WIMAG-Schweisstechnik GmbH

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm 2800 1/min 3,6 kW 1020 mm 820 mm Nsdpfx Abeywcl Rsvscp 2170 mm 440 kg Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: new, functionality: fully functional, grinding length: 304 mm, grinding width: 152 mm, Surface Grinder MSG 1530 BERNARDO Compact surface grinder: longitudinal, cross, and vertical feeds are all completely manual. Low-vibration spindle operation thanks to the use of high-quality special bearings. Ncodpfx Aboyt Hycovsp Indispensable for machining smaller parts and in fast grinding processes. Longitudinal table movement via a combination of V-guide and flat guide; cross table travel and vertical wheel feed are handled by dovetail guides. Central manual lubrication for all guides. All main components, such as the column, base, and slideways, are made from high-quality cast iron. Technical Specifications Table clamping surface width: 304 mm Table clamping surface depth: 152 mm Longitudinal travel (X): 340 mm Cross travel (Y): 170 mm Max. spindle axis to table distance: 210 mm Max. table load: 30 kg Grinding wheel size: 180 x 13 x 31.75 mm Grinding spindle speed: 2800 rpm Grinding spindle motor power: 0.55 kW Voltage: 230 V Dimensions (width): 1100 mm Dimensions (depth): 760 mm Dimensions (height): 880 mm Weight approx.: 210 kg Cross feed (Y) Manual cross feed: 2.54 mm/rev. Handwheel graduation (Y): 0.02 mm Vertical feed (Z) Manual vertical feed: 1.25 mm/rev. Handwheel graduation (Z): 0.025 mm Scope of delivery Basic tools Permanent magnetic chuck Grinding wheel flange Grinding wheel Legally required safety guards Complete DTR (technical documentation) in Polish CE certificate 24-month warranty for all, at no extra charge

Condition: good (used), Year of construction: 1981, functionality: fully functional, grinding length: 500 mm, feed length Y-axis: 200 mm, grinding height: 412 mm, type of input current: AC, spindle speed (max.): 3,700 rpm, overall weight: 1,600 kg, grinding spindle speed: 3,700 rpm, power: 7 kW (9.52 HP), input voltage: 400 V, disc diameter: 225 mm, space requirement length: 2,090 mm, space requirement width: 1,320 mm, High precision grinding machine wth automatic feed Nodeynk A Dopfx Abvscp

Condition: as good as new (ex-display), Year of construction: 2025, GT 25 – The OPTIMUM Premium NC Grinding Machine with Siemens Touchscreen. • Electromagnetic chuck for securing the workpiece, with automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter-guides for high wear resistance and low friction • Grinding spindle with premium precision bearings • Grinding wheel can be dressed directly on the machine with an integrated dressing device • Digital position display • Machine base made of stable, torsion-resistant cast iron for maximum rigidity and stability • Longitudinal, cross, and vertical axis guideways are backlash-free and self-centering, designed as V and flat guideways • Precision ball screws • Central lubrication for guideways and feed screws • All flat guides are finely scraped, guaranteeing maximum precision in all manual movements • Safety electronics with 24 V DC • Large, decoupled handwheels on all three axes • Hydraulic lines according to DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all standard steels • Swivel control panel makes operation significantly easier Nedpfxsymdwfj Abvecp • Separate hydraulic unit with heat exchanger prevents vibrations and thermal loading • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly reduces energy consumption, providing substantial cost savings Technical Data: Dimensions and Weights Length approx. 2300 mm Width/Depth approx. 1600 mm Height approx. 1675 mm Weight approx. 1700 kg Electrical Data Total connected load: 3 kW Supply voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Surface Grinding Table Length: 254 mm Width: 508 mm Grinding Wheel(s) Outer diameter: 200 mm Width: 20 mm Bore: 31.75 mm Peripheral speed: 33 m/s Spindle Speed: 2850 rpm Radial runout accuracy: 0.005 mm X-Axis Feed speed: 5 – 25 m/min Packaging unit: 1 Scope of Delivery Unit: Piece Packing unit: 1 Digital position display Coolant system Balancing arbor Grinding wheel, grit 46 Diamond dresser Operating tools Manual oil pump LED lamp Electromagnetic chuck Demagnetization function Features Electromagnetic chuck Table splash guard enclosure Automatic demagnetization device Parallel dressing device 40 W coolant system LED work lamp Leveling feet

Condition: as good as new (ex-display), Year of construction: 2025, GT 40 – The OPTIMUM Premium NC Grinding Machine with Siemens Touch Screen. • Electromagnetic clamping plate for securing the workpiece, featuring automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter-guides for high wear resistance and low friction • Grinding spindle equipped with premium precision bearings • The grinding wheel can be dressed directly on the machine using the dressing device • Digital position display • Machine base made from stable, torsion-resistant cast iron for maximum rigidity and stability • Guideways for longitudinal, cross, and vertical movements are backlash-free and self-centering, designed as V and flat ways • Precision ball screw drives • Guideways and feed screws with centralized lubrication • All flat guides are hand-scraped, guaranteeing the highest precision for all manual movements • Safety electronics with 24 V DC voltage • Large, decoupled handwheels on all three axes • Hydraulic lines compliant with DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all common steels • Swiveling control panel for greatly simplified operation • Separate hydraulic unit with heat exchanger to prevent vibrations and thermal stress • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly reduces energy consumption and provides substantial cost savings Dimensions and Weights Length approx. 3600 mm Width/Depth approx. 2400 mm Ncedpfx Aboymduqevop Height approx. 1900 mm Weight approx. 3600 kg Electrical Data Total connected load: 7.5 kW Supply voltage: 400 V Mains frequency: 50 Hz Surface Grinding Table Clamping area length: 400 mm Clamping area width: 800 mm Grinding Wheel(s) Outer diameter: 350 mm Width: 40 mm Bore: 127 mm Peripheral speed: 27 m/s Spindle Speed: 1450 rpm Run-out accuracy: 0.005 mm X-Axis Feed rate: 5 – 25 m/min Standard Features • Digital position display • Coolant system • Balancing arbor • Grinding wheel, grit 46 • Diamond dresser • Operating tools • Manual oil pump • LED lamp • Electromagnetic clamping plate • Demagnetization function Equipment • Electromagnetic clamping plate • Table enclosure with splash guard • Demagnetization device • Parallel dressing device ✔ • Coolant system 125 W • Working light: LED lamp • Leveling feet ✔

Condition: as good as new (ex-display), Year of construction: 2025, GT 30 - The OPTIMUM premium NC sanding machine with Siemens touch screen. - Electromagnetic clamping plate for fixing the workpiece with automatic demagnetization function - High-quality spindle with precision tapered roller bearings - Hardened and ground table guideways - Turcite-B coated counter guides for high wear resistance and low friction - Grinding spindle with high-quality precision bearings - Grinding wheel can be resharpened directly on the machine using a sharpening device - Digital position indicator - Machine base made of sturdy torsion-resistant cast iron for maximum rigidity and stability - Guideways for longitudinal, transverse and vertical movements are backlash-free and self-centring as V and flat tracks - Precision recirculating ball screws - Guideways and transport spindle with central lubrication - All flat guides are finely scraped and thus guarantee maximum precision of all manual movements - Safety electrics with 24 V DC voltage - Large decoupled handwheels in all three axes - Hydraulic lines according to DIN EN 853 - Sanding accuracy: 0.005 mm - Grain 46 corundum grinding wheel for all common steels - Swivel-mounted control panel makes work considerably easier - Separate hydraulic unit with heat exchanger, avoids vibrations and thermal stress - Two-channel safety electronics - Grinding table splash guard - EMC filter class - With IE3 motor - consumes considerably less energy, resulting in significant cost savings Dimensions and weights Length approx. 3200 mm Width/depth approx. 2200 mm Height approx. 2100 mm Weight approx. 3000 kg Electrical data Total connected load 6.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Clamping surface length 300 mm Clamping surface width 600 mm Grinding wheel(s) Outer diameter 350 mm Width 40 mm Bore 127 mm Peripheral speed 27 m/s Spindle Speed 1450 min¯¹ Concentricity 0.005 mm X-axis Feed speed 5 - 25 m/min Scope of delivery Unit of measure: piece Packaging unit: 1 Digital position indicator Coolant device Balancing mandrel Grinding wheel grit 46 Diamond pin Operating tool Manual oil pump LED lamp Electromagnetic clamping plate Demagnetizing function Equipment Electromagnet clamping plate Splash guard table enclosure Automatic demagnetizing device Parallel dressing device ✔ Coolant device 125 W Njdpfx Aeymdtyjbvjcp Work light LED lamp Alignment feet ✔

Condition: good (used), Year of construction: 2004, functionality: fully functional, grinding wheel diameter: 200 mm, disc diameter: 200 mm, We are offering this well-maintained Tecno Wasino Meister G3 surface grinding machine, year of manufacture 2004. Nodpoylv Uajfx Abvocp Grinding wheel diameter: 200 mm Additional spindle – see picture If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Hand-lever Surface Grinding Machine - HAAS UHS FL - Grinding length: 350 mm - Grinding width: approx. 180 mm - Grinding height: 250 mm - Grinding movement via hand lever Nsdpfxeyk Dq Ts Abvjcp - Swiveling range (horizontal): 360 degrees - Tilting range (vertical): +- 15-20 degrees - General angle adjustment - Spindle speed: 2500 / 5600 rpm - Drive power: 1.1 kW Dimensions: LxWxH 1.2x1x1.7 meters / Weight 700 kg Subject to errors and input mistakes

Condition: used, Year of construction: 1979, Surface grinding machine ABA FFK, No. 791144, year of manufacture 1979, weight 740 kg, clamping surface 150 x 350 mm, working area 350 x 300 x 150 mm Ncjdsyhqr Sspfx Abvjp

Condition: used, Year of construction: 1973, grinding length 600 mm grinding width 250 mm workpiece height 500 mm table surface area 600 x 200 mm dimensions of grinding wheel 220 mm table height over floor 1000 mm grinding spindle speed 1400 / 2800 U/min total power requirement 2,0 kW Nedpfxjyfwx Ts Abvocp weight of the machine ca. 1,5 t dimensions of the machine ca. 1,4 x 1,2 x 1,9 m

Condition: used, Year of construction: 2012, workpiece . workpiece diameter 15 -70 mm swing diameter max. 150 mm clamping length max. 500 mm Swing over bezel area 70 mm dimension 150 x 300 mm max. turning speeds 250 min/-1 longitudinal adjustment manuell über Kettenrad Fixed tip MK 4 (Junker D75 mm) clamping capacity ü. Hydraulik einstellbar travel -z axis max. 1000 mm feed z - Achse (CNC gesteuert) dimension D 205 x 450 mm flange diameter D 190 mm standards association D 127 mm drive 30 kW speed control mit Frequenz- Umformer max. turning speeds 4400 min/-1 type Borazon (CBN) o. Diamant mm diameter 450 mm bore D 127 mm peripheral speed max. 90 m/sec type GR-3520-NR mm diameter range D 20 - D 35 mm dimension D 80 x 250 mm flange D 100 standards association D 75 drive 1,8 kW max. turning speeds 24000 min/-1 weight of the machine ca. 7,0 t In our opinion, the machine is in good condition and can be inspected under power by appointment. Ncodpfxsx H Andj Abvsp There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), Year of construction: 1973, functionality: fully functional, input voltage: 380 V, Possible accessories can be negotiated on site. Nedpfxoxyqalo Abvocp

Condition: used, Year of construction: 2004, grinding length: 300 mm, grinding width: 150 mm, total height: 1,700 mm, total length: 1,400 mm, total width: 1,000 mm, grinding wheel diameter: 200 mm, table length: 400 mm, table width: 150 mm, spindle speed (min.): 2,800 rpm, grinding spindle speed: 2,800 rpm, power: 1.5 kW (2.04 HP), disc diameter: 200 mm, Surface grinding machine, SIEMENS Simatic OP17 control, magnetic chuck 300x125 mm, grinding wheel dresser, coolant system, various grinding wheels Nsdpoxx Th Ajfx Abvecp

Condition: good (used), Year of construction: 1984, Machine is in good working codition. Njdexvikujpfx Abvecp

Condition: used, Year of construction: 1976, grinding length: 350 mm, grinding width: 150 mm, total height: 2,150 mm, total length: 1,200 mm, total width: 1,100 mm, grinding wheel diameter: 175 mm, table length: 400 mm, table width: 150 mm, spindle speed (min.): 2,800 rpm, grinding spindle motor power: 750 W, power: 0.75 kW (1.02 HP), Surface grinding machine, SONY digital readout, manual and automatic feed, manual magnetic chuck 350x150 mm, grinding wheel dresser, coolant system Ncjdpfx Asxq Abijbvep

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 6190, grinding wheel diameter: 150 mm, table length: 720 mm, table width: 200 mm, overall weight: 2,000 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid obligates you to collect the machine on schedule between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Table dimensions: 720 x 200 mm Grinding wheel diameter: 150 mm MACHINE DETAILS Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 15 A Control voltage: 220 V Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,000 x 1,700 mm Weight: 2,000 kg EQUIPMENT Nedpoxqg E Ssfx Abvscp Magnetic chuck (450 x 200 mm) RSF three-axis digital readout BRAILLON magnetizing and demagnetizing station JUNG adjustable magnetic chuck (120 x 90 mm)

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 384, grinding wheel diameter: 250 mm, table length: 1,300 mm, table width: 500 mm, overall weight: 1,500 kg, jaw width: 160 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business closure. Placing a bid obligates you to collect the machine on time between 26.01.2026 and 29.01.2026! Nsdpfxexqf Uxo Abvocp TECHNICAL DETAILS Table dimensions: 1,300 x 500 mm Magnet dimensions: 1,020 x 450 mm Grinding wheel diameter: 250 mm Jaw width: 160 mm MACHINE DETAILS Electrical Data Operating voltage: 380 V Control voltage: 220 V Rated current: 25 A Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,400 x 1,900 mm Weight: 1,500 kg EQUIPMENT 3 T-slots Magnetic chuck Various grinding wheels Vice Belt filter system

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 6471, grinding wheel diameter: 200 mm, overall weight: 1,000 kg, No reserve price – guaranteed sale to the highest bidder! Njdpfoxqf E Rox Abvjcp The machine is being auctioned due to business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Magnet dimensions: 450 x 220 mm Grinding wheel diameter: 200 mm MACHINE DETAILS Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 15 A Dimensions & weight Dimensions (L x W x H): 3,000 x 1,500 x 1,700 mm Weight: 1,000 kg EQUIPMENT DIAFORM dressing device

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, grinding wheel diameter: 150 mm, jaw width: 70 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to company closure. Submitting a bid commits you to timely collection between 26.01.2026 and 29.01.2026! Ncsdjxqb D Aspfx Abvop TECHNICAL DETAILS Magnet dimensions: 500 x 200 mm Grinding wheel diameter: 150 mm Jaw width: 70 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,500 x 1,600 mm Weight: 700 kg EQUIPMENT Matching workbench with sine magnetic chuck Various grinding wheels Precision vise

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 693 / 90, TECHNICAL DETAILS Nodpfxjxl S H Re Abvjcp Clamping surface: 600 x 250 mm EQUIPMENT YZ positioner Paper band filter system

Condition: ready for operation (used), Year of construction: 2005, grinding length: 400 mm, grinding width: 200 mm, capacity 400x200MM, manual table, magnetic chuck, external electrical cabinet Njdpfx Aoxc Ivcsbvecp

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 340 mm, grinding width: 170 mm, total height: 730 mm, total length: 930 mm, total width: 780 mm, The G115 flat grinder is a compact grinding machine designed for processing the circumference or end face of the grinding wheel on horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, it is also possible to machine inclined or contoured surfaces. The machine is ideally suited for small businesses, maintenance operations, home workshops, laboratories, instructional demonstrations, and more. TECHNICAL DATA Maximum removal rate: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal travel of worktable: 340 mm Cross travel of worktable: 170 mm T-slot of worktable: 1–12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Grinding head motor: 550 W / 220 V Vertical feed handwheel increment: 0.025 mm Njdpfoxb Uq Dex Abvecp Lateral feed handwheel increment: 0.02 mm Net weight / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity throughout the entire machine structure. The grinding head operates smoothly. Compact design and low noise emissions. A working enclosure is available separately. The machine is lubricated via a manual oil pump. To lubricate, simply pull out the handle. If you require special accessories to increase work efficiency, please contact customer service. Special accessories must be purchased separately. PRODUCT INFORMATION: From the proximal end of the main spindle, the radial run-out of the tapered bore axis is 0.01–0.02 mm at a distance of 100 mm.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6360.16.65, Country of manufacture: Switzerland Voltage: 380/400/50/3 Net weight: 1350 kg Customs tariff number: 8460.1920 Dimensions: 200/120/160 cm TECHNICAL SPECIFICATIONS Maximum saddle travel: 530 x 220 mm Maximum grinding surface: 520 x 230 mm Table clamping surface: 600 x 200 mm Table speeds Longitudinal, standard operation: 0-25 m/min With slow feed: 5/10 mm - 8 m/min Cross feed: 0-6 m/min Vertical travel by hand: 330 mm Rapid travel by motor: 290 mm Rapid feed rate: 460 mm/min Max. distance between table and spindle axis: 412 mm Vertical feed movement Handwheel, 1 division: 0.01 mm Micrometric device, 1 division: 0.001 mm Automatic: 0.001-0.099 mm With pulse button: 0.001 mm Cross feed movement Handwheel, 1 division: 0.01 mm Micrometric device: 0.001 mm Grinding wheel Diameter x width x bore: 225x25x50/51 mm Standard RPM: 2700 rpm With variable speed drive: 3700-1300 rpm All technical data are provided without guarantee and are subject to possible errors or omissions. Nedew Ucxqopfx Abvjcp

Condition: good (used), Year of construction: 1994, completely overhauled in 1994 Table length: 450 mm Table width: 180 mm Execution: Hydraulic Maximum distance between table and spindle center: 400 mm Ncjdpfxew R Tl He Abvsp Longitudinal travel (X-axis): 550 mm Cross travel (Y-axis): 200 mm Automatic vertical feed Grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speeds: from 2800 rpm Digital display Weight: 1,000 kg

Condition: as good as new (ex-display), Year of construction: 2024, High-quality spindle with precision tapered roller bearings Hardened and ground table guideways Turcite-B coated counter guides for high wear resistance and low friction Integrated grinding wheel removal device Machine base made of sturdy, torsion-resistant cast iron for maximum rigidity and stability Backlash-free V-flat guide in the Z-axis and flat guides in the X- and Y-axis Trapezoidal threaded spindle in the Y-axis Manual central lubrication All flat guides are finely scraped, guaranteeing high precision of all manual movements LED lamp Safety electrics with 24 V DC voltage Sanding accuracy: 0.005 mm Grit 46 corundum grinding wheel for all common steels included as standard Two-channel safety electrics EMC filter class Nodpfx Asw Eay Ijbvocp Significant energy savings thanks to IE3 motor Coolant system with external coolant tank Dimensions and weights Length approx. 1970 mm Width/depth approx. 1300 mm Height approx. 1700 mm Weight approx. 850 kg Electrical data Power drive motor 1.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Clamping surface length 200 mm Clamping surface width 500 mm Grinding wheel(s) Outer diameter 200 mm Width 20 mm Bore 31.75 mm Peripheral speed 33 m/s Spindle Speed 2850 min¯¹ Concentricity 0.005 mm X-axis Feed speed Manual