Sia "Valtor"

Condition: used, Year of construction: 1995, operating hours: 64,912 h, functionality: fully functional, machine/vehicle number: 504114, spindle speed (max.): 2,800 rpm, spindle speed (min.): 10 rpm, spindle motor power: 50,000 W, total height: 2,500 mm, total length: 4,900 mm, total width: 2,285 mm, workpiece weight (max.): 500 kg, overall weight: 10,200 kg, Equipment: documentation/manual,

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 07/2018, total length: 5,060 mm, total width: 2,520 mm, wheelbase: 4,200 mm, Year of construction: 2018 Rear axle 1: Max. axle load: 9000 kg Pjdpj Agtlysfx Abusrc Rear axle 2: Max. axle load: 9000 kg Empty weight: 2.640 kg Carrying capacity: 15.360 kg GVW: 18.000 kg Registration number: 37-WS-TR

Condition: used, Year of construction: 2017,

Condition: new, Year of construction: 2026, working width: 6,280 mm, color: green, overall weight: 3,300 kg, first registration: 10/2026, rear tire size: 8 x 21×9 14 PLY wide pneumatic tyre with steel rim, total width: 6,470 mm, Equipment: front power take-off, hydraulic folding, lighting,

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT39502038918, empty load weight: 5,438 kg, maximum load weight: 33,562 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,160 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: black, Year of construction: 2026, Attention: archive images! #Chassis tipper semi-trailer - Fine-grain steel welded construction, standard lightweight design, fifth-wheel plate with replaceable 2" kingpin - Patented "Curved" front end - 24 t 2-speed landing gear, one-side operation - Folding underrun protection with spring assistance for easier operation - Anti-spray mudflaps on last axle only - 2 towing hooks at rear #Axles + suspension - SAF disc brake axles with 430 mm disc diameter - Laser-aligned axles/running gear: reduced tyre wear and fuel consumption - Axles in off-road version - Air suspension - 1st axle automatic lift axle, additionally electrically operable from the truck, incl. forced lowering and traction help - Hot-dip galvanised lift axle mechanism – 10-year warranty against rust-through #Braking system - Dual-line compressed air braking system - Colour-coded line routing for easy servicing - Spring brake parking brake - 2 mismatch-proof coupling heads at front - 24 V EBS, electronic braking system with EBS socket at front - With raise/lower valve - Vehicle roll stability system - Automatic suspension lowering during tipping, with shut-off valve - Axle load detection via EBS CAN bus signal, display in driver's cab #Wheels and tyres - 385/65 R22.5", make at manufacturer's discretion - Polished aluminium rims, make at manufacturer's discretion - Wheel nut protection caps - TPMS tyre pressure monitoring system acc. to ECE R 141, display in towing vehicle via EBS #Electrics - 24 V, 4 x 3-chamber lamps + 1 round reversing light + 1 round rear fog light, full LED with resistor, LED number plate lighting - Yellow LED side lighting coupled with the indicators - Premium LED side marker lights - 2 white LED front position lights - 2 white/red LED outline marker lights at rear - 2 x 7-pin and 1 x 15-pin mismatch-proof sockets at front - LED work lights on both sides of the "Curved" - 2 additional LED work lights recessed into the rear #Hydraulics - Hydraulic cylinder 170–250 bar, for low- and high-pressure operation, all stages hard chrome-plated, with high-pressure swivel coupling screw sleeve (fixed part), DN 48 mm Podpfo Agtfpsx Abuorc - Hydraulic operation via truck PTO - Hydraulic connection with hose and high-pressure swivel coupling screw plug DN 48 mm with knurled nut #Tipping body - Round steel body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mount. - Internal access ladder on front wall - Greenline – conical and aerodynamic body shape - Shovel and broom holder on outside of front wall - Membrane rear wall - Rear wall as pendulum flap with double-joint hinges, resting on the outside, with double hook locking. 2 clamping screws with toggle fasteners at bottom sides - Side walls 4 mm throughout, floor 4/5 mm, wear- and weight-optimised design - "Fliegl S.T.E.P." – swivelling front standing platform with folding ladder for side access on the left in direction of travel - "Flip Top" sliding cover, automatic rear closure as folding bow. Cover mechanism projects at the front above the front wall. Electric drive, 7-pin socket, incl. loose socket for towing vehicle, operation on the trailer and via radio remote control. Attention: archive images!

Condition: used, functionality: fully functional, Year of construction: 2010, machine/vehicle number: 2473068, power: 36.4 kW (49.49 HP), load capacity: 230 kg, lifting height: 18,460 mm, platform length: 1,830 mm, platform width: 910 mm, overall weight: 10,830 kg, transport length: 8,820 mm, transport width: 2,490 mm, transport height: 2,570 mm, fuel type: diesel, color: orange,

Condition: used, Year of construction: 2000,

Condition: used, mileage: 589,038 km, power: 324 kW (440.52 HP), first registration: 07/2010, fuel type: diesel, tire size: 13 R22.5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, power mirror,

Condition: good (used), Year of construction: 1980, machine/vehicle number: 2226-3,

Condition: used, fuel type: diesel, gearing type: automatic, first registration: 05/2023, color: black, machine/vehicle number: 6FPPXXMJ2PNA83734,

Condition: used, functionality: fully functional, Year of construction: 2006, machine/vehicle number: 2451498, load capacity: 360 kg, mast type: telescopic, lifting height: 12,190 mm, platform length: 2,920 mm, platform width: 1,650 mm, overall weight: 5,300 kg, transport length: 3,070 mm, transport width: 1,750 mm, fuel type: electric, tire size: 240/55-17.5, ground clearance: 20 mm, color: white,

Condition: used, mileage: 703,285 km, power: 340 kW (462.27 HP), first registration: 04/2018, fuel type: diesel, number of seats: 67, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Equipment: ABS, air conditioning, cruise control, trailer coupling,

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, STANGO Paper drill Drill heads 4 Min / Max 40 - 250 mm Drill diameter 2 - 10 mm Drill dept 60 mm Price under request Pedpfs Agr N Tex Abujrc Available immediately More pictures and video is available.

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 6,150 mm, color: green, overall weight: 3,850 kg, first registration: 11/2025, rear tire size: 8 x 10.0 / 80 x 12 – AW – 909 TL 10 PLY pneumatic tyre with steel rim, total length: 6,510 mm, Equipment: compressed air brake, front power take-off, hydraulic folding, lighting,

Condition: used, functionality: fully functional, Year of construction: 2006, machine/vehicle number: 2451488, load capacity: 360 kg, mast type: telescopic, lifting height: 12,190 mm, platform length: 2,920 mm, platform width: 1,650 mm, overall weight: 5,300 kg, transport length: 3,070 mm, transport width: 1,750 mm, fuel type: electric, tire size: 240/55-17.5, ground clearance: 20 mm, color: blue,

Condition: excellent (used), Year of construction: 2017, operating hours: 37,280 h, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, torque: 2 Nm, controller manufacturer: Fanuc, controller model: 31i- B5, spindle speed (max.): 54,000 rpm, operating hours of spindle: 11,360 h, spindle nose: HSK-E 32, number of slots in tool magazine: 40, tool length: 200 mm, tool weight: 1,200 g, 5-Axis Mill-Turn Center We offer you: Manufacturer: Chiron Model: FZ08 MT Precision+ high speed plus Year of manufacture: 2017 Control system: Fanuc 31i-B5 Technical Specifications: Travel ranges: X-axis: 210 mm Y-axis: 200 mm Z-axis: 360 mm B-axis: -10° to +100° C-axis: 360° Main spindle: Speed range – main spindle: max. 54,000 rpm Drive power – main spindle (100/25%): 3.5 / 5.2 kW Torque: max. 2 Nm Turning spindle: Max. bar capacity: 32 mm Speed range: 15 – 8,000 rpm Drive power (100/15%): 9 / 12 kW Torque: max. 14.3 Nm NC 2-axis swivel unit: Swivel angle: -60° to +180° NC rotary table diameter: 170 mm Tool changer: Tool holder: HSK-E 32 Prsdpfx Abe Agr Ntoujc Number of tool positions: 40 pos. Max. tool diameter: 45 / 100 mm Max. tool length: 200 mm Max. tool weight: 1.2 kg Tool change time: approx. 0.8 sec Chip-to-chip time: approx. 2.5 sec Feed rates: Rapid traverse (x/y/z): 75 m/min Operating hours: approx. 37.280 h Spindle hours: approx. 11.360 h Please refer to the attached PDF for technical specifications and accessories. Accessories, tools shown, and clamping devices are included in the scope of delivery only if noted in the additional information. We reserve the right to make changes and correct errors in the technical data and specifications, and to sell items prior to order confirmation!

Condition: excellent (used), Year of construction: 2014, operating hours: 56,100 h, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, controller manufacturer: Siemens, controller model: 840 D sl, table width: 500 mm, table length: 400 mm, table load: 500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,310 h, spindle nose: HSK-A 63, number of slots in tool magazine: 42, Equipment: chip conveyor, Horizontal Machining Center We offer you: Prsdpfxe Agr Nhj Abusc Manufacturer: Starrag Heckert Model: HEC 400 D Year of manufacture: 2014 Control system: Siemens 840D sl Operate Technical Specifications: Travel ranges: X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 680 mm Main spindle: Speed range: 8,000 rpm Tool holder: HSK-A 63 NC swivel rotary table: Number of tables: 2 Table clamping surface: 400 x 500 mm Max. table load: 500 kg Tool changer: Number of tool positions: 42 Operating hours: approx. 56,100 h Spindle hours: approx. 5,310 h Technical Features & Accessories: - IKZ - Paper belt filter - Chip conveyor - 2 pallets There are 3 identical machines available. Accessories, tools shown, and clamping devices are included in the scope of delivery only if noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2017, operating hours: 32,000 h, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 12,000 h, spindle nose: SK 40, number of slots in tool magazine: 60, Equipment: chip conveyor, Universal Machining Center Manufacturer: DMG MORI Model: DMU 50 3rd with Lang RoboTrex52 Year of manufacture: 2017 Control system: Celos with Siemens 840D sl Operate Pjdpfs Agr I Sox Abuerc Technical Data Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed ​​range - main spindle: 20 – 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 60 Feed rates: Rapid traverse (X/Y/Z): 42 m/min Operating hours: approx. 32,000 h Spindle hours: approx. 12,000 h Technical features & accessories: - Active spindle cooling - Direct measuring system in all axes - Scraper-type chip conveyor - Internal coolant supply (ICS) 40 bar, includes: - Paper belt filter - 600 l tank - Cabin roof - Rotary union through spindle center - Air blast through spindle center - Wash-down gun - Mechanical oil and emulsion mist separator - Infrared touch probe, Heidenhain TS 649 (if present) - 3D quickSET preparation - Operating mode 4 - ATC – Application Tuning Cycle - Tool breakage detection TRS2 (if present) - Tracy Cylindrical surface interpolation - Lang RoboTrex 52 automation system Accessories, tools, and workholding devices shown are included in the scope of delivery only if this is stated in the additional information. Unless otherwise agreed, sales between B&B customers are always made without warranty.

Condition: excellent (used), Year of construction: 2023, operating hours: 12,320 h, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 4,020 h, spindle nose: SK 40, number of slots in tool magazine: 120, Universal Machining Center + Robot Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: 2023 / 2025 Control system: Celos with Siemens 840D sl Operate Technical Data Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed ​​range - main spindle: 20 – 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: Dia. 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 pos. Feed rates: Rapid traverse (X/Y/Z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4,020 h Technical features & accessories: - Active spindle cooling - Direct measuring system in all axes - Scraper-type chip conveyor with self-cleaning screen - Internal coolant supply (IKZ) 40 bar, comprising: - Paper belt filter - 600 l tank - Cabin roof - Rotary union in spindle - Duplex filter Podpj Agr I Defx Abuorc - Air blast through spindle center - Rotating viewing window - Chip flushing gun - Oil and emulsion mist separator - Infrared touch probe, make Heidenhain TS 460 (if present) - Tool measurement - Heidenhain TT160 (if applicable) - 3D quickSET preparation - PH Cell automation interface, comprising: - Interface - 4-channel rotary union - Automatic loading door - Operating mode 4 - Tracy peripheral surface interpolation - PH 150 pallet loading/unloading system, comprising: - 10-station pallet magazine - External electronic handwheel (if applicable) Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Unless otherwise agreed, sales between businesses (B2B) are always made without warranty.

Year of construction: 2026, operating hours: 1,130 h, condition: like new (used), turning diameter: 400 mm, bar passage: 65 mm, spindle nose: HSK-T 63, turning length: 1,100 mm, CNC Turning and Milling Center Manufacturer: DMG MORI Type: CLX 450 TC with Robo2Go Year of manufacture: 2026 Control system: Celos X with Siemens Sinumerik One Technical data: Max. turning diameter: 400 mm Turning length: 1100 mm Bar capacity: max. 65 mm Travel ranges: X-axis travel: 276 mm Z1-axis travel: 755 mm Z3-axis travel: 775 mm Y-axis travel: +/- 100 mm B-axis travel: +/- 120° Main spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Counter-spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Milling spindle: Speed: 0 – 12,000 rpm Drive power: 8.8/10.5 kW Tool holder: HSK-T 63 Tool changer: 60 positions Max. torque: 73/90 Nm Hollow clamping device: Ø 67 mm Operating hours: approx. 1,130 h Spindle hours: approx. 280 h Technical features & accessories: - Absolute, direct position measuring systems in X- and Y-axes - Dual changeover filter - Counter-spindle ISM 65, A2-8, C-axis and hydr. Spindle brake - Hinged-belt chip conveyor, incl. coolant tank - External chuck flushing system for main and counter-spindle - Coolant supply through the counter-spindle - Coolant spray gun - Safety window cleaning system - Electronic handwheel (if applicable) - Alternating spindle speed - 4-color signal light - Automatic electric work area door - Robo2Go electrical interface - Workpiece probe, Renishaw RMP40 (if applicable) - Tool measuring device, Renishaw RP1 (if applicable) - Drill breakage detection function for Renishaw RP1 - Position measuring system for Z1-axis - Differential pressure clamping 2.0 on main and counter-spindle - Tailstock function for counter-spindle, incl. footswitch - Coolant system 8 / 40 bar, consisting of: - 600 l coolant tank - Variable pump pressure 8 – 40 bar - Belt filter system - Lift pump with level monitoring - Mechanical oil mist separator - Protection Package - Technology cycle with conversational programming - Technology cycle for workpiece parting-off - 2x 3-jaw chucks, Schunk ROTA THW3 265-81 - Robo2Go loading and unloading system, consisting of: - 35 kg module - Drawer storage unit incl. additional drawer - Accessories on request Podpfx Ao Agr Ivjbujrc Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Unless otherwise agreed, sales between B&B customers are always without warranty.

Condition: excellent (used), Year of construction: 2020, operating hours: 23,850 h, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, table width: 1,100 mm, table length: 4,200 mm, table load: 1,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 11,500 h, spindle nose: HSK-A 63, number of slots in tool magazine: 120, Equipment: chip conveyor, CNC Bed-Type Milling Machine - Universal Manufacturer: DMG MORI Type: DMF 360-11 Year of manufacture: 2020 Control system: Celos with Siemens 840D sl Operate Technical Data Travel ranges: X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Main spindle: Speed ​​range - main spindle: 20 – 15,000 rpm Drive power - main spindle (100/40%): 46 / 30 kW Torque: 200 / 130 Nm Work table: Table clamping surface: 4,200 x 1,100 mm Rotary table: dia. 1,050 mm Max. table load: 1,200 kg Tool changer: Number of tool positions: 120 pos. Tool holder: HSK-A 63 Feed rates: Rapid traverse (X/Y/Z): 40 / 40 / 40 m/min Operating hours: approx. 23,850 h Spindle hours: approx. 11,500 h Technical features & accessories: - 5-axis simultaneous machining - NC swiveling milling head (B-axis) - Integrated rotary table, left-hand arrangement, hydraulically clamped Pedpfx Ae Agr Insbuerc - Full enclosure - Coolant tank - Direct measuring systems - Scraper-type chip conveyor - Internal coolant supply (ICS) 40 bar, includes: - Paper belt filter, 600 l - 2 rotating viewing windows - Air purge for linear measuring systems - Rotary union for spindle - Flush gun for... Chip flushing - 2x oil and emulsion mist extraction units - Air blast through spindle center - Infrared touch probe, Heidenhain TS 460 (if present) - Preparation for 3D quickSET - MPC – Machine Protection Control - Operating Mode 4 - ATC (Application Tuning Cycle) - Preparation for Hofmann RW-NC 300 rotary table (rotary table not included) - Pendulum operation - Tool breakage detection TRS2 - Tracyl cylindrical surface interpolation Accessories, tools, and workholding devices shown are included in the scope of delivery only if this is noted in the additional information. Unless otherwise agreed, sales between B&B customers are always made without warranty.

Condition: excellent (used), Year of construction: 2019, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, table load: 1,000 kg, spindle speed (max.): 20,000 rpm, spindle nose: HSK- 63A, number of slots in tool magazine: 60, tool length: 420 mm, Universal Machining Center Manufacturer: DMG MORI Type: DMU 95 monoBlock Year of manufacture: 2019 Control system: Celos with Siemens 840D sl Operate Technical Data Travel ranges: X-axis: 950 mm Psdpfxj Agr Igs Abusrc Y-axis: 850 mm Z-axis: 650 mm C-axis rotation range: 360° A-axis swivel range: +/- 120° Main spindle: Tool holder: HSK-63A Main spindle speed range: 20,000 rpm Main spindle drive power (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Rotary table: Table dimensions: C-axis Ø 850 x 750 mm integrated into Fixed table 1,000 mm x 750 mm Max. table load: 1,000 kg Max. workpiece dimensions: Ø 1,040 mm (clamping capacity) / Ø 850 mm (machining capacity) Height 590 mm Tool changer: Number of tool pockets: 60 positions Max. tool diameter: 80 / 160 mm Max. tool length: 420 mm Max. tool weight: 8 kg Chip-to-chip time: 5.9 s Feed rates: Rapid traverse (X/Y/Z): 40 m/min Feed rate (X/Y/Z): 40,000 mm/min Technical features & accessories: - Tool changing system with double gripper - MPC Machine Protection Control - Production package: Chip conveyor with coolant unit 600 l / 160 Gallons, Paper belt filter Internal coolant supply, 40 bar / 23 l/min, through-spindle (AD) External coolant supply, 4 bar – 40 l/min (theoretical pump capacity) Chip flushing in the cabin door (not a standard coolant unit) - Spray gun 3 bar – 40 l/min - Oil and emulsion mist separator, mechanical filter, throughput 600 m³/h - Renishaw PP60 optical infrared probe (OMP 60) (if present) - Blum laser, tool measurement in the machining area - 3D quickSET preparation - Electronic handwheel (if present) Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Unless otherwise agreed, sales between B&B customers are always made without warranty.

Condition: used, Year of construction: 2010, 2 CNC cylindrical grinding machines Manufacturer: Junker Type: Jumat 3000/50S Prjde Agr H Rjpfx Abujc Year of manufacture: 2010 Control system: Siemens The technical specifications can be found in the attachment (images 11–13). Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is explicitly stated in the additional information.

Condition: used, Roller Conveyors – 5 pcs (Höövik) Pedpfx Abo Agr H Aoujrc 5 modular gravity roller conveyors (roller tracks) made by Höövik. Mount them in racking or shelving systems at a slight incline, and cartons or crates roll forward by gravity. A practical solution for warehouses, picking areas and production lines. Quantity: 5 pcs Length: ~2750 mm Width: 1200 mm Height: 120 mm (per section), 830 mm (all 5 sections stacked) Total weight: 230 kg (all 5 sections) Galvanized steel frame, yellow plastic roller tracks Condition: in working order

Condition: good (used), Year of construction: 2016, machine/vehicle number: AP I 260800,