BROKOV s.r.o.

Condition: ready for operation (used), Year of construction: 2013, Immediately available from university stock: L & Z Lathe Eagle Model LC 340 Year of manufacture: 2013 Centre height: 170 mm Swing over bed: 340 mm Swing over carriage: 205 mm Turning length: 1000 mm Dsdpsyzdzuefx Aaascf Spindle bore: 38 mm Drive: 1.5 kW Spindle speeds: 60 – 2000 rpm Tailstock quill: 40 mm Chuck: 160 mm Faceplate: 200 mm 4-way tool post Weight: 2 t Offered at €2,500 – plus VAT, ex location

Condition: used, functionality: fully functional, The machine has not been in operation for about one year. It is not connected to the power supply. The machine is available for inspection upon request. – CNC control: OSP 5000L-G CNC system (German language) – Data transmission: RS232 – Tool turret: 12-position BOLT ON type – Chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – Non-through spindle – Spindle bore diameter: 75 mm (at a depth of 70 mm, measured from the face of the chuck and without jaws) – Spindle bore diameter: 28 mm (at a depth of 200 mm, measured from the face of the chuck and without jaws) – X axis travel: 400 x 0.001 mm – Z axis travel: 500 x 0.001 mm Dedpfxeyy Upae Aaajcf – XZ cutting speed: 0.01-1000 mm/rev – XZ feed rate: 12,000 mm/min – Power supply: 3 x 400V – Machine rated power: 21 kVA – Maximum load current: 36A – Machine dimensions (width x depth x height): 2.9 m (3.9 m with chip conveyor) x 1.8 m x 1.72 m – Machine weight: 4500 kg

Condition: not inspected (used), Year of construction: 2005, turning length: 500 mm, turning diameter: 310 mm, spindle bore: 36 mm, spindle speed (max.): 6,000 rpm, overall weight: 3,200 kg, Fanuc Oi TD Turret with 10 positions Length capacity: 500 mm Dcjdpfxeyyz Dwj Aaaef Chip conveyor

Condition: used, Year of construction: 1995, operating hours: 54,690 h, functionality: fully functional, machine/vehicle number: 09043, turning diameter over cross slide: 345 mm, turning length: 800 mm, turning diameter: 400 mm, spindle bore: 86 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, rotational speed (min.): 20 rpm, rotational speed (max.): 4,000 rpm, total height: 2,000 mm, total length: 4,400 mm, total width: 2,300 mm, quill diameter: 95 mm, quill stroke: 135 mm, overall weight: 6,550 kg, bar passage: 74 mm, number of driven tool stations in tool turret 1: 6, number of tool stations in tool turret 3: 12, Equipment: documentation/manual, rotational speed infinitely variable, We offer this used SAG Graziano MT500 C CNC lathe, year of manufacture 1995. Djdeyyk I Sopfx Aaascf Series: 09043 Model: MT500 C Serial number: 928128 Weight: 6,550 kg Max. spindle speed: 4,000 rpm Spindle bore: 95 mm If you have any questions or require more information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of manufacture: 2007 Internal machine no.: 26 Djdpjyyk I Eefx Aaascf Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Swing diameter over carriage: 410 mm Spindle bore: 72 mm Spindle speed: 45 – 5,000 rpm 2 tool turrets A turret: 12 tool positions (live tooling) B turret: 8 tool positions Equipment: Tailstock Transformer Touch setter Chip conveyor OneTouch IGF

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning length: 800 mm, turning diameter: 350 mm, CNC Lathe TAKISAWA TMM 250 – Twin-Spindle, Y-Axis, Live Tooling Manufacturer: TAKISAWA Model: TMM 250 Control: Fanuc 180is-TB Year of manufacture: 2004 5. MACHINE SPECIFICATIONS Capacities Workpiece turning diameter: 780 mm Standard turning diameter: 220 mm Max. turning diameter: 350 mm Max. turning length: 800 / 200 mm (flange) Distance between spindle ends: 1130 mm Dsdpfsyx S Iqjx Aaascf Bar work capacity: 76.2 / 50.8 mm (left/right spindle) Travel X-axis travel (upper turret): 265 mm Y-axis travel (upper turret): ±50 mm Z-axis travel (upper turret): 760 mm A-axis travel (right spindle side): 800 mm X-axis travel (lower turret): 228 mm Z-axis travel (lower turret): 760 mm Spindles Number of spindles: 2 Spindle speed: 4,000 rpm (left, right) Number of gear stages: 1 Min. spindle index angle: 0.001° (Cs-axis) Spindle nose size: JIS A₂-8 / A₂-6 (left/right spindle) Taper bore (type, no.): 90 × 1/20 taper // 75 × 1/20 taper (left/right spindle) Spindle bearing inner diameter: 120 / 100 mm (left/right spindle) Spindle bore diameter: 86 / 63 mm (left/right spindle) Machine Description High-performance CNC lathe with twin spindles and two turrets. The machine enables simultaneous machining with both turrets on one spindle (4-axis machining), making it ideal for complex turning/milling operations. Highlights - 2 spindles with C-axis - 2 turrets (VDI 40) - Y-axis on upper turret (±50 mm) - Live tooling - FANUC CNC control (32 bit) - Touchscreen operation - Double holders possible (up to 60 tool positions) Technical Data Left spindle: Power: 15 / 22 kW Torque: max. 433 Nm Speed: up to 4,000 rpm Spindle bore: 86 mm Bar capacity: 76 mm Right spindle: Power: 11 / 18.5 kW Torque: max. 326 Nm Speed: up to 4,000 rpm Spindle bore: 63 mm Bar capacity: 51 mm Tooling: 2 turrets with 15 positions each Max. 15 live tools per turret Tool drive power: 3.7 / 5.5 kW Tool speed: up to 4,000 rpm Equipment - FANUC AC servo drives - 10.4" colour LCD with touchscreen - Rigid tapping - Automatic central lubrication - Coolant pressure: 4 bar (optional 6 bar high-pressure pumps) - Fully enclosed machine housing with work area lighting - CE compliant Additional Equipment Chucks: Left: Schunk HSL 315 Right: SMW BBM 250 Automatic work area door (pneumatic) Chip conveyor (hinged belt, right) High-pressure coolant pumps (6 bar each turret) Manual tool setter 3-colour signal lamp Machining Data Turning length: 760 / 200 mm Tool torque: max. 35 Nm Condition Used, fully functional – well-maintained industrial machine.

Condition: excellent (used), OKUMA control system Dsdpfxeyxrgge Aaaecf Turning diameter: 650 mm Turning length: 1,450 mm Technical information see photo

Condition: used, Year of construction: 2018, turning length: 735 mm, turning diameter: 315 mm, travel distance X-axis: 267 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 840 mm, Takisawa Japan TS-4000YS General Data Brand: Takisawa Japan Model: TS-4000YS Category: CNC Lathe Year: 2018 CNC Control: FANUC Series 32i-TB Capacity Max turning diameter: Ø 600 mm Max machining diameter: Ø 315 mm Dedeyxqqqopfx Aaajcf Max machining length: 735 mm Bar capacity: No. 1: Ø 81 mm | No. 2: Ø 40 mm Axis Travel X-axis: 267 mm Y-axis: -50 / +70 mm (120 mm) Z-axis: 840 mm A-axis (sub-spindle): 780 mm Main Spindle Spindle speed: 4,200 rpm Spindle/sub-spindle nose: ASA-8 Chuck diameter: 254 mm C-axis accuracy: 0.001° Spindle motor power (cont/30 min): 22 kW Sub-Spindle Spindle speed: 6,000 rpm Spindle nose: FLAT-140 Chuck diameter: Ø 210 mm B-axis accuracy: 0.001° Sub-spindle motor power (cont/30 min): 11 kW Turret Static/motorized turret stations: 15 stations (motorized) Driven tool speed: 6,000 rpm Driven tool motor power (cont/30 min): 7.5 kW Turning/boring tool size: 25x25 mm / Ø 40 mm Feed Rates Rapid traverse X / Z / A axes: 30,000 mm/min Rapid traverse Y axis: 10,000 mm/min Accessories - Right side chip conveyor - Spindle line transformer + air conditioner - 4 driven tool holders (2 radial + 2 axial) + various static holders - Renishaw tool presetter on main spindle - Removable Renishaw presetter on sub-spindle - Parts ejector arm on main spindle - Manuals, electrical diagrams, and CE declaration

Condition: used, NAKAMURA-TOME WT-150 is a high-precision CNC turning lathe designed for accuracy and reliability. Capacities: swing over cross-slide 310 mm, spindle bore 51 mm, turning length 255/755 mm; X 207.5 mm; Z 300 mm; Y 2×±30 mm. Specs: 2 spindles, 2 turrets with 12 positions and driven tools, spindle speeds 60–6000 rpm, spindle power 7.5/5.5 kW, driven tools 3.2/2.7 kW, rapid traverse X=12/Z=40 m/min, 3×400 V 50 Hz, weight ≈8500 kg, dims 3850×2330×2320 mm. Accessories: lamp, high‑pressure coolant, parts catcher, chip conveyor, foot pedal, set of toolholders/steel supports. Achieves tight tolerances; suited to automotive, aerospace, medical and tooling. Dcsdpfsyxn Nwsx Aaaof

Condition: used, NZX 1500/800SY is a CNC Turning-Milling-Drilling Center with high precision, accuracy and reliability. Capacities: 2 turning spindles, 2 revolvers, swing diameter over bed 800 mm, max. turning Ø 320 mm, max. bar Ø 52 mm; travels Z 810 mm, X 210 mm, Y 110 mm (both carriages). Specs: spindle speeds 0–6000 t/min, spindle power 22/18.5 kW, driven tools power 7.5/5.5 kW, spindle nose JIS A2-5, spindle hole 61 mm; rapid traverse X 30 m/min, Z 50 m/min, Y 20 m/min; weight ~8100 kg; overall dims L4396×W2835×H2320 mm. Accessories: direct measuring system X axis, lamp, coolant system, coolant through counter spindle, loader interface, parts catcher, workpiece conveyor, chip conveyor. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and machine tools. Dodpfxsyxn I He Aaaecf

Condition: used, GILDEMEISTER NEF 320 is a CNC turning lathe engineered for precision machining, high accuracy and operational reliability. Working capacities: max. turning diameter 320 mm, max. turning length 740 mm, centre height 160 mm, distance between centres 750 mm, spindle hole 52 mm; travels Z 700 mm, X 185 mm. Main specs: spindle power 11 kW, max. torque 410 Nm, speeds stepless 4–4000 t/min, spindle taper MT 6; tailstock Morse taper 5, spindle stroke 120 mm, spindle diameter 70 mm; rapid traverse X 8 m/min, Z 10 m/min; weight ~2000 kg, dimensions 2450×1668×1825 mm. Enables tight tolerances; typical applications include automotive, watchmaking, toolmaking, aerospace and medical sectors. Dodpfx Asyxnugoaascf

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,546 h, functionality: fully functional, turning length: 284 mm, turning diameter: 300 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, controller model: Fanuc Oi-TD, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. turning length: 284 mm Swing diameter over bed: 550 mm Chuck diameter: 210 mm Bar capacity: 51 mm Spindle nose: A2-6 Main spindle max. speed: 4,500 rpm Spindle bore: 62 mm Spindle bearing diameter: 100 mm Main spindle drive power: 11 / 7.5 kW Travel - X axis: 170 mm Travel - Z axis: 335 mm Dcedpfsyxmmujx Aaasf Number of tool stations: 12 positions Tool size: Ø25 x Ø40 mm Rapid traverse (X / Z): 36 / 36 m/min Quill diameter: 60 mm Quill stroke: 80 mm Tailstock taper: MT 4 MACHINE DETAILS Control: Fanuc Oi-TD Total power requirement: 25 kVA Dimensions & weight Installation space approx.: 8.5 x 2.5 x 2.0 m Machine weight approx.: 3.2 t Operating hours Control on-time: approx. 26,932 h Cutting hours: approx. 7,546 h EQUIPMENT Documentation Chip conveyor Coolant unit Tailstock Parts catcher Signal lamp Hydraulic unit Three-jaw chuck SEOAM CAH-08 Collet chuck HAINBUCH nova size 65 Tool setting device Interface for bar feeder Bar loading magazine Breuning SIMAG 70.1-3000 Various tool holders

Condition: excellent (used), Year of construction: 1997, Control Fanuc Series 20-T Turning diameter 330 mm Bar diameter 42 mm Turning length 650 mm Speed 5,000 min-1 8-position turret Dcedpfx Aasyw Ukxsasf Minimum quantity lubrication

Condition: good (used), Year of construction: 2018, swing dia. 600 mm turning diameter 310 mm turning diameter over slide 355 mm spindle bore 78 mm bar capacity 65 mm turning speed range 4000 U/min turning length 521 mm travel -z axis 560 mm travel -x axis 220 mm turret (x-stations) 12 control Fanuc i c-axis 0,001° 0 Subspindle 5000 U/min travel -w axis 590 mm total power requirement 20 kVA weight of the machine ca. 5 t dimensions of the machine ca. LTH 3,7 x 1,7 x 1,9 m Well-maintained machine Spindle hours only 1,569 h Dcsdpfxsyw Tmfs Aaasf - 12-station driven tool turret, 5,000 rpm - Workpiece catching device - Automatically swiveling touch probe - 5,000 rpm counter spindle - Chip conveyor - Coolant pump Accessories: Includes 205 mm 3-jaw chuck Includes 3-jaw sub-spindle chuck Includes 2 x driven tool holders (radial + axial) Includes 10 x rigid tool holders Includes tool cabinet Includes various jaws Includes various turning tools Includes USB, LAN & RS232C interface

Condition: good (used), Year of construction: 2015, functionality: fully functional, Description: Dcedpfx Asywlvxoaajf The machine is in good technical condition. Testing is possible by prior agreement. The machine comes with a full set of accessories, plus a Spacesaver bar feeder. Spindle speed: 40–4000 rpm. X-axis travel: 175 mm, Z-axis travel: 330 mm. Drawbar diameter: 68 mm.

Condition: excellent (used), Year of construction: 2010, Winmax control Turning diameter 335 mm Turning length 550 mm Spindle speed 3000 rpm Tailstock 12-position turret with driven tools VDI 40 Chip conveyor, IRCO short bar loader IRS-RBK 1001 Tool measurement Dcedpfxsywfr Ts Aaaef Parts catcher

Condition: not inspected (used), functionality: unexamined, turning diameter over cross slide: 160 mm, turning length: 1,000 mm, turning diameter: 315 mm, spindle speed (max.): 3,300 rpm, bar passage: 52 mm, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nTurning diameter: 315 mm\nTurning diameter over cross slide: 160 mm\n\nTurning length: 1,000 mm\n\nSpindle speed range: 30 – 3,300 rpm\n\nSpindle bore: 52 mm\n\nNumber of tool changer positions: 12\n\nMACHINE DETAILS\n\nControl model: Siemens Sinumerik 802 D\n\nMachine weight: approx. 6 t\n\nNote: The machine has been overhauled! Dcedpoyv Aucofx Aaaof

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Included equipment valued at €20,000–24,000. * 4-axis machine. * Fully independent programmable tailstock with movement on the Z axis and clamping by M codes. * 12-station turret, all positions powered. * C axis. * Y axis. * Integrated main spindle motor: 18.5 / 22 kW. * Driven tool motor: 5.5 kW. * Motor starting torque: 620 Nm. * Integrated, beltless main spindle drive. * Main spindle nose size: A2-8. * Tailstock Morse taper: MT5. * Bar capacity: 75 mm. * Spindle chuck: Kitagawa B-210. * Box guideways on all axes. * Main spindle speed: 4,200 rpm. * Driven tool speed: 4,000 rpm. Dsdpfx Aaeyvz Nloajcf * Maximum swing diameter: 520 mm. * Maximum machining diameter: 380 mm. * Maximum machining length: 1,050 mm. * Headstock oil chiller. * IGF OSP P200-L conversational automatic programming system. * Automatic load monitoring and tool consumption display. * Parametric automatic anti-collision system for tools. * Tool life management and monitoring system. * Rapid traverse speed: 20 and 25 m/min in X and Z axes. * Turret indexing time: 0.2 seconds. * Renishaw automatic tool setting arm. * Communication ports: USB, PCMCIA card, and RS-232. * Dual pedal for main chuck and tailstock open/close. * Side-mounted chip conveyor, hinge-type. * Complete set of external and internal static toolholders. * Full set of axial and radial driven toolholders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operating manuals. * Weight: 6,200 kg. * Machine currently in operation. * Immediate availability unless already sold.

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm Dodpfsyvqdfex Aaaocf 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2011, 320mm max cutting diameter, Djdjyvhv Ejpfx Aaaocf 510mm swing, 305mm max turned length, 51mm bar capacity, 11kW motor, Fanuc Oi-Series Control, 3 Jaw Chuck, Tool setter, Parts Catcher, 12 Station turret, spindle speed 5000rpm, swarf conveyor, multifeed barfeed.

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS Control: CNC Fanuc I Series Turning diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Spindle Spindle bore: 53 mm Spindle speed: up to 6,000 rpm Drive power: 12 kW Axes X-axis travel: 175 mm (160 mm + 15 mm) Z-axis travel: 550 mm C-axis Tool Turret Turret: 12-position BMT 45 Driven tools: all 12 stations 2 x radial driven tool 2 x axial driven tool Chip conveyor Dcedpfxjyvgzts Aaasf MACHINE DETAILS Machine weight: 4 t LNS loader not included in the offer The machine has mainly operated in plastics!

Condition: good (used), Year of construction: 2008, turning length: 200 mm, turning diameter: 349 mm, Used Mazak Multiplex 6300Y CNC lathe Dcjdpfoyvgbxex Aaasf Max turning diameter approx. 350 mm Max turning length approx. 200 mm Gantry loader max 2 x 40 kilograms 2 spindles, 3 axes per spindle + Y axis, C axis + M spindle Gantry loader, loading magazine, discharge conveyor

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, turning length: 501 mm, turning diameter: 313 mm, travel distance X-axis: 196 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 715 mm, Fanuc Oi-TD cnc control main spindle: collet chuck device sub spindle: collet chuck device 12-fold revolver (BMT 55) C-axis Y-axis driven tools coolant device Dsdjyvd T Sopfx Aaaocf Technische Daten: / technical details Schwingdurchmesser / rotary diameter 707 mm Drehdurchmesser / turning diameter 313 mm Drehlänge / turning length 501 mm X-Weg / X-travel 196 mm Z-Weg / Z-travel 715 mm Y-Weg / Y-travel -25,4 / +65 mm max. Drehzahl Hauptspindel / max. spindle speed main spindle 5000 UpM /rpm max. Drehzahl Gegenspindel / max. spindle speed sub spindle 5000 UpM /rpm Anzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mm Antriebsleistung Hauptspindel (30min)/ drive capacity main spindle (30min) 15 kW Gewicht ca. / weight ca. 6120 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Colchester CNC 500 Lathe. S/No. M501599 Dodjyuv H Uspfx Aaaocf Location: This lot is located in Burton-on-Trent, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 1987, turning diameter 400 mm turning length 600 mm swing diameter 600 mm spindle bore 73 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Djdpfx Asyutrusaaocf If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team