Kirchner Agrar- und Kommunaltechnik GmbH
Kirchner Agrar- und Kommunaltechnik GmbH from Statzendorf
Auf einer Hallenfläche von 25000 m2 werden im Werk Anzenhof Dungstreuer, Güllefässer, Grossflächenstreuer, Güllemixer, Splittstreuer, Silagetransporter und Mulchgeräte produziert.
Mr Enes Alihodzic
Anzenhof 22 22
3125 Statzendorf
Austria
Current offers from similar dealers
Listing
Turkey
2,831 km
300/100 TON COLUMN TYPE HYDRAULIC PRESS
CRONOSSTECHCHKSP 300/100
CRONOSSTECHCHKSP 300/100
Call
Condition: new, Year of construction: 2025, pressing force: 300 t, table width: 1,000 mm, table length: 1,000 mm, clearance between the columns: 1,000 mm, retraction force: 100 t, stroke length: 800 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 300 / 100 Ton Four-Column Hydraulic Deep Drawing Press
General Description
The CRONOSSTECH 300 / 100 ton four-column hydraulic deep drawing press is a high-rigidity, four-column hydraulic press solution developed for metal forming, deep drawing, and precision pressing applications.
Its St52 grade steel frame undergoes stress-relieving via vibration, ensuring stable parallelism and perpendicularity tolerances throughout the full stroke. The ram and bolster systems operate independently; stroke length and tonnage settings can be precisely controlled via the touch panel interface.
Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and PLC-controlled structure, the machine provides high efficiency and reliable operation. The automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements.
With a 300 / 100 ton capacity, this model is an ideal industrial press solution for medium to high tonnage metal forming, deep drawing, and die applications.
Key Advantages
- High-rigidity four-column press frame
- Independent stroke and tonnage adjustment for ram and bolster
- Full control via touch panel
- High precision and repeatability
- Long lifespan, low maintenance design
Fields of Application
- Metal forming applications
- Deep drawing operations
- Die testing and production lines
- Auxiliary pressing processes
⚙️ STANDARD AND TECHNICAL SPECIFICATIONS
TYPE: Four-Column
FRAME MATERIAL: St52 – ERDEMİR
COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 300 Ton
CAPACITY (BOLSTER): 100 Ton
DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm
PARALLELISM TOLERANCE: 120 micron/m
PERPENDICULARITY TOLERANCE: 60 micron/m
STROKE (RAM): 800 mm
STROKE (BOLSTER): 200 mm
MIN. CLEARANCE: 100 mm
MAX. CLEARANCE: 900 mm
WELDING STRESS RELIEF: Vibration stress relief
WELDING PRACTICE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731)
MAX. WORKING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 30 kW – IE3
MAIN PUMP: 45 cm³ – REXROTH or PARKER
MOVING TABLE FAST DESCENT SPEED: 150 mm/s
FORMING SPEED: 12 mm/s
RETURN SPEED: 170 mm/s
BOLSTER TABLE FORWARD SPEED: 30 mm/s
Hodpfxjx N Unzj Ah Ueg
MAIN CYLINDER BORE: Ø 390 mm – Ck45
BOLSTER CYLINDER BORE: Ø 230 mm – Ck45
AUXILIARY BOOSTER CYLINDERS: 2 Units
APPROX. PRESS DIMENSIONS: 4000 × 1450 × 1450 mm
BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm
FRONT CHARGE VALVE: NG 125
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
PLC: DELTA
TOUCH PANEL: DELTA 7”
SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER
APPROX. WEIGHT: 18 Ton
Production Note
This machine is manufactured in Turkey by CRONOSSTECH.
Listing
Turkey
2,831 km
250/80 TON COLUMN TYPE HYDRAULIC DEEP DRAWING PRESS
CRONOSSTECHCHKSP 250/80
CRONOSSTECHCHKSP 250/80
Call
Condition: new, Year of construction: 2025, pressing force: 250 t, table width: 1,000 mm, table length: 1,000 mm, clearance between the columns: 1,000 mm, retraction force: 80 t, stroke length: 800 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 250 / 80 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS
General Description
The CRONOSSTECH 250 / 80 ton four-column hydraulic drawing press is a high-rigidity hydraulic solution designed for precision metal forming, deep drawing, and press applications.
The frame is constructed of St52 grade steel and undergoes stress relief through vibration, ensuring high parallelism and perpendicularity tolerances during long-term operation. The ram and cushion systems operate independently; stroke and pressure settings can be precisely adjusted via the touch panel.
With hydraulic components from REXROTH or PARKER, an IE3 efficiency-class motor, and PLC-controlled system, it offers high performance and reliable operation. An automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements.
With its 250 / 80 ton forming capacity, this model is an ideal industrial press solution for medium- and heavy-duty metal forming, deep drawing, and die applications.
Key Advantages
- Four-column, high-rigidity press frame
- Independent stroke and tonnage settings for the ram and cushion
- Full control via touch panel
- High precision and repeatability
- Long service life with low maintenance costs
Areas of Use
Hsdpfx Asx N Um Reh Ujg
- Metal forming applications
- Deep drawing operations
- Die testing and production lines
- Auxiliary pressing processes
⚙️ STANDARD AND TECHNICAL SPECIFICATIONS
TYPE: Four-column
FRAME MATERIAL: St52 – ERDEMIR
COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs. induction hardened chrome-plated shafts
SLIDE GUIDING: Bronze Zr14
CAPACITY (RAM): 250 Ton
CAPACITY (CUSHION): 80 Ton
DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm
PARALLELISM TOLERANCE: 120 micron/meter
PERPENDICULARITY TOLERANCE: 60 micron/meter
STROKE (RAM): 800 mm
STROKE (CUSHION): 200 mm
MIN. OPENING HEIGHT: 100 mm
MAX. OPENING HEIGHT: 900 mm
STRESS RELIEVING: Vibration stress relief
WELDING APPLICATION: WPQR & WPS accredited by TÜRK-AK – EN ISO 15614-1:2017 (EN ISO 14731)
MAX. WORKING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 22 kW – IE3 class
MAIN PUMP: 36 cm³ – REXROTH or PARKER
MOVABLE TABLE FAST DESCENT: 150 mm/sec
FORMING SPEED: 12 mm/sec
RETURN SPEED: 170 mm/sec
CUSHION TABLE FORWARD SPEED: 30 mm/sec
MAIN CYLINDER BORE: Ø 360 mm – Ck45
CUSHION CYLINDER BORE: Ø 200 mm – Ck45
AUXILIARY BOOST CYLINDERS: 2 units
APPROXIMATE PRESS DIMENSIONS: 4000 × 1450 × 1450 mm
BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm
FRONT CHARGING VALVE: NG 125
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
PLC: DELTA
TOUCH PANEL: DELTA 7”
ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER
APPROXIMATE WEIGHT: 16 Tons
Production Note
This machine is manufactured in Turkey by CRONOSSTECH.
Listing
Turkey
2,831 km
200/70 ton column type hydraulic deep drawing press
CRONOSSTECHCHKSP 200/70
CRONOSSTECHCHKSP 200/70
Call
Condition: new, Year of construction: 2025, pressing force: 200 t, table width: 1,000 mm, table length: 1,000 mm, clearance between the columns: 1,000 mm, retraction force: 70 t, stroke length: 800 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 200 / 70 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS
General Description
The CRONOSSTECH 200 / 70 ton four-column hydraulic deep drawing press is a high-rigidity, four-column hydraulic press designed for metal forming, deep drawing, and precision pressing applications.
The St52 grade welded steel frame is subjected to stress relief via vibration, ensuring high parallelism and perpendicularity tolerances are maintained over extended operation. The ram and blank holder (pot) systems are operated independently, with stroke and pressure settings precisely adjustable via touchscreen control panel.
Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and PLC-controlled structure, the system offers high efficiency and reliable operation. An automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements.
With its 200 / 70 ton capacity, this model provides an ideal industrial solution for medium and heavy-duty metal forming, deep drawing, and die applications.
Key Advantages
- Rigid four-column press frame
- Independent stroke and tonnage adjustment for ram and blank holder
- Full control via touchscreen panel
- High precision and repeatability
- Long-lasting, low-maintenance design
Applications
- Metal forming operations
- Deep drawing applications
- Die trial and production lines
- Auxiliary pressing operations
⚙️ STANDARD AND TECHNICAL SPECIFICATIONS
TYPE: Four-column
FRAME MATERIAL: St52 – ERDEMIR grade
COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction hardened and chrome plated
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 200 Ton
CAPACITY (BLANK HOLDER): 70 Ton
DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm
PARALLELISM TOLERANCE: 120 micron/meter
PERPENDICULARITY TOLERANCE: 60 micron/meter
STROKE (RAM): 800 mm
STROKE (BLANK HOLDER): 200 mm
MIN. OPENING HEIGHT: 100 mm
MAX. OPENING HEIGHT: 900 mm
WELDING STRESS RELIEF: By vibration
WELDING PROCEDURE: WPQR & WPS with TURK-AK accreditation – EN ISO 15614-1:2017 (EN ISO 14731)
MAX. WORKING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 22 kW – IE3
MAIN PUMP: 36 cm³ – REXROTH or PARKER
MOVING TABLE FAST DESCENT: 150 mm/sec
FORMING SPEED: 12 mm/sec
RETURN SPEED: 170 mm/sec
BLANK HOLDER FORWARD SPEED: 30 mm/sec
MAIN CYLINDER BORE: Ø 320 mm – Ck45
BLANK HOLDER CYLINDER BORE: Ø 190 mm – Ck45
AUXILIARY SPEED-UP CYLINDERS: 2 units
Hedpfxox N Umqe Ah Ujg
PRESS APPROX. DIMENSIONS: 4000 × 1450 × 1450 mm
LOWER TABLE HEIGHT FROM FLOOR: 1300 mm
MAIN CHARGE VALVE: NG 125
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
PLC: DELTA
TOUCHSCREEN PANEL: DELTA 7”
CONTROL COMPONENTS: SIEMENS – SCHNEIDER
APPROX. WEIGHT: 14.5 Ton
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
150/50 TON COLUMN TYPE HYDRAULIC DEEP DRAWING PRESS
CRONOSSTECHCHKSP 150/50
CRONOSSTECHCHKSP 150/50
Call
Condition: new, Year of construction: 2025, pressing force: 150 t, table width: 800 mm, table length: 800 mm, clearance between the columns: 800 mm, stroke length: 600 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 150/50 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS
General Description
The CRONOSSTECH 150/50 ton four-column hydraulic deep drawing press is an industrial press solution developed for metal spinning, deep drawing, and precision pressing applications, featuring a robust four-column frame construction.
The St52 grade steel construction frame undergoes stress relieving via vibration. This ensures high parallelism and vertical tolerance are maintained during prolonged operations. Ram and blank holder systems operate independently; stroke and pressure adjustments can be made precisely via the touchscreen panel.
Hodpfjx N Ul Tsx Ah Usg
Equipped with REXROTH or PARKER hydraulic equipment, an IE3 classified motor, and PLC control, the press delivers high efficiency, reliability, and long service life. Automatic lubrication and electronic filter contamination alerts minimize maintenance requirements.
With a 150/50 ton capacity, this model is an ideal solution for mass production, mold testing, and medium to heavy-duty deep drawing applications.
Key Advantages
- Rigid four-column press frame
- Independent stroke and tonnage adjustment for ram and blank holder
- Full control via touchscreen panel
- High precision and repeatability
- Low maintenance cost and long service life
Fields of Application
- Metal spinning processes
- Deep drawing applications
- Die testing and production processes
- Auxiliary pressing operations
⚙️ STANDARD AND TECHNICAL FEATURES
TYPE: Four-column
FRAME MATERIAL: St52 – ERDEMIR
COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction-hardened, chrome-plated shafts
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 150 ton
CAPACITY (BLANK HOLDER): 50 ton
DISTANCE BETWEEN COLUMNS: 800 × 800 mm
PARALLELISM TOLERANCE: 120 micron/meter
PERPENDICULARITY TOLERANCE: 60 micron/meter
STROKE (RAM): 600 mm
STROKE (BLANK HOLDER): 200 mm
MIN. DAYLIGHT: 100 mm
MAX. DAYLIGHT: 700 mm
WELDING STRESS RELIEF: Vibration stress relief
WELDING STANDARD: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731)
MAX. OPERATING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 18.5 kW – IE3
MAIN PUMP: 36 cm³ – REXROTH or PARKER
MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s
MOVABLE TABLE DRAWING SPEED: 12 mm/s
MOVABLE TABLE RETURN SPEED: 170 mm/s
BLANK HOLDER FORWARD SPEED: 30 mm/s
MAIN CYLINDER BORE: Ø 280 mm – Ck45
BLANK HOLDER CYLINDER BORE: Ø 160 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: 2 units
APPROXIMATE PRESS HEIGHT: 3800 mm
APPROXIMATE PRESS WIDTH: 1150 mm
APPROXIMATE PRESS DEPTH: 1150 mm
DISTANCE FROM FLOOR TO LOWER TABLE: 1200 mm
PRIMARY FILLING VALVE: NG 125
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
LUBRICATION TYPE: Automatic (adjustable from screen)
RAM / BLANK HOLDER STROKE AND TONNAGE ADJUSTMENT: Adjustable from screen
SYSTEM & PRESS STATUS INFORMATION: Viewable on screen
DIE MEMORY: Adjustable from screen
LINEAR DISPLACEMENT TRANSDUCER: NOVATECHNIK or TURCK
PLC APPLICATION: DELTA
TOUCHSCREEN PANEL: DELTA 7”
SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER
APPROXIMATE WEIGHT: 9 ton
Production Note
This machine is manufactured in Turkey by CRONOSSTECH.
Listing
Turkey
2,831 km
100/40TON Column Type Hydraulic Drawing Press
CRONOSSTECHCHKSP 100/40
CRONOSSTECHCHKSP 100/40
Call
Condition: new, Year of construction: 2025, pressing force: 100 t, table width: 800 mm, table length: 800 mm, clearance between the columns: 800 mm, retraction force: 40 t, stroke length: 600 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 100/40 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS
General Description
The CRONOSSTECH 100/40 ton four-column hydraulic deep drawing press is an industrial press solution designed for metal forming, deep drawing, and precision pressing applications, featuring a rigid four-column body construction.
The St52 grade steel frame is stress-relieved via vibration methods, ensuring long-term retention of high parallelism and squareness tolerances. The ram and bolster systems operate independently, with stroke and pressure settings precisely controlled via a touchscreen interface.
Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-controlled systems, it provides high efficiency, reliability, and extended service life. The automatic lubrication system and electronic filter contamination alerts keep maintenance requirements to a minimum.
This model is the ideal solution for medium-scale mass production, die testing, and precision forming applications.
Key Advantages
Hedox N Ulyepfx Ah Ujg
- Rigid four-column press frame
- Independent stroke and tonnage adjustment for ram and bolster
- Full control via touchscreen panel
- High precision and repeatability
- Low maintenance costs, long service life
Areas of Application
- Metal forming operations
- Deep drawing applications
- Die testing and prototype production
- Auxiliary pressing operations
⚙️ STANDARD AND TECHNICAL SPECIFICATIONS
TYPE: Four-column
FRAME MATERIAL: St52 – ERDEMİR
COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs. induction-hardened chrome-plated shafts
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 100 Ton
CAPACITY (BOLSTER): 40 Ton
DISTANCE BETWEEN COLUMNS: 800 × 800 mm
PARALLELISM TOLERANCE: 120 micron/m
SQUARENESS TOLERANCE: 60 micron/m
STROKE (RAM): 600 mm
STROKE (BOLSTER): 200 mm
MIN. DAYLIGHT: 100 mm
MAX. DAYLIGHT: 700 mm
WELDING STRESS RELIEF: Vibration stress relieving
WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731)
MAX. OPERATING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 15 kW – IE3
MAIN PUMP: 22 cm³ – REXROTH or PARKER
MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s
MOVABLE TABLE FORMING SPEED: 12 mm/s
MOVABLE TABLE RETURN SPEED: 170 mm/s
BOLSTER TABLE ADVANCE SPEED: 30 mm/s
MAIN CYLINDER BORE: Ø 230 mm – Ck45
BOLSTER CYLINDER BORE: Ø 145 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: 2 pcs
APPROX. PRESS HEIGHT: 3,500 mm
APPROX. PRESS WIDTH: 1,150 mm
APPROX. PRESS DEPTH: 1,150 mm
BOTTOM TABLE HEIGHT FROM FLOOR: 1,200 mm
PRE-FILL VALVE: NG 100
HYDRAULIC POWER UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
LUBRICATION TYPE: Automatic (adjustable via screen)
RAM / BOLSTER STROKE AND TONNAGE ADJUSTMENT: Adjustable from screen
SYSTEM & PRESS STATUS INFORMATION: Viewable on screen
DIE MEMORY: Adjustable via screen
LINEAR POSITION ENCODER: NOVATECHNIK or TURCK
PLC SYSTEM: DELTA
TOUCHSCREEN PANEL: DELTA 7”
SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER
APPROX. WEIGHT: 7.5 Ton
Manufacturing Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
80/30 TON COLUMN-TYPE HYDRAULIC DEEP DRAWING PRESS
CRONOSSTECHCHKSP 80/30
CRONOSSTECHCHKSP 80/30
Call
Condition: new, Year of construction: 2025, pressing force: 80 t, table width: 700 mm, table length: 700 mm, clearance between the columns: 700 mm, retraction force: 30 t, stroke length: 500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 80/30 Ton Four-Column Hydraulic Deep Drawing Press
General Description
The CRONOSSTECH 80/30 ton four-column hydraulic deep drawing press is an industrial press solution designed for high-precision metal forming, deep drawing, and die testing applications. It features a rigid four-column body structure for superior accuracy and repeatability.
The St52-grade steel frame is subjected to stress relief via vibration, ensuring excellent parallelism and perpendicularity tolerances are maintained during pressing operations. The ram and die cushion systems operate independently; stroke and pressure adjustments can be precisely controlled via the operator panel.
Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-based control, this press ensures long-lasting, safe, and energy-efficient performance. Maintenance requirements are minimized thanks to the automatic lubrication system and filter contamination alerts.
This model is ideal for small- and medium-scale serial production, die trials, and precision forming processes.
Key Advantages
- Rigid four-column press body design
- Independent stroke and tonnage settings for ram and die cushion
- Full control via touchscreen panel
- High repeatability and precision
- Low maintenance cost, long service life
Areas of Application
- Metal forming operations
- Deep drawing processes
- Die trial and prototype production
- Auxiliary pressing operations
⚙️ STANDARD AND TECHNICAL SPECIFICATIONS
TYPE: Four-column
BODY MATERIAL: St52 – ERDEMİR
COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction hardened, chrome-plated shafts
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 80 Tons
CAPACITY (DIE CUSHION): 30 Tons
DISTANCE BETWEEN COLUMNS: 700 × 700 mm
PARALLELISM TOLERANCE: 120 micron/meter
PERPENDICULARITY TOLERANCE: 60 micron/meter
STROKE (RAM): 500 mm
STROKE (DIE CUSHION): 150 mm
MIN. DAYLIGHT: 100 mm
MAX. DAYLIGHT: 600 mm
WELDING STRESS RELIEF: By vibration
WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731)
MAX. OPERATING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 11 kW – IE3
MAIN PUMP: 22 cm³ – REXROTH or PARKER
MOVABLE TABLE FAST DOWN SPEED: 150 mm/sec
Hsdjx N Ultjpfx Ah Ueg
MOVABLE TABLE DRAWING SPEED: 12 mm/sec
MOVABLE TABLE RETURN SPEED: 170 mm/sec
DIE CUSHION FORWARD SPEED: 30 mm/sec
MAIN CYLINDER BORE: Ø 200 mm – Ck45
DIE CUSHION CYLINDER BORE: Ø 125 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: 2 units
APPROXIMATE PRESS HEIGHT: 3300 mm
APPROXIMATE PRESS WIDTH: 1050 mm
APPROXIMATE PRESS DEPTH: 1050 mm
DISTANCE FROM FLOOR TO LOWER TABLE: 1100 mm
PRE-FILL VALVE: NG 100
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
LUBRICATION SYSTEM: Automatic (Adjustable from HMI)
RAM / DIE CUSHION STROKE AND TONNAGE ADJUSTMENT: Adjustable from HMI
SYSTEM & PRESS STATUS DISPLAY: Viewable on HMI
DIE MEMORY: Adjustable from HMI
LINEAR POSITION TRANSDUCER: NOVATECHNIK or TURCK
PLC: DELTA
TOUCH PANEL: DELTA 7”
ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER
APPROXIMATE WEIGHT: 5.5 Tons
Listing
Turkey
2,831 km
60/20 ton column-type hydraulic deep drawing press
CRONOSSTECHCHKSP 60/20
CRONOSSTECHCHKSP 60/20
Call
Condition: new, Year of construction: 2025, pressing force: 60 t, table width: 700 mm, table length: 700 mm, clearance between the columns: 700 mm, retraction force: 20 t, stroke length: 400 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 60/20 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS
General Description
The CRONOSSTECH 60/20 ton four-column hydraulic deep drawing press is a rigid and compact solution designed for precise metal forming, deep drawing, and metal spinning applications. Thanks to its four-column construction, the press maintains stable parallelism and perpendicularity tolerances throughout the pressing process.
The frame is constructed from St52 grade steel and subjected to stress relieving via vibration. Ram and blank holder systems can be controlled independently; stroke and pressure settings are finely adjusted via a touchscreen panel.
Equipped with REXROTH or PARKER hydraulic components, IE3 class motors, and an automatic lubrication system, it delivers long-lasting, safe, and efficient operation. The PLC-controlled system minimizes operator errors.
This model is an ideal solution for small to medium scale metal spinning, deep drawing, die testing, and auxiliary pressing tasks.
Key Advantages
- Rigid four-column press body
- Independent stroke and tonnage control for ram and blank holder
- System parameters can be set via touchscreen panel
- High precision and repeatability
- Low maintenance requirements and long service life
Applications
- Metal spinning operations
- Deep drawing processes
- Die testing and prototype production
- Metalworking and auxiliary production lines
⚙️ STANDARD & TECHNICAL SPECIFICATIONS
TYPE: Four-column
FRAME MATERIAL: St52 – ERDEMIR
COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs. induction-hardened and chrome-plated shafts
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 60 Ton
CAPACITY (BLANK HOLDER): 20 Ton
DISTANCE BETWEEN COLUMNS: 700 × 700 mm
PARALLELISM TOLERANCE: 120 micron/m
PERPENDICULARITY TOLERANCE: 60 micron/m
STROKE (RAM): 400 mm
STROKE (BLANK HOLDER): 100 mm
MIN. CLEARANCE: 100 mm
MAX. CLEARANCE: 500 mm
WELDING STRESS RELIEF: Vibratory stress relieving
WELDING APPLICATION: WPQR and WPS certified by TÜRK-AK per EN ISO 15614-1:2017 (EN ISO 14731)
MAX. OPERATING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 7.5 kW – IE3
MAIN PUMP: 22 cm³ – REXROTH or PARKER
MOVING TABLE FAST DOWN SPEED: 150 mm/s
MOVING TABLE DRAWING SPEED: 12 mm/s
MOVING TABLE RETURN SPEED: 170 mm/s
BLANK HOLDER TABLE FORWARD SPEED: 30 mm/s
MAIN CYLINDER BORE: Ø 175 mm – Ck45
BLANK HOLDER CYLINDER BORE: Ø 100 mm – Ck45
AUXILIARY FAST ADVANCE CYLINDERS: 2 units
Hjdjx N Ulgepfx Ah Usg
APPROX. PRESS HEIGHT: 3100 mm
APPROX. PRESS WIDTH: 1050 mm
APPROX. PRESS DEPTH: 1050 mm
DISTANCE FROM FLOOR TO LOWER TABLE: 1000 mm
MAIN FILLING VALVE: NG 100
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
LUBRICATION METHOD: Automatic (adjustable from panel)
RAM / BLANK HOLDER STROKE & TONNAGE CONTROL: Adjustable from panel
SYSTEM & PRESS STATUS MONITORING: On-screen display
DIE MEMORY: Adjustable via panel
LINEAR POSITION SENSOR: NOVATECHNIK or TURCK
PLC: DELTA
TOUCHSCREEN PANEL: DELTA 7”
ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER
APPROX. WEIGHT: 5 Ton
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
40/15 TON COLUMN-TYPE HYDRAULIC DEEP DRAWING PRESS
CRONOSSTECHCHKSP 40/15
CRONOSSTECHCHKSP 40/15
Call
Condition: new, Year of construction: 2025, pressing force: 40 t, table width: 700 mm, table length: 700 mm, clearance between the columns: 700 mm, retraction force: 15 t, stroke length: 400 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 40/15 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS
General Description
The CRONOSSTECH 40/15 ton four-column hydraulic drawing press is a compact and robust press solution designed for precision metal forming, deep drawing, and metal spinning applications. Thanks to its four-column frame construction, parallelism and perpendicularity tolerances remain stable throughout the pressing cycle.
The press frame, manufactured from St52 grade steel, undergoes stress relief via vibration treatment. The ram and punch systems can be controlled independently, with stroke and pressure adjustments performed precisely through the touchscreen panel.
Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and automatic lubrication system, this machine ensures long-lasting, safe, and efficient operation. The user-friendly PLC-controlled design minimizes operator errors.
This model is an ideal solution for small to medium-scale spinning, deep drawing, die trial, and precision pressing applications.
Key Advantages
- Rigid four-column press frame design
- Independent stroke and tonnage control for ram and pot
- Adjustable system via touchscreen panel
- High accuracy and repeatability
- Low maintenance requirements and long service life
Areas of Application
- Metal spinning applications
- Deep drawing processes
- Die testing and prototyping
- Metalworking and auxiliary production lines
⚙️ STANDARD AND TECHNICAL SPECIFICATIONS
TYPE: Four-column
FRAME MATERIAL: St52 – ERDEMIR
COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs. Induction-hardened and chrome-plated shafts
SLIDE BEARING: Bronze Zr14
CAPACITY (RAM): 40 Tons
CAPACITY (POT): 15 Tons
DISTANCE BETWEEN COLUMNS: 700 × 700 mm
Hedpfxox N Uk Ne Ah Usg
PARALLELISM TOLERANCE: 120 micron/m
PERPENDICULARITY TOLERANCE: 60 micron/m
STROKE (RAM): 400 mm
STROKE (POT): 100 mm
MIN. DAYLIGHT: 100 mm
MAX. DAYLIGHT: 500 mm
WELDING STRESS RELIEF: Vibration stress relief
WELDING PROCEDURE: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 (EN ISO 14731)
MAX. WORKING PRESSURE: 250 Bar
TOTAL MOTOR POWER: 5.5 kW – IE3
MAIN PUMP: 22 cm³ – REXROTH or PARKER
MOVING TABLE FAST DESCENT SPEED: 150 mm/sec
MOVING TABLE DRAWING SPEED: 12 mm/sec
MOVING TABLE RETURN SPEED: 170 mm/sec
POT TABLE FORWARD SPEED: 30 mm/sec
MAIN CYLINDER BORE DIAMETER: Ø 145 mm – Ck45
POT CYLINDER BORE DIAMETER: Ø 90 mm – Ck45
AUXILIARY ACCELERATION CYLINDERS: 2 units
APPROXIMATE PRESS HEIGHT: 3100 mm
APPROXIMATE PRESS WIDTH: 1050 mm
APPROXIMATE PRESS DEPTH: 1050 mm
DISTANCE FROM BASE TO LOWER TABLE: 1000 mm
PRE-FILL VALVE: NG 100
HYDRAULIC UNIT: REXROTH or PARKER
COOLING SYSTEM: EMMEGI – CIESSE – PARKER
OFF-LINE FILTRATION: REXROTH or PARKER
LUBRICATION TYPE: Automatic (adjustable from the panel)
RAM / POT STROKE AND TONNAGE ADJUSTMENT: Adjustable from the panel
SYSTEM & PRESS STATUS INFORMATION: Viewable from the panel
DIE MEMORY: Adjustable from the panel
LINEAR MEASURING SCALE: NOVATECHNIK or TURCK
PLC APPLICATION: DELTA
TOUCHSCREEN PANEL: DELTA 7”
SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER
APPROXIMATE WEIGHT: 4.5 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
H-type 2500/800 ton hydraulic deep drawing press
CRONOSSTECHCHSP 2500/800
CRONOSSTECHCHSP 2500/800
Call
Condition: new, Year of construction: 2025, pressing force: 2,500 t, table width: 1,800 mm, table length: 2,600 mm, retraction force: 800 t, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 2500/800
H-Type Hydraulic Deep Drawing (Forming) Press – 8-Gibbed
General Description
The CRONOSSTECH CHSP series H-type hydraulic forming presses are engineered for heavy-duty deep drawing applications that require extremely high tonnage, large bed dimensions, and precise blankholder force. The 8-gibbed H-frame structure ensures high rigidity throughout the pressing process, maintaining parallelism and perpendicularity tolerances over the entire stroke.
The CHSP 2500/800 model provides maximum stability, controlled material flow, and repeatable production performance for large and deep drawing dies, with a 2500-ton main ram and 800-ton blankholder capacity. Its vibration-stress-relieved welded steel frame is designed for durability and reliability in heavy industrial conditions.
⚙️ Standard Equipment
• Welded steel construction, 8-gibbed H-frame press body
• Vibration stress-relieved frame
• Bronze Zr14 gibbed slideways
• WPQR- and WPS-approved welding applications with TÜRK-AK accreditation
(EN ISO 15614-1:2017 / EN ISO 14731)
• PLC-controlled hydraulic system
• 7” touchscreen panel (DELTA)
• Adjustable stroke control for ram and blankholder
• Adjustable tonnage (pressure) control for ram and blankholder
• Automatic lubrication system
• Electronic filter contamination warning
• Hydraulic oil temperature and system status monitoring on-screen
• Off-line filtration and industrial cooling system
• SIEMENS – SCHNEIDER switchgear components
• Heavy-duty industrial safety systems
📐 Technical Specifications – CHSP 2500/800
Hodpfsx N Uk Aex Ah Ujg
Type: Welded steel construction, 8-gibbed H-frame press
Frame Material: St52 – ERDEMİR
Slideway Bearings: Bronze Zr14
Capacity (Ram / Blankholder): 2500 / 800 Ton
Moving / Fixed Table: 1800 × 2600 mm
Parallelism / Perpendicularity: 120 / 60 micron/meter
Stroke (Ram / Blankholder): 1000 / 350 mm
Daylight Opening (Min / Max): 200 / 1200 mm
Max. Working Pressure: 250 Bar
Total Motor Power: 180 kW – IE3
Main Pump: 140 cm³ – REXROTH or PARKER
Main Cylinder: Ø565 mm – Ck45 (4 units)
Blankholder Cylinder: Ø450 mm – Ck45 (2 units)
Pre-fill Valve: NG 200
PLC / Panel: DELTA / DELTA 7”
Approximate Weight: 132 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
H Type 2000/600 directional hydraulic deep drawing press
CRONOSSTECHCHSP 2000/600
CRONOSSTECHCHSP 2000/600
Call
Condition: new, Year of construction: 2025, pressing force: 2,000 t, table width: 1,500 mm, table length: 2,500 mm, retraction force: 600 t, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 2000/600
H-Type Hydraulic Deep Drawing (Stamping) Press – 8-Gib Design
General Description
The CRONOSSTECH CHSP Series H-type hydraulic deep drawing presses are engineered for heavy-duty deep drawing applications that require extremely high tonnage, large table dimensions, and controlled blank holder force. Thanks to its 8-gib H-frame construction, ram and table movements are carried out under high rigidity throughout the pressing cycle, maintaining strict parallelism and perpendicularity tolerances even across long strokes.
The CHSP 2000/600 model offers high precision and repeatability in large-volume die, deep drawing, and stamping operations with its 2000-ton main ram and 600-ton blank holder capacity. Its stress-relieved, steel-welded frame structure is designed for longevity and reliability under heavy industrial conditions.
⚙️ Standard Features
• Steel-welded construction, 8-gib H-frame press body
• Stress-relieved frame through vibration methods
• Zr14 bronze gib bushings
• WPQR and WPS certified welding by TÜRK-AK accredited standards (EN ISO 15614-1:2017 / EN ISO 14731)
• PLC-controlled hydraulic system
• 7” DELTA touchscreen panel
• Adjustable ram and blank holder stroke controls
• Adjustable tonnage (pressure) control for ram and blank holder
• Automatic lubrication system
• Electronic hydraulic filter contamination warning
• On-screen monitoring of hydraulic oil temperature and system status
• Offline filtration and industrial cooling system
Hsdpfx Aex N Ukveh Uog
• SIEMENS – SCHNEIDER electrical components
• Industrial safety systems for operator protection
📐 Technical Specifications – CHSP 2000/600
Type: Steel-welded, 8-gib H-frame press body
Frame Material: St52 – ERDEMİR
Gib Bushings: Zr14 bronze
Capacity (Ram / Blank Holder): 2000 / 600 tons
Moving / Fixed Table: 1500 × 2500 mm
Parallelism / Perpendicularity: 120 / 60 microns/m
Stroke (Ram / Blank Holder): 1000 / 350 mm
Daylight (Min / Max): 200 / 1200 mm
Max. Working Pressure: 250 bar
Total Motor Power: 180 kW – IE3
Main Pump: 140 cm³ – REXROTH or PARKER
Main Cylinder: Ø720 mm – Ck45 (2 pcs)
Blank Holder Cylinder: Ø390 mm – Ck45 (2 pcs)
Pre-Fill Valve: NG 200
PLC / Panel: DELTA / DELTA 7”
Approximate Weight: 105 tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
H type 1500/500 ton hydraulic deep drawing press
CRONOSSTECHCHSP 1500/500
CRONOSSTECHCHSP 1500/500
Call
Condition: new, Year of construction: 2025, pressing force: 1,500 t, table width: 1,500 mm, table length: 2,400 mm, retraction force: 500 t, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 1500/500
H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered for maximum frame rigidity, precise parallelism, and long-lasting operation in high-tonnage deep drawing applications requiring large bolster dimensions. Thanks to the 8-guide H-frame body, the ram and table movements remain controlled and stable throughout the pressing process.
The CHSP 1500/500 model, with 1500-ton main ram and 500-ton blank holder capacity, is developed for large-dimension dies, deep drawing, and precise forming operations. The vibration stress-relieved welded steel frame delivers high durability and reliability under heavy-duty industrial conditions.
⚙️ Standard Equipment
• Welded steel construction, 8-guide H-frame design
• Vibration stress-relieved frame structure
• Bronze Zr14 slide bearings
• WPQR and WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731)
• PLC-controlled hydraulic system
• Touchscreen panel (DELTA 7”)
• Adjustable ram and blank holder stroke control
• Adjustable ram and blank holder tonnage (pressure) control
• Automatic lubrication system
• Electronic contamination warning for the filter
• Monitoring of hydraulic oil temperature and system status via display
• Off-line filtering and industrial cooling system
• SIEMENS – SCHNEIDER electrical components
• Industrial safety systems for operator protection
📐 Technical Specifications – CHSP 1500/500
Type: Welded steel construction, 8-guide H-frame design
Frame Material: St52 – ERDEMİR
Guide Bearings: Bronze Zr14
Hsdpfox N Ukiex Ah Ueg
Capacity (Ram / Blank Holder): 1500 / 500 tons
Moving / Fixed Table: 1500 × 2400 mm
Parallelism / Perpendicularity: 120 / 60 micron/meter
Stroke (Ram / Blank Holder): 1000 / 350 mm
Daylight Opening (Min / Max): 200 / 1200 mm
Max. Operating Pressure: 250 bar
Total Motor Power: 90 kW – IE3
Main Pump: 101 cm³ – REXROTH or PARKER
Main Cylinder: Ø620 mm – Ck45 (2 units)
Blank Holder Cylinder: Ø360 mm – Ck45 (2 units)
Pre-Fill Valve: NG 200
PLC / Panel: DELTA / DELTA 7”
Approximate Weight: 87 tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
H-type 1200/400 ton hydraulic deep drawing press
CRONOSSTECHCHSP 1200/400
CRONOSSTECHCHSP 1200/400
Call
Condition: new, Year of construction: 2025, pressing force: 1,200 t, table width: 1,500 mm, table length: 2,000 mm, retraction force: 400 t, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 1200/400
H-Type Hydraulic Deep Drawing (Stamping) Press – 8 Guideways
General Description
The CRONOSSTECH CHSP series H-type hydraulic stamping and deep drawing presses are designed to deliver maximum rigidity, precision, and process control in sheet metal forming applications requiring high tonnage.
The 8-guideway H-frame structure ensures stable maintenance of parallelism and perpendicularity tolerances even with large table dimensions.
The CHSP 1200/400 model, featuring a 1200-ton main ram and a 400-ton blank holder capacity, is tailored for heavy industry applications requiring deep drawing, stamping, and controlled material flow. Its vibration-stress-relieved steel construction frame guarantees long-lasting and reliable performance.
⚙️ Standard Equipment
• Steel construction, 8 guideway H-frame press body
• Vibration stress-relieved frame structure
• Bronze Zr14 gib guides
• WPQR and WPS certified welding by TURKAK-accredited institutions
(EN ISO 15614-1:2017 / EN ISO 14731)
• PLC-controlled hydraulic system
• 7'' DELTA touchscreen panel
• Adjustable ram and blank holder stroke control
• Adjustable ram and blank holder tonnage (pressure) control
• Automatic lubrication system
• Electronically controlled filter contamination warning
• Monitoring of hydraulic unit oil temperature and system status on screen
• Offline filtration and industrial cooling system
• SIEMENS – SCHNEIDER industrial switchgear
• Industrial safety features for operator protection
Hedpfx Ahox N Uirj Usg
📐 Technical Specifications – CHSP 1200/400
Type: Steel construction, 8 guideway H-frame body type
Frame Material: St52 – ERDEMIR
Gib Guide Material: Bronze Zr14
Capacity (Ram): 1200 Tons
Capacity (Blank Holder): 400 Tons
Moving / Fixed Table: 1500 × 2000 mm
Parallelism / Perpendicularity: 120 / 60 micron/meter
Stroke (Ram / Blank Holder): 1000 / 350 mm
Clearance (Min / Max): 100 / 1100 mm
Max. Working Pressure: 250 Bar
Total Motor Power: 75 kW – IE3
Main Pump: 70 cm³ – REXROTH or PARKER
Main Cylinder: Ø560 mm – Ck45 (2 units)
Blank Holder Cylinder: Ø450 mm – Ck45
Pre-fill Valve: NG 200
PLC / Panel: DELTA / DELTA 7”
Approximate Weight: 75 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
H-Type 1000/350 Ton Hydraulic Deep Drawing Press
CRONOSSTECHCHSP 1000/350
CRONOSSTECHCHSP 1000/350
Call
Condition: new, Year of construction: 2025, pressing force: 1,000 t, table width: 1,500 mm, table length: 2,000 mm, retraction force: 350 t, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 1000/350
H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slides
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting (ram + blank holder) system architecture for high-tonnage sheet metal forming, deep drawing, and spinning applications. Thanks to its 8-guide H-frame structure, high rigidity is ensured during pressing operations, and parallelism and perpendicularity tolerances are consistently maintained even with large bed dimensions.
The CHSP 1000/350 model, featuring a 1000-ton main ram and 350-ton blank holder capacity, is specifically designed for deep drawing processes requiring controlled material flow—ideal for applications in automotive, white goods, defense, and heavy industries. The welded steel construction, stress-relieved by vibration, guarantees long-term, reliable operation.
Hsdpfx Ahox N Uile Ueg
⚙️ Standard Equipment
• Welded steel construction, 8-guide H-frame press body
• Vibration stress-relieved frame structure
• Bronze Zr14 slide bearings
• WPQR and WPS certified welding, TÜRK-AK accredited (EN ISO 15614-1:2017 / EN ISO 14731)
• PLC-controlled hydraulic system
• 7” DELTA touchscreen control panel
• Adjustable ram and blank holder (pot) stroke control
• Adjustable ram and blank holder (pot) tonnage (pressure) control
• Automatic lubrication system
• Electronically monitored filter contamination warning
• On-screen monitoring of hydraulic unit oil temperature and system status
• Off-line filtration and cooling system
• SIEMENS – SCHNEIDER electrical components
• Safety systems for operator protection
📐 Technical Specifications – CHSP 1000/350
Type: Welded steel construction, 8-guide H-frame press body
Frame Material: St52 – ERDEMİR
Slide Bearing: Bronze Zr14
Capacity (Ram): 1000 tons
Capacity (Blank Holder): 350 tons
Moving/Fixed Table: 1500 × 2000 mm
Parallelism / Perpendicularity: 120 / 60 micron/meter
Stroke (Ram / Blank Holder): 1000 / 350 mm
Daylight Opening (Min / Max): 100 / 1100 mm
Max. Operating Pressure: 250 Bar
Total Motor Power: 75 kW – IE3
Main Pump: 70 cm³ – REXROTH or PARKER
Main Cylinder: Ø500 mm – Ck45 (2 units)
Blank Holder Cylinder: Ø370 mm – Ck45
Pre-Fill Valve: NG 200
PLC / Panel: DELTA / DELTA 7”
Approximate Weight: 65 tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
H-type 800/270 ton hydraulic deep drawing press
CRONOSSTECHCHSP 800/270
CRONOSSTECHCHSP 800/270
Call
Condition: new, Year of construction: 2025, pressing force: 800 t, table width: 1,500 mm, table length: 2,000 mm, retraction force: 270 t, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 800/270
Hsdjx N Uh Ujpfx Ah Uog
H-Type Hydraulic Deep Drawing (Sinking) Press – 8-Guided
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed based on the double-acting principle (ram + blank holder) for high-tonnage sheet metal forming, deep drawing, and sinking applications.
The 8-guided H-frame structure offers high rigidity, stable parallelism, and extended die life even with large table dimensions during the pressing process.
The CHSP 800/270 model, with its 800-ton main ram and 270-ton blank holder capacity, is specifically engineered for processes requiring controlled material flow in automotive, white goods, defense industry, and heavy sheet metal forming applications. The vibration stress-relieved steel frame ensures long-lasting and reliable operation.
⚙️ Standard Equipment
• Steel construction, 8-guided H-type press frame
• Vibration stress-relieved body structure
• Bronze Zr14 slide bearings
• WPQR and WPS certified welding (accredited by TÜRK-AK)
(EN ISO 15614-1:2017 / EN ISO 14731)
• PLC controlled hydraulic system
• Touch panel display (DELTA 7”)
• Adjustable ram and blank holder stroke control
• Adjustable ram and blank holder tonnage (pressure) control
• Automatic lubrication system
• Electronically monitored filter contamination alert
• Real-time monitoring of hydraulic unit oil temperature and system status via screen
• Off-line filtration and cooling system
• SIEMENS – SCHNEIDER electrical components
• Operator safety systems for maximum protection
📐 Technical Specifications – CHSP 800/270
Type: Steel construction, 8-guided H-type press frame
Frame Material: St52 – ERDEMİR
Slide Bearings: Bronze Zr14
Capacity (Ram): 800 Tons
Capacity (Blank Holder): 270 Tons
Moving Table Size: 1500 × 2000 mm
Fixed Table Size: 1500 × 2000 mm
Parallelism Tolerance: 120 micron/meter
Perpendicularity Tolerance: 60 micron/meter
Stroke (Ram): 1000 mm
Stroke (Blank Holder): 350 mm
Min. / Max. Daylight: 100 / 1100 mm
Max. Working Pressure: 250 Bar
Total Motor Power: 75 kW – IE3
Main Pump: 70 cm³ – REXROTH or PARKER
Main Cylinder: Ø390 mm – Ck45 (2 units)
Blank Holder Cylinder: Ø370 mm – Ck45
Pre-fill Valve: NG 200
PLC: DELTA
Touch Panel: DELTA 7”
Approximate Weight: 54 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
H-type 600/200 ton hydraulic deep drawing press
CRONOSSTECHCHSP 600/200
CRONOSSTECHCHSP 600/200
Call
Condition: new, Year of construction: 2025, pressing force: 600 t, table width: 1,200 mm, table length: 1,500 mm, retraction force: 200 t, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 600/200
H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways
Hjdpfx Aex N Uhzsh Uog
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-guideway H-frame structure provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the extended stroke length.
Model CHSP 600/200, featuring a 600-ton main ram and a 200-ton blankholder (cushion) capacity, is designed to ensure full control over the die and component during high-tonnage deep drawing and spinning operations. The frame structure is stress-relieved by vibration for durable and reliable performance.
⚙️ Standard Equipment
- Welded steel construction, 8-guideway H-frame press body
- Vibration stress-relieved frame structure
- Bronze Zr14 slide bearings
- WPQR and WPS certified welding by TÜRK-AK-accredited procedures (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing to CE standards
- PLC-controlled hydraulic system
- Touch panel display (DELTA 7”)
- Adjustable ram and cushion stroke control
- Adjustable ram and cushion tonnage (pressure) control
- Automatic lubrication system
- Electronically monitored filter clogging warning
- On-screen display of hydraulic unit oil temperature and system status
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER electrical components
📐 Technical Specifications — CHSP 600/200
- Type: Welded steel, 8-guideway H-frame press body
- Frame Material: St52 – ERDEMİR grade
- Slide Bearings: Bronze Zr14
- Capacity (Ram): 600 tons
- Capacity (Cushion): 200 tons
- Movable Table Size: 1200 × 1500 mm
- Fixed Table Size: 1200 × 1500 mm
- Parallelism Tolerance: 120 micron/meter
- Perpendicularity Tolerance: 60 micron/meter
- Ram Stroke: 1000 mm
- Cushion Stroke: 350 mm
- Min. Daylight: 100 mm
- Max. Daylight: 1100 mm
- Weld Stress Relief: By vibration
- Welding: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1:2017), supervised by certified “welding coordination engineers” (EN ISO 14731)
- Max. Working Pressure: 250 bar
- Total Motor Power: 55 kW – IE3
- Main Pump: 70 cm³ – REXROTH or PARKER
- Movable Table Fast Down Speed: 150 mm/s
- Movable Table Drawing Speed: 12 mm/s
- Movable Table Return Speed: 170 mm/s
- Cushion Advance Speed: 30 mm/s
- Main Cylinder Bore: Ø550 mm – Ck45
- Cushion Cylinder Bore: Ø320 mm – Ck45
- Auxiliary Acceleration Cylinders: 2 units
- Approx. Press Height: 5900 mm
- Approx. Press Width: 3250 mm
- Approx. Press Depth: 2300 mm
- Lower Table Height from Floor: 1400 mm
- Pre-fill Valve: NG 150
- Hydraulic Power Unit: REXROTH or PARKER
- Cooling System: EMMEGI – CIESSE – PARKER
- Off-line Filtration: REXROTH or PARKER
- Linear Scale: NOVATECHNIK or TURCK
- PLC System: DELTA
- Touch Panel Screen: DELTA 7”
- Electrical Components: SIEMENS – SCHNEIDER
- Approx. Weight: 35 tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
H Type 500/175 ton hydraulic deep drawing press
CRONOSSTECHCHSP 500/175
CRONOSSTECHCHSP 500/175
Call
Condition: new, Year of construction: 2025, pressing force: 500 t, table width: 1,200 mm, table length: 1,500 mm, retraction force: 175 t, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 500/175
H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming applications. The 8-guide H-frame construction provides maximum rigidity during the pressing process; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke.
Hodpfx Ahex N Uhue Ujg
The CHSP 500/175 model features a 500-ton main ram and a 175-ton cushion ram (pot), designed to deliver complete control over the die and workpiece for high-tonnage deep drawing and forming operations. The machine frame is stress-relieved by vibration to ensure a durable and reliable operation.
⚙️ Standard Equipment
- Steel construction, 8-guide H-frame press body
- Stress-relieved frame by vibration
- Bronze Zr14 slide bushings
- WPQR and WPS certified welding applications, accredited by TÜRK-AK
(EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing compliant with CE standards
- PLC-controlled hydraulic system
- 7” DELTA touchscreen panel
- Adjustable ram and cushion stroke control
- Adjustable ram and cushion tonnage (pressure) control
- Automatic lubrication system
- Electronic filter contamination alert
- Monitoring of hydraulic unit oil temperature and system status on the display
- Cooling system
- Off-line filtration
- Integrated operator safety systems
- SIEMENS – SCHNEIDER electrical components
📐 Technical Specifications – CHSP 500/175
- Type: Steel construction, 8-guide H-frame press body
- Frame Material: St52 – ERDEMIR
- Guide Bushing: Bronze Zr14
- Capacity (Ram): 500 Ton
- Capacity (Cushion): 175 Ton
- Moving Table Size: 1200 × 1500 mm
- Fixed Table Size: 1200 × 1500 mm
- Parallelism Tolerance: 120 micron/m
- Perpendicularity Tolerance: 60 micron/m
- Stroke (Ram): 1000 mm
- Stroke (Cushion): 350 mm
- Min. Daylight: 100 mm
- Max. Daylight: 1100 mm
- Stress Relief: Vibration stress relief
- Welding: WPQR and WPS certified by TÜRK-AK
EN ISO 15614-1/2017
(Welding procedures monitored by “welding coordination engineers” certified under EN ISO 14731)
- Max. Operating Pressure: 250 Bar
- Total Motor Power: 45 kW – IE3
- Main Pump: 70 cm³ – REXROTH or PARKER
- Moving Table Fast Approach Speed: 150 mm/s
- Moving Table Forming Speed: 12 mm/s
- Moving Table Return Speed: 170 mm/s
- Cushion Table Forward Speed: 30 mm/s
- Main Cylinder Bore: Ø500 mm – Ck45
- Cushion Cylinder Bore: Ø300 mm – Ck45
- Auxiliary Acceleration Cylinders: 2 units
- Approx. Height: 5800 mm
- Approx. Width: 3250 mm
- Approx. Depth: 2200 mm
- Lower Table Height from Floor: 1400 mm
- Pre-fill Valve: NG 150
- Hydraulic Unit: REXROTH or PARKER
- Cooling System: EMMEGI – CIESSE – PARKER
- Off-line Filtration: REXROTH or PARKER
- Linear Scale: NOVATECHNIK or TURCK
- PLC: DELTA
- Touchscreen: DELTA 7”
- Electrical Components: SIEMENS – SCHNEIDER
- Approx. Weight: 26 Ton
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
H-TYPE 400/150 TON HYDRAULIC DEEP DRAW PRESS
CRONOSSTECHCHSP 400/150
CRONOSSTECHCHSP 400/150
Call
Condition: new, Year of construction: 2025, pressing force: 400 t, table width: 1,200 mm, table length: 1,500 mm, retraction force: 150 t, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 400/150
H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guideways
General Description
The CRONOSSTECH CHSP series H-Type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming applications. The H-frame structure with 8 guideways provides maximum rigidity during the pressing cycle, and maintains parallelism and perpendicularity tolerances consistently over long strokes.
The CHSP 400/150 model, with a 400-ton main ram and 150-ton blank holder ram (pot), is designed for deep drawing and forming applications that require high tonnage. The frame is stress-relieved by vibration to ensure long-term durability and reliable operation.
⚙️ Standard Equipment
- Steel construction, H-frame body with 8 guideways
- Stress-relieved frame via vibration
- Bronze Zr14 guide slippers
- WPQR and WPS approved welding by TÜRK-AK accredited certification
(EN ISO 15614-1:2017 / EN ISO 14731)
Hedpfox N Uhhex Ah Ujg
- Design and manufacturing conform to CE standards
- PLC-controlled hydraulic system
- 7” DELTA touchscreen panel
- Adjustable ram and blank holder (pot) stroke control
- Adjustable ram and pot tonnage (pressure) control
- Automatic lubrication system
- Electronic filtration contamination warning
- Monitoring of hydraulic unit oil temperature and system status on display
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER switchgear components
📐 Technical Specifications – CHSP 400/150
Type: Steel construction, H-frame body with 8 guideways
Frame Material: St52 – ERDEMIR
Guideway Liners: Bronze Zr14
Capacity (Ram): 400 Tons
Capacity (Pot): 150 Tons
Moving Table Dimensions: 1200 × 1500 mm
Fixed Table Dimensions: 1200 × 1500 mm
Parallelism Tolerance: 120 microns/m
Perpendicularity Tolerance: 60 microns/m
Stroke (Ram): 1000 mm
Stroke (Pot): 350 mm
Min. Open Height: 100 mm
Max. Open Height: 1100 mm
Stress Relieving: Vibration method
Welding Application: WPQR & WPS approved by TÜRK-AK accreditation
EN ISO 15614-1:2017
(Welding applications are supervised by certified "welding coordination engineers" per EN ISO 14731)
Max. Working Pressure: 250 Bar
Total Motor Power: 37 kW – IE3
Main Pump: 45 cm³ – REXROTH or PARKER
Rapid Descent Speed (Movable Table): 150 mm/s
Forming Speed (Movable Table): 12 mm/s
Return Speed (Movable Table): 170 mm/s
Forward Speed (Pot Table): 30 mm/s
Main Cylinder Internal Diameter: Ø450 mm – Ck45
Pot Cylinder Internal Diameter: Ø280 mm – Ck45
Auxiliary Acceleration Cylinders: 2 units
Approx. Press Height: 5600 mm
Approx. Press Width: 3250 mm
Approx. Press Depth: 2200 mm
Lower Table Height from Floor: 1400 mm
Pre-fill Valve: NG 150
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Position Transducer: NOVATECHNIK or TURCK
PLC System: DELTA
Touch Screen Panel: DELTA 7”
Switchgear: SIEMENS – SCHNEIDER
Approx. Weight: 24 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
H-type 300/100 ton hydraulic deep drawing press
CRONOSSTECHCHSP 300/100
CRONOSSTECHCHSP 300/100
Call
Condition: new, Year of construction: 2025, pressing force: 300 t, table width: 1,200 mm, table length: 1,500 mm, retraction force: 100 t, stroke length: 800 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, RONOSSTECH CHSP 300/100
H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses have been developed with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The H-frame structure with 8 guideways provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke.
The CHSP 300/100 model, featuring a 300-ton main ram and a 100-ton bottom cushion ram (pot), is specially designed for deep drawing and spinning operations requiring high tonnage. The frame construction is stress-relieved using vibration methods for long life and reliable performance.
⚙️ Standard Equipment
- Steel construction, H-frame with 8 guideways
- Vibration stress-relieved frame
- Bronze Zr14 slide bearings
- WPQR and WPS certified welding applications accredited by TURK-AK (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacture in compliance with CE standards
- PLC-controlled hydraulic system
- Touchscreen panel (DELTA 7”)
- Adjustable stroke control for both ram and cushion (pot)
- Adjustable tonnage (pressure) control for ram and cushion (pot)
- Automatic lubrication system
- Electronic filter contamination alert
- Display of hydraulic unit oil temperature and system status on screen
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER switching components
📐 Technical Specifications – CHSP 300/100
- Type: Steel construction, H-frame with 8 guideways
- Body Material: St52 – ERDEMİR
- Slideway Bearings: Bronze Zr14
- Capacity (Ram): 300 Ton
- Capacity (Cushion): 100 Ton
- Movable Table Size: 1200 × 1500 mm
- Fixed Table Size: 1200 × 1500 mm
- Parallelism Tolerance: 120 micron/m
- Perpendicularity Tolerance: 60 micron/m
- Stroke (Ram): 800 mm
- Stroke (Cushion): 300 mm
- Min. Clearance: 100 mm
- Max. Clearance: 900 mm
- Stress Relief: Vibration stress relief
- Welding Application: WPQR and WPS certified by TURK-AK
EN ISO 15614-1:2017
(Welding applications are supervised by "welding coordination engineers" certified as per EN ISO 14731)
- Max. Working Pressure: 250 Bar
- Total Motor Power: 37 kW – IE3
- Main Pump: 45 cm³ – REXROTH or PARKER
- Movable Table Fast Down Speed: 150 mm/s
- Movable Table Spinning Speed: 12 mm/s
- Movable Table Return Speed: 170 mm/s
- Cushion Table Forward Speed: 30 mm/s
- Main Cylinder Bore: Ø390 mm – Ck45
Hodpfx Aex N Uhbsh Ujg
- Cushion Cylinder Bore: Ø230 mm – Ck45
- Auxiliary Acceleration Cylinders: 2 units
- Approx. Height: 4400 mm
- Approx. Width: 3250 mm
- Approx. Depth: 2200 mm
- Bottom Table Height from Floor: 1350 mm
- Pre-fill Valve: NG 150
- Hydraulic Unit: REXROTH or PARKER
- Cooling System: EMMEGI – CIESSE – PARKER
- Off-line Filtration: REXROTH or PARKER
- Linear Distance Scale: NOVATECHNIK or TURCK
- PLC Application: DELTA
- Touchscreen Panel: DELTA 7”
- Switching Components: SIEMENS – SCHNEIDER
- Approximate Weight: 21 Ton
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
H-Type 250/80 Ton Hydraulic Deep Drawing Press
CRONOSSTECHCHSP 250/80
CRONOSSTECHCHSP 250/80
Call
Condition: new, Year of construction: 2025, pressing force: 250 t, table width: 1,200 mm, table length: 1,500 mm, retraction force: 80 t, stroke length: 800 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 250/80
H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slides
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-slide H-frame structure provides maximum rigidity during the pressing process, while parallelism and perpendicularity tolerances are consistently maintained throughout the stroke.
The CHSP 250/80 model, featuring a 250-ton main ram and an 80-ton lower cushion (pot) capacity, is designed for medium to high tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration to guarantee long-lasting, reliable performance.
⚙️ Standard Equipment
- Steel construction, 8-slide H-frame press design
- Vibration-stress-relieved frame structure
- Bronze Zr14 slide bearings
- WPQR and WPS certified welding by TÜRK-AK accredited procedures
(EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing in compliance with CE standards
- PLC-controlled hydraulic system
- 7” DELTA touchscreen panel
- Adjustable stroke control for ram and cushion (pot)
- Adjustable ram and cushion tonnage (pressure) control
- Automatic lubrication system
- Electronic filter contamination indicator
- On-screen monitoring of hydraulic unit oil temperature and system status
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER switchgear
📐 Technical Specifications – CHSP 250/80
Type: Steel construction, 8-slide H-frame press
Frame Material: St52 – ERDEMIR
Slide Bearings: Bronze Zr14
Capacity (Ram): 250 Ton
Capacity (Cushion): 80 Ton
Hjdsx N Uaqspfx Ah Uog
Moving Table Size: 1200 × 1500 mm
Fixed Table Size: 1200 × 1500 mm
Parallelism Tolerance: 120 micron/meter
Perpendicularity Tolerance: 60 micron/meter
Ram Stroke: 800 mm
Cushion Stroke: 300 mm
Min. Daylight: 100 mm
Max. Daylight: 900 mm
Stress Relief: Vibration stress relief
Welding Certification: WPQR and WPS by TÜRK-AK accreditation
EN ISO 15614-1/2017
(Welding procedures are overseen by certified “welding coordination engineers” per EN ISO 14731)
Max. Working Pressure: 250 Bar
Total Motor Power: 37 kW – IE3
Main Pump: 45 cm³ – REXROTH or PARKER
Moving Table Fast Down Speed: 150 mm/s
Moving Table Drawing Speed: 12 mm/s
Moving Table Return Speed: 170 mm/s
Cushion Forward Speed: 30 mm/s
Main Cylinder Bore: Ø360 mm – Ck45
Cushion Cylinder Bore: Ø200 mm – Ck45
Auxiliary Acceleration Cylinders: 2 pcs
Approx. Press Height: 4200 mm
Approx. Press Width: 3250 mm
Approx. Press Depth: 2200 mm
Lower Table Height from Floor: 1350 mm
Pre-fill Valve: NG 125
Hydraulic Power Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Distance Measurement: NOVATECHNIK or TURCK
PLC System: DELTA
Touchscreen Panel: DELTA 7”
Switchgear: SIEMENS – SCHNEIDER
Approx. Weight: 18 Ton
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
H TYPE 200/70 TON HYDRAULIC DEEP DRAWING PRESS
CRONOSSTECHCHSP 200/70
CRONOSSTECHCHSP 200/70
Call
Condition: new, Year of construction: 2025, pressing force: 200 t, table width: 1,000 mm, table length: 1,200 mm, retraction force: 70 t, stroke length: 800 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 200/70
H-Type Hydraulic Deep Drawing (Flanging) Press – 8 Slideways
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and flanging applications. The 8-slideway H-frame construction provides maximum rigidity during pressing operations, maintaining parallelism and perpendicularity tolerances consistently throughout the stroke.
The CHSP 200/70 model, featuring a 200-ton main ram and a 70-ton lower blank holder (pot) capacity, is engineered for medium-to-high tonnage deep drawing and flanging processes. The frame structure undergoes vibratory stress relief for long-lasting and reliable performance.
⚙️ Standard Equipment
- Steel construction, H-frame press body with 8 slideways
- Vibratory stress-relieved frame
- Bronze Zr14 slideway bearings
- Welding processes verified by TÜRK-AK accredited WPQR and WPS certificates
(EN ISO 15614-1:2017 / EN ISO 14731 compliant)
- Design and manufacturing in accordance with CE standards
- PLC-controlled hydraulic system
- 7” DELTA touchscreen panel
- Adjustable ram and pot stroke control
- Adjustable ram and pot tonnage (pressure) control
- Automatic lubrication system
- Electronically monitored filter contamination warning
- On-screen monitoring of hydraulic unit oil temperature and system status
- Cooling system
- Off-line filtration
- Safety interlock systems for operator protection
- SIEMENS – SCHNEIDER switchgear components
📐 Technical Specifications – CHSP 200/70
Type: Steel construction, H-frame with 8 slideways
Frame Material: St52 – ERDEMIR
Hodpfxjx N T U Te Ah Ujg
Slideway Bearings: Bronze Zr14
Capacity (Ram): 200 tons
Capacity (Pot): 70 tons
Movable Table Dimensions: 1000 × 1200 mm
Fixed Table Dimensions: 1000 × 1200 mm
Parallelism Tolerance: 120 microns/meter
Perpendicularity Tolerance: 60 microns/meter
Ram Stroke: 800 mm
Pot Stroke: 300 mm
Min. Daylight: 100 mm
Max. Daylight: 900 mm
Weld Stress Relief: Vibratory stress relief
Welding Application: WPQR and WPS certified by TÜRK-AK according to EN ISO 15614-1:2017
(Supervised by certified "welding coordination engineers" as per EN ISO 14731)
Max. Working Pressure: 250 Bar
Total Motor Power: 22 kW – IE3
Main Pump: 32 cm³ – REXROTH or PARKER
Movable Table Rapid Down Speed: 150 mm/s
Movable Table Drawing Speed: 12 mm/s
Movable Table Return Speed: 170 mm/s
Pot Table Forward Speed: 30 mm/s
Main Cylinder Bore: Ø320 mm – Ck45
Pot Cylinder Bore: Ø190 mm – Ck45
Auxiliary Acceleration Cylinders: 2 Units
Approx. Height of Press: 3800 mm
Approx. Width of Press: 2950 mm
Approx. Depth of Press: 2200 mm
Distance from Floor to Lower Table: 1350 mm
Pre-fill Valve: NG 125
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Position Scale: NOVATECHNIK or TURCK
PLC: DELTA
Touchscreen Panel: DELTA 7”
Switchgear: SIEMENS – SCHNEIDER
Approximate Weight: 13.5 tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
H-type 150/50 ton hydraulic deep drawing press
CRONOSSTECHCHSP 150/50
CRONOSSTECHCHSP 150/50
Call
Condition: new, Year of construction: 2025, pressing force: 150 t, table width: 1,000 mm, table length: 1,200 mm, retraction force: 50 t, stroke length: 600 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 150/50
H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guideways
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-action working principle to provide controlled material flow for sheet forming, deep drawing, and stamping applications. The 8-guideway H-frame design ensures maximum rigidity during pressing; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke.
The CHSP 150/50 model, featuring a 150-ton main ram and 50-ton blankholder (cushion) capacity, is designed for precise and repeatable deep drawing processes. The frame construction is stress-relieved by vibration to ensure long-term durability and reliable operation.
⚙️ Standard Equipment
- Steel construction, H-frame press body with 8 guideways
- Stress-relieved frame via vibration
- Bronze Zr14 slide bearings
- WPQR and WPS certified welding by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing compliant with CE standards
- PLC-controlled hydraulic system
- Touch panel screen (DELTA 7”)
- Adjustable ram and cushion stroke control
- Adjustable ram and cushion tonnage (pressure) control
- Automatic lubrication system
- Electronic filter contamination alert
- Hydraulic oil temperature and system status monitoring on screen
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER switchgear components
📐 Technical Specifications – CHSP 150/50
Type: Steel construction, H-frame press body with 8 guideways
Frame Material: St52 – ERDEMIR
Slide Bearings: Bronze Zr14
Capacity (Ram): 150 Ton
Capacity (Cushion): 50 Ton
Moving Table Dimensions: 1000 × 1200 mm
Fixed Table Dimensions: 1000 × 1200 mm
Parallelism Tolerance: 120 micron/m
Perpendicularity Tolerance: 60 micron/m
Stroke (Ram): 600 mm
Stroke (Cushion): 200 mm
Min. Daylight: 100 mm
Max. Daylight: 700 mm
Stress Relief: Vibratory stress relief
Hjdpsx N T U Hjfx Ah Usg
Welding Application: WPQR and WPS certification accredited by TÜRK-AK
EN ISO 15614-1/2017
(Welding applications supervised by "welding coordination engineers" certified according to EN ISO 14731)
Max. Working Pressure: 250 Bar
Total Motor Power: 18.5 kW – IE3
Main Pump: 32 cm³ – REXROTH or PARKER
Moving Table Rapid Down Speed: 150 mm/sec
Moving Table Drawing Speed: 12 mm/sec
Moving Table Return Speed: 170 mm/sec
Cushion Advance Speed: 30 mm/sec
Main Cylinder Inner Diameter: Ø280 mm – Ck45
Cushion Cylinder Inner Diameter: Ø160 mm – Ck45
Auxiliary Acceleration Cylinders: 2 units
Approx. Press Height: 3650 mm
Approx. Press Width: 2950 mm
Approx. Press Depth: 2000 mm
Lower Table Height from Floor: 1250 mm
Pre-fill Valve: NG 100
Hydraulic Power Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Position Transducer: NOVATECHNIK or TURCK
PLC System: DELTA
Touch Panel Screen: DELTA 7”
Switchgear: SIEMENS – SCHNEIDER
Approximate Weight: 11 Ton
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
H Type 100/40 Ton Hydraulic Deep Drawing Press
CRONOSSTECHCHSP 100/40
CRONOSSTECHCHSP 100/40
Call
Condition: new, Year of construction: 2025, pressing force: 100 t, table width: 1,000 mm, table length: 1,200 mm, retraction force: 40 t, stroke length: 600 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 100/40
H-Type Hydraulic Deep Drawing (Flanging) Press – 8-Guided Slides
General Description
The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and flanging operations. The 8-side guided H-frame structure guarantees maximum rigidity throughout the pressing cycle, maintaining stable parallelism and perpendicularity tolerances over the entire stroke.
The CHSP 100/40 model features a 100-ton main ram and a 40-ton cushion ram (blankholder), specifically designed for precision deep drawing and flanging operations. The frame construction is stress-relieved by vibration to ensure long service life and reliable operation.
⚙️ Standard Equipment
- Steel construction, H-frame body with 8 sliding guides
- Vibration stress-relieved frame structure
- Bronze Zr14 slide bearings
- WPQR and WPS certified welding procedures accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing in compliance with CE standards
- PLC-controlled hydraulic system
- 7” DELTA touchscreen panel
- Adjustable ram and cushion stroke control
- Adjustable ram and cushion tonnage (pressure) control
- Automatic lubrication system
- Electronically monitored filter contamination warning
- On-screen monitoring of hydraulic oil temperature and system status
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER switchgear components
📐 Technical Specifications – CHSP 100/40
- Type: Steel construction, H-frame body with 8 sliding guides
- Frame Material: St52 – ERDEMİR grade
- Slide Bearing: Bronze Zr14
- Capacity (Ram): 100 Tons
- Capacity (Cushion/Blankholder): 40 Tons
- Moving Table Size: 1000 × 1200 mm
- Fixed Table Size: 1000 × 1200 mm
- Parallelism Tolerance: 120 micron/meter
- Perpendicularity Tolerance: 60 micron/meter
- Stroke (Ram): 600 mm
- Stroke (Cushion): 200 mm
- Min. Daylight: 100 mm
- Max. Daylight: 700 mm
- Weld Stress Relief: Vibration stress-relieving
- Welding: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1:2017 (certified welding coordination engineers supervise per EN ISO 14731)
- Max. Operating Pressure: 250 Bar
- Total Motor Power: 11 kW – IE3
- Main Pump: 22 cm³ – REXROTH or PARKER
- Moving Table Rapid Down Speed: 150 mm/sec
- Moving Table Flanging Speed: 12 mm/sec
- Moving Table Return Speed: 170 mm/sec
- Cushion Table Forward Speed: 30 mm/sec
- Main Cylinder Bore: Ø230 mm – Ck45
- Cushion Cylinder Bore: Ø140 mm – Ck45
- Auxiliary Acceleration Cylinders: 2 units
- Approximate Height: 3400 mm
- Approximate Width: 2950 mm
- Approximate Depth: 2000 mm
- Distance from Floor to Lower Table: 1250 mm
- Pre-fill Valve: NG 100
- Hydraulic Unit: REXROTH or PARKER
- Cooling System: EMMEGI – CIESSE – PARKER
- Off-line Filtration: REXROTH or PARKER
- Linear Position Transducer: NOVATECHNIK or TURCK
- PLC Application: DELTA
- Touch Panel: DELTA 7”
- Switchgear: SIEMENS – SCHNEIDER
Hsdpfx Aex N T Uyjh Usg
- Approximate Weight: 9 Tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
H-type 2500 ton single acting hydraulic press
CRONOSSTECHCHP 2500
CRONOSSTECHCHP 2500
Call
Condition: new, Year of construction: 2025, pressing force: 2,500 t, table width: 1,800 mm, table length: 2,600 mm, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 2500
H-Type Hydraulic Press – 8-Guided Slides
General Description
The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and spinning applications that require extremely high tonnage. With its 8-guided H-frame construction, the press provides maximum rigidity during operation; parallelism and perpendicularity tolerances are reliably maintained throughout the full stroke length.
The CHP 2500 model, featuring large bolster dimensions, a multi-cylinder main pressing structure, and a high-capacity hydraulic system, is specifically designed for the automotive, heavy industry, defense, and high-tonnage tooling sectors. The frame structure is stress-relieved by vibration to ensure durability and reliable long-term operation.
⚙️ Standard Equipment
- Steel construction, 8-guided H-frame press body
- Stress-relieved frame via vibration method
- Bronze Zr14 slide bearings
- Welding applications certified by WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and production in accordance with CE standards
- PLC-controlled hydraulic system
- 7” touchscreen panel (DELTA)
- Adjustable ram stroke and tonnage control
- Automatic lubrication system
- Electronic filter contamination warning
- On-screen monitoring of hydraulic unit oil temperature and system status
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER electrical components
📐 Technical Specifications – CHP 2500
Type: Steel construction, 8-guided H-frame press body
Frame Material: St52 – ERDEMİR
Slide Bearing: Bronze Zr14
Capacity (Ram): 2500 tons
Hjdox N T S Ejpfx Ah Ujg
Moving Bolster Size: 1800 × 2600 mm
Fixed Bolster Size: 1800 × 2600 mm
Parallelism Tolerance: 120 micron/m
Perpendicularity Tolerance: 60 micron/m
Stroke (Ram): 1000 mm
Min. Daylight: 200 mm
Max. Daylight: 1200 mm
Weld Stress Relief: Vibration method
Welding Certification: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1/2017)
Max. Operating Pressure: 250 bar
Total Motor Power: 180 kW – IE3
Main Pump: 140 cm³ – REXROTH or PARKER
Moving Bolster Fast Descent Speed: 150 mm/s
Moving Bolster Drawing Speed: 12 mm/s
Moving Bolster Return Speed: 170 mm/s
Main Cylinder Inner Diameter: Ø565 mm – Ck45 (4 units)
Auxiliary Acceleration Cylinders: 2 units
Approx. Press Height: 6,500 mm
Approx. Press Width: 3,950 mm
Approx. Press Depth: 2,600 mm
Lower Table Height from Floor: 1,500 mm
Primary Filling Valve: NG 200
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Displacement Transducer: NOVATECHNIK or TURCK
PLC System: DELTA
Touchscreen Panel: DELTA 7”
Electrical Components: SIEMENS – SCHNEIDER
Approximate Weight: 120 tons
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
Listing
Turkey
2,831 km
H-TYPE 2000 TON SINGLE-ACTING HYDRAULIC PRESS
CRONOSSTECHCHP 2000
CRONOSSTECHCHP 2000
Call
Condition: new, Year of construction: 2025, pressing force: 2,000 t, table width: 1,500 mm, table length: 2,500 mm, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 2000
H-Type Hydraulic Press – 8-Guided Slide
General Description
The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy forming, deep drawing, spinning, and die applications requiring very high tonnage. The rigid H-frame structure with 8 guiding slides ensures maximum rigidity during pressing operations and maintains parallelism and perpendicularity tolerances throughout the full stroke.
The CHP 2000 model, featuring large table dimensions, a high-capacity hydraulic system, and a powerful motor, offers a reliable and durable solution for the automotive, defense, heavy industry sectors, and high-tonnage production lines. The frame is stress-relieved via vibration to ensure stable operation.
⚙️ Standard Equipment
- Steel construction, H-frame body with 8 guided slides
- Vibration stress-relieved body structure
- Bronze Zr14 slide bearings
- TÜRK-AK accredited WPQR and WPS certified welding procedures (EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing in compliance with CE standards
- PLC-controlled hydraulic system
- Touch screen panel (DELTA 7”)
- Adjustable ram stroke and tonnage control
- Automatic lubrication system
- Electronic filter contamination warning
- On-screen monitoring of hydraulic unit oil temperature and system status
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER switchgear
📐 Technical Specifications – CHP 2000
- Type: Steel construction, H-frame body with 8 guided slides
- Frame Material: St52 – ERDEMİR
- Slide Bearings: Bronze Zr14
Hsdpfox N T Srsx Ah Uog
- Capacity (Ram): 2000 Tons
- Moving Table Size: 1500 × 2500 mm
- Fixed Table Size: 1500 × 2500 mm
- Parallelism Tolerance: 120 micron/meter
- Perpendicularity Tolerance: 60 micron/meter
- Stroke (Ram): 1000 mm
- Min. Daylight: 200 mm
- Max. Daylight: 1200 mm
- Weld Stress-Relief: Vibration stress-relieved
- Welding Application: WPQR and WPS certified by TÜRK-AK, according to EN ISO 15614-1/2017
- Max. Working Pressure: 250 Bar
- Total Motor Power: 180 kW – IE3
- Main Pump: 140 cm³ – REXROTH or PARKER
- Moving Table Fast Down Speed: 150 mm/sec
- Moving Table Drawing Speed: 12 mm/sec
- Moving Table Return Speed: 170 mm/sec
- Main Cylinder Inner Diameter: Ø720 mm – Ck45 (2 units)
- Auxiliary Acceleration Cylinders: 2 units
- Approx. Height of Press: 6300 mm
- Approx. Width of Press: 3850 mm
- Approx. Depth of Press: 2500 mm
- Lower Table Height from Floor: 1500 mm
- Main Fill Valve: NG 200
- Hydraulic Power Unit: REXROTH or PARKER
- Cooling System: EMMEGI – CIESSE – PARKER
- Off-line Filtration: REXROTH or PARKER
- Linear Distance Transducer: NOVATECHNIK or TURCK
- PLC System: DELTA
- Touch Panel Display: DELTA 7”
- Switchgear: SIEMENS – SCHNEIDER
- Approximate Weight: 95 Tons
Production Note
This machine is manufactured in Turkey by CRONOSSTECH.
Listing
Turkey
2,831 km
H-Type 1500 Ton Single-Acting Hydraulic Press
CRONOSSTECHCHP 1500
CRONOSSTECHCHP 1500
Call
Condition: new, Year of construction: 2025, pressing force: 1,500 t, table width: 1,500 mm, table length: 2,400 mm, stroke length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8 Guides
General Description
The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are engineered for deep drawing, forming, and heavy-duty shaping applications that require high tonnage. The 8-guide H-frame structure delivers maximum rigidity and stability during pressing operations, ensuring parallelism and perpendicularity tolerances are maintained.
The CHP 1500 model, equipped with a large bolster, robust hydraulic system, and high stroke capacity, provides a reliable solution for sectors such as automotive, defense, heavy metal forming, and industrial production lines. The frame is stress-relieved by vibration, guaranteeing long-lasting and stable operation.
⚙️ Standard Equipment
Hsdpfx Ahjx N T R Ue Ujg
• Steel construction, 8-guide H-frame press structure
• Vibration stress-relieved main frame
• Bronze Zr14 slide bearings
• WPQR and WPS welding applications approved by TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731)
• Design and manufacturing in compliance with CE standards
• PLC-controlled hydraulic system
• Touch screen panel (DELTA 7”)
• Adjustable ram stroke and tonnage control
• Automatic lubrication system
• Electronic filter contamination warning
• On-screen monitoring of hydraulic unit oil temperature and system status
• Cooling system
• Off-line filtration
• Operator safety protection systems
• SIEMENS/SCHNEIDER electrical components
📐 Technical Specifications – CHP 1500
Type: Steel construction, 8-guide H-frame press
Frame Material: St52 – ERDEMIR
Slide Bearings: Bronze Zr14
Capacity (Ram): 1500 Ton
Moving Bolster Size: 1500 × 2400 mm
Fixed Bolster Size: 1500 × 2400 mm
Parallelism Tolerance: 120 micron/meter
Perpendicularity Tolerance: 60 micron/meter
Stroke (Ram): 1000 mm
Min. Daylight: 200 mm
Max. Daylight: 1200 mm
Stress Relief: Vibration stress-relief
Welding: WPQR and WPS certified by TURK-AK, EN ISO 15614-1/2017
Max. Working Pressure: 250 Bar
Total Motor Power: 90 kW – IE3
Main Pump: 101 cm³ – REXROTH or PARKER
Moving Table Fast Descent Speed: 150 mm/s
Moving Table Drawing Speed: 12 mm/s
Moving Table Return Speed: 170 mm/s
Main Cylinder Inner Diameter: Ø620 mm – Ck45 (2 pcs)
Auxiliary Acceleration Cylinders: 2 pcs
Approximate Height: 6250 mm
Approximate Width: 3750 mm
Approximate Depth: 2500 mm
Lower Table Height from Floor: 1500 mm
Pre-fill Valve: NG 200
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Position Transducer: NOVATECHNIK or TURCK
PLC Application: DELTA
Touch Panel: DELTA 7”
Switchgear Components: SIEMENS – SCHNEIDER
Approximate Weight: 70 Ton
Production Note
This machine is manufactured by CRONOSSTECH in Turkey.
























