LENAS.C. Lech, Jolanta, Irena Nadobnik

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 2134 x 1016 x 762mm, Table 2134 x 914mm, table load 1814 kgs, Spindle Speed 8,100 rpm, Spindle taper BT40, Spindle Motor 30Hp, Bljdpfxj Ahww Dj Adhsp HAAS Control, 24 Station ATC, coolant, low volt light, swarf auger

Condition: used, Year of construction: 2000, overall weight: 12,000 kg, Used machining center from AXA Type VSC-1-4000-M/E Bleds Ahnq Sjpfx Adhop ISO 40 tool holder X / Y / Z = 4000 / 550 / 600 Heidenhain TNC 430M CNC control 22-position tool changer Tools not included.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few operating hours. * Machine designed for high chip removal capacity. * Prismatic guides on all axes. * Quadruple prismatic guide system on the Y-axis. * Extremely rigid structure. * Oil-fed guide lubrication system with automatic machine shutdown. * Renishaw tool presetter. * BT 50 spindle taper. * 18.5 kW high-torque motor. * Cutting torque: 580 N/m. * Chip removal capacity: 540 cm/min. * Okuma IGF OSP300 automatic conversational programming system. * Automatic force control and tool wear monitoring. * Parameterized automatic tool anti-collision system. * Communication ports via USB, PCMCIA card, and RS-232. * Tool life management and tool wear monitoring. * Automatic control of tool torque and stresses. * Table dimensions: 2,200 x 850 mm. * Maximum load capacity: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Spindle oil cooler. * Rapid traverse speed: 20,000 mm/min. * Tool magazine capacity: 36 tools. * Tool change time: 0.5 seconds. Bodpfs Ahna Rox Adhjlp * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system with 70 bar pressure. * 30-micron particulate filter system. * LTA smoke filtration equipment. * Hinged rear chip extractors. * Machine currently in production. * Can be inspected by a certified Okuma technician. * Condition: like new. * Extensive set of BT 50 collets. * Electrical transformer, documentation, parts list, electrical schematics, and programming and operations manual. * Machine weight: 20,500 kg. * Immediate delivery, unless sold immediately.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 19991798, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel range, X-axis: 2,500 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 550 mm Spindle mount: SK 50 MACHINE DETAILS CNC control: Heidenhain Voltage: 400 V Frequency: 50 Hz Total connected load: 40 kVA Weight: 2,000 kg EQUIPMENT Siemens motors and servo drives Preparation for 4th axis (4th axis not included) Bledpfx Ade Ahm Eyehjp Note: Without tools and clamping devices for the machine table & without mist extraction.

Condition: good (used), Year of construction: 2006, Ref. -No.: 10651 Manufacturer: CHIRON Type: Mill 2000 Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Country of origin: Germany Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Weight Of The Machine Ca.: 9,6 t Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Tool Interface: SK40 Bledj Ahkyaspfx Adhop Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Equipment: Screw chip conveyor with discharge to the left side Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power.

Condition: used, Year of construction: 2009, x-travel 3000 mm Bedps Ahklisfx Adholp y-travel 500 mm z-travel 600 mm

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 3,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller manufacturer: SIEMENS, controller model: sinumerik 840, total height: 2,800 mm, total width: 3,400 mm, overall weight: 32,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 32, product length (max.): 8,000 mm, number of axes: 4, This 4-axis DECKEL MAHO DMF 360L was manufactured in 2007. It features an impressive X-axis travel of 3,600 mm, Y-axis travel of 920 mm, and Z-axis travel of 820 mm. The machine has a spindle speed of 18,000 rpm and a tool magazine capacity of 32 positions. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMF 360L vertical machining centre we have for sale. Contact us for further details. • Feed rate: 100,000 mm/min • Table length: 4,000 mm • Maximum table load: 5–6 tonnes • Through-spindle coolant: Yes Additional equipment Bljdpfx Aj Ahhknedhjp • Measuring probe Technical Specification Taper Size HSK 63

Condition: used, Brand: IBARMIA B-50 Drilling capacity : 50 mm Table dimensions 520 x 620 mm Morse taper: 4 Maximum drilling depth 230 mm Motor power 3 cv Weight 700 kg Blods Ahhiqopfx Adhep Dimensions 62 X 58 X 250

Condition: like new (used), Year of construction: 2016, operating hours: 25,000 h, functionality: fully functional, total length: 6,500 mm, overall weight: 17,500 kg, Equipment: chip conveyor, documentation/manual, Machine in fully working condition, chip conveyor, 30-piece tool set, ISO 50. Bjdpe Ahfacefx Adhelp

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Vertical CNC machining center Chiron Mill 2000 Control system: Heidenhain TNC 640 Year of manufacture: 2023 Internal machine number: 82 Travel ranges: X-axis: 2,000 mm Y-axis: 895 mm Z-axis: 715 mm Clamping area: 2,600 x 910 mm Clearance diameter: approx. 1,150 mm Tool holder: HSK-A63 Tool magazine: 40 positions Spindle speed: 50 - 12,000 rpm Accessories: - NC rotary table with spindle - Water-cooled motor spindle Bedpo Agghdsfx Adholp - Integrated rotary table, Ø 500 mm - Measuring probe Blum TC54-10 - Coolant system KNOLL KF 400/900 - Chip conveyor KNOLL 600 K-3/4000 - 2 flushing nozzles

Condition: used, Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazak, controller model: MAZATROL 640M, table width: 760 mm, table length: 2,000 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 48, Vertical Machining Center Manufacturer: MAZAK Model: VTC 300C II Year of manufacture: 2007 Control system: MAZATROL 640M Technical details: X-axis travel: 1,740 mm Y-axis travel: 760 mm Z-axis travel: 660 mm Table dimensions: 2,000 x 760 mm Spindle speed: 12,000 rpm Tool taper: SK 40 Number of tool positions: 48 Approx. weight: 11,500 kg Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved! Bledpfx Ae Agcifsdhep

Condition: excellent (used), Year of construction: 2007, travel distance X-axis: 1,950 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 770 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC530, controller model: HeidenHain iTNC530, total height: 3,600 mm, total length: 14,200 mm, total width: 4,800 mm, table width: 1,200 mm, table length: 2,500 mm, table load: 5,000 kg, rotary table diameter: 1,250 mm, overall weight: 37,000 kg, spindle speed (max.): 6,000 rpm, coolant supply: 20 bar, spindle motor power: 40,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Heavy-duty CNC machining centre for large and complex workpieces! For sale: HEDELIUS RS 125 K MAGNUM, a powerful and versatile CNC machining centre designed for precision machining of large, heavy and complex components. The RS 125 K MAGNUM combines a large working area with a rigid machine construction, high-performance milling capabilities and flexible multi-axis machining. Its travelling-column design provides excellent accessibility, efficient chip removal and outstanding flexibility for machining long workpieces as well as complex components requiring multiple machining operations. Key features & advantages: Large working envelope for oversized workpieces. Swivelling milling head for flexible machining operations. High rigidity and stability for demanding milling applications. Suitable for both single-piece production and small to medium production batches. Excellent accessibility for loading and unloading large components. Typical applications: Ideal for general mechanical engineering, machine building, steel fabrication, tool and mould making, energy equipment, aerospace components and heavy industrial machining. Available for inspection by appointment. X - Travel: 1950mm Y - Travel: 1250mm Z - Travel: 770mm B - Axis: 360000° Table Length: 2500mm Table Width: 1200mm Table load: 5000 Table Ø: 1250mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 40kW Speeds / ranges: 6000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Blodpo Af Itcsfx Adhsp Coolantsystem: yes Length: 14200mm Width: 4800mm Height: 3600mm Weight: 37000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, controller model: Heidenhain TNC 407, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 420 mm Z-axis travel: 480 mm Table length: approx. 3,000 mm Table width: approx. 500 mm Spindle speed: up to 6,000 rpm Tool holder: SK 40 Tool positions: 22 MACHINE DETAILS Control system: Heidenhain TNC 407 EQUIPMENT Bjde Afxrqspfx Adhslp 22-position tool changer Coolant system Heavy-duty frame construction Additional angular/universal milling head 4/5-axis machining possible

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Bljdpfe Afxnrox Adhsp Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: excellent (used), USED HARTFORD HB2190AG FANUC 21iMB YEAR USED - ORIGINALLY BUILT 2009 MACHINE SN 12842 DOUBLE COLUMN, BRIDGE TYPE VERTICAL MACHINING CENTRE WITH HARDENED & GROUND BOX GUIDEWAYS FOR ENHANCED CUTTING PERFORMANCE MACHINE CONSTRUCTION FEATURES & EQUIPMENT  ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION.  HEAVY DUTY HARDENED AND GROUND BOX GUIDEWAYS.  FULL HEIGHT SPLASH GUARDING.  MODIFICATION TO SPLASH GUARD TO ACCOMMODATE 4.1 M LENGTH OF PART.  INTERNAL SPIRAL CHIP CONVEYORS.  LINK TYPE CHIP CONVEYOR AND CHIP BUCKET.  Z-AXIS NITROGEN COUNTER BALANCE SYSTEM.  HARTROL-FANUC 21iMB CNC SYSTEM.  25 BAR THROUGH SPINDLE COOLANT.  COOLANT GUN.  CE MARKED TABLE Working Surface 2,100 X 1,740 MM Tee Slot (Size x Number x Pitch) TBA MM Maximum Table Load 7,000 KGS TRAVEL Longitudinal Travel (X-Axis) 2,000 MM Cross Travel (Y-Axis) 1,970 MM Vertical Travel (Z-Axis) 920 MM Distance from Spindle Nose to Table 160 ~ 1,080 MM Distance from Spindle Centre to Column 430 MM Width between Columns 2,200 MM SPINDLE Spindle Nose Taper #50 - DIN69871 Maximum Spindle Speed 6,000 RPM GEARED Spindle Drive GEARED FEED Cutting Feedrate (X, Y & Z Axes) 1 ~ 7,000 MM/MIN Rapid Traverse (X-Axis) 10 M/MIN Rapid Traverse (Y-Axis) 10 M/MIN Rapid Traverse (Z-Axis) 10 M/MIN ATC Bodpfe Afnadox Adholp Tool Storage Capacity ARM TYPE 40 STATIONS Maximum Tool Weight 15.0 KGS Maximum Tool Size Ø 125 X 350 MM Tool Shank DIN 69871 Pull Stud P50T-1 MOTORS Spindle Drive Motor (Fanuc) 26.0 KW POWER SUPPLY Electric Power Consumption 50 KVA Air Pressure 6.5 KG/CM² Voltage 415V / 50HZ / 3PH MACHINE Floor Space (Fully Guarded) TBA MM Height TBA MM Weight 28,000 KGS

Condition: excellent (used), Year of construction: 2007, TOP CONDITION - OVERHAULED IN 2026! Year of construction: 2007 Table format: 3000 x 1500 x 250 mm Power: 2500W Bodpo Afix Iefx Adhjlp Control: Fanuc incl. cooler incl. pipe axis incl. 5 axis 3D torch incl. programming software incl. training incl. commissioning incl. ball roller table FE: up to 20mm VA: up to 12mm oxide-free designed for high pressure cutting up to 20 bar No Foundation is necessary! Optional automatic loading and unloading by Mazak CELL510 could be offered with warranty / commissioning / training always regularly serviced

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, total length: 5,500 mm, total width: 2,700 mm, table width: 711 mm, table length: 2,134 mm, overall weight: 11,650 kg, spindle speed (max.): 8,100 rpm, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, CNC Milling Machine HAAS VF-7/40 TECHNICAL DATA: - Date of manufacture September 2014 - X 2 134 mm - Y 813 mm - Z 762 mm - Control HAAS - Spindle speed max. 8 100 rpm - Table size 2 134 x 711 mm Bodpfx As Adzgzsdholp - Spindle nose to table 102 – 864 mm - Tool magazine 31 positions (SK40) - Spindle power 22.4 kW - Chip conveyor - Machine dimensions 5.5 x 2.7 x 3.3 m - Weight approx. 11 650 kg Machine in very good technical condition, connected to power – it can be inspected and tested on site by prior appointment. Professional loading is included in the price. Accessories, tooling and clamping devices shown in the photos are part of the offer only if listed under equipment. Technical data is for reference only and may contain inaccuracies. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 1998, Available immediately, ex works: Vertical CNC machining center, SW Schwäbische Werkzeugmaschinen Type BA 35 300 Year of manufacture: 1998 CNC control: Siemens 840 D Travel distances X/Y/Z: 2650/500/500 mm Swinging operation possible: 2 x 750 mm Spindle: 17 kW Tool holder: SK 40 Chain magazine: 36 positions Spindle speeds up to 10,000 rpm Chip conveyor Weight: 9 tons Price: EUR 6,500.00 plus VAT, ex works. Bsdpfx Ade Adnwashelp

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 01374, travel distance X-axis: 3,020 mm, travel distance Y-axis: 720 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC430, total height: 3,530 mm, total length: 6,740 mm, total width: 3,450 mm, table width: 650 mm, table length: 3,900 mm, overall weight: 14,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 28, Equipment: chip conveyor, documentation/manual, In good working condition and well mainteined. Still in work and ready for inspection and fast delivery. Bljdpfe Aa I Nuex Adhep

Condition: ready for operation (used), Year of construction: 2007, Key Technical Specifications • Type: 3-axis vertical machining center / traveling-column milling machine • Travels (X / Y / Z): 2,200 mm / 560 mm / 720 mm (approx. 220 cm X-axis) • Table Size (L x W): 2,600 x 600 mm • Maximum Table Load: 2,200 kg • Spindle Speed: Up to 18,000 RPM (common configuration for this model variant) • Tool Taper: SK 40 • CNC Control Unit: Heidenhain iTNC 530 • Machine Weight: Approximately 12 tons Bjdpfx Ajz Tc E Sodhslp

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 60, tool weight: 8,000 g, number of axes: 5, This 5-axis DOOSAN VCF850LSR-II was manufactured in 2021. It features an impressive X-axis travel of 3,000 mm, Y-axis travel of 850 mm, and Z-axis travel of 800 mm. The machine includes a robust tool magazine capacity of 60 tools and a maximum load on the fixed table of 3,500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VCF850LSR-II vertical machining centre we have for sale. Contact us for further details. • Operating hours: approx. 2,500 effective hours • Travels: • B-axis: ±110° • C-axis: ±360° • Rapid traverse (X/Y/Z): 40 / 40 / 40 m/min • Max working feed (X/Y/Z): 20,000 mm/min • Spindle: • Power: 24 / 30 kW • Max torque: 121 / 155 Nm • Taper: ISO 40 • Tool magazine: • Capacity: 60 tools Blodpjz S Hz Uefx Adhsp • Max tool dia.: 76 mm (130 mm with adjacent positions free) • Max tool length: 300 mm • Tool-to-tool: 5.5 s • Chip-to-chip: 13 s • Workholding/table: • Fixed table: 3,500 × 870 mm, max load 3,500 kg • Rotary table: Ø 800 mm, max load 1,200 kg • Max workpiece Ø: 1,050 mm • Max workpiece height: 680 mm (vertical) / 1,095 mm (horizontal) • Measurement: Absolute linear scales on X/Y/Z • Features: Removable central door; Pendulum machining capability • Utilities: • Electrical: 400 V / 3 phases + ground • Required power: 63 kVA • Compressed air: 6 bar • Coolant tank capacity: 560 l • Condition: Very well maintained • Operational status: In production / under power • Extras: Videos with timestamp available on request • Transport: Reportedly can be transported in one piece Additional equipment • High-pressure through-spindle coolant, 70 bar • Cyclone coolant filtration • Chip conveyor • Renishaw RMP-60 workpiece probe • Renishaw RTS tool setting system • Original kinematic calibration ball • Heidenhain Advanced Function Set 1 • Heidenhain Advanced Function Set 2 • Dynamic Collision Monitoring (DCM) • Lift-Off function • DXF converter • 3D toolpath visualization • 3D machining simulation • CAD Viewer • Automatic lubrication system • Hydraulic unit • LED work area lighting • 3-color alarm lamp • CE documentation • Machine manuals Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2005, Control system: Siemens Sinumerik 840 D / PCU 50 Travel range X 2300 mm Travel range Y 800 mm Travel range Z 600 mm Working areas in tandem operation 2 × 925 × 800 mm Main spindle 30 – 8000 rpm Spindle power 27.0 kW Spindle torque 244 Nm Machine bed: torsionally rigid, stress-relieved welded construction. Guidance system: roller guides Measuring system: direct path measuring system / glass scales on X, Y, and Z axes Resolution measuring system 3 μm / 1000 mm Feed drives: digital three-phase servo motors Feed rate up to 30 m/min Main spindle: water-cooled CELOX motor spindle Tool holder HSK A63 Spindle power 20.0 kW / 18.3 Nm Spindle speed 12,000 rpm Spindle cooling: cooling unit with closed circuit. Spindle orientation freely programmable Tool magazine: rotary tool magazine Tool positions 56 Tool holder magazine HSK A63 Max. tool length 330 mm Max. tool weight 10 kg Max. tool diameter 80 mm Magnum version C80/2300: 56-position Magnum tool magazine Spindle speed 12,000 rpm / 29.0 kW Operating panel BHG / 840D, external Signal light 1-fold Hollow shank taper HSK A63 / 12,000 rpm Compressed air nozzle on the spindle head, controlled by M-function Full enclosure 80 × 2300 Exhaust filter MultiAir exhaust filter Extraction capacity 1200 m³/h Filter stage 1 Metal filter, class G Main filter AeroPlus, class F9 Bljdpfx Aoz R R Dnsdhsp Flushing guns 1 pair, 3 bar / 20 l/min Working area partition C80, manually swiveling in/out Load direction cabinets C80, for tool measurement/inspection Max. tool length load direction cabinet 230 mm Max. NC rotary table RT 500 Max. pickup magazine T3/W2 NC rotary table RT 250 The machine was also supplied with a vertical NC rotary table RT 250, including hydraulic spindle clamping and faceplate. Technical data RT 250: Part accuracy 15″ ± Repeat accuracy 4″ ± Center height 160 mm Runout 0.015 mm Flatness 0.015 mm Bore in rotary table 60 mm Speed max. 22 rpm Faceplate Ø 250 mm Bore in faceplate 35 H7 T-slots DIN 605 12 mm Number of T-slots 4 pcs Drive torque 300 Nm Holding torque 1000 Nm Tilting moment 1200 Nm Transport load 120 kg with tailstock 250 kg Weight approx. 60 kg 2-point transformation optional Further components: - 2 x compressed air guns with quick coupling, spiral connection hose, and holder. - 1 x flushing gun, flushing pressure: 3 bar / 20l/min. - 1 x anchor screws x 2300 - 1 x laser light barrier - 1 x working area partition - 1 x 3D wireless probe system Renishaw RMP 60: System 3D wireless probe system Switching 3D probe stylus yes Transmitter/receiver unit yes Battery 9 V Probing accuracy ± 2 μm Probing speed 3 m/min Probe stylus length 50 mm Ball diameter 6 mm (ruby) Repeat accuracy < ± 2 μm

Condition: like new (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 760 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Heidenhain, workpiece length (max.): 3,260 mm, workpiece width (max.): 1,700 mm, table load: 10,000 kg, overall weight: 23,000 kg, spindle speed (max.): 10,000 rpm, spindle nose: BT50, AWEA DOUBLE-COLUMN MACHINING CENTER TECHNICAL SPECIFICATIONS Brand: Awea Model: SP-3016 Bodpfx Aez R Ducsdhslp CNC: Heidenhain Spindle: BT50 (10,000 Rpm) X: 3060 mm Y: 1600 mm Z: 760 mm Distance between spindle and table: 200 - 960 mm Distance between columns: 1700 mm Table: 3260 mm x 1500 mm Maximum load capacity on table: 10 tons Internal coolant system Chip extractor PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: good (used), Year of construction: 2011, operating hours: 46,500 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 3,600 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, nominal power (apparent): 130 kVA, controller manufacturer: Siemens, controller model: 840SE, workpiece length (max.): 3,600 mm, workpiece width (max.): 1,100 mm, workpiece diameter (max.): 1,100 mm, workpiece weight (max.): 5,000 kg, total height: 3,042 mm, total length: 9,280 mm, total width: 4,608 mm, table width: 1,100 mm, table length: 4,200 mm, table load: 5,000 kg, rotary table diameter: 1,050 mm, rotational speed (max.): 50 rpm, overall weight: 32,050 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 21,500 h, coolant supply: 40 bar, spindle nose: HSK 63, number of slots in tool magazine: 120, mount diameter: 1,050 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, DMF 360 linear, manufactured in 2011, with Siemens 840D Solutionline control 120-position tool changer HSK 63 tool interface Bljdpfxoz Riy Ro Adhsp Spindle speed 18,000 rpm Chip conveyor Coolant system, 1000 liters, 80/40 bar Work area enclosure 3D probe, Heidenhain Blum laser Handwheel Air blow through the spindle Coolant nozzle Automatic doors A-axis, Lehman EA 420 Hydraulic clamping system for rotary table Robot interface Oil and emulsion mist separator

Condition: good (used), Year of construction: 2018, operating hours: 3,575 h, machine/vehicle number: 108.008.00.0055, total height: 3,417 mm, total length: 4,680 mm, total width: 4,471 mm, table width: 850 mm, table length: 2,100 mm, overall weight: 19,500 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 1,010 h, coolant supply: 20 bar, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron VCE 2000 Pro * 3-axis machining center * X-axis travel: 2000 mm * Y-axis travel: 900 mm * Z-axis travel: 800 mm * Table size: 2100 × 850 mm * Maximum table load: up to 3000 kg The machine features the following technical equipment: Control system: Heidenhain TNC 620 Bjdpfx Adjz Nh R Eehelp Spindle speed: 10,000 rpm Tool holder: SK 40 High-pressure pump: 20 bar Tool magazine: 30 positions Preparation for a 4th axis The machine is located in Eschweiler.