Gm Handel Service

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Pjdpfx Ahex N T Nqj Usha Full sound enclosure No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. Possible to supply with Weinig mechanisation if needed (Year 2012)

Condition: good (used), Leadermac Speedmac 923 Maximum width 230mm Maximum thickness 160mm Phsdpfx Aex N T Ndeh Uja 9x spindles 6,000 RPM 4x side heads !!! Bottom 11kW outboard bearing Right 11kW Left 11kW Right 11kW Left 11kW Top 11kW outboard bearing Bottom 11 kW outboard bearing Top 22kW outboard bearing Bottom 22 kW outboard bearing Possible to add jointers as needed. Large quantity of Hydro tooling included!!! 11kW feed motor. 6-70m/min (possible to increase if needed). Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: reconditioned (used), Leadermac Thundermac 923T Spindles: 9 x 50mm x 6000 rpm Bottom (22 kW) - Right (15 kW) - Left (15 kW) - Right (15 kW) - Left (15 kW) - Top (22 kW) - Psdpfjx N T I Tex Ah Ujha Bottom (22 kW), Top (22 kW) - Bottom (22 kW). Working width: 250 mm, height: 160 mm. Max feed speed 100m/min (Possible to increase to 150m/min) Straight jointers. Profile jointers. Connection: 380 V / / 50 Hz 400 amps. Full Documentation included.

Condition: reconditioned (used), Year of construction: 2013, Leadermac Speedmac 631 Working width: 310 mm, height: 150 mm. Psdpfjx N T I Hjx Ah Ueha Spindles: 6 x 50mm (4x spindles with inverter speed control Bottom (22 kW) - 6000 rpm outboard bearing Right (15 kW) - (4000 to 9000 rpm) straight jointer Left (15 kW) - (4000 to 9000 rpm) straight jointer Top (22 kW) - 6000 rpm, outboard bearing, Top (22 kW) - (4000 to 9000 rpm), outboard bearing, straight jointer Bottom (22 kW)- (4000 to 9000 rpm), outboard bearing, straight jointer Feed speed 60m/min (Possible to increase). Top feed rollers 200mm (first 2) and 140mm others Connection: 380 V / / 50 Hz Full Documentation included.

Condition: good (used), Weinig Hydromat H23 8 spindle 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing Podox N T Iyspfx Ah Ujha 7.5kW feed motor. Automatic lubrication system. Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: excellent (used), Weinig Hydromat 23C with 6 Spindles. Max width 245mm Max Thickness 160mm Pjdox N T Imspfx Ah Uoha Separate electrical panel. Separate remote control panel Automatic lubrication system for bedplates Full heavy duty sound enclosure. 15kW feed motor 100m/min No 1.  7.5kw - Bottom 6000rpm straight jointer prepared No 2. 11kw - Right 6000rpm straight and profile jointer prepared No 3. 15kw - Left 6000rpm straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 5 . 30kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 6 . 15kw - Bottom 6000rpm + Outboard bearing + straight and profile jointer prepared 50mm spindles Beam 0.55kW Full documentation included. Heavy duty sound enclosure. Possible to supply with hydro tooling if needed. Possible to supply with full mechanisation if needed.

Condition: good (used), WEINIG HYDROMAT H-23 10 SPINDLE MACHINE WITH TILT BEAM SHORT INFEED TABLE 1: BOTTOM 7,5KW 2: RIGHT 7,5 KW 3: LEFT 7,5 KW 4: RIGHT 7.5 KW 30° TILTABLE 5: LEFT 7,5KW 6: TOP 11 KW 7: BOTTOM 7,5 KW 8: TOP 7,5 KW 9: BOTTOM 7,5 KW 10: UNIVERSAL 7,5 KW 360° TILTABLE Pedpfx Ahex N Ixge Ujha 60 M/MIN+ ELECTRIC. FEED 14 x DRIVEN TOP FEED ROLLERS 7 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS PNEUM. POWERED HOLD DOWN ON 7+9 DIMENSION: APPR 5400 X 2000 X 1800 MM WEIGHT: APPR. 7500 KGS DUSTHOODS: 10 x 140 MM DIAMETER

Condition: used, Year of construction: 2015, functionality: fully functional, Technical Description SCM Topset XL Planer Moulder – 9 Spindles 1. General Description The SCM Topset XL is a four-sided planer and moulder for the woodworking industry, manufactured by SCM Group (Italy). It is designed for efficient machining of solid wood, profiled, and framing workpieces (such as windows, doors, and furniture components) in continuous feed production. Planer configuration: b-l-r-l-r-t-b-t-b (Bottom-Left-Right-Left-Right-Top-Bottom-Top-Bottom) Moulder with 9 spindles and SCM Control 100 PC for all spindle adjustments Maximum working width: 260 mm Minimum working width: 15 mm Maximum working height: 200 mm Minimum working height: 6 mm Minimum length: 640 mm Feed speed: 6 – 36 m/min, variable Spindle speed: 6,000 / 8,300 rpm Spindle diameter: 40 mm Usable length of vertical spindles: 140 mm Usable length of horizontal spindles: 260 mm Axial adjustment of vertical spindles relative to the table: 0 - 80 mm Axial adjustment of horizontal spindles relative to right guide: 0 - 45 mm Min. and max. diameter of profile tooling: 100 – 220 mm Min. and max. diameter of cutters on the planing spindle: 120 – 140 mm Profile capacity of the second lower horizontal spindle with 200 mm tool: 15 mm Feed motor power: 5.5 kW Feed roller diameter: 140 mm Infeed table length: 2,500 mm Quick adjustment of infeed table and guide: 10 mm Extraction requirement: 16,200 m³/h Compressed air supply: 6 – 10 bar Weight: approx. 6,000 kg Dimensions (L x W x H): 7,300 x 1,800 x 1,800 mm Spindle arrangement: b-l-r-l-r-t-b-t-b SET-UP Quick Adjustment System Work tables with fine adjustment of all units via Control 100 PC Phsdpfsx Nqy Tox Ah Uoa Long 80 mm adjustment range for vertical spindles, enabling use of large-diameter tools Fully enclosed safety cabin with pneumatic opening Feed system with full cardan shaft drive Infinitely variable feed speed Motorized height adjustment of feed system and spindles with independent control Split pressure shoes after top horizontal spindles Fine adjustment of outfeed table Pneumatic spindle locking in working position Automatically adjustable left vertical spindle Including ZIWO CL 15 automatic feeding system 2. Basic Concept and Design The Topset XL is a heavy-duty through-feed planer moulder featuring: - Horizontal and vertical spindles allowing simultaneous machining of all four sides of a workpiece - Belt/cardan feed systems for consistent material transport - SET-UP quick-change system for rapid tooling setup - Electronic control and regulation for feed speed and spindle positioning The machine features a heavy, torsion-resistant base frame constructed from welded steel and precision-machined on CNC centers to ensure high accuracy and durability.

Condition: good (used), Year of construction: 1994, functionality: fully functional, 1 used Weinig four-sided planer UNIMAT 23, 5-head with stacking unit for board lengths up to 5.50 m Planing width: 230 mm Planing height: 150 mm Spindle diameter: 50 mm Spindle arrangement: bottom, right, left, top, bottom (with jointer) Total connected load: 37 kW Outfeed roller conveyor: 6000 mm long, 800 mm wide with transfer to left and right Pjdpfxex Ngiqs Ah Usha Left: transfer to stacking machine Right: board turner Stacking unit Lux for board lengths up to 5.50 m, width up to 1.30 m

Condition: excellent (used), Year of construction: 1996, working width: 230 mm, planing height: 120 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 120 mm, power of feed motor: 4,000 W, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 with 5 spindles. Working width: 230 mm, Working height: 120 mm, Spindle diameter: 40 mm, Pedpjx Ndb Refx Ah Usha Feed: 4 kW / 6 – 36 m/min, Spindle configuration: 1-Bottom 2-Right 3-Left 4-Top 5-Bottom Short-piece package Three powered rollers in the table. Note that the digital control system is defective – the machine operates only via manual adjustment. This means measurements are not displayed accurately and test pieces may be necessary. However, the defect is repairable.

Condition: excellent (used), SCM SI12B Circular Saw Cutting width on the right: 700 mm Maximum cutting height: 100 mm with 300 mm blade Manual adjustment of saw blade tilt angle up to 45° Phedpfox I E Nmex Ah Uja Manual lifting and lowering of the saw blade Main motor power: 2.2 kW

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 870-5805, working width: 170 mm, planing height: 120 mm, planing width: 170 mm, spindle speed (max.): 6,000 rpm, workpiece height (max.): 120 mm, workpiece width (max.): 170 mm, number of spindles: 7, feed roller diameter: 140 mm, Width of the work piece to be processed 20-170 mm Thickness of the work piece to be processed 10-120 mm Length of the work piece to be processed L min 750 mm Permissible cutting depth: lower horizontal working unit 0-10 mm, right vertical working unit 0-10 mm Feed speed 6-36 m/min Diameter of feed rollers 140 mm, width 50, 30, 20, 15 mm Podpfx Aox It A Uoh Ueha Tool rotation speed 6000 rpm Number of working units: horizontal 3+1 pieces, vertical 3 pieces

Condition: used, Four-sided planer PANHANS 180/4, in good condition Phjdpfjx H Ug Eex Ah Uea Price changes reserved; errors, printing, and typographical mistakes excepted.

Condition: excellent (used), functionality: fully functional, Working width: 230 mm Working height: 160 mm Number of spindles: 5 Spindle configuration: 1. Bottom 15 kW 2. Right 11 kW 3. Left 11 kW 4. Top 15 kW 5. Bottom 7.5 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm 3 feed rollers in the work table Feed speed adjustable via inverter up to 60 m/min Feed driven by cardan shaft Pneumatic pressure rollers Technical documentation Podpfox Hzv Tjx Ah Usha Machine dimensions: 300x180x170 cm (H) Weight: 3500 kg

Condition: excellent (used), Infeed conveyor for four-sided planer Sacot TECHNICAL SPECIFICATIONS: Max material length: 1700 mm Max material width: 230 mm Material height: 70 mm 5x material feed chains Phodpfx Aex Hx H Noh Uja Distance between outer material drivers: 1080 mm Machine dimensions: 4500 × 2400 × 1800 mm (H) Construction: heavy-duty, industrial, steel Control: electric + pneumatic This feeder is ideally suited for: sawmills, wood processing plants, production lines, and manufacturing of short and medium-length components. EXPANDABILITY OPTIONS (optional): Complete technological line including: Weinig Hydromat 23c four-sided planer, 60m/min SACOT panel saw SACOT stacker

Condition: excellent (used), Year of construction: 1995, Very well-preserved planer moulder with timed lifting spindles on the right and top, and glazing bead saw. Spindle arrangement: Bottom: 4 kW Right: timed lifting spindle Left: 7.5 kW (together with right spindle) Top: 5.5 kW timed lifting spindle Bottom: 5.5 kW Glazing bead saw: 3 kW Equipped with Centrofix planer heads and spare planer heads. Phsdpfx Aox Htc Sjh Uea

Condition: good (used), functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 5,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 9, power: 95 kW (129.16 HP), input frequency: 50 Hz, Equipment: cabin, Four-sided planer Weinig Unimat 23, lamella machine 9 spindles, grooved bed Working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (5.5 kW) 4-Right (5.5 kW) 5-Top (11 kW) Phedpfx Ahex Hkp No Uoa 6-Bottom (5.5 kW) 7-Top (7.5 kW) 8-Bottom (37 kW) 9-Uni (11 kW) 5 driven rollers in the table

Condition: excellent (used), Sacot CA.SCA.PILA 1400 Board Stacker A professional stacker designed for the automatic arrangement of boards into uniform, stable, and repeatable bundles. An ideal solution for sawmills and timber processing plants, significantly increasing efficiency and work comfort. TECHNICAL SPECIFICATIONS Stackable material length: 770–1400 mm Stacking width: 1200 mm Stacking height: 1250 mm Machine dimensions: 4600 × 3700 × 2600 mm (H) Feeding / unloading: roller outfeed table Construction: heavy-duty industrial steel Control: electric + pneumatic The stacker is perfectly suited for: sawmills, timber processing plants, production lines, and the manufacturing of short and medium-length components. EXPANSION OPTIONS (optional): a complete technological line including: Phsdpsx Hd Tbofx Ah Uoa Weinig Hydromat 23c 60m/min planer SACOT crosscut saw SACOT stacker See full description Suggest a price Lease available

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, Connected load 480V 42kW 108A, extraction connection 5x120 + 2x150 mm, 1x jointer unit, 2x vertical spindle units, 1x thicknessing unit, 1x universal unit top, 1x universal unit bottom, spindle diameter 40 mm, lubricant pump, pneumatically controlled pressure rollers, connection 6 bar, electric bridge adjustment, central lubrication, stepless feed via frequency inverter, total length 4200 mm, depth 2000 mm, height 1700 mm – as returned by customer Pjdpfxjx E T Dmj Ah Ujha

Condition: excellent (used), functionality: fully functional, working width: 410 mm, planing width: 410 mm, Planer, jointer SCM F410 Specification: • condition - used, after inspection • manufacturer - SCM • model - F410 • working width - 410 mm • table length - 2610 mm • fence adjustable for angle • motor power - 4.0 kW • spindle speed - 5000 rpm • chip thickness indicator • max cutting depth - 8 mm • noise dampening combs at the shaft • motor brake • four-knife shaft, 120 mm diameter, for traditional knives • star-delta starter • dust extraction outlet - 150 mm dia • weight - approx. 650 kg Pedpfsx E Srvex Ah Ujha • CE marked • overall dimensions: 261 x 90 x 110 cm (L x W x H) Additional information: • very good technical condition • the presented photos show the actual condition of the item for sale • possibility to start and test the machine on site.

Condition: excellent (used), SCM Sintex four-sided planer. Pedpfx Ahjx E R Hxo Usha

Condition: excellent (used), Weinig four-side planer Phjdjx E Rzpspfx Ah Uoa

Condition: excellent (used), Weinig Four-Side Planer - Maximum planing width: 23 cm - Maximum planing height: 13 cm - Spindle configuration: 5.5 kW bottom spindle, 7.5 kW right and left spindle, and 7.5 kW top spindle - Vertical spindles with vertical and horizontal adjustment - Electrically height-adjustable feed rollers - Electrically height-adjustable top spindle - Steplessly adjustable feed speed - Weinig head alignment device The machine is in very good condition and runs vibration-free. Pjdpfx Ahsx E Rxue Ueha

Condition: excellent (used), Weinig Four-Sided Planer Pedpfxjx E Rtxs Ah Uoha - Maximum planing width: 23 cm - Maximum planing height: 13 cm - Spindle configuration: bottom 5.5 kW, right and left spindles driven by a 5.5 kW motor, top spindles powered by 5.5 kW - Electrically height-adjustable feed rollers - Infinitely variable feed speed - 4 steel planing knives, each with 4 blades The machine is in very good condition and runs smoothly without vibrations.

Condition: excellent (used), Leadermac LMC 525 Four-Sided Wet Planer - Maximum planing width: 25 cm - Maximum planing height: 20 cm - Bottom spindle: 5.5 kW - Right spindle: 5.5 kW - Left spindle: 5.5 kW - Top spindle: 7.5 kW - Universal spindle: 7.5 kW - 3 feed rollers in the table + lubrication pump - Hardened chrome tables - Stepless feed speed adjustment Phjdpfx Aex E Rh Aoh Uea In excellent condition. Original. Nothing repainted.