Klomp GmbH & Co KG

Condition: used, Year of construction: 2021, Painting system for edge surfaces Manufacturer: WIKOMA Painting of narrow edge surfaces Commissioned: 2021 Hjdpfx Ajzuztxelbjnr Intended use: Spraying the edges of furniture panels arranged in stacks. Scope of delivery: - 2 spray booths - 2 hot air drying tunnels - 1 sanding booth - Chain conveyor - Control cabinet The system was in operation until the end of June 2025. Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: excellent (used), BRANDT KDF 440, 1440 edger Hnodpfxjzuztfs Alber well-equipped, CNC-controlled units operated from the control panel Pre-milling cutters Plate heating Glue application with a roller Second tank included Pneumatic pre-trimming guillotine Pressure rollers Trimming balls for final cut Liquids Multi-milling unit (up/down) R1-R2 Corner rounding unit R1-R2 Multi-profile edging unit R1-R2 Straight edging unit Liquids Polishing unit Nesting package Max. element height 60 mm Max. veneer thickness in roll 3 mm Feed rate max. 14 m/min with corner rounding 11 m/min Very good condition for a used machine Original mileage 144,000 meters

Condition: used, Technical details: table length: - mm table width: - mm table load: - t width: 1000 mm height: 1600 mm 3pieces available (price per piece) according to DIN 650:nach DIN 650: T-Nutenbreite a=27,5; h= 55; b= 49; c= 21 mm; Abstand der T-Nuten 200 mm Spannfläche: B: 1300 x H: 1600 x Dicke: 63 mm Hnedpfx Aozuzr Islbor Bei Ihrer Anfrage beziehen Sie sich bitte auf die Anzahl der gewünschten Aufspannwinkel. *

Condition: used, Technical details: table length: - mm table width: - mm table load: - t Hnjdpfx Alozuzrzjbjr width: 1200 mm height: 1600 mm 3pieces available (price per piece) according to DIN 650:nach DIN 650: T-Nutenbreite a=27,5; h= 55; b= 49; c= 21 mm; Abstand der T-Nuten 200 mm Spannfläche: B: 1300 x H: 1600 x Dicke: 63 mm Bei Ihrer Anfrage beziehen Sie sich bitte auf die Anzahl der gewünschten Aufspannwinkel. *

Condition: like new (used), functionality: fully functional, input voltage: 380 V, input current: 105 A, input frequency: 50 Hz, continuous power: 55 kW (74.78 HP), Complete designation: NXP01055-A2H1SSS-A1A300000 +QGLM+FL23*DPAP+DLDE Input: Uin: 3~380-500V, 50/60Hz, 105A, 40°C Output: 3~0-UIn, 0-320Hz, 105A, 40°C Power: 55kW: 400Vac / 90HP (Ref.): 480Vac Complete documentation included This frequency inverter comes from a warehouse clearance and has never been put into operation. Hedpfxozuzrue Albenr

Condition: used, Year of construction: 2009, Painting system The system consists of: SORBINI Smartcoater SP1 paint roller coating machine, year of manufacture 2009, approximately 3000 operating hours Hodpszuzrhsfx Albenr Roller coating and puttying machine Technical data - Working speed: 5-20 m/min - Workpiece width: max. 1350 mm - Workpiece thickness: max. 100 mm UV lamp control cabinet UV lamps SUPERFICI Model 2UVPLUS65, year of manufacture 1998, on a VENJAKOB conveyor belt, year of manufacture 1998, average number of operating hours 8500 Working area 1.5 - 7.5 m/min. Max. element width 1300 mm Dimensions (length x width) Lamps with conveyor belt: 5100 mm x 1700 mm (+ 600 mm motors) Rollers: 2200 mm x 2900 mm Control cabinet for UV lamp: 2000 mm x 800 mm Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 69584, Offer 26220 Technical Data: Hsdpozuzrbofx Albenr - Cutting length 3050 mm - Cutting thickness at 400 N/mm² tensile strength 16 mm - Cutting thickness at 400 N/mm² tensile strength up to 1000 mm length 18 mm - Cutting angle 0.5 - 3 ° - Number of sheet metal clamps 18 pcs - Stroke rate 10 - 23 min - Motorized back gauge up to 1000 mm - Rear guard with light curtain - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet metal thickness in mm - Automatic cutting angle adjustment based on sheet metal thickness - Cutting length limitation - Automatic positioning of the back gauge (8 programs – 80 steps) with - Digital display and automatic retraction of the back gauge - Drive 400 V / 22 kW - E - Foot pedal - Space requirement without support arms approx. W 4500 x H 2250 x D 2200 mm - Weight approx. 14500 kg

Condition: used, Year of construction: 2017, Year: 2016 Condition: Very good Hnodpfx Alozuzq Robjr Counter: 4,345,000 binding sets Configuration: - 2 × DSC 10/60i – 20 stations - LUL – HM module for manual loading - DBM 600 – stitching and folding module - DBM 600T – face trimming module - 2 × Hohner 43/6S stitching heads - Long delivery unit - PC + software for machine control - DBM 5000 STR – stacker Technical specification: - Changeover time: 54 sec. - ON-LINE / OFF-LINE - Maximum paper capacity at 80 g/m² – booklets: 30 sheets - Maximum paper capacity at 80 g/m² – flat stitching: up to 30 sheets - Maximum speed: 5,200 sets/hour - Maximum format: 640 × 364 mm - Minimum format: 170 × 105 mm - Booklet size: max. 364 × 320 mm; min. 105 × 75 mm - Stitching type: wire stitching – wire diameter 0.5 mm - Stitching positions: V1 (saddle / side / corner) - Number of Hohner stitching heads: 2 - Detection system: jam detection, missing sheet detection, double-sheet detection - Additional equipment: DBM 600T, DKT 200 - Dimensions: 1,848 × 717 × 1,005 mm - Weight: 377 kg - Power supply: 230 V / 50 Hz

Condition: used, Year of construction: 1967, Veneer shears Manufacturer: Hymmen Type: AS Year of manufacture: 1967 Technical data - 1-blade veneer shears - Working width: 2800 mm Hnodezuzqwspfx Alber - Package height: 80 mm - Depth: 800 mm Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2007, - Cutting length: 3,400 x 1,300 x 35 mm (depending on the wood type) - Incl. 3 spare blades - Incl. milling cutter - Incl. gluing station - New energy chains installed in 2020 Veneer shear Manufacturer: Fischer & Rückle / Monguzzi Year of manufacture: 2007 Veneer shear with milling unit and gluing unit for butt joint gluing - Cutting length: 3,400 x 1,300 x 35 mm (depending on the wood type) - Incl. 3 spare blades - Incl. milling cutter - Incl. gluing station - New energy chains installed in 2020 - Length: 7 m - Width: 3 m Hsdpfx Alozuzqqobonr - Height: 2 m Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2010, lifting height: 4,255 mm, Brand: Komatsu Type: CNI 14 Year of manufacture: 2010 Lifting capacity: 2000 kg Hnedpfxszuzqke Albor Lifting height: 4255 mm Mast lowered height: 189 cm Fork length: 95 cm Machine weight without battery: 1071 kg Includes external charger The Komatsu CNI 14 is the ideal electric stacker for moving pallets weighing up to 2000 kg. With its double stacking function and lift capability, it is perfect for warehouses, logistics operations, and distribution centers.

Condition: used, Year of construction: 1990, Paint/coating application system Hnedjzuzqdjpfx Albjr Manufacturer: Bürkle Type: DAL 1 1300 Year of manufacture: 1990 Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2006, - Veneer bundle length (fiber direction): 400 - 4000 mm - Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm - Veneer bundle thickness: approx. 10 - 40 - Throughput speed: approx. 27 m/min. Double gluing machine for veneer Manufacturer: Monguzzi, Carugate Type: Gluemaster Year of manufacture: 2006 For reliable, uniform, and precise application of PVAc or UREA adhesive in a single pass on veneer bundles that are joined parallel on both sides. Fine adjustment of the adhesive quantity and the uniformly applied lateral and vertical pressure on the veneer bundle result in precise, spot-free, and perfectly glued veneers with minimal adhesive consumption. Technical data: Veneer bundle length (fiber direction): 400 - 4000 mm Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm Veneer bundle thickness: approx. 10 - 40 Hodpfx Aszuzp Tslbonr Throughput speed: approx. 27 m/min. Special features: - The Gluemaster can be positioned directly next to a veneer gluing machine. - Quickly and easily accessible adhesive containers for fast and easy refilling or cleaning. - Tool-free removal of the adhesive containers and easy cleaning (no dead spots). - Continuous pressure rollers and large pressure plates for uniform pressure on the veneer bundle/edges during gluing. - Rigid 4-point upper roller guide with floating upper rollers to press the veneer bundle without damaging it. - Easily adjustable adhesive quantity. Adhesive pot cooling unit For a longer service life of the adhesive pot, especially recommended for the use of UREA adhesive. 1 motorized discharge roller conveyor To feed the glued veneer bundle out of the Gluemaster and transport it to the connected Fanningmaster. Length of the roller conveyor: 3600 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Hnedpfx Aszuzpyslber Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: used, Veneer machine Manufacturer: Fischer & Rückle Type: FZR 21 Year of manufacture: 2015 For the most efficient edge gluing of parallel-connected veneer strips into continuous or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or UREA adhesives. This edge feeding joining apparatus is the most economical alternative to longitudinal joining apparatuses for cross-grain applications. Production Approx. 17-20 joints/min. Technical data Veneer strip lengths (grain direction): 350-2150 mm Veneer strip widths (cross-grain direction): 50-600 mm Veneer surface width (cross-grain direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips Hsdpfezuzptsx Albsnr Panel Automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - The Furnimaster-plus has a veneer alignment function (reverse transport movement) - Perfect joining of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, proven horizontal pressing system that results in fully closed, strong glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to touchscreen panel, clear symbols, separate manometers with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain) directly after splicing. Short widths can be pre-set and measured with the integrated encoder. Larger widths are determined by two photoelectric sensors that are mounted at the required distance from the clipper on the direct stacking device. Direct stacking device DA-12R, belt system For unloading and stacking the veneer surface directly after joining. The joined surfaces are gently unloaded and stacked on this compact direct stacking device without any mechanical impact. Min. veneer sheet length (grain direction): 350 mm Veneer sheet widths (across the grain): 250 - 1200 mm Max. stack height: 500 mm Max. stack width (across the grain) for unloading to the rear end: 1200 mm Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding. Another Fischer & Rückle machine, type: FZR 21, year of manufacture: 2009, is also available.

Condition: used, Year of construction: 2006, - Max. cutting length: 2600 mm - Cutting widths: 45 - 350 mm - Opening of the pressure bar: 100 mm - Width of the pressure bar: 350 mm - Parallel stop with digital display: 25 - 1000 mm - Cutting angle approx.: 45 Veneer shears Manufacturer: Monguzzi, Carugate Type: AFD-35/2600 Year of manufacture: 2006 Hedpozuzpmjfx Albenr For clean, perfectly parallel and right-angled joining of veneer bundles in a single operation. Thanks to its high productivity, gentle handling of the raw material (no manual turning) and its precisely parallel cut, this guillotine is the perfect machine for preparing veneer strips for splicing. Production Up to 3 bundles/min Technical data Max. cutting length: 2600 mm Cutting widths: 45 - 350 mm Opening of the pressure bar: 100 mm Width of the pressure bar: 350 mm Parallel stop with digital display: 25 - 1000 mm Cutting angle approx.: 45 Features - Solid, robust construction with generously sized pressure bar and cutting table to accommodate the high clamping and shearing forces - Unique system with a fixed, solid cutting table and a movable pressure bar - Laser lights for precise visual identification of the cutting lines - High-quality hydraulic system with a large oil tank - Electrically driven parallel stop with quick adjustment - Industrial computer based on Windows, widescreen monitor and keyboard - Various operating modes and storable program sequences - Extensive recording of production data - Central lubrication unit Movable laser lines For optimizing veneer yield. The manually operated laser line for the position of the front knife can be quickly adjusted. The veneer width is transmitted to the computer at the touch of a button. The cutting process then starts automatically. Note: The technical data and descriptions are a transcript of the order confirmation from that time. Data is for informational purposes only and is not binding.

Condition: excellent (used), mileage: 284,325 km, power: 375 kW (509.86 HP), first registration: 02/2021, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,180 mm, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, number of seats: 2, total length: 10,260 mm, total width: 2,550 mm, permissible axle load (axle 1): 6,700 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 6,700 kg, loading space length: 655,350 mm, Year of construction: 2021, Equipment: AdBlue, retarder, General Information Number of doors: 2 Technical Information Number of cylinders: 6 Engine displacement: 12,882 cc Axle Configuration Maximum front axle load: 6700 kg Hedpszuzpgofx Albjnr Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Max. axle load: 6700 kg Weights Unladen weight: 11,380 kg Payload: 13,120 kg GVW: 24,500 kg Functional Loading platform height: 90 cm Maintenance, History, and Condition APK (Technical Inspection): valid until 04/2027 Technical condition: very good Optical condition: very good Financial Information VAT/Differential taxation: VAT deductible = Company Information = Hello

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,150 mm, spindle speed (max.): 6,000 rpm, table load: 6,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Hnsdpszuzpaefx Albsr Travel range, X-axis: 1,600 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,150 mm Spindle speed: 20–6,000 rpm Table size: 1,200 × 1,400 mm Table load capacity: max. 6 t When selecting the transport vehicle, the height and weight of the asset must be taken into account. There is no loading dock on site. However, a forklift or an overhead crane is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. The fee must be paid before collection. The sale is made with the exclusion of any guarantee or warranty. The information on the technical data comes from the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: excellent (used), Year of construction: 2018, The Agfa Jeti Tauro H2500 LED is a 2.54 m hybrid flatbed/roll-to-roll UV LED inkjet printer. Hnjdpfx Aszuzm Solbsr Colour configuration: CMYK Lc Lm + White + primer (6c W4 P2). Under Premium care service contract. Perfect working conditions. Only 3.500 hours of print. The high-performance UV LED printer for demanding large-format production. 2.54 m print width Up to 275 m²/h UV LED technology Hybrid flatbed + roll-to-roll Up to 1,200 dpi CMYK + Light Cyan + Light Magenta Optional White & Primer Print on rigid and flexible media Designed for high-volume, industrial production One machine. Endless possibilities. From signage and displays to POS, retail graphics, décor and banners, the Jeti Tauro H2500 LED delivers high-quality results with exceptional productivity. For further technical specifications please refer to attached brochure.

Condition: used, mileage: 1,081,258 km, power: 320 kW (435.08 HP), first registration: 03/2016, fuel type: diesel, tire size: 315/60 R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,040 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2016, Equipment: electric window regulation, parking heater, power mirror, spoiler, = Additional options and accessories = - MX brake - OptionCruise - Radio - Radio CD player - Roof Spoiler - Sleeper cabin - Spoilers = More information = Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Axle configuration Tyre size: 315/60 R22.5 Front axle: Max. axle load: 7500 kg; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50%; Suspension: air suspension Weights Empty weight: 7.931 kg Carrying capacity: 11.069 kg GVW: 19.000 kg Max. towing weight: 50.000 kg Interior Hedozuzm Eopfx Albonr Number of seats: 2 Maintenance APK (MOT): tested until 03/2027 Identification Registration number: 62-BGT-1

Condition: ready for operation (used), functionality: fully functional, empty load weight: 12,300 kg, maximum load weight: 2,007 kg, DGUV certified until: 04/2027, Year of construction: 1980, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! Valid safety inspection certificate until 04/27! TECHNICAL DETAILS Boom: 30 m Hook height: 34.2 m Load capacity at 15 m outreach: 2,007 kg Load capacity at 18 m outreach: 1,588 kg Load capacity at 21 m outreach: 1,300 kg Load capacity at 25 m outreach: 1,030 kg Load capacity at 28 m outreach: 881 kg Load capacity at 30 m outreach: 860 kg Hjdpfx Aljzuzmxsbonr Hoist rope diameter: 9.07 mm Trolley rope diameter: 6.8 mm Telescoping rope diameter: 12.6 mm MACHINE DETAILS Unladen weight: 12,300 kg EQUIPMENT Remote control Safety inspection report External reference: 633

Condition: good (used), mileage: 146,592 km, power: 110 kW (149.56 HP), first registration: 04/2006, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,500 mm, total height: 3,200 mm, permissible axle load (axle 1): 50 kg, permissible axle load (axle 2): 50 kg, Year of construction: 2006, Equipment: ABS, electric window regulation, = Additional options and accessories = - 1 fuel tank - Airbag - Armrest - Day Cabin Hjdpfxezuzmrj Albjnr - Disc brakes - Front suspension: Leaf - Radio - Rear suspension: Leaf = More information = General information Cab: single Axle configuration Brakes: disc brakes Suspension: leaf suspension Front axle: Max. axle load: 50 kg; Steering Rear axle: Double wheels; Max. axle load: 50 kg Weights Empty weight: 2.398 kg Carrying capacity: 5.500 kg GVW: 7.898 kg Condition Technical condition: good Visual appearance: good

Condition: good (used), mileage: 928,978 km, power: 480 kW (652.62 HP), first registration: 01/2007, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: blue, gearing type: mechanical, Year of construction: 2007, operating hours: 9,410 h, Equipment: ABS, electric window regulation, fog lights, power mirror, trailer coupling, - Brake booster - Low noise - Air-suspended seats - Air horn - Rotating beacon - Sun visor - Toolbox - Power take-off (PTO) Axle configuration Front axle 1: Steerable Front axle 2: Steerable Weights GVWR: 27,000 kg Functional Mast: Telescopic (12 sections) Mast length: 30 m Lifting capacity: 25,000 kg Crane manufacturer: PALFINGER PK 85002 E + PJ 170 + LIER CE marking: yes Condition Technical condition: good Optical condition: good DAF XF 480 8x4 semi-trailer tractor / flatbed truck Palfinger PK 85002 E + PJ 170 E JIB – 12-section hydraulic – approx. 34 m working height We offer you a very well-equipped DAF XF 480 8x4, designed as a multi-functional semi-trailer tractor / flatbed truck, with a heavy Palfinger PK 85002 E loading crane including Palfinger PJ 170 E JIB, mounted directly behind the cab. Due to the combination of a heavy loading crane, JIB, winch, sliding fifth wheel, trailer coupling, and ballast platform, this vehicle is ideally suited for heavy-duty crane operations, transport of machinery and construction equipment, assembly work, and special transports. VEHICLE DATA Make / Model: DAF XF 480 Drive: 8x4 Design: Semi-trailer tractor / flatbed truck First registration: 01/17/2007 Mileage: 928,978 km CAB & EQUIPMENT * DAF XF SpaceCab * Air conditioning * Auxiliary heater * Manual transmission * Spacious SpaceCab * Sliding fifth wheel * Trailer coupling * Multi-functional design as semi-trailer tractor / flatbed truck * Ballast platform * Extensive stainless steel / V2A equipment * Various stainless steel tool and storage boxes Hsdpfjzuzmlsx Albjnr PALFINGER LOADING CRANE Manufacturer / Model: Palfinger PK 85002 E JIB: Palfinger PJ 170 E Mounting: Behind the cab Crane operating hours: 9,410 hours The crane is very extensively equipped with: * Palfinger PJ 170 E hydraulic JIB * Main boom + JIB with a total of 12 sections * Radio remote control * Hydraulic winch * Additional oil cooler for the crane hydraulics * Additional hydraulic function on the JIB * Complete hydraulic system CRANE PERFORMANCE Maximum lifting capacity: approx. 25,000 kg Maximum working height: approx. 34 meters Maximum boom / mast length: approx. 30 meters Through the combination of the heavy Palfinger PK 85002 E main crane with the Palfinger PJ 170 E JIB, this vehicle has a very large working area. The crane configuration with a total of 12 sections makes this vehicle particularly interesting for work where a large reach and working height are required. MULTI-FUNCTIONAL DESIGN A particular advantage of this DAF is its versatile configuration. The vehicle can be used as a semi-trailer tractor and has a sliding fifth wheel for this purpose. In addition, the vehicle is offered with a ballast platform, making it ideal for heavy crane work and special transports. A trailer coupling is also available and...

Year of construction: 2009, condition: used, Max. saw blade diameter: 500 mm Hnodpfx Alozuzmfobjr Max. feed length: single 650 mm (3-stage feed possible) Pneumatic material feed Pneumatic Sawing Feed Minimum quantity spray device Piece counter with shut-off automatic Digital display of conveyance length Cutting height quickly adjustable via 4-position selector switch Includes chip suction 800 kg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Technical Specifications: Manufacturer: Thompson Meat Machinery. Hodszuzl Ujpfx Albonr Model: 4200 M/M single-shaft mixer grinder. Serial Number: TMG.4200.259. Date of manufacture: 2002. Output capacity - up to 4,000 kg/h (depending on product). Hopper capacity - 390 litres. Mix capacity - up to 200 kg. Head size - #56. Supplied with various hole plates and other spare parts. Motors: Voltage (V): 415 V (for all motors). Frequency (Hz): 50 Hz (for all motors). Total Ampage: 35.8 A.