ETS Euro Tech Siam Co., Ltd.

Condition: used, Type ICS/C 1.6-838-2x8/115 Model: North - West spiral belt with 2 x 8 tiers nett belt width ± 830 mm product height: max. ± 150 mm Capacity: ± 1.000 kg/hr at 90min Siemens control Predpfxez Har Uj Aazjb Belt washing and drying system Additional in- and out-feed conveyor belts: 2-track Dimensions (l x w x h) : ± 10.300 x 4.660 x 2.780 mm yoc 2011 3 x 400V, 50 Hz, 160A

Condition: used, “FED” Drum Coater Type Crumb breader for dry coatings all stainless steel belt width 400 mm adjustable speed Pjdpsz Har Isfx Aazjrb min. 300 gr coating material adjustable angle fom 0 to 8° overall dimensions (L x W x H) : ± 4.400 x 1.450 x 1.800 mm infeed belt belt width 300 mm Elevating spiral screw

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: Prodpfx Asz Harzsazjb All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. Prjdpfjz Harnsx Aazjb all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 10 mm suitable for thermal oil heating (= 115 kW) oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system lifting unit with mechanical hoists suitable for fire protection overall dimensions (l x w x h) : ± 5.200 x 1.700 x 3.100 mm

Condition: used, all stainless steel electrically heated, 90 kW net belt length 3.000 mm net belt width 600 mm frying time min/max : 25/250s with lower and upper belt sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm Prodez Harhepfx Aazob suitable for fire protection weight : 2.750 kg oil level control circulation pump with Teflon infeed belt

Condition: used, for dry coatings all stainless steel belt width 630 mm adjustable speed with air knife Podpfxjz E Iclo Aazorb with vibration plate digital - touchscreen overall dimensions (L x W x H) : ± 3.100 x 1.500 x 2.100 mm

Condition: used, net belt width ± 600 mm total electrical power 33 kW thermal connection: NW32 2x5 tiers product height: ± 100 mm cooking time min/max : 4-40 min max. temperature: 200°C automatic elevator with belt wash system suitable for CIP-cleaning suitable for steam injection (heating and product yield): 4-8 bar, connection: NW 40 Prjdez E H Rzspfx Aazob turning to the left

Condition: used, Model CES-LT-LIN-9x0.66-PODB-SH suitable for nitrogen all stainless steel belt width ± 660 mm Pjdpfxjz E H N Rj Aazjrb nett belt length 9.000 mm total length ± 10.500 mm dimensions (l x w x h) : ± 10.500 x 1.431 x 2.230 mm 12 kW product height: max. ± 120 mm

Condition: used, suitable for nitrogen all stainless steel Prodpfjz E H Nwjx Aazeb belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm product height: max. ± 80 mm

Condition: used, Model CES/P-LT-LIN-8mx1.22-PODB-SH suitable for nitrogen all stainless steel belt width ± 1.220 mm nett belt length 8.000 mm dimensions (l x w x h) : ± 9.300 x 2.100 x 2.300 mm Pjdpfx Aajz E H Nkozsrb 14 kW product height: max. ± 120 mm

Condition: used, Freshline freezer MP Type IQF 1220.15/3070 suitable for nitrogen all stainless steel product height: max. ± 100 mm capacity: ± 5.000 kg / h product load (kg/running meter): ± 13-14 kg / running meter 400/460V, 50/60Hz, 3PH+PE, 110A, 32kW Pneumatic: 1Nm3/h at 5-7barg LIN pressure nitrogen 3barg net belt width ± 1.220 mm net belt length ± 16.800 mm Prsdpfsz E H Ndsx Aazeb dimensions (l x w x h) : ± 17.700 x 2.600 x 2.600 mm (max open) in very good condition

Condition: ready for operation (used), functionality: fully functional, Meat grinder LASKA W 130 . Podpjz E Daasfx Aazsrb

Condition: used, Year of construction: 2020, Manufacturer: Marel Model: Active Mixer 200 Year: 2020 Psdoz Er Daopfx Aazerb Condition: Used Serial number: 10446009 Stock number: 3302 Mixer capacity: 200 litres Water pressure: 2 - 5 Bar Power: 3 x 400V, 50Hz, 7kW Dimensions: 1250 x 950 x 1800 mm Weight: 400 kg Semi-automatic tempura and batter mixer with programmable recipe management.

Condition: new, new ! twin shaft paddle mixer all stainless steel variable speed Predpfxsz Ep D Do Aazjb microcontroller 2 mixing directions inspection gantry safety lid CE-approved with vacuum pump Büsch Easy clean 6,2 kW overall dimensions (l x w x h) : ± 1.950 x 1.000 x 2.260 mm + Loader for eurobins

Condition: used, all stainless steel suitable for thermal oil heating max. 435 kW suitable for fire protection infeed belt oil circulation system net belt length 7.000 mm net belt width 600 mm adjustable conveyor speeds sediment removal system filter upper and lower conveyor belts with new conventional-controlled electrical control box hydraulic lifting device dimensions (l x w x h) : ± 10.500 x 2.400 x 2.300 mm + Rotary filter Type RF-801 dimensions (L x W x H): ± 1.100 x 1.000 x 2.000 mm in good condition in good working order Full mechanical overhaul: New bearings, chains, seals, slide bushings, gears, … New motors/gearboxes for: oil circulation pump, conveyors, and waste transport system Oil bath fully re-insulated New grill belts, standard dimensions for snack products (to be discussed depending on product and customer specifications) All wear-sensitive parts replaced or fully refurbished General cleaning, overhaul, and structural inspection Full electrical overhaul + update of electrical cabinet and control: All electrical components and cables replaced Conventional push-button control with Jumo PID temperature controller Podpez Ep Dqofx Aazsrb New electrical diagrams (E-Plan) New sensors Component and cable coding

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas adjustable speed Podpfoz Ep A Hsx Aazsrb belt width ± 1.000 mm 270 kW, 411 amp canopy with electric hoists with a fine-mesh band Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 9.000 x 2.600 x 3.700 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New electrical heating elements: New folded heating resistances Completely new wiring Electrically tested, heated through, and measured

Condition: used, all stainless steel 3 tiers nett belt length ± 5.800 mm nett belt width ± 940 mm stainless steel mesh wire belt outside dimensions (l x w x h) : ± 7.200 x 1.400 x 2.900 mm + Evaporator "Goedhart B.V." Type LLK.s 411m² manufacturing number: PJV100282 Pjdpfx Asz Ep Ayoazjrb Year of manufacture: 2010 Capacity: 135 dm³ Refrigerant: NH3 Weight: 770 kg, Working pressure: 22 bar Test pressure: 32 bar Overall dimensions including cooling panels and stainless steel door: 7.500 x 2.700 x 3.300 mm

Condition: new, NEW ! all stainless steel suitable for eurobins of 200L Prsdpfx Aez Ep Atsazeb discharging height : ± 1.150 mm 0,37 kW can be operated from both sides mobile loading : max. 350 kg dimensions (l x w x h) : ± 1.020 x 1.250 x 1.150 mm

Condition: new, NEW! flaker for frozen products (fish, meat, vegetables, etc...) electrical power : 9,5 kW dimensions of the machine (l x w x h) : ± 2.100 x 1.070 x 1.150 mm capacity : ± 2.500 kg / h Psdpfx Aasz Ep Amszjrb for blocks of max. ± 470 X 600 X 200 mm 3 x 400 V

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, HANDTMANN GMD 99-2 | Ground meat portioning machine / Portioning dispenser Manufacturer: Albert Handtmann Maschinenfabrik GmbH & Co. KG Model / Type: GMD 99-2 (Type 99-2) Serial number: 33486 Year of manufacture: 2013 Prodpfxjz Ek Tgj Aazeb Belt / knife width: 220 mm / 220 mm Working clearance: 250 x 100 mm Overall dimensions: 1390 x 700 x 1230 mm The Handtmann GMD 99-2, a professional ground meat portioning machine (Ground Meat Divider), is an industrial device designed for the precise division of a continuously formed product stream into consistent portions. The machine works directly with Handtmann VF 600 series vacuum fillers (and GD grinding attachments), creating an automatic and efficient portioning system. The machine is used in meat processing plants, butcher shops, and catering and delicatessen facilities that focus on the production of packaged ground meat, cevapcici, burgers, roasts, or vegetable-based products. Thanks to its 220 mm wide knife and precise pneumatic or mechanical cutting system, the machine guarantees high throughput and perfect aesthetics for the finished portion before it is placed on a tray or packaged in a flow wrapper.

Condition: used, Year of construction: 2013, Manufacturer: GEA Model: OptiDipper 650 Year: 2013 Condition: Used Serial Number: 87 Stock Number: 3254 Belt width: 650 mm Product height: max 50 mm Prjdpfoz Ei Icex Aazjb Filling: min 40 L Infeed conveyor length: 600 mm Outfeed conveyor length: 950 mm Power: 3 x 400V, 50Hz, 1.8kW Dimensions; 3850 x 1400 x 1350 mm Weight: 850 kg

Condition: used, Year of construction: 1998, Manufacturer: Gernal Model: HBV-K-M-250 Year: 1998 Condition: Used Serial Number: 98/00659 Stock Number: 3440 Volume: 4000 litres Capacity: max 2000 kg Diameter opening: 600 mm Vacuum pump; Busch, RA 0063 Prodjz Ei E Ispfx Aazsb Power: 3 x 380V, 50Hz, 4.8kW Dimensions: 3850 x 1550 x 2200 mm With Mikster MCM 023 controls. With hydraulic tilting system at backend to lift 150 mm for easy unloading.

Condition: new, (made by N & N) new ! all stainless steel capacity 300 L. (= ± 10CF) 3 x 400V, 5,5kW double Ribbon mixing arm dimensions: (l x w x h) : ± 1.900 x 670 x 1.740 mm (open lid : ± 2.140 mm) outfeed height : ± 720 + 20 mm Psdpfx Aaez Eilhozsrb safety lid CE-approved adjustable speed 2 mixing directions 5,5 kW Digital – touch screen with programs Perfectly suitable for dry products, such as: spices, ingredients, powders,…

Condition: used, all stainless steel with top hold down belt water circulation net belt length 8.000 mm Psdsz Eilbepfx Aazjrb net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 9.000 x 1.800 x 3.850 mm

Condition: used, FlowCook Prjdpfx Aajz Eikwozob all stainless steel suitable for thermal oil heating (300kW) belt length ± 13.000 mm belt width ± 600 mm outfeed conveyor belt washing system electric hoists for the lid steam pressure : 4-8 bar outside dimensions (l x w x h) : ± 15.000 x 2.200 x 3.000 mm