: Sauter, 8 x DIN 69880, diameter 30 mm Itedpfx Aceza Uq Njpon Multifix B mounted on the front of the slide.

Condition: used, Year of construction: 2011, Used 2011 CMZ TB67 presented in immaculate and well maintained condition, and photo'd here whilst still in production...specified as follows: Technical Specifications: Max. Swing Diameter 640mm Turning length: 400mm Maximum turning Ø: 340 mm X-Z travels: 200-400mm Spindle Nose: A2-6, Max RPM: 4,000 rpm Spindle Size / max bar Ø: 66mm Power: 17.4 Kw Turret 12 positions. Tailstock, shank travel: 120 mm Tailstock Quill Dia: 90mm X/Z Rapid Feed Rate: 30 m/min Machine Dimensions (L x W x H): 1,653 x 1,620 x 1,670 mm Machine Weight: 3,700 kg Additional Equipment: Parts Catcher Swarf Conveyor Tailstock Tool Measuring Arm Suite of tool holders 3-Jaw Hydraulic Chuck Turning length: 400mm Maximum turning Ø: 340 mm X-Z travels: 200-400mm Spindle Nose: A2-6, Max RPM: 4,000 rpm Power: 17.4 Kw Tailstock, shank travel: 120 mm Tailstock Quill Dia: 90mm X/Z Rapid Feed Rate: 30 m/min Machine Weight: 3,700 kg Itedpsy Ui Iasfx Acpon

Condition: used, Brand: GEMINIS Model: GHT4 G2 720 x 3000 Cnc: FAGOR 8055 Distance between points 3,000 mm Diameter over bed 720 mm Diameter over carriage 470 mm Bed width 550 mm Rapid traverse X axis 8 m/ min Rapid traverse Z axis 8 m/ min Spindle speeds 0-1600 Itsdpey R Evxofx Acpon Number of automatic head ranges 2 Main motor power 20 kW Spindle nose type DIN- 55027-11 MULTIFIX quick change tool holder Quill travel 104 mm Tailstock quill diameter 100 mm Tailstock quill traverse 200 mm Quill tailstock MORSE 6

Condition: good (used), Year of construction: 1996, Manufacturer: Tacchi Model: HD 1450 CNC STI Year of manufacture: 1996 Control: NUM With accessories. In excellent condition. Technical specifications: Swing diameter over bed: 1,450 mm Swing diameter over cross slide: 1,000 mm Chuck diameter: 1,200 mm Maximum turning length: 4,000 mm Spindle bore: 150 mm Itedpoy Ny I Tsfx Acpon Spindle speed: 560 rpm Capsule holder Machine weight: approx. 15 tons

Condition: not inspected (used), Year of construction: 1996, turning diameter over cross slide: 1,000 mm, turning length: 4,000 mm, turning diameter: 1,450 mm, spindle bore: 150 mm, rotational speed (max.): 560 rpm, overall weight: 20,000 kg, CNC NUM T Plus Capacity 4000 x 1450 mm on bed 1000 mm on cross-slide Itjdpeyzhrkofx Acpen 4-jaw chuck 1200 mm Steady rest Automatic turret Set of tool holders Weight 20,000 kg